Using ColdFusion components

This question was posted in response to the following article: http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7874a.h tml

Keep in mind that it's till there... for now. According to their site, CF support in DW is deprecated, and who knows if it will continue to exist?
And it's still there, I suspect, only because totally ripping it out would have been too much extra work. And who knows if, say, any new tags added in CF10 will be added to the code coloring and hinting?
Personally, I consider it sad for Adobe to fail to support their own technologies, and it's somewhat telling that it seems to be the direct opposite of the way they went when they wanted to push Flash, and made sure EVERY product supported it in some form or another. Flash, apparently, was important. CF? Not so much.
I also find it somewhat odd that they seem bent on making DW some sort of "pure" HTML product (though they kept PHP support). DW, Animate, Edge Code, Reflow, Inspect... how many HMTL-only products do they need?
I have a CC subsciption primarily for DW and PS. Keep this up, and it's just PS. And since I don't do print work, or need CYMK support, it's entirely possible I can find other tools (PIxelmator) to do the job.

Similar Messages

You shouldn't use Coldfusion Components because...

Are there any good answers to this question? My boss refuses
to let me use Coldfusion Components because, according to our
sys-admin:
"using the components allows you to extend internal
ColdFusion functions. This has been identified as a security
issue."
And because of this, he believes that he would have to either
not allow them or:
"Define a security Sandbox for each developer. The Sandbox
defines which components can be used and which cannot."
I have tried to read up on this issue over the past few days
but am just not finding the information that I need to address his
problems.
Any suggestions?

>>My boss refuses to let me use
Coldfusion Components because, according to our sys-admin:
"using the components allows you to extend internal
ColdFusion functions.
This
has been identified as a security issue."
Your boss has no clue , your sys admin even less.
There is NOTHING you can do in CFC that you can't do in a
cfml page. CFC's
are more a logical division for the developer and offer no
more or less
security risk. By your boss/sys-admins logic, you shouldn't
even be using
CFML pages. If you can do damage to security with a CFC, then
you can also
do it with a standard page.
Ask your boss what particular function or action can be
performed in a CFC
that can't be performed in standard page. There are none. A
cfml page and
CFC are really the same thing (even compile down to the same
thing)
The only thing I can think of is that are being misled by the
word
'component' and are thinking more along the lines of MS
components that were
used with traditional ASP. Some of these components caused
security
concerns. But CFC's are not the same kind of component - this
is just an
unfortunate naming coincidence. They should just of called
them CF Objects
or CF Classes. Then your boss/sys-admin would never have
blinked an eye or
been concerned about using them.
Educate them.
"quaidbrown2" <[email protected]> wrote in
message
news:[email protected]...
> Are there any good answers to this question? My boss
refuses to let me use
> Coldfusion Components because, according to our
sys-admin:
> "using the components allows you to extend internal
ColdFusion functions.
> This
> has been identified as a security issue."
>
> And because of this, he believes that he would have to
either not allow
> them
> or:
> "Define a security Sandbox for each developer. The
Sandbox defines which
> components can be used and which cannot."
>
> I have tried to read up on this issue over the past few
days but am just
> not
> finding the information that I need to address his
problems.
>
> Any suggestions?
>

CF8: Cluster session-based ColdFusion Components

Using CF8:
Is it possible to store ColdFusion components in the session
scope when using clustering and session failover?
Is it possible to replicate their state across a ColdFusion MX
cluster?
I remember that with cf6 and cf7 it wasn't possible (
http://www.adobe.com/devnet/coldfusion/j2ee/articles/endtoend.html).
I think that the CFC serialization is the answer: but I'm not sure.
thanks in advance
federico

quote:
Originally posted by:
Grizzly9279
My understanding is that CF8 supports CFC serialization now,
which implies that CFCs stored in session should successfully
replicate across cluster nodes.
yes! Finally it's possible!
http://livedocs.adobe.com/coldfusion/8/htmldocs/help.html?content=clustering_6.html
federico

