Using Backup at Primrary to Create Standby

I have a backup(image copy) of the primrary database that is a day behind - Take a full image copy on Day 1 and merge with the daily incremental backup (using the block change tracking). In the primary database I have a few partitioned tables - partitioned by date. Every day the partitions which are more than a week old are marked as READ ONLY.
I would like to clone the standby database using this backup - copy only the R/W tablespaces (i.e. not copy the READ only partitions) , restore the standby and start the replication. The copy and restore of the READ only partitions is deferred till the replication is started - to minimize the loss.
Are there any potential problems with this approach. If the steps are available I will really appreciate that.
Rittick

user11188564 wrote:
I have a backup(image copy) of the primrary database that is a day behind - Take a full image copy on Day 1 and merge with the daily incremental backup (using the block change tracking). In the primary database I have a few partitioned tables - partitioned by date. Every day the partitions which are more than a week old are marked as READ ONLY.
I would like to clone the standby database using this backup - copy only the R/W tablespaces (i.e. not copy the READ only partitions) , restore the standby and start the replication. The copy and restore of the READ only partitions is deferred till the replication is started - to minimize the loss.
Are there any potential problems with this approach. If the steps are available I will really appreciate that.
RittickHere i got some information for you, Check page no 12 of http://www.oracle.com/au/products/database/s281211-fnf-132193.pdf
>
Backup RO tablespaces only once:
backup as compressed backupset incr
emental level 0 diskratio=0 tag
EDOC_backup_Tz_17_JUL_2006
filesperset 5 tablespace
PRELIM_XML_2006_Q2 ;
Use RMAN Level 0 and Level 1 Compressed skip RO to backup database:
backup as compressed backupset incremental
level 0 skip readonly diskratio=0 tag
EDOCPRD1_backup_0z_full_101406 f
ilesperset 5 (database) ;
Restore the database first
RMAN restore database/switch datafile all;
Restore RO tablespaces ahead of time and RMAN catalog/switch afterward
In a RAC environment, shutdown other ASM instances during restore
Do not restore mutilple RO tablespaces concurrently
Do allocate multiple RMAN channels

Similar Messages

Add temporary datafiles after creating standby database

I used data guard manager to create standby database and it went fine. Before finish, system pop up a window and says,
"The data guard configuration has been created in a disabled state. It must be enabled using the Enable option in the configuration menu. Pior to ebaling the configuration, please verify the following:
The Primary database contains temporary datafiles. The files will not be duplicated in the new standby database. You must manually recreate the temporary files on the standby node by adding them to their respective tablespaces in the standby database after creation process in complete."
The problem is, in the standby database, how do I add tempfile without open the standby database? the documentation is very unclear...

Thanks for the reply and the useful link. I had followed the instructions when creating the standby database, although under database options there is a difference between the OEM version we are using and the version shown, whereby the 'RMAN backup location' option has been replaced with 'working directory location'.
Just found the following and am guessing this is the issue.
NFS mounts established within a zone are local to that zone. The mounts cannot be accessed from other zones, including the global zone.
I suspect I will need to copy the backup pieces onto the local server in order to create the standby database using OEM. Not something I was expecting to have to do as copying will take a long time due to the size of the backup, but unless anyone else can shed any light on the reason for the initial error
RMAN Backup Location - The specified RMAN backup is invalid. Could not identify controlfile from the backup
then I guess this is the only way forward.
Regards,
JP

Create standby database using restore backup

Hi,
I am creating a standby database 11g using manual process of restoring a backup , but to no avail. I can not even restore the backup successfully.
This is the steps I followed (courtesy of ORACLE-BASE) ORACLE-BASE - Data Guard Physical Standby Setup in Oracle Database 11g Release 2
I am confused about these steps:
Copy the files from the primary to the standby server.
Copy Standby controlfile to all locations.
$ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl
$ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
My question is, for the 2nd copy, do I need to shutdown the primary db? since control01.ctl is being updated all the time?
Can I not used the standby ctl (db11g_stbg.ctl) and copy it to /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?
Your assistance is highly appreciated.

