Using an additional Keyboard as inputs

Hello, I hope this is the place to post this. I have never used a forum before. Anyway, I am creating sort of a monitor and control system, or home alarm system. I have been trying to find the best way to have inputs, experimenting with parrellel input ect. And then I took apart an old keyboard I had and there it was. The tell all of imputs. I can create over 200 differnt key codes with only 28 wires, there is a matrix of 9 and 17 on the keyboard I am working on. But anyway, key [d] could be the doorbell input, and key [m] could be the motion sensor ect. The only problem is that if I program it with just the one keyboard we all normally have, you have to disconnect the keyboard and plug in the other one after you start up the program. I am wanting to add maybe a usb keyboard to the computer and have 2 keyboards, one ps2 keyboard(normal operation) and one usb keyboard (inputs). Does anyone know how to approach this and tell java to listen for keyboard inputs in the secondary (usb) keyboard? Any thoughts would be greatly appreciated.
pFumk76

First you'll need a hardware USB interface - http://www.altavista.com/web/results?itag=ody&q=usb+interface+module
And then check out the jUSB project - http://jusb.sourceforge.net/
There may be other options for communicating with USB from Java. I haven't actually done this yet. Snazzy idea, though. :)

Similar Messages

If I buy Microsoft office for MacBook pro will I be able to use diacritical marks for Welsh input? Welsh requires a circumflex sometimes on a,e,i,o,w and y, in addition to a diaeresis. An acute accents are not a problem as they occur in other languages.

If I buy Microsoft office for MacBook pro will I be able to use diacritical marks for Welsh input? Welsh requires a circumflex sometimes on a,e,i,o,w and y, in addition to a diaeresis. An acute accents are not a problem as they occur in other languages.

You can add in System Preferences, Language & Text, Input Sources, Welsh keyboard

HT4106 How do I use a midi keyboard on GarageBand with my iPad? When I try it says the device cannot be used as it requires too much power. However, I have given the midi it's own power source.

How do I use a midi keyboard as an input device on garageband? Its an oxygen 61 board. I'm using an iPad camera connection kit and a separate power source for the midi but each time it says it cannot use the midi as it requires too much power.

I have the same problem with my iPad and 61. Sometimes it says device not supported and sometimes it rants about power - any solutions anyone ?

MB Operation w/lid closed using FrontRow, BT keyboard & Mini-DVI to Video

Ok - after some tribulations here's how FrontRow works using a Bluetooth Keyboard and no mouse for your Living room TV enjoyment.
Ensure MagSafe attached to MB and plugged into wall electrical socket
1. Pair the Bluetooth keyboard to the MacBook
2. Close lid and wait for it to sleep
3. Connect Mini-DVI adapter to MB
4. Connect Mini-DVI to TV's video input and MB sound output to the TV's audio L/R sockets if you want TV sound, otherwise your sound will come from the MB speakers
5. Wait a few seconds and then press the Keyboard space bar (this is what I did but you may also be able to press any key)
6. After a few moments the MacBook will wakeup
7. Now use the remote and press Menu to launch FrontRow - it may take a few moments for things to happen on the TV screen - but hang in there as FrontRow will eventually show on the TV screen.
8. Now you can navigate FrontRow and play iTunes (and it shows playlist and tune info data - cool), DVD movie, Slide shows from iPhoto, etc.
Hey - it does work with a BT keyboard and there's no need to plug a mouse in either.
Remember that the MagSafe must stay connected otherwise you will lose your video feed to the TV.
You can also dispense with Bluetooth keyboard once you have things rolling. I did so, as I needed it for operating my PowerMac G5 which has only the Bluetooth keyboard feature for operating it - have no USB keyboard in the house.
This is all very very cool and my wife will love this setup.
Enjoy your FrontRow in the LR now.

A followup...
After playing some with FrontRow while MacBook connected to my TV I decide to revert back to normal operations and disconnected it from TV. Using the MacBook (Black with 1gig RAM) as normal I took a look at Top.app to see what resources had been used or were still in use. I found all the FrontRow Apps - iPhoto, iTunes, iMovie etc were still active and my RAM had been paged out furiously during the time it had been connected to the TV. Some 73,000 pageouts had occured and it had been zero before connecting to the TV.
This tells me that my 1gig was being over subscribed and that 2gig might serve me better and could explain why FrontRow stuttered a few time and appeared unresponsive.
I would say at this time that if you are going to be using FrontRow as I did then having as much RAM as you can afford in this little Black beauty will help things run more smoothly. I'm up for adding another 1gig to our MacBook.