Access to database using ColdFusion & Flex

Hi, I install a ColdFusion MX 7 Updater 2 in my ColdFusion
Server but don't
work it.... my server has a Windows Server 2003 Enterprise
and we are
developing an aplication in Flex 2 and we are using
ColdFusion for connect
to data base but Flex 2 need a ColdFusion MX 7 Updater 2 to
install Flex
Data Services Adapter - enabling the use of Flex Data
Management Services
with ColdFusion components (CFCs). In Adobe web site
http://www.adobe.com/support/documentation/en/coldfusion/mx702/cf702_install.html)
are an instrucctions about install this updater, I follow
this instructions
and install this updater correctly, check the existence of
this files:
cf_root\lib/cfusion.jar
cf_root\lib/im.jar
cf_root\lib/wsdl4j-1.5.1.jar
cf_webroot/CFIDE/adminapi/Application.cfm
cf_webroot/CFIDE/administrator/Application.cfm
This instalation create a Flex folder in WEB-INF folder, this
WEB-INF folder
is in CFusionMX7 directory in Inetpub. And everything is OK
but in Flex
Builder 2, when I attempt to create a new project and appear
a wizard window
and I select a project with Cold Fusion Remoting Sevice, in
second step I
got to select a Root folder and send me an error window tell
me that I got
an Invalid server root. Server root must contain a
WEB-INF/flex folder and I
check and this folder it exist....So can anybody help me????
MSN [email protected]

Did you shut down the database before moving files?I didn't move any files, I just copied some files to the other node.
Can you connect in sqlplus?Yes that was possible. I also had a connection to the database using TOAD.
After looking for the problem together with a colleague I've found out that I had to add some more listening addresses. The problem was that my nodes node1 and node2 have the IPs 10.10.10.2 and 10.10.10.3 but the virtual server of the cluster which forms the database oracledb for the clients runs on 10.10.10.103. So there was the name for e.g. node1 in the configuration files but also the IP-address 10.10.10.103 which the system couldn't resolve. After adding all possibilities using the Net Manager and after restarting the services it worked fine. At least until now. I haven't tried everything yet... I will go on tomorrow... thx so far.

How do you construct a web form using coldfusion??

How do you construct a web form using coldfusion?? any
examples?
thanks in adv.

A sample Form:
<cfform action="CCARProc.cfm"
enctype="multipart/form-data" method="post" name="CCAR"
onsubmit="return verify()">
<table width="730" border="0" cellpadding="2"
cellspacing="1" align="center" class="unnamed1">

<tr valign="top">
<td colspan="3" bgcolor="#F2F2F2">Name Of
Requester(<font color="red">*</font>)</td>
<td width="402" bgcolor="#F2F2F2"><cfinput
type="text" name="Requestor_Name" size="15" value="#REQNAME#"
maxlength="25" >
MTABT Email(<font
color="red">*</font>)
<cfinput name="Req_Email" type="text" size="8"
maxlength="20" value="#ReqEmail#"
>@mtabt.org</td></tr>
<tr>
<td colspan="3">Requester Telephone #(<font
color="red">*</font>) </td>
<td><cfinput type="text" VALUE="#REQPHONE#"
name="RPhone" size="12" maxlength="12" message="Requester Phone
cannot be blank / Invalid Entry!" required="yes"
validate="telephone"> [e.g. xxx xxx xxxx or
xxx-xxx-xxxx]</td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">Facility(<font
color="red">*</font>)</td>
<td bgcolor="#F2F2F2">
<cfselect name="Facil">
<option value="2B">2B </option>
<option value="BBT">BBT </option>
<option value="BW">BW </option>
<option value="CB">CB </option>
<option value="HH">HH </option>
<option value="MP">MP </option>
<option value="QMT">QMT </option>
<option value="RI">RI </option>
<option value="TM">TM </option>
<option value="TB">TB </option>
<option value="TN">TN </option>
<option value="VN">VN </option>
</cfselect>
</td>
</tr>
<tr>
<td colspan="3">Department(<font
color="red">*</font>)</td>
<td><cfselect name="Dept">
<option value="Contracts">Contracts </option>
<option value="Engineering">Engineering
</option>
<option value="Executive Office">Executive
Office</option>
<option value="Finance">Finance </option>
<option value="General Counsel">General Counsel
</option>
<option value="HS">HS </option>
<option value="HR">HR </option>
<option value="ISD">ISD</option>
<option value="Legal">Legal </option>
<option value="Labor Relations">Labor Relations
</option>
<option value="Operations">Operations </option>
<option value="Payroll">Payroll </option>
<option value="Planning & Budget">Planning &
Budget </option>
<option value="Procurement & Mtrl">Procurement
& Mtrl </option>
<option value="Purchasing">Purchasing </option>
<option value="Revenue Management">Revenue Management
</option>
<option value="Staff Services">Staff Services
</option>
<option value="SD">SD</option>
<option value="Technology">Technology</option>
</cfselect></td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">Division(<font
color="red">*</font>)</td>
<td bgcolor="#F2F2F2"><cfinput name="Div"
type="text" size="20" maxlength="25" VALUE=""></td>
</tr>
<tr valign="top">
<td height="27" colspan="3" >Justification(<font
color="red">*</font>)</td>
<td bgcolor=""><textarea name="Justi" cols="50"
rows="3" wrap="VIRTUAL" ></textarea> </td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">VP Approval
By (<font color="red">*</font>)</td>
<td bgcolor="#F2F2F2"><cfinput name="VPAppFName"
type="text" size="20" maxlength="25" VALUE="#VPFName#">
MTABT
Email(<font color="red">*</font>)
<cfinput name="VPE" type="text" size="8" maxlength="20"
value="#VPEmail#" >@mtabt.org</td>
</tr>
<tr>
<td colspan="3" valign="top"
bgcolor="#F2F2F2"></td>
<td colspan="2" rowspan="2" valign="top"
bgcolor="#F2F2F2"><div align="left">
<input name="Submit" type="submit" value="SubmitTheForm"
class="button"
style="font-size='10pt';color='#663399';font-face='Arial,
Helvetica, sans-serif';" >
<input name="Reset" type="reset" value="ReSetTheForm"
class="button"
style="font-size='10pt';color='#663399';font-face='Arial,
Helvetica, sans-serif';">
</div></td>
<td width="90" valign="top"
bgcolor="#F2F2F2"></td>
</tr>
</table>
<div align="right"><span class="style4">Revised(
01.28.05 )</span>
<input name="submitDate" type="hidden"
value="<cfoutput>#DateFormat(Now(),'mm/dd/yy')#</cfoutput>">
</div>
</cfform>

I can't use swing components in my applets

When I write an applet without any swing components, my browser never has any trouble finding the classes it needs, whether they're classes I've written or classes that came with Java. However, when I try to use swing components it cannot find them, because it is looking in the wrong place:
On my computer I have a directory called C:\Java, into which I installed my Java Development Kit (so Sun's classes are stored in the default location within that directory, wherever that is), and I store my classes in C:\Java\Files\[path depends on package]. My browser gives an error message along the lines of "Cannot find class JFrame at C:\Java\Files\javax\swing\JFrame.class"; it shouldn't be looking for this non-existent directory, it should find the swing components where it finds, for example, the Applet class and the Graphics class.
Is there any way I can set the classpath on my browser? Are the swing components stored separately from other classes (I'm using the J2SE v1.3)?
Thanks in advance.

Without having complete information, it appears that you are running your applets using the browser's VM. Further, I assume you are using either IE or Netscape Navigator pre-v6. In that case, your browser only supports Java 1.1, and Swing was implemented in Java 1.2. You need to use the Java plug-in in order to use the Swing classes (see the Plug-in forum for more information), or else download the Swing classes from Sun and include them in your CLASSPATH.
HTH,
Carl Rapson

I can't figure out how to use coldfusion debugging on a remote server

I can't figure out how to use coldfusion debugging on a CF
installation on a remote server. Has anyone got experiance, I can't
find any step by step instructions on how to do this using FLEX
BUILDER 3

Look at Chapter 13 of the iPad iOS4.3 User Guide

How do I create a kerberos ticket using coldfusion

I have 3 apps on our intra net that require authentication and would like to use kerberos to accomplish this. This is my set up.
users log in to the network and authenticate via active directory (all windows based) , Our web apps are on a box running solaris 10, weblogic app server, cf 9 and oracle 11g. A group of our web apps on this sever require users to authenticate through oracle (not the web / app server).
I can authenticate with kerberos via a putty session on the server with no problems.
USEING COLDFUSION, how do i request a kerberos ticket and pass the necessary credentials to authenticate.?
can this be done.?
I am looking for a CODE SAMPLE OF HOW DO THIS IN A UNIX environment NOT WINDOWS.
I appologize for the frustrated tone of this post. However, after a week of reading documentation til my eyes bleed, to end up chasing my tail with no truly help info............
TIA
JB

This is something your web server should do, not CF. Configure your web server to participate in the Kerberos realm. If WebLogic is the web server (and not just the application server) configure that:
http://download.oracle.com/docs/cd/E13222_01/wls/docs81/secmanage/sso.html
If you have WebLogic configured to use Apache as a web server, configure that:
http://modauthkerb.sourceforge.net/
http://support.microsoft.com/kb/555092
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

How Do I Print my reports Horizontally using Coldfusion Report Builder

Hi-
I want to print my reports Horizontally rather vertically using Coldfusion Report Builder. I am using a very simple query
SELECT
      Zones.Zone_id,
      Zones.Zone_name,
     Count(employees.cnic) as Employees
FROM Zones, Employees
WHERE Zones.zone_id=Employees.zone_id
GROUP BY Zones.zone_name
Or say Daily/Monthly Zone Sale with Zones in Rows and Dates/Months in Columns
Thanks
Tayyab Hussain

Have a look at my response to your post in the Report Builder sub-forum.

How to use "used webdynpro components" in nwds 7.0

hi all,
I am using NWDS 7.0 SP8 version. I want to use my local DC1 in my local DC2. I have created public part of DC1 and integrated it into DC2 as used DC. But when I try to add the webdynpro component from the Used Webdynpro Components of DC2, I am not able to view the DC1component. Plz let me know the procedures that I need to follow to fix this issue.
Regards,
Athulya.

hi
i will mention the steps that I have done for the same.
1. Create DC1- LocalDevelopmentdc1sap.com
    . Create PP(Provides an API)->PP_DC1
    . Webdynpro Component->DC1Comp->Add as Source
    . Finish
    . Rebuild
    . Deploy
2. Create DC2- LocalDevelopmentdc2sap.com
    . Right Click Used Dc's- Selected PP_DC1(Build, Run)
    . Finish
    . DC->Build
    . Right Click Used Webdynpro Components->Add Webdynpro Component->
                                                                   Browse->Can find only DC2Comp....
Plz correct me if I have done something wrong.
Regards,
Athulya

How to use an existing data model using Business Components in OEPE

I am a beginner in ADF. I am working on a project with an existing data model that uses Business Components (EO, VO and AM). I know that OEPE does not handle the creation of BC, so if I want to modify them, I will have to do that in JDev. That's fine.
OEPE can create pages with drag and drop like in JDev. In my eclipse ADF projects, I would like to use the existing BC, to be able to use the bindings with ADF Faces. So far I have nothing in the Data Controls tab.
How to import the BC into the Data Controls tab?
JDev 11.1.1.6
WLS 10.3.6
Eclipse Kepler

We currently don't support DataControls based on the ADF BC technology. We will consider such support if there is a strong interest in that use case.
Independent of the IDE's you use, there are ways to expose services based on ADF BC that can then be consumed by the view layer. A Google search will point you to some of the approaches.
HTH. Thanks for your interest in OEPE.

Why do we need a Self Reference "me" to use the components of a class

Hi
I am not clear why do we need a self reference variable "me" to call the components of its own class? when it can be accessed directly as in the following examples?
In my first example below i can call the method display_name directly without creating a reference object or instance of the class within the class.
In the second example i am using the self refernce Write me->name to access the component of a class.
My question is why do we need "me" when i can use the components directly as shown in my first example.
CLASS egocentric DEFINITION.
PUBLIC SECTION.
    DATA:
     name(10) TYPE c READ-ONLY.
    METHODS set_name.
    METHODS display_name.
ENDCLASS.                    "egocentric DEFINITION
*       CLASS egocentric IMPLEMENTATION
CLASS egocentric IMPLEMENTATION.
METHOD set_name.
    MOVE 'Abap Objects' TO name.
    CALL method display_name.
ENDMETHOD.                    "write_name
METHOD display_name.
    write: name.
ENDMETHOD.                    "display_name
ENDCLASS.                    "egocentric IMPLEMENTATION
*Global Data
DATA oref TYPE REF TO egocentric.
START-OF-SELECTION.
CREATE OBJECT oref.
CALL METHOD oref->set_name.
CLASS egocentric DEFINITION.
        PUBLIC SECTION.
            DATA:
             name(10) TYPE c VALUE u2018Instructoru2019
READ-ONLY.
             METHODS write_name.
ENDCLASS.
CLASS egocentric IMPLEMENTATION.
        METHOD write_name.
            WRITE me->name.
        ENDMETHOD.
ENDCLASS.
*Global Data
DATA oref TYPE REF TO egocentric.
START-OF-SELECTION.
        CREATE OBJECT oref.
        CALL METHOD oref->write_name.

You can go WIKI and search with ABAP Objects.
Or do the same in 'advanced search' and select a search area. You are bound to find something.
Or this link perhaps:
[abap objects|http://help.sap.com/saphelp_nw70/helpdata/EN/ce/b518b6513611d194a50000e8353423/content.htm]

Using mx components in Action Script project in Flash Builder

Hi
I have created an Action Script project in flash builder 4 and want to use a mx.controls.button.
The as file looks like this:
package
    import flash.display.Sprite;
    import mx.controls.Button;
    public class as_test_project extends Sprite
        public function as_test_project()
            var btn:Button = new Button();
            btn.label = "test";
            addChild(btn);
I have added C:\Program Files\Adobe\Adobe Flash Builder 4\sdks\4.0.0\frameworks\projects\framework\src as a Source Path in the project settings. I have also added framework.swc to the library path.
I still get errors like :
Description    Resource    Path    Location    Type
Unable to resolve resource bundle "core" for locale "en_US".    as_test_project        Unknown    Flex Problem
Have then tried added various Bundles folders like
C:\Program Files\Adobe\Adobe Flash Builder 4\sdks\4.0.0\frameworks\projects\framework\bundles
to the source path and library path, but I still get the errors.
WHAT IS THE CORRECT WAY OF USING MX COMPONENTS IN A PURE ACTION SCRIPT PROJECT ?
If I want to use th fl.controls componets instead but dont have CS3 where can I download them ?

Thank you for your quick reply.
But how then can I obtain the fl.controls components and use them in an Action
Script project in Flash Builder 4?
I don't have CS3 or CS4 (the flash authoring tool) installed.
Is there an SWC somewhere to be downloaded?

How to remove white spaces from XML content using Coldfusion?

Hi,
Can anybody help me in removing white spaces in between the tags from the below XML content using coldfusion?
XML content:
<?xml version="1.0" encoding="UTF-8"?> <chart showdates="true" today="08/12/2009"> <phases> <phase color="CCFFCC" name="Funded"/> <phase color="CDCD67" name="Concept"/> <phase color="99CCFF" name="Feasibility"/> <phase color="0099FF" name="Development"/> <phase color="0099FF" name="Development"/> <phase color="CC99FF" name="Close-out"/> <phase color="909090" name="Sustaining"/> </phases><program name=""> <project enddate=" 30/03/2007 " id="43250" startdate=" 28/02/2006 "> <version enddate=" 30/03/2007 " number=" 1" startdate=" 28/02/2006 "> <phase color="CCFFCC" currentdate="23/03/2006" name="Project Start" plandate="28/02/2006" type="phase"/> <phase color="99CCFF" currentdate="04/04/2006" name="Feasibility Closure" plandate="31/05/2006" type="phase"/> <phase color="0099FF" currentdate="29/03/2007" name="Commercialization" plandate="30/12/2006" type="phase"/> <phase color="CC99FF" currentdate="30/03/2007" name="Project Closed" plandate="30/03/2007" type="phase"/> <phase color="909090" currentdate="" name="Obsolescence" plandate="" type="phase"/> </version> </project> </program> </chart>
Output I am expecting is like below,
<?xml version="1.0" encoding="UTF-8"?><chart showdates="true" today="08/12/2009"><phases><phase color="CCFFCC" name="Funded"/><phase color="CDCD67" name="Concept"/><phase color="99CCFF" name="Feasibility"/><phase color="0099FF" name="Development"/><phase color="0099FF" name="Development"/><phase color="CC99FF" name="Close-out"/><phase color="909090" name="Sustaining"/></phases><program name=""><project enddate=" 30/03/2007 " id="43250" startdate=" 28/02/2006 "><version enddate=" 30/03/2007 " number=" 1" startdate=" 28/02/2006 "><phase color="CCFFCC" currentdate="23/03/2006" name="Project Start" plandate="28/02/2006" type="phase"/><phase color="99CCFF" currentdate="04/04/2006" name="Feasibility Closure" plandate="31/05/2006" type="phase"/><phase color="0099FF" currentdate="29/03/2007" name="Commercialization" plandate="30/12/2006" type="phase"/><phase color="CC99FF" currentdate="30/03/2007" name="Project Closed" plandate="30/03/2007" type="phase"/><phase color="909090" currentdate="" name="Obsolescence" plandate="" type="phase"/></version> </project></program></chart>
Thanks in advance,
Regards,
Manoz.

Daverms,
Thanks for the quick turn around..
I have applied the solution what you suggested above (<cfprocessingdrirective suppresswhitespaces="yes"), still whitespaces are existing in my output.
The output what I am getting is,
(blue color part is my output & red color indicates whitespaces)
<?xml version="1.0" encoding="UTF-8"?>
<chart showdates="true" today="09/12/2009">
<phases>
<phase color="CCFFCC" name="Funded"/>
<phase color="CDCD67" name="Concept"/>
<phase color="99CCFF" name="Feasibility"/>
<phase color="0099FF" name="Development"/>
<phase color="0099FF" name="Development"/>
<phase color="CC99FF" name="Close-out"/>
<phase color="909090" name="Sustaining"/>
</phases>
<program name="">
<project enddate=" 01/01/2010 " id="12059" startdate=" 20/06/2003 ">
<version enddate=" 01/01/2010 " number=" 1" startdate=" 20/06/2003 ">
        <phase color="CCFFCC" currentdate="20/06/2003" name="Project Start" plandate="20/06/2003" type="phase"/>
        <phase color="CDCD67" currentdate="" name="Concept Closure" plandate="" type="phase"/>
        <phase color="99CCFF" currentdate="20/06/2003" name="Feasibility Closure" plandate="20/06/2003" type="phase"/>
        <phase color="F0FF00" currentdate="" name="Alpha Test" plandate="" type="milestone"/>
        <phase color="F0FF00" currentdate="26/07/2004" name="Beta Test" plandate="31/05/2004" type="milestone"/>
        <phase color="0099FF" currentdate="29/06/2005" name="Commercialization" plandate="08/12/2004" type="phase"/>
        <phase color="CC99FF" currentdate="24/02/2006" name="Project Closed" plandