Using and synchronizing applications from Windows Server 2012 on local desktop

I have Visual Studio 2010 on my remote server.  How do I use Visual Studio  software from the server on my local laptop and sync it with the server?

Of course remote desktop assumes that the system is also properly licensed for Remote Desktop Connections.
A little clarification on the OP's request might also be in order.
"How do I use Visual Studio  software from the server on my local laptop and sync it with the server?"
 If you want to run VS on the server, using something like remote desktop services, it runs there and the data stays there.  Obviously you can redirect where VS will store data so that it stores data on your laptop, but then there is nothing to
automatically synchronize it.  Maybe a more complete explanation of your issue would help.
. : | : . : | : . tim

Similar Messages

  • Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10?

    Is it possible to uninstall IE 11 from Windows Server 2012 R2 and replace it with the latest version of IE 10? We have a remote desktop farm setup with 2012 R2 servers and we are publishing some web links that only work with IE10. As a result, we need to
    downgrade the remote desktop servers to IE10. I have a feeling that this isn't possible, but if I could get a definitive answer, I would greatly appreciate it, thank you!

    Hi,
    Agreed with DonPick.
    Internet Explorer 11 is preinstalled with Windows 8.1 and Windows Server 2012 R2.
    More information regarding Internet Explorer 11, please check:
    Internet Explorer 11 - FAQ for IT Pros
    http://msdn.microsoft.com/en-us/library/dn268945.aspx
    Best regards
    Michael Shao
    TechNet Community Support

  • Upgrade from Windows Server 2012 Active Directory to Windows Server 2012 R2 Active Directory

    We are currently running Windows Server 2012 Active Directory and would like to upgrade to Windows Server 2012 R2 AD. Is it OK to just do an in-place upgrade, or is it advisable to build new domain controllers on R2? Are there any guides or articles anyone
    can recommend?

    Hi Ginandtonic,
    To upgrade DC(Domain Controller) from windows server 2012 to windows server 2012 r2, please refer to these articles:
    Upgrade from windows Server 2012 to 2012 R2                                 
    Upgrade Active Directory from 2012 to 2012 R2
    I hope this helps.
    Best Regards,
    Anna

  • Does Windows Server 2012 support Remote Desktop Client 6.1?

    Hi,
    Does Windows Server 2012 support Remote Desktop Client 6.1? IU can't find a link anywhere on the Microsoft site to confirm this!
    Thanks,
    Jim

    this should help you
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/b664ddaf-6c11-49e2-8a69-0df3b8ef13a1/server-2012r2-rds-farm-with-xp-and-windows-vista-clients?forum=winserverTS

  • Printing Problem with Epson LX-300+ii and LX-310 in Windows Server 2012 R2 64-bit

    I recently installed Windows Server 2012 R2 64-Bit.
    We have Printer Epson LX-300+ii and LX-310 (dot-matrix) that we share among users. Each user access the Server using Remote Desktop. From previous experience with Windows Server 2008, I knew that these printers will be problematic, especially regarding
    the Easy Print driver.
    And I was right, using the Easy Print driver, I got the following result:
    And so, I did manual mapping & disable the "Use Remote Desktop Easy Print printer driver first". Haha, what a surprise, I got the following result:
    And so I uninstalled the printer driver, and install it again, thinking that I might chose a wrong driver, but.... same result. I know for sure that I chose the correct driver.
    Next, I tried connecting the printer DIRECTLY to the server. Log-in to the Server directly,
    not using Remote Desktop. And tried printing again, haha... really... what a surprise... I got the same problem here !!!
    So now I know the problem is not the Easy Print driver, not mapping or registry problem either. It's the print driver. This is SUPER FRUSTRATING, I tried the same driver from the same CD in Windows 8.1 64-Bit with no problem. I tried it too in Windows 7
    32-Bit with no-problem either. But somehow, this driver is problematic in Windows Server 2012 R2.
    Any help? Anybody else bump into this same problem ? I'm close to giving up, been spending too much time figuring out this damn thing.
    Andy

    Hi Bulent Sahin,
    Thank you for your reply, I tried IBM Graphics driver, but the result is equally as bad. But your answer inspire me to try different drivers. And so, the closest & best driver that I could use now is EPSON ESC/P 9pin V4 Class Driver
    It's not as good as I would expect, but at least now, it's acceptable & readable. I can't believe that I'm the only one who have this problem
    Thank you Mr. Sahin