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

If I install Windows on my Mac using Boot Camp, will I be able to use a Windows Keyboard instead of the Keyboard that came with my Mac?

yeah I use a windows keyboard both in OS X and in windows on my imac I pref the split ms type of keyboard over the tiny apple keyboard and I pref the razor mouse so those are my main input sources in both yosemite and windows8.1

Can I use my computer keyboard as a MIDI keyboard in Logic Express?

Hello,
Is it possible to use my computer keyboard as a one-octave piano keyboard (as possible in Garageband) ?
I'm not ready to shell out for a good keyboard just yet.

Yes. Not only can you use your computer keyboard by pressing the caps lock key, but you also have the option of using a "step input keyboard," a graphical display of a piano keyboard on which you can input and record notes by clicking with your mouse.

Additional Keyboard on serial port

Can I extend the KeyEvent class to handle more than those 114 keys?
I have an additional keyboard hooked up to the serial port.
I generate special custom KeyEvents with special KeyCodes after receiving certain bytews from the com port. I create new KeyStrokes using this KeyCode to be able to address this KeyStroke in a JMenuItem.
The problem is, that the standard KeyEvent spits out: "Unknown KeyCode:..." if I want to set the according KeyStroke as accelerator for a JMenuItem. This seems to stem from the method:
public static String getKeyText(int keyCode)
in the standard KeyEvent thatonly gets the text for KeyCodes between a lower and upper limit and my KeyCodes exceed this limit of course, since there is no space left.
Regards
Joerg Hoebelmann

And how about changing your scenario a little bit?
Since you have a special program to catch signals on COM port, you can enhance it with a logic to run the appropriate action from the menu directly.
If you want to stick to your solution you can try to take a look on the KeyEvent.java (source of KeyEvent.class) - maybe there's a possibility to break the limitation of 114 keys (but personally, I think it will not be possible)

Hi -- am an iMovie11 user and want to know if Motion 5 can be used for additional transitions, titles etc. inside iMovie?

Hi -- am an iMovie11 user and want to know if Motion 5 can be used for additional transitions, titles etc. inside iMovie?
<Email Edited by Host>

As far as functionality goes, I don't see anything wrong. when it comes to efficiency you need to keep some general pointers in mind. These issues which I'm bringing up will not affect your code currently since your array sizes are small but can start creating memory fragmentaion and slow down the software if your array sizes are much larger and the software runs for a long period of time.
1. Try not to use Build Array. Each time you use a built array labview creates a copy in the memory. Try to initilized your arrays and replace the subsets.
2. as much as you can try not index arrays or unbundle cluster multiple times. try to perform as many tasks as possbile in one shot. (this was evident in your second loop)
Besides that it's looking good.
I made a few modifications to your code and attached it. I wanted to give you a different take on it as it relates to being able to control the inputs and outputs programitically, if you had a look up table. I didn't make the same modifications to your second loop but I can guide you through what needs to be done if you would like to move in this direction. Again your original code is well done for someone who is new to labview so don't feel like you need to follow the new VI design. Just try to remove the build array and multiple indexing as a good programming habbit.
www.movimed.com - Custom Imaging Solutions
Attachments:
Channel Testing.vi ‏41 KB

Is it suggested to use an additional layer of internet security such as ESET Cyber Security Pro - Internet Security for Mac

I just want to make sure I am as safe as possible with all the internet hacking that has been in the Media. I have a Mac Mini that was purchased in Aug. 2013. Is it suggested to use an additional layer of internet security such as ESET® Cyber Security Pro - Internet Security for Mac ???

Mac users often ask whether they should install "anti-virus" software. The answer usually given on ASC is "no." The answer is right, but it may give the wrong impression that there is no threat from what are loosely called "viruses." There is a threat, and you need to educate yourself about it.
1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
The comment is long because the issue is complex. The key points are in sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
☞ It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
☞ It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
☞ It can easily be disabled or overridden by the user.
☞ A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
☞ An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, and a technological fix is not going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the scam artists. If you're smarter than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
☞ Software of any kind is distributed via BitTorrent, or Usenet, or on a website that also distributes pirated music or movies.
☞ Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, or your browser, or any other software.
☞ Rogue websites such as Softonic and CNET Download distribute free applications that have been packaged in a superfluous "installer."
☞ The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
☞ High-priced commercial software such as Photoshop is "cracked" or "free."
☞ An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission.
Conditional or unsolicited offers from strangers
☞ A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
☞ A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
☞ You win a prize in a contest you never entered.
☞ Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
☞ A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
☞ Anything online that you would expect to pay for is "free."
Unexpected events
☞ A file is downloaded automatically when you visit a web page, with no other action on your part. Delete any such file without opening it.
☞ You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
☞ An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
☞ Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
☞ To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
☞ Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere. In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
☞ By modifying the operating system, the software may also create weaknesses that could be exploited by malware attackers.
☞ Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an organizational policy requires it. Windows malware is so widespread that you should assume it's in everyemail attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user, you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither can you assume that you will always be safe from exploitation, no matter what you do. Navigating the Internet is like walking the streets of a big city. It's as safe or as dangerous as you choose to make it. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

Can we expect additional keyboard shortcuts in iOS 4.2?

