Using a SubTabBar inside a Template

Does anyone have a template that contains a SubTabBar?
I am using subtablayout/subtabbar in my pages and it works great. However, when I put them in my template, then when using the template in my pages, the page items are rendered outside of the subtabbar as opposed to inside of it.
How do I set up the template and pages so that the subtablayout/subtabbar is in the template?
Thanks,
Connie

You can Add content preseneter and also check whether you hav put all the footer requirements in the UCM and that should be in released mode.
After adding to the page you can choose the template summary to show in the desired view...
here is the complete step by step process yo can go through it.
http://docs.oracle.com/cd/E17904_01/webcenter.1111/e10149/content_cp.htm
Regards,
Santosh.

Similar Messages

Using Content Presenter inside Page Template

Hi all,
I want to show content of footer from UCM, so I used Content Presenter in the Footer to do it.
But I only can see the content when the template at the Edit mode and in the Preview Mode or normal mode I can't see anything
Do you have any suggestion for me
Thanks a lot!

You can Add content preseneter and also check whether you hav put all the footer requirements in the UCM and that should be in released mode.
After adding to the page you can choose the template summary to show in the desired view...
here is the complete step by step process yo can go through it.
http://docs.oracle.com/cd/E17904_01/webcenter.1111/e10149/content_cp.htm
Regards,
Santosh.

Is it possible to use format-currency() inside set_variable()?

Hi gurus,
I have a few numbers to sum up for the report, and I want to round the numbers according to the currency before they are summed up. What is the best way to achieve this?
The way I can think of is:
To around the number I can use <?format-currency:VALUE; CURRENCY; 'false'?> in the template. Then initialize a variable SUBVALUE=0 and then add each rounded numer to this variable:
<?xdoxslt:set_variable($_XDOCTX, 'SUBVALUE’, xdoxslt:get_variable($_XDOCTX, 'SUBVALUE’) + (format-currency:VALUE; CURRENCY; 'false'))?>
However, I'm getting error indicating that I can't use format-currency:VALUE inside set_variable() in this way...Am I using the function wrongly? Or is there another function that can achieve this?
Appreciate your help :)
Sophy

Hi Tim,
As you said, the reason that why I have to add after rounding is to avoid the 0.01 issue. Our PM requires the numbers shown in report to be mathematically correct, so if we add before rounding then we'll have sub-toatal and totals different by 0.01 or so.
And since I need to round the values according to the currency, I can't round it in the query...I have to use format-currency in the template to do the rounding.
Thanks :)
Sophy

Webcenter Services inside adf Template

Is it possible to insert webcenter services (like search or documents) in a site template? So instead of inserting services in every page, it would be inside the template and load in everypage that included the template. I´m using Jdev 11g. Thanks!

I think it should be possible. Just try it :)
Create a template and drop a webcenter taskflow on it and see if it works :) Nothing will explode if it doesn't work :)

Using Task Flow in the template page

Dear all,
I am beginer and I work with JDev 11.1.1.3.0
In my application I've got a template page called 'templateDef1.jspx'. In this page on the top facet I've got two commands link: 'Asort' and 'Reports'.
I've created a new JSF page called 'main.jspx' which is based on the templateDef1 and in the center facet I dropped an ADF Bounded Task Flow as a Region. This bounded task flow contains two pages ('asort.jsff' and 'report.jsff'). When I run the main.jspx page I can navigate from 'asort' to 'report' page fragment using the button inside the page fragments.
Now I want to navigate to those page fragments using the commands link from 'templateDef1.jspx'. What should I do ?
I've tried several things but nothing works.
Any help will be appreciated.
Regards,
Wojtek.
Edited by: kojot on 2011-01-13 03:55