  • Unable to add network printers from Windows Server 2012 R2 to client running Windows 7 Pro x64

    New Windows Server 2012 R2 Standard in the environment.  Added print services to it and added five HP printers to it and shared them.  Also deployed the printers via group policy.
    Clients are running Windows 7 Pro x64.  The group policy fails to install the printers (error 0x00000002).  We get the same error when trying to manually add the printer from the client side.
    From Event Viewer: Group Policy was unable to add per computer connection <<printer share>>. Error code 0x2. This can occur if the name of the printer connection is incorrect, or if the print spooler cannot contact the print server.
    Any ideas on troubleshooting this?
    Thanks.
    -John

    John,
    You might try playing with the HP universal driver, that might help you.  Try installing a new shared printer on the server using the universal print driver, then try and connect to it to see if it is any better.
    Check these GPO settings to ensure local machines can install the drivers.
    1. Configure the following two Group Policy settings:
    Computer Configuration\Policies\Administrative Templates\System\Driver Installation\Allow non-administrators to install drivers for these devices setup classesEnabled
    2. Device class GUID of printers: {4d36e979-e325-11ce-bfc1-08002be10318}
    Computer Configuration/Policies/Administrative Templates/Printers/Point and Print RestrictionsEnabled
    Security Prompts: When Installing Drivers for a new connection = Do not show warning or elevation prompt
    This article might help you out also:
    http://www.eversity.nl/blog/2012/09/windows-cannot-connect-to-the-printer-operation-failed-with-error-0x00000002/
    Cheers,
    Curt Winter
    Certified Microsoft Professional
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied. If you found my post helpful, please mark it as the answer.

  • Unable to Connect to SQL 2000 Instance from Windows Server 2012 environment

    We have a windows server (TEST) 2012 environment , where our test SQL Server 2012 instance is hosted.
    We have a different (DEV) Server (windows 2000)  where a SQL Server 2000 instance is present.
    When I RDP to our Windows Server 2012 box, I cannot connect to the SQL 2000 server instance from SQL Management Studio. (whereas I can connect to
    the same server from my local machine which has windows 7 and SQL 2012 installed). 
    This is the error i see - 
    "A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name
    is no longer available.) (.Net SqlClient Data Provider)"
    When run from SQL Agent Service from TEST (A Job which tries to connect to that SQL 2000 instance to read some data using SSIS) , we get the following
    error - 
    An OLE DB record is available.  Source: "Microsoft OLE DB Provider for SQL Server"  Hresult: 0x80004005  Description: "[DBNETLIB][ConnectionRead
    (recv()).]General network error. Check your network documentation.".
    The same SSIS package runs successfully from my local machine.
    Please, could someone advice how to resolve this situation?

    Thanks Olaf.
    Its just that we have legacy systems here in our company, who, for some reason haven't upgraded their older infrastructure, whereas they have set up new Windows 2012/SQL 2012 environments for the newer sql instances where they want to transition to !
    Not sure what the solution is honestly. It is affecting our timelines now. The infrastructure team needs to take a decision now, as to what to do.
    I do have to add, we were able to connect to these "older" servers from our Windows 7 client machines which have SQL 2012 - both from SQL management studio & SSIS (using OLE-DB Provider for SQL Server).

  • Anyone using Adobe Premiere Pro on Windows Server 2012?

    No, and not through RDP/Terminal Services. I mean directly on a big honking server with Windows Server 2012 R2 OS. I have a box here and I'm trying to figure out if I could install Windows Server 2012 and use Premiere Pro at the same time or am I compelled to use Windows 8.1
    Your help is greatly appreciated!    

    Hi Skadaba,
    I have also been trying to install PP CC on Windows Server 2012 R2. I chose this because I am attempting to connect to a SAN with SMB over RDMA over Infiniband, and only 2012 supports the protocols I require to do this. Regardless, the problems I am having with Server 2012 R2 is that Server 2012 no longer supports direct installation of Windows Media Player, which has core files required for use by Premiere. Instead, Microsoft will try to have you install IIS Media Services which doesn't help in this situation.
    I did find a solution to this that appears to be working. If you go to Server Manager and install the Desktop Experience Feature this should install the WMP core required in Premiere (Manage -> Add roles and features  -> Add Feature -> User Interfacce and Infrastructure -> Desktop Experience).
    So as John Smith said, it isn't officially supported by Adobe, but it does seem to work once you go through those first first annoying steps.

  • Unable to install WSUS Updates KB720211 x64 and KB2734608-x64 on windows server 2012 r2 standard

    Hi,
    Am testing SCCM 2012 R2 in virtual environment. To handle Windows 8 clients, need to install KB2734608 update, which is failing.
    Not able to install WSUS Updates KB720211 x64 too. The server is on Windows Server Standard 2012 R2 x64.
    Any help will be appreciated.

    Hi,
    Agree with Michael. KB2734608 is applied to the WSUS 3.0 SP2. If we install the WSUS on Windows Server 2012 or later, the version of the WSUS becomes to v6.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • I need to downgrade Product key from Windows server 2012 STD edition to Windows server 2008 ENT edition

    I have a product key for Windows server 2012 Standard ROK edition and need to downgrade it to windows server 2008 Enterprise edition.

    Hi,
    Based on my research,
    Windows Server 2012
    Standard edition
    can be downgrade to any prior version of Standard and Enterprise or Essentials editions.
    For more detailed information, please refer to the links below:
    Understanding
    downgrade rights
    WS2012_Licensing-Pricing_FAQ
    Best regards,
    Susie

  • Migrating an Oracle Forms 4.5 application from Windows Server 2000 to 2003

    We are upgrading a number of servers from Windows Server 2000 to Windows Server 2003 (Standard Edition, R2). Can we re-install Forms 4.5 on 2003 and what is involved. If not, what can we do.
    Kind regards,
    Malcolm

    Forms 4.5 has been desupported way before Windows 2003 was ever available. So, you can be sure that Forms 4.5 is not supported on Windows 2003. You could give it a try, but you could very well run into problems.

  • Downgrade HPC cluster from Windows Server 2012 to 2008 R2

    Hi,
    We have a customer that have bought a system with HPC Windows Server 2012 and need to downgrade to HPC Windows Server 2008 R2.
    The customer thas gotten a Windows Server 2012 OEM DVD, so my question is how can we install the system with Windows Server 2008 R2, what are the practical steps like, where to find software, licenses keys etc...
    Thanks for reply.
    /Regards Andreas

    Hi,
    For the HPC question, please post in HPC support forum:
    Windows HPC Server
    http://social.microsoft.com/Forums/en-US/home?forum=windowshpcitpros
    Thanks for you cooperation and support.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Forest and domain functional level Windows Server 2012 R2 - what's new?

    Hi, I still can't find documentation about the new domain and forest functional levels in WS 2012 R2.
    a) "What's New in Active Directory in Windows Server 2012 R2"
    http://technet.microsoft.com/en-us/library/dn268294.aspx
    No word about it.
    b) "Understanding Domain and Forest Functional Levels"
    http://technet.microsoft.com/en-us/library/cc771294.aspx
    Still WS 2012.
    Thorsten

    For what's New in Active Directory in windows server 2012 R2,
    Read the following Blog
    http://policelli.com/blog/archive/2013/06/27/whats-new-in-active-directory-in-windows-server-2012-r2-preview/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer".

  • Windows Server 2012 Standard - Remote Desktop Management service won't start

    Dear colleges, I'm seeking your help in resolving a weird issue with Remote Desktop.
    The Remote Desktop Management service gives the following error message any  time it is attempted to start:
    "The Remote Management Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
    The Event Viewer error message is as follows:
    "The Remote Desktop Management service failed to start. Error code: 0x88250001"
    Whenever I connect to the server with RD I get error message that the Remote Desktop Licensing Server isn't configured and that the RD trill will expire in N-days. The server is up to date updates wise and has been licensed for 5 RD CALs. The server hosts DNS
    server and has AD DS role installed, is virtualized to have one Hyper-V server.
    I read some blogs about having both DNS and AD DS on one box is a bad sea and a root cause of the issue. Well, that very well may be, but for me that's an option as I'm not going to get a box to just host DNS. There should a solution to this as I shouldn't
    only one suffering from this issue.
    I also read about KB2871777 - Servicing stack update supposedly addressign this issue. Well, it's on my system and the issue is there too. :)
    Will I loose ability to RD when the trial expires or it's just another misleading MS message that can be ignored?
    How do I mend Remote Desktop Management service to start?
    Appreciate your help!
     