I've started using iPad as a lightweight alternative to my MacBook Pro. I'm able to perform basic web/email tasks with the help of a bluetooth keyboard, but the entire experience would be greatly improved by the inclusion of of a few additional keyboard shortcuts / commands I've grown to love in OS X's Finder.
Sure, CMD+C, CMD+V, CMD+A are all there, but - tab, CMD+tab, CMD+Q, CMD+space - how I miss you so!
Anyone know of any thing like this on the horizon?
Message was edited by: CollinMel
Message was edited by: CollinMel - typos, preexisting shortcuts

Welcome to the discussions. The publicly available info about iOS 4.2 for iPad is here:
http://www.apple.com/ipad/software-update
http://www.apple.com/ipad/business/software-update
_Video: Apple - Special Event - September 1, 2010_
Feedback about iPad can be sent to Apple via this form:
http://www.apple.com/feedback/ipad.html

HT201178 How do I use the wireless keyboard to edit my iPhone contacts?

How do I use the wireless keyboard to edit my iPhone contacts?

Type in the field for first name, last name etc. When you're ready to go to the next field, hit enter/return.

How do I use my computer keyboard instead of a MIDI keyboard to enter notes? In Garage Band I simply go to View - musical typing but there is no such prompt in Logic Pro 7.

Ihave always used my Logic Pro 7 program with a MIDI keyboard for note entry. I do not presently have a MIDI keyboard and wish to use my computer keyboard for note entry. I know this is possible but cannot recall the command to set that up. Can anyone refresh my memory? I know that on Garageband on just need to go to view - musical typing but that is not the command in Logic Pro.

Hi,
Hit the Caps Lock key.
J.

I am using a USB keyboard and everytime I wake the iMac from sleep the keyboard will not respond unless I unplug and replug the keyboard. I am using a mid-2010 iMac with OSX 10.6. Any help would be appreciated.

I am currently using a USB keyboard (PC Model) and everytime I wake the computer from sleep the keyboard no longer responds unless I unplug and replug it. The USB mouse I am using works fine with no issues and I have already gone through the prompt to identify the keyboard in the settings. If anyone know of a setting I can use to permenantly enable the keyboard so I no longer have to unplug and replug it that would be appreciated.
Thank you.

Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
Have you run Disk Utility's Repair tool on the external drive as well?
I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was.

I've connected my macbook pro (os 10.6.8) to an external display, but it will not go into clam shell mode! When I close the lid the laptop goes to sleep, and I am unable to wake it using the external keyboard or mouse.

A rundown of what I've tried:
Adjusting energy settings to try to prevent sleep
Pluging the USB keyboard and wacom tablet directly into the laptop (as opposed to a usb hub)
My laptop's power cable is connected
My display (a Vizio TV) is recognized in the System Preferences panel
I'd been using this TV for about a year with my older Macbook Pro (OS 10.5.8), though using a different wireless keyboard and mouse
***Update: The issue seems to lie with the keyboard and wacom tablet. I am trying to use a wireless Case Logic keyboard (with dongal) and wired wacom tablet to wake the Macbook Pro in clamshell mode. To experiment, I tried using my Logitech wireless keyboard & mouse set (also dongal) that I had been using before and it wakes the computer without any problems! However, I really need to be able to use my wacom tablet. If I switch to the tablet after waking the computer using the Logitech keyboard & mouse it works, but once the computer sleeps it won't work anymore. I could keep switching back and forth I suppose, but it's sort of a pain. There has to be an easier way! Any ideas why the wired wacom tablet is unable to wake the computer in clamshell mode?
Thanks!

So your keyboard or mouse won't wake the Mac when you close the lid correct? Try resetting the SMC and pram
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

I have 2 iCloud accounts. Can I delete one account so I can make use of additional space I purchased for the secondary account? Also iPhoto seems to only connect to the primary account? How do I send files to the secondary account?

Both accounts are completely independent from each other. In order to use the space that you have purchased for your secondary account, you must change it to become your primary account. Yes, as you said, services like photo stream only work with the primary account. Unfortunately, there is no comfortable way to just transfer data from one account to another one, but you can do it via a third party application e.g. via Dropbox: e.g. for photos: photos stored with your current primary account > manual transfer to dropbox > after you made your secondary account to the primary account, transfer the photos back to your new primary account etc.

Using an additional Keyboard as inputs

Similar Messages

Maybe you are looking for