Thank you a lot for you replies.
Amit, I tried your solution but something doesn't work. I think the parameter isn't passing into the task flow.
In my template page, after I added <af:setActionListener> I got two warnings: Reference "PageFlowScope.Flow" not found.
The ref Center facet is refreshing properly, but it always displays the assort.jsff, because it is marked as default activity in my task flow.
Here is the fragment of code of template page:
<af:commandLink id="clAsort">
                  <af:panelGroupLayout id="pt_pgl2" halign="center"
                                       valign="middle" layout="vertical">
                    <af:image source="/ikony/asortyment.jpg" id="pt_i1"
                              shortDesc="Asortyment"/>
                    <af:outputLabel value="Asortyment" id="pt_ol1"
                                    inlineStyle="color:Blue;"/>
                  </af:panelGroupLayout>
                  <af:setActionListener from="#{'A'}"
                                        to="#{pageFlowScope.Flow}"/>
                </af:commandLink>
                <af:spacer width="30" height="10" id="pt_s1"/>
                <af:commandLink id="clReport">
                  <af:panelGroupLayout id="pt_pgl3" halign="center"
                                       valign="middle" layout="vertical">
                    <af:image source="/ikony/raporty.jpg" shortDesc="Raporty"
                              id="pt_i2"/>
                    <af:outputLabel value="Raporty" id="pt_ol2"
                                    inlineStyle="color:Blue;"/>
                  </af:panelGroupLayout>
                  <af:setActionListener from="#{'R'}"
                                        to="#{pageFlowScope.Flow}"/>
                </af:commandLink>And the code of the whole task flow definition:
<?xml version="1.0" encoding="windows-1250" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<task-flow-definition id="page-frag-task-flow">
    <default-activity id="__1">asort</default-activity>
    <data-control-scope id="__24">
      <shared/>
    </data-control-scope>
    <input-parameter-definition id="__12">
      <name id="__13">Flow</name>
      <value>#{pageFlowScope.Flow}</value>
      <class>java.lang.String</class>
    </input-parameter-definition>
    <view id="asort">
      <page>/fragments/asort.jsff</page>
    </view>
    <view id="raport">
      <page>/fragments/raport.jsff</page>
    </view>
    <router id="router1">
      <case>
        <expression>#{pageFlowScope.Flow == 'A'}</expression>
        <outcome id="__18">asortView</outcome>
      </case>
      <case>
        <expression>#{pageFlowScope.Flow == 'R'}</expression>
        <outcome id="__23">raportView</outcome>
      </case>
      <default-outcome>raportView</default-outcome>
    </router>
    <control-flow-rule id="__2">
      <from-activity-id id="__3">asort</from-activity-id>
      <control-flow-case id="__4">
        <from-outcome id="__6">viewRaport</from-outcome>
        <to-activity-id id="__5">raport</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <control-flow-rule id="__7">
      <from-activity-id id="__8">raport</from-activity-id>
      <control-flow-case id="__10">
        <from-outcome id="__11">viewAsort</from-outcome>
        <to-activity-id id="__9">asort</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <control-flow-rule id="__14">
      <from-activity-id id="__15">router1</from-activity-id>
      <control-flow-case id="__17">
        <from-outcome id="__19">asortView</from-outcome>
        <to-activity-id id="__16">asort</to-activity-id>
      </control-flow-case>
      <control-flow-case id="__20">
        <from-outcome id="__22">raportView</from-outcome>
        <to-activity-id id="__21">raport</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <use-page-fragments/>
</task-flow-definition>
</adfc-config>In main.jspx page, after I dropped the task flow as region, I left the parametersMap blank and I set the value to the parameter Flow as #{pageFlowScope.Flow}. Am I doing it right ? I have to missed something becuase it doesn't work.
I also read ADF Handbook and some blogs to get know how to pass parameters into bounded task flow, but I couldn't solve my problem.
Regards,
Wojtek.

Can we use IF statement in PDF templates

Hi,
I developed a PDF template. I need to underline ang bold the records based on a specific condition. Can we use IF conditon in PDF templates. Please suggest.
Thanks...

Billy Verreynne wrote:
The case syntax is a bit funny though as there's not a single condition evaluation (like a DECODE or case structs from some other languages).
This is what I would expect a typical case struct to look like - evaluating a single condition:
case <condition>
when <value-1> then return <result-1>
when <value-n> then return <result-n>
else
return <return-z>
end
?:| You mean like this...?
SQL> ed
Wrote file afiedt.buf
1 select empno, ename, deptno
2        ,case deptno
3           when 10 then 'This is Department 10'
4           when 20 then 'And department 20'
5           when 30 then 'And of course department 30'
6         else
7           'Blimey it is something else!'
8         end as dept_desc
9* from emp
SQL> /
     EMPNO ENAME          DEPTNO DEPT_DESC
      7369 SMITH              20 And department 20
      7499 ALLEN              30 And of course department 30
      7521 WARD               30 And of course department 30
      7566 JONES              20 And department 20
      7654 MARTIN             30 And of course department 30
      7698 BLAKE              30 And of course department 30
      7782 CLARK              10 This is Department 10
      7788 SCOTT              20 And department 20
      7839 KING               10 This is Department 10
      7844 TURNER             30 And of course department 30
      7876 ADAMS              20 And department 20
      7900 JAMES              30 And of course department 30
      7902 FORD               20 And department 20
      7934 MILLER             10 This is Department 10
14 rows selected.

