Using 'anchors' or 'handles' when making perspective adjustments

I'm not sure I have this right, but I sort of remember seeing somewhere about using tabs/handles/lock points so you can freeze a part of an image while you make perspective/lens adjustments to the rest of the image.
For example, it would be a way to 'freeze' the left quarter of an image while you made a perspective correction on the right-hand three fourths of the image. I'm not sure where this function/tool resides (if it even exists?): maybe as part of the lens correction filter, or transform feature or ...?
I'm using cs5. If this does exist, and if you know of any tutorials or videos, that would be grand. David

I think I was able to answer my own question: under Transform, the Warp tool overlays a grid on the image and let's you 'skew' the different sections, I think giving you a lot of control on how the adjustments affect the image.

Similar Messages

TS4079 Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new numb

Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new number.Help
I`ve tried restarting, rebooting, nothing works.
The interesting thing is that SIRI can call to previous mobile numbers (without the new digit) obviously not connecting , and, can call to any other numbers as an office or home number. So the problem is the new digit in the mobile number

Ecuador has added an extra digit to mobile phone numbers but apple wont accept 10 digit phone numbers so we cant use facetime or apple IM or verify our new phone numbers. ( and Siri won't work either!) I have contacted apple support online but can't request a call back as the apple system says our new phone numbers are invalid. I am going to phone them tomorrow and you should complain too at http://www.apple.com/support/contact/. . The more people that bring this to their attention the faster it will get fixed

I don't want to use the head phones when making a call. How do I turn up the ear volume on the iphone 4se

I can't hear people when they call me. How do I raise the volume with out using the head phones?

You can only raise and lower the earpiece volume while you are on a call. So, make a call, then use the bottons on the side to adjust the volume. If you're not in a call, those buttons will adjust the ringer/media volume.

When making lighting adjustments, I click OK and they revert.

Why, when I make lighting adjustments do they revert (go away) after I click OK?

What adjustments are you trying to make, and when do they fail?
Which version of PSE?
Any error messages?

Aperture Crashing when making book

Since updating to the latest release of Aperture, I've noticed it has gotten a bit freeze-prone. Working on a new book today, I've had to force quit 7 times in the last 3 hours. Thank god for Aperture saving as I go along.
Has anyone else noticed this?
for example (all of the below require a force quit):
-freezing for no reason when browsing photos in my library.
-freezing occasionally when making minor adjustments
-I'm currently making a book, my first since updating to 3.3 or whatever we're on now. I was incorporating a map into several pages and without fail, sometime during the process of choosing a location on each map creation, Aperture would "not respond" and freeze. I'd have to force quit.
Any ideas? I have no clue why this is happening. I'm running the top of the line 2013 21" imac, with really no other bloating or hi-needs programs other than Aperture. I'm solely running Aperture when doing any heavy editing. I really doubt it is the Mac.

Hopefully this will be fixed soon. You may want to send feedback to Apple to let the developers know of the problem. Here is the feedback form: Apple - Aperture - Feedback
And I hope your book will turn out great, in spite of the problems.
Unfortunately it will not help, to go offline, when entering the Places, because the connection to the server is needed. Going offline will prevent Aperture from crashing, as far as I can see, but the Place markers will not appear on the map, because there is not connection to the server.

When making Path, Option click NEAR handle should grab handle, NOT make new anchor

When making a path in Photoshop, if I have the basic Pen Tool, I often use Option on my Mac keyboard to temporarily get the Convert Point Tool, in order to adjust the handle protruding from an anchor point. I find it extremely frustrating that it will INSTEAD lay down another anchor point if I do not click PRECISELY on the end of the handle I intended to grab. Can't Photoshop just grab the handle as long as I am in close proximity AND am holding down Option? Since I AM holding Option, it should lock me out of adding additional anchor points.
I can't think of anything else I would want to do in this situation, in other words, I don't think it would be in conflict with any other feature.

It seems like I might want to second this one, as I remember complaining about something similar when working with paths recently...
(after trying...) No, it wasn't that, as the cursor change is a good enough sign of what my click will do... bummer... I need to lay down notes again!
About the near handles situation, what would be useful to have is a contextual menu (even a modifier-led contextual menu) to select the kind of anchor point we want, to convert a curve to a line, etc.

"Create new versions when making adjustments" - Lion, Aperture 3.1.3

I recently upgraded to Lion, and then shortly thereafter to Aperture 3.1.3.
While I don't seem to share everybody else's issues with Lion nor with Aperture, I do have one of my own.
In Preferences -> Advanced, I have a box titled "Create new versiont when making adjustment." It is checked.
My expectation, (and the way things have always worked under Snow Leopard) is that if I select a master image and begin to make adjustments to it from _any_ feature int he adjustments pallette, that I new version will be created, stacked next to the original, and that the changes I am making will be made to the new version. This is _not_ what is happening.
Instead, the changes are applied directly to the master image. This is annoying, and will probably be fixed in an update...    I thought the work around would be to manually create the version for the time being, until Apple sorts this out. That didn't work either.
If I manually create a version, and then proceed to make adjustments to the version, Aperture dows what I would have expected in the first place. It creates a new version and applies the changes to that.
For example, I right click on a master image and select "New Version form Master" A new version, titled "... - Version 2" is created. When I begin to modify Version 2, a new version is created titled "... - Version 3" and my changes are applied to this version... leaving me with the master and Version 2 which are now duplicates of each other.
Even more interesting is this:
Images that were imported into Aperture prior to the Lion upgrade, and the 3.1.3 patch behave as expected, in that a new version is created when adjustments are applied to a master image.
Images that were imported into Aperture _after_ the upgrade to Lion and the 3.1.3 patch act as describd above, in that no new version is created when adjustments are applied to a master image.
So... Here are the questions:
1. Is anybody else experiencing this?
2. Does anybody know how to restore the correct behavior?

Alright,   I have solved the problem.
Some time ago, I thought it might be neat to import pictures with the Auto Exposure adjustment in place. What I didn't realize was that if the master image is in the library with adjustments on it, it downs't create a new version when you add additional adjustments.
As soon as I disabled that, and imported some new imges the probelm went away.
Also... I went back to the six or seven project that I had imported while use Auto Exposure and removed that adjustment from those images...
All is resolved.

Preference to "Create New Versions when making adjustments"

Isnt the option in Preferences "create new version when making adjustments" seem irrelevant when Ap doesnt touch the original (master) anyway? How is this option intended to be used? Most of the imags for me would be slight tweeks so I wouldnt necessarily want every one of those showing as a 'full new version'.

yeh, that would seem logical wouldn't it - to create a new version for each session... but that's not what happens.
i mostly use the HUD and don't close between adjustments but i do sometimes use the side panel which i also don't hide/close between adjustments. i can't remember whether making adjustments via the side panel creates new versions for every adjustment, certainly this behaviour happens when i use the HUD and i'm fairly sure i would have tried the side panel to avoid this annoying behaviour but i can't say for sure and will have to test the side panel behaviour next week if i get time.
even with the preference for 'create new versions' turned off, there seem to be certain images that always create a new version when i make an adjustment - whether using the HUD or side panel. I haven't figured out an exact pattern to this but it seems to be something to do with those files that have been 'sent to external editor'. subsequent adjustments within aperture always create a new version - haven't a clue why...
just as an aside, sometimes when i make adjustments (particularly sharpening or noise reduction) i get single pixel wide horizontal lines of noise appearing across my images, which are there when i print or export too, not just screen artifacts due to a badly processed preview...hmmm...anyone else noticed this or has found a post about ways to avoid this?
all that said, aperture is a godsend for my workflow
MacBook 2.0 White Mac OS X (10.4.8)

"Create new versions when making adjustments" checkbox - do I check it??

I have been using Aperture for many months. I'm not sure why, but I looked at my prefs the other day and the checkbox above was unchecked. Two important questions:
1. Which way should this be set??
2. Is Aperture still keeping the original separate from any edits I am making? PLEASE tell me that my originals have been kept separately!!! : )
Thanks in advance,
Erik

1. It's a Preference. It should be set the way you prefer.
2. Aperture never adjusts the master.
When you look at an unadjusted image in Aperture, you are seeing +Version 1+. You can adjust Version 1, or you can create a new version and adjust that. Or you can set the preference, and when you make adjustments, a new version will be created automatically. This can cause unwanted versions to accumulate. Or maybe they are not unwanted.
The Master is never affected, just the versions.

Create new versions when making adjustments?

Hi,
What does anyone suggest this setting should be set to? It's on the Advanced Tab in Preferences.
I think it was un checked when I installed the Trial Version.
The help file stated the following:-
+Create new versions when making adjustments” checkbox: Select this checkbox to have Aperture automatically create a new version when you adjust a selected image. The adjustment is applied to the original version and the new one is left untouched.+
So when I edit an image the the software makes a copy and the original is altered? What happens if it's left un checked?
Any help on the whole editing thing would be gratefully received.

This is just a way to automatically create a new version when you make an adjustment. The new version is stacked with an unaltered version, allowing you to quickly see them side by side. What you have to remember is that the *original file is never altered*. This is all virtual. What is called original in this case is in fact an original version, not the actual file. The actual file is called the Master. Very important to understand the distinction.
I personally leave this off. I never use RAW files without adjustments so there's no point in keeping an unaltered version around, plus it tends to quickly multiply versions and just creates clutter. If I want to see the original file I just hit M (this is the default command key for Show Master). Hit M again and I'm back to my version. If I've created a version and want to do a new different looking one starting from scratch, I can select New Version From Master: presto a new "original"!
If I've worked on a picture and want to create a BW version, chances are I want to keep the work I've already done as a starting point. In that case I select Duplicate Version and do my BW on the new version. Again, I'm never actually duplicating files and I'm never actually altering pixels, original or otherwise. This is all a set of xml instructions that Aperture applies when it displays the files.
Helping?
Message was edited by: Jade Leary

HI I have an Iphone 3GS and the microphone jack works when I play music but not when making phone calls. please help as I use it for conference calls

Hi I use my phone for conference calls and use the microphone jack to connect to speakers. It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.

Happy to have been of help. Hope all goes smoothly.
BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
https://discussions.apple.com/static/apple/tutorial/mark.html
and
https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards.

HT1689 I have a credit in my itunes account but when making a purcahse it is asking for my credit card info. I don't want it charged to my credit card, I want to use my account credit. How can I do this?

I have a credit in my itunes account but when making a purcahse it is asking for my credit card info. I don't want it charged to my credit card, I want to use my account credit. How can I do this?

Hello, Lynne.
Thank you for visiting Apple Support Communities.
Here is a helpful article that explains how iTunes purchases are billed.
iTunes Store: How iTunes Store purchases are billed
http://support.apple.com/kb/HT5582
When using iTunes to purchase content for the first time on a new device, it may require you to verify your payment information as a way to authenticate your device. If this not a new device attempting to access iTunes store and prompting you provide payment information, there could be an outstanding balance. This article will show you how to verify you purchase history and invoices.
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Also, you can change the payment method as none as long as there isn't an outstanding balance on the account.
iTunes Store: Changing account information
http://support.apple.com/kb/ht1918
Hope this helps,
Jason H.

The numbering format keeps changing when making PDF's from Word 2007 ? Using Acrobat 9 Pro Extended

The numbering in (Contents) format keeps changing when making PDF's from Word 2007 ? Using Acrobat 9 Pro Extended.

The issue is that I have made up a contract in Word.
The second page has a list of all contents of the contract.
gghhjhhbhbhhbhbjbhj....1
bv v vghvjvjnnnnnnnnn....2
When we convert to PDF some of the numbers change. Example 20 becomes 201.
Your help is appreciated.
Cheers Ocean designs.

Acrobat X Pro hangs when making PDF. Using on Windows 7 64. Just started hanging. Uninstalled and reinstalled. Installed update. Once it hangs, must go into crtl, alt, delete to force close.

Acrobat X Pro hangs when making PDF. Using on Windows 7 64. Just started hanging. Uninstalled and reinstalled. Installed update. Once it hangs, must go into crtl, alt, delete to force close.

As a debugging step, try printing to the Adobe PDF printer. If that fails, repeat with print-to-file selected. Assuming the print succeeds, open the file in Distiller to complete the creation of the PDF. If you get the PDF, then check to see if AcroTray is properly working as a background task.

What stub code does APEX uses when making a web service call ?

What stub code does APEX uses when making a web service call (manual web service reference)
I am using APEX (which was part of the 11g installation).

Hi Steve,
Some options for the same issue:
web service time out
How to check for Web Srvice Timeout in ABAP Proxy call
Regards
Vijaya

Using 'anchors' or 'handles' when making perspective adjustments

Similar Messages

Maybe you are looking for