f55237a7-2c38-4db3-a7a3-1d77256f0730 wrote:
Hi,
I am creating a standby database 11g using manual process of restoring a backup , but to no avail. I can not even restore the backup successfully.
This is the steps I followed (courtesy of ORACLE-BASE) ORACLE-BASE - Data Guard Physical Standby Setup in Oracle Database 11g Release 2
I am confused about these steps:
Copy the files from the primary to the standby server.
Copy Standby controlfile to all locations.
$ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl
$ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
My question is, for the 2nd copy, do I need to shutdown the primary db? since control01.ctl is being updated all the time?
Can I not used the standby ctl (db11g_stbg.ctl) and copy it to /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?
Your assistance is highly appreciated.
Hi,
You are created standby control file on primary and copied to standby side:
$ scp oracle@ol5-112-dga1:/tmp/db11g_stby.ctl /u01/app/oracle/oradata/DB11G/control01.ctl
And now, in paramter files, you have CONTROL_FILES parameter as below :
control_files='/u01/app/oracle/oradata/DB11G/control01.ctl', '/u01/app/oracle/fast_recovery_area/DB11G/control02.ctl'
it means you must copy controlfile IN standby side to second control file. Control files must be same.
$ cp /u01/app/oracle/oradata/DB11G/control01.ctl /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl
My question is, for the 2nd copy, do I need to shutdown the primary db? since control01.ctl is being updated all the time?
You not need shutdown priamry database, becuase you copied standby control file to standby side, and all operations goin in standby side.
Can I not used the standby ctl (db11g_stbg.ctl) and copy it to /u01/app/oracle/fast_recovery_area/DB11G/control02.ctl instead?
Yes, you can use (db11g_stbg.ctl) standby controlfile
Regard
Mahir M. Quluzade

Create standby using incremental backup

can I create standby database using a backup of primary which was created using below command? ( incremental backup level 0)
BACKUP INCREMENTAL LEVEL 0 AS COMPRESSED BACKUPSET DATABASE TAG 'mybackup_date' PLUS ARCHIVELOG DELETE INPUT;
v11.2.0.2
physical standby

Hello;
Probably not. The backup command is missing this key piece :
backup current controlfile for standby format '/u01/backups/PRIMARY/sb_t%t_s%s_p%p';Since you are using 11R2 you can use "Create a Standby database from an active database using RMAN"
Example :
http://www.visi.com/~mseberg/standby_creation_from_active_database_using_rman.html
Or
RMAN duplicate for Data Guard standby
http://www.visi.com/~mseberg/duprman2.html
Best Regards
mseberg

Create a new Standby db from a backup taken in an existing standby.

Existing 2 sites: PROD (primary)), Local-standby.
Planning to add a 3rd site: Remote-standby
How do you use a full backup taken in the Local-standby (not the primary) to create the Remote-standby?
Any pointers will be appreciated...essentially creating a standby from a standby.
It may be of interest to note that running the "BACKUP CURRENT CONTROLFILE FOR STANDBY" in the Local-standby will error out with:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on dupdb_ch1 channel at 11/30/2012 19:49:44
ORA-01671: control file is a backup, cannot make a standby control file
Thanks

For folks who may stumble on this thread.
2 hosts - 1 - primary, 2 - local stby
3rd host was being added in the mix.
So, we want to build standby number 3 - DR stby
Aim was to create the DR stby from a backup taken from local stby, W/O affecting primary.
Create backup pieces from local stby (to be made available in DR stby) using "backup device type disk format '/u01/backups' database plus archivelog;"
As mseberg pointed out, take a "backup current controlfile for standby" from primary & make it available in DR stby
startup nomount the DR stby
restore controlfile in DR from step2
catalog the backup taken in step 1
Run the duplicate command from DR as usual, connecting to the primary as target and the DR as auxiliary
Enjoy