I am using the big date calendar template and when I submit it to apple for printing I lose the name of two months. These names are not text boxes. I see the names when I send it in but something happens during the transmission to apple. It was suggested

I am using the big date calendar template in iPhoto. I am on Lion 10.7.2, macbook air. The names of the months are on each calendar page but something happens when I send the data to Apple. The names are part of the template. They are not text boxes. I lose two names on the calendar after it is sent to Apple. Apple suggested I make a pdf file of my calendar before sending it in and check to make sure every name shows. I did this with a calendar I just sent in. The calendar was correct. All names of the months were showing. After sending the data two month names disappeard because when it arrived by mail, it was incorrect. Apple looked at my calendar via a pdf file and it was incorrect. This is second time this has happened. I called Apple and they had me delete several folders in the Library folder, some preferences and do a complete reinstall of iPhoto. I have not yet remade the defective calendar. I am wondering if anyone else has had this problem?
kathy

Control-click on the background of the view all pages window and select "Preview Calendar" from the contextual menu.
You can also save the pdf as a file to compare to the printed calendar. If the two names are visible in the pdf file then the printed copy should show them. Contact Apple for a refund. Apple Print Products - Apple Store (U.S.)

How do we use if statement in labview?moreover can i use if statement inside for loop?

how do we use if statement in labview?moreover can i use if statement inside for loop?

The if statement in LabVIEW is the Case structure. You can find that on the Structures palette right next to the For Loop. If you're still on the same subject about terminating a for loop early, then what you do is enclose your functions inside the loop with a case statment and make one of the case's empty except for one or more constants that you might have to wire. Hopefully, the attached picture will explain what I mean. Also, as I mentioned in one of your other posts, I think this technique is not as good as using a while loop. The array in the attached example is the same size no matter what and you may have to handle stripping extra or invalid elements.
Attachments:
For_Loop_with_Case.jpg ‏21 KB

Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?

Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.

Hi Jay,
SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
once on each server, and then the variable can be used by all the packages on this server.
Regards,
Mike Yin
TechNet Community Support

Using Office 2013 group policy template to define Trusted Locations and Template Locations doesn't work

User Configuration/Policies/Administrative Templates
- Using Office 2013 group policy template to define Trusted Locations and Template Locations doesn't work
Microsoft Word 2013/Word Options/Security/Trust Center/Trusted Locations
- Allow Trusted Locations on the network:
Enabled
- Trusted Location #1:
Enabled
Path: //server/sharedfoldername [Edit: Path:
\\server\sharedfoldername]
Date: June 10, 2013
Description: Trusted Location
Allow sub folders: Enabled
The policy appears to apply to the client correctly by adding the following registry key and values:
HKEY_CURRENT_USER\Software\Policies\Microsoft\office\15.0\word\security\trusted locations\location1
allowsubfolders: 1
date: June 10, 2013
Description: Trusted Location
Path: //server/sharedfoldername [Edit: Path:
\\server\sharedfoldername]
However, when you open Word Options/Trust Centre/Trust Centre Settings…/Trusted Locations
There are no trusted locations listed under ‘Policy Locations’
I have tried setting similar settings for setting the Shared Templates folder location and just like the trusted locations policy, the registry keys are created properly in HKEY_CURRENT_USER\Software\Policies however word doesn’t
seem to recognize these either.
This used to work flawlessly using the administrative templates for Word 2007 and 2010. Has anyone been able to get these policies to apply successfully, or know why office doesn’t recognize these settings from the Policies registry
Key?

This would have been an easy solution to the issue. Unfortunately it isn't the problem. This question was originally posted on another Microsoft site and
was transferred here and when it was transferred the path's changed from the original post:
\\server\sharedfodlername to //server/sharedfoldername. (I will edit the question to show up as it did in the original post) Not sure how that happened. This
is still an issue that I haven't been able to get working correctly.
As it turns out the 'New from Template' interface Word 2013 has developed is very bulky with large thumbnails and is not very customizable nor practical for an office
that has a large number of templates. Because I am unsatisfied with the display and performance of the 'New' template chooser I sought after a solution to change the way word creates a document from a template in another thread:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/how-can-you-change-the-display-of-templates-in/d49194b9-a6b4-4768-8502-7d7b50e9dd65 working through this issue with Jay we were able to develop
some VB script with handles a very large number of templates in a list view and it works much faster than the built-in Word interface. The above thread is how I've worked around trying to define a shared template location and I am quite happy with it.

How do I use fsg:ColHeadLine1 in a template?

I have created an FSG report and need to publish it with BI Publisher. The report should have columns with month names across the top, but the data may be "Actual" or "Budget".
The data is contained in fields called <fsg:ColHeadLine1>, <fsg:ColHeadLine2>, etc.
<fsg:ColHeadLine1></fsg:ColHeadLine1>
<fsg:ColHeadLine2> Jan </fsg:ColHeadLine2>
<fsg:ColHeadLine3> Actual </fsg:ColHeadLine3>
I am not certain how to use this in my rtf template to print the column headers?

Have you tried checking the Oracle provided template for FSG ("FSG: Basic Template" - RGFSGXPB.rtf)? Works okay and could show you how the fields could be used in a template... (if you could find it from the XMLP Admin - template, you might need the patch for FSGXML)
regards,
Rownald

How to use analytical functions inside a mapping

Hello everybody. Here Isend you a trick that we are using for two years.
If you want to use a function (for instance :ROW_NUMBER() OVER (PARTITION BY ... ORDER BY ...)) inside a mapping you must create an expression with in the INGRP1 the fields you are going to use in the window function and in the OUTGRP1 the function you want. Create an Out -attribute with the expressión and link it to a distinct operator (using a "distinct" you encapsulte the sql and you will be able to use the function inside a filter - in the where clause.). The distinct can eliminate some register (depends on the function). If you validate the expression an error will appear (don't worry about that, the mapping will be ok).
But there is a limitation, you will not be able tou sum over, min over, max over (it detect that they are aggregator functions). Other limitation: the debugger doesn't run with this kind of functions.
Please publish this information on "The Warehouse Builder Utility Exchange". Mi email is [email protected] (if you need more information)

It is possible to add SUM, MIN, MAX functions also to OWB releases prior to Paris - You have to put them in double quotes - write "MIN" "MAX" "SUM" etc. The rest of the rules (adding cut-off operator after the expression - as DISTINCT, or UNION ALL) is analogical to with ROW_NUMBER()
That means You can create mapping with following functionality:
SELECT
sum (salary) over (partition by DEPARTMENT) department_salary,
salary,
employee_id,
employee_name
FROM employees_salaries
writing it this way in OWB:
SELECT
"SUM" (salary) over (partition by DEPARTMENT) department_salary,
salary,
employee_id,
employee_name
FROM employees_salaries
Regards,
Martin

SMARTFORMS :How to print an inernal table inside a template cell?

Hi all,
I have a smartform which contains a template.
I want to print inside a cell of the template the content of an internal table.
Is this possible ?if yes , how to do that ?
Thanks.

Yes, it is possible.
Create inside your template a loop. Then create inside a text which you address as i.e. row 1, column 1 of your template (cell address).
Now when looping through your table it will place all data in some work area .i.e wa. In your text provide name of the components you want to dispaly i.e. &wa-comp1&.
Please note, that length of your template must be long enought to fit all tables entries.
Regards
Marcin

Custom sendemail in sharepoint 2013 designer workflow using dictionary object with email template from list

I am looking for custom sendemail in sharepoint 2013 designer workflow using dictionary object with email template from list
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Greetings.
pls check if it helps you.
http://msdn.microsoft.com/en-us/library/office/jj554504(v=office.15).aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

Is there a way to use EJBs directly inside WDJ without Model generation?

Hello,
Is there a way to use EJBs directly inside WDJ without Model generation, to avoid producing tonnes of code and reuse the JPA Entities?
Thanks
Sebastian
Edited by: Sebastian Lenk on Nov 3, 2010 7:01 PM

of course, you can.
it's pure java programming.
Context ctx = new InitialContext();
   Object o = ctx.lookup(
"sap.com/HelloWorldEAR/REMOTE/HelloWorldBean/com.sap.sdn.ejb.HelloWorldRemote");
   HelloWorldRemote helloRef = (HelloWorldRemote)
    PortableRemoteObject.narrow(o, HelloWorldRemote.class);

Using a SubTabBar inside a Template

Similar Messages

Maybe you are looking for