    Hi,
    Thank you for posting in Windows Server forum.
    Can administrators perfectly connect to RDS environment?
     In meantime please check that you have properly configured and activated RD License role service and install RDS CAL on it. It might also possible that you have configured RD License server but it server can’t find it and giving you error due to certificate
    also. Please check that you have properly configured certificate on your RDS Server. Try to install and update below hotfix for License related issue.
    No RDS license when you connect to an RDS farm in Windows Server 2012
    http://support.microsoft.com/kb/2916846
    If you have configured both RDS and AD DS on single server then also you may find some error reading this. If so please try to setup both roles on different server and check the result. In addition to this, please check below articles.
    What's New in Remote Desktop Services in Windows Server 2012
    http://technet.microsoft.com/en-in/library/hh831527.aspx
    Install Remote Desktop Services Failed on Windows 2012 Server
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbf47aa2-8ae5-4f22-9827-afee5a11417a/install-remote-desktop-services-failed-on-windows-2012-server?forum=winserverTS
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Windows Server 2012 Pooled Virtual Desktop collection GetVMstate issue

    I am trying to create a Pooled Desktop collection with my Powered off VM and it errors out The
    virtual desktop must be in a stopped state:  Could not identify the state of the virtual desktop.  Ensure that the RD virtualisation host server is available on the network and the virtual desktop is shut down
    In the debug logs it shows.
    Component RdmsModel: GetVMstate for Vm Win7_BaseVM failed with error 16386
    Component RDExceptionHandler: Could not identify the state of the virtual desktop. Ensure that the RD Virtualization Host server sunflower-1.HYPERQA.NUTANIX.COM is available on the network and that the virtual
    desktop Win7VMSF is shut down.
    Please help on resolving this GetVMState issue.

    Hi Krishna,
    Thank you for posting in Windows Server Forum.
    When you are configuring RDVH initially, please see that you have meet prerequisites. Remember that you need these pre-requirements:
    • Database based on SQL Server 2008 R2
    • Static IP Address for all Broker
    • Round Robin DNS
    • All RD Broker must be members of AD Windows Group (es. RDCB Server Group)
    • The group must be insert into SQL Server as sysadmin ONLY for the DB creation. After that DB will be created give the db_owner permission only for their DB
    More information.
    Windows Server 2012 R2: Unable Add New VDI Template
    In addition, we need all RD Broker must have the same SQL Native Client as main SQL Server (es. SQL Server 2012 SP1). The Connection Broker server's computer account MUST be a member of the local administrators group on the Virtual Host (RDS Host) machine and
    then reboot the server. Finally check the result.
    Windows Server 2012 Virtual Desktop Template Issue
    Hope it helps!
    Thanks.
    Dharmesh Solanki

Maybe you are looking for

  • Entering values in Web Services ID and Description, for External Catalog

    Hi, I am trying to connect to an external Vendor Catalog from ERP. Pl note that we just have ERP ECC 6.0 and no SRM. I went to SPRO and followed menu path 'Materials Management >> Purchasing >> Web Services: ID and Description'. I am not sure what to

  • Editing .gif animations

    I was given a number of .gif animations to edit and re-deploy to the Web. Each anim has about 40 frames. I need to delete 2 small spots on the image in each frame. I was hoping that I could do a mass delete that would "take" on all the frames. I coul

  • Problem in starting Weblogic 5.1 with Solaris 2.6

    Hi all: I am getting the following errors when I run Weblogic 5.1 on Solaris 2.6. I am going to the prompt and executing startWebLogic.sh command. Do we have to write a KSH for this. I am getting the following errors.My first question is that do we n

  • Ports for Macbook Pro to monitor screen

    I just bought a Macbook Pro 2 Ghz i7, 15" laptop and it doesn't seem to have connections(ports) to a separate monitor screen, what can I do? Thanks! Frank

  • Polling Strategy to get back inserted/updated rows from BPEL

    Hi, Can anybody have code to get back the newly inserted/updated rows from database table, using DbAdapter Polling Strategy from BPEL Process.