Create Standby Database using RMAN changing backuppiece location ID753902.1

[https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=HOWTO&id=753902.1] I am trying to create standby using above document however when I do recover database I get below error
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/06/2011 13:50:40
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 1899 and starting SCN of 25926696
logsequence 1899 is very very old sequence and doesnt exist on primary.this sequence is not needed because backu pwas taken after this sequence so I dont undrestand why rman is asking for a sequence that doesnt exists?
my db is 11.2 and in archivelog mode , i have all the archivelogs from the date backup was taken until now...
thanks
Edited by: user9198889 on Jul 6, 2011 8:29 AM

CKPT wrote:
user9198889 wrote:
[https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=HOWTO&id=753902.1] I am trying to create standby using above document however when I do recover database I get below error
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/06/2011 13:50:40
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 1899 and starting SCN of 25926696
logsequence 1899 is very very old sequence and doesnt exist on primary.this sequence is not needed because backu pwas taken after this sequence so I dont undrestand why rman is asking for a sequence that doesnt exists?
my db is 11.2 and in archivelog mode , i have all the archivelogs from the date backup was taken until now...
thanks
Edited by: user9198889 on Jul 6, 2011 8:29 AMHave you restored from the recent backup?
validate the backup compeltion_time and then retry the operation, Are you restoring from tapes?yes its recent backup(last and only backup infact ) , the backup took couple of days to run..
the backup was executing using this command BACKUP INCREMENTAL LEVEL 1 AS COMPRESSED BACKUPSET DATABASE TAG 'LEV1_BCKP_2011-06-27_11_54' PLUS ARCHIVELOG DELETE INPUT
there was no full backup so oracle must have taken full one and not incremental correct?
first logseq that was back's up is : 35818
primary uses local disk for its db and backup
standby that i am trying to create is on asm. i have copied backup to FRA and restored to +data its recovery that is failing now

How to create standby controlfile from restored backup

Hi Techies,
I am re-building one of my DR server, Source and target DB is oracle 10g.
I have taken the source backup which is going to be restored on target, But I forgot to take a standby controlfile from source DB at the time (Pre/Post) backup.
Now the issue is I can create a standby controlfile on primary and copy the same to target, But so many datafiles are added after the backup which I have taken to restore and medias are already shipped.
I can send the other set of backup to DR site, but it takes a week time and I don't want to do that If I can regenerate it.
So any clue to create standby controlfile on target with restored datafiles?
Regards,
Nick Loy

Hmm... sounds like you perform this in a rather manual fashion...
Do you use RMAN for taking the backups?
Or maybe the BR*TOOLS?
With these tools you are usually safe from such mistakes - I can only recommend to use them!
However, since you don't have a control file at all on the target side, the only thing left to do would be to
ALTER DATABASE BACKUP CONTROLFILE TO TRACE NORESETLOGS;
on the primary side and manually remove the files that have been added since you took the backup from the control file script,
Afterwards you use the script on the standby side to create the control files.
regards,
Lars

How to create standby database by using duplicate

Dear all,
How to create standby database by using duplicate,is there some doc to read?

Hi;
You can use
Step-By-Step Guide To Create Physical Standby On Normal File System For ASM Primary using RMAN [ID 838828.1]
Creating Physical Standby using RMAN Duplicate Without Shutting down The Primary [ID 789370.1]
Also use goole, there are many blog-site-dogs mention that topic. From googling:
Creating a Standby Database with Recovery Manager
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmdupdb.htm
http://www.pythian.com/news/248/recipes-for-creating-a-managed-standby-with-rman/
http://docs.oracle.com/cd/B19306_01/server.102/b14239/rcmbackp.htm
Regard
Helios

Creating standby database using RMAN

When I'm creating standby database with RMAN command
'duplicate for standby' backups for creating standby database
have to be accessible from host where standby database
is created. I can copy the backups to standby host, or use
NFS to share the disk with backups to standby host.
But when I have backups in ASM diskgroup how can
I achieve it would be accessible from standby host?
Thanks a lot for advice,
M.

OK, thanks,
I will create standby using Grid, but I have the following problem:
database instance is running on the host where I want
to create standby database. The running instance is for
testing purposes and has the same db_name, db_unique_name, db_domain
parameters as in primary database.
I will change db_unique_name to be distinct from primary database one,
should I also change instance SID not to be the same in
testing database and standby on the same host, or when creating standby
database I can specify distinct one for standby database?

I am trying to restore files created using Backup in Tiger. How do I do this on a Snow Leopard machine which is connected to the Tiger external drive?

I have an external disk that was used on Tiger iMac. I used Backup to save files. Now that I have this external drive connected to a new IMac running SnowLeopard, how do I restore files?

Backup 3.2 is still usable if you have a MM account and can download the upgrade. Otherwise you'll need to restore them via Tiger.
If the backup is not archived, then the individual files may be accessible directly.

Gating error while creating standby database in oracle 11g

Dear Gurus
I am getting following error while creating standby database. My database version is oracle 11g 11.2.0.1 in Redhat 5.2
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 10-MAY-12
using channel ORA_AUX_DISK_1
contents of Memory Script:
backup as copy reuse
targetfile '/oracle/product/11.2.0/dbhome_1/dbs/orapworcl' auxiliary format
'/oracle/product/11.2.0/dbhome_1/dbs/orapwstdb' ;
executing Memory Script
Starting backup at 10-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/10/2012 15:44:18
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/10/2012 15:44:18
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
ORA-17629: Cannot connect to the remote database server
RMAN>
Regards
Rabi

Hello;
Generally for the connection to work you need to add something like this to the listener.ora file :
(SID_DESC =
    (global_dbname = STANDBY.hostname)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
    (sid_name = STANDBY)
)You should stop and start the listener on the Standby after adding this. Also your tnsnames.ora must be correct on both the primary and the Standby.
Also you need an INIT for the Standby side :
STANDBY.__db_cache_size=343932928
STANDBY.__java_pool_size=4194304
STANDBY.__large_pool_size=4194304
STANDBY.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
STANDBY.__pga_aggregate_target=281018368
STANDBY.__sga_target=834666496
STANDBY.__shared_io_pool_size=0
STANDBY.__shared_pool_size=469762048
STANDBY.__streams_pool_size=0
audit_file_dest='/u01/app/oracle/admin/PRIMARY/adump'
audit_trail='db'
compatible='11.2.0.0.0'
control_files='/u01/app/oracle/oradata/PRIMARY/control01.ctl','/u01/app/oracle/oradata/PRIMARY/control02.ctl'
db_block_size=8192
db_domain='SOME.DOMAIN.COM'
db_flashback_retention_target=2880
db_name='PRIMARY'
db_recovery_file_dest_size=2147483648
db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
diagnostic_dest='/u01/app/oracle'
dispatchers='(PROTOCOL=TCP) (SERVICE=PRIMARYXDB)'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
open_cursors=300
pga_aggregate_target=277872640
processes=150
remote_login_passwordfile='EXCLUSIVE'
sga_target=833617920
undo_tablespace='UNDOTBS1'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=STANDBY'
log_archive_dest_2='SERVICE=PRIMARY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) '
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=DEFER
LOG_ARCHIVE_MAX_PROCESSES=30
FAL_SERVER=STANDBY
STANDBY_FILE_MANAGEMENT=AUTO
DB_UNIQUE_NAME=STANDBYFinally
startup nomount
Start RMAN and issue duplicate command
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;
Keys to success
1. New Standby start NOMOUNT on new password file. ( On Oracle 11 you must copy and rename the file from Primary server )
2. Hard coded listener on new Standby server.
3. Correct tnsnames.ora files.
4. Correct duplicate command.
Please consider closing some of you old answered questions
Best Regards
mseberg
Edited by: mseberg on May 10, 2012 7:06 AM

Creating Standby Database from ASM Databse none ASM

I have ASM RAC database running on Solaris 10. I want to take a backup with RMAN and move the Backup to none ASM on other Stand alone server. I want to use this none ASM backup database to create Standby Database for Test purpose. Is it doable? If it is doable can you answer following questions?
What command should I use with RMAN to take a full backup and move it to none ASM platform?
Thank you

Well, the answer is most likely yes, but first need to confirm
- Do you want a physical or logical standby?
- Will the standby run on the same platform , i.e. also Solaris 10?
- What version of database ? It is much easier in 11g.

ORA-19505: failed to identify file - RMAN in creating standby DR database.

I got this error when creating standby database at remote target server.
ORA-19505: failed to identify file "/backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01"
Here is what I did:
1.   started the listener and created corresponding tnsnames entry at remote standyb server
2. startup nomount to the standby database at remote server for an empty instance (instance name dxp1p).
3. All rman backups are in the /backup mount point at primary and the mount point is shared on the remote server as nfs.   So, whatever have in the backup we should be able to see and read from the remote as well.
4. Run the following at primary rman:
sql 'alter system archive log current';
backup current controlfile for standby;
sql 'alter system archive log current';
crosscheck backup;
crosscheck archivelog all;
exit
5.   Start the rman command from primary after connected to the standby server, as the primary DB uses ASM and the standby DB uses file system for the database files:
RUN
SET NEWNAME FOR DATAFILE 1 to '/u01/dxp1p/data/system01.dbf';
SET NEWNAME FOR DATAFILE 2 to '/u01/dxp1p/data/sysaux01.dbf';
SET NEWNAME FOR DATAFILE 3 to '/u01/dxp1p/data/undotbs01.dbf';
SET NEWNAME FOR DATAFILE 4 to '/u01/dxp1p/data/users01.dbf';
SET NEWNAME FOR DATAFILE 5 to '/u01/dxp1p/data/fxtntdata.dbf';
SET NEWNAME FOR DATAFILE 6 to '/u01/dxp1p/data/fxtntindex.dbf';
SET NEWNAME FOR DATAFILE 7 to '/u01/dxp1p/data/mlogs.dbf';
SET NEWNAME FOR DATAFILE 8 to '/u01/dxp1p/data/dts.dbf';
SET NEWNAME FOR DATAFILE 9 to '/u01/dxp1p/data/dxpsoa.dbf';
SET NEWNAME FOR DATAFILE 10 to '/u01/dxp1p/data/expresso_ts.dbf';
SET NEWNAME FOR DATAFILE 11 to '/u01/dxp1p/data/jms_ts.dbf';
SET NEWNAME FOR DATAFILE 12 to '/u01/dxp1p/data/uup_ts.dbf';
SET NEWNAME FOR DATAFILE 13 to '/u01/dxp1p/data/newpage_ts.dbf';
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
ALLOCATE AUXILIARY CHANNEL aux2 DEVICE TYPE DISK;
DUPLICATE TARGET DATABASE for standby
nofilenamecheck
dorecover;
========================================================================
But I got this error from the rman log:
contents of Memory Script:
   set until scn 12245784375453;
   restore clone standby controlfile;
executing Memory Script
executing command: SET until clause
Starting restore at 04-DEC-13
channel aux1: starting datafile backup set restore
channel aux1: restoring control file
channel aux1: reading from backup piece /backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01
channel aux1: ORA-19870: error while restoring backup piece /backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01
ORA-19505: failed to identify file "/backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-01"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel aux1: starting datafile backup set restore
channel aux1: restoring control file
channel aux1: reading from backup piece /backup/dxp1p/online/DXP1P_20131204_833310136_464
channel aux1: ORA-19870: error while restoring backup piece /backup/dxp1p/online/DXP1P_20131204_833310136_464
ORA-19505: failed to identify file "/backup/dxp1p/online/DXP1P_20131204_833310136_464"
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel aux1: starting datafile backup set restore
channel aux1: restoring control file
channel aux1: reading from backup piece /backup/dxp1p/online/DXP1P_CF_c-2027711285-20131204-00
channel aux1: ORA-19504: failed to create file "/oracle/product/11g/dbs/u02/dxp1p/control/control02.ctl"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 2: No such file or directory
Additional information: 1
ORA-19600: input file is control file (/u01/dxp1p/control/control01.ctl)
ORA-19601: output file is control file (/oracle/product/11g/dbs/u02/dxp1p/control/control02.ctl)
Finished restore at 04-DEC-13
contents of Memory Script:
   sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
released channel: aux1
released channel: aux2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/04/2013 19:06:13
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of sql command on clone_default channel at 12/04/2013 19:06:13
RMAN-11003: failure during parse/execution of SQL statement: alter database mount standby database
ORA-00205: error in identifying control file, check alert log for more info
=========================================
Not sure why, can somebody help?   Appreciated!

I used company regular script to login to standby instance as sys user from primary DB RMAN as oracle OS user and sys DB user.   We normally run this way for years.
Like this:
$ORACLE_HOME/bin/rman target=/ auxiliary 'sys/sys0rapr321!'@dxp1p_s11 CMDFILE=${HOME}/dba/scripts/rman_cr_dr.cmd
rman_cr_dr.cmd:
RUN
SET NEWNAME FOR DATAFILE 1 to '/u01/dxp1p/data/system01.dbf';
SET NEWNAME FOR DATAFILE 2 to '/u01/dxp1p/data/sysaux01.dbf';
SET NEWNAME FOR DATAFILE 3 to '/u01/dxp1p/data/undotbs01.dbf';
SET NEWNAME FOR DATAFILE 4 to '/u01/dxp1p/data/users01.dbf';
SET NEWNAME FOR DATAFILE 5 to '/u01/dxp1p/data/fxtntdata.dbf';
SET NEWNAME FOR DATAFILE 6 to '/u01/dxp1p/data/fxtntindex.dbf';
SET NEWNAME FOR DATAFILE 7 to '/u01/dxp1p/data/mlogs.dbf';
SET NEWNAME FOR DATAFILE 8 to '/u01/dxp1p/data/dts.dbf';
SET NEWNAME FOR DATAFILE 9 to '/u01/dxp1p/data/dxpsoa.dbf';
SET NEWNAME FOR DATAFILE 10 to '/u01/dxp1p/data/expresso_ts.dbf';
SET NEWNAME FOR DATAFILE 11 to '/u01/dxp1p/data/jms_ts.dbf';
SET NEWNAME FOR DATAFILE 12 to '/u01/dxp1p/data/uup_ts.dbf';
SET NEWNAME FOR DATAFILE 13 to '/u01/dxp1p/data/newpage_ts.dbf';
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
ALLOCATE AUXILIARY CHANNEL aux2 DEVICE TYPE DISK;
DUPLICATE TARGET DATABASE for standby
nofilenamecheck
dorecover;
exit
==========================
Oinstall is a group.   I am not sure to use oinstall as a user?

Need a help: how to recover using backup control file?

Please a help:
First computer
1. I create a database
2. put it in archive mode,
3. shutdown and made a cold backup
4. Created backup control file (alter database backup control file to trace)
5. I started up and created some archived log files.
Second Computer
1. I copied all files created in the step 3 above except the control file
2. I create all the same map directory on the 2nd computer as in the 1st computer
3. I recreate the control file from the script got in the step 4 above
4. I Copy archived log files generated at the step 5 in the local directory in the second computer
5. I set the logsource and set the autorecovery to on
6. I recover the database: RECOVER DATABASE USING BACKUP CONTROL FILE UNTIL CANCEL
Error got:
the archived log file applied do not go beyond the first one?,How could I do to applied all archived log files copied from the first computer to the second computer to have the same data?
Thank you very much

archived log sequeces in the first computerSQL> select sequence#,first_change#,next_change# from v$log_history;
SEQUENCE# FIRST_CHANGE# NEXT_CHANGE#
1 553723 555484
2 555484 557345
Actions I did in the second Computer(after copied the former two archived log files from the 1st computer)
SQL> CREATE CONTROLFILE REUSE DATABASE "ORCL" RESETLOGS ARCHIVELOG
2 MAXLOGFILES 16
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 100
5 MAXINSTANCES 8
6 MAXLOGHISTORY 292
7 LOGFILE
8 GROUP 1 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG' SIZE 50M,
9 GROUP 2 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG' SIZE 50M,
10 GROUP 3 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG' SIZE 50M
11 -- STANDBY LOGFILE
12 DATAFILE
13 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF',
14 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF',
15 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF',
16 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF'
17 CHARACTER SET WE8ISO8859P1
18 ;
Control file created.
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Disabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 0
Next log sequence to archive 0
Current log sequence 0
SQL> alter database archivelog;
Database altered.
SQL> set logsource C:\local_destination1_orcl
SQL> set autorecovery on;
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 555611 generated at 01/18/2007 14:14:14 needed for thread 1
ORA-00289: suggestion :
C:\LOCAL_DESTINATION1_ORCL\ARCH.1_1_612194518_43F17CF5.ARC
ORA-00280: change 555611 for thread 1 is in sequence #1
ORA-00328: archived log ends at change 555483, need later change 555611
ORA-00334: archived log:
'C:\LOCAL_DESTINATION1_ORCL\ARCH.1_1_612194518_43F17CF5.ARC'
Idon't know where the change 555611 is coming from?

Problem with create standby by rman oracle9.2

I have a problem: until create standby database by rman i have error:
RMAN-03015: error occurred in stored script opomc_clone
RMAN-03002: failure of Duplicate Db command at 02/18/2010 12:26:34
RMAN-03015: error occurred in stored script Memory Script
ORA-19587:
ORA-27091: skgfqio:
ORA-27072: skgfdisp:
SVR4 Error: 5: I/O error
Additional information: 349248
The scripts are ok becouse they work earlier.
The main database was a standby but now is primary.
I create new standby base on remote server
I have in bdump strange error for me until create rman copy for standby:
Clearing standby activation ID 1004670785 (0x3be20f41)
The primary database controlfile was created using the
'MAXLOGFILES 5' clause.
The resulting standby controlfile will not have enough
available logfile entries to support an adequate number
of standby redo logfiles. Consider re-creating the
primary controlfile using 'MAXLOGFILES 8' (or larger).
Use the following SQL commands on the standby database to create
standby redo logfiles that match the primary database:
ALTER DATABASE ADD STANDBY LOGFILE 'srl1.f' SIZE 409600000;
ALTER DATABASE ADD STANDBY LOGFILE 'srl2.f' SIZE 409600000;
ALTER DATABASE ADD STANDBY LOGFILE 'srl3.f' SIZE 409600000;
ALTER DATABASE ADD STANDBY LOGFILE 'srl4.f' SIZE 409600000;
Any suggestions?
Sorry for my english :)
Edited by: user12044451 on 2010-02-18 03:56

can you use like this
BACKUP DATABASE INCLUDE CURRENT CONTROLFILE FOR STANDBY PLUS ARCHIVELOG;startup nomount;
duplicate target database for standby nofilenamecheck;
in detail check
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmstand.htm#1000921

Using Backup at Primrary to Create Standby

Similar Messages

Maybe you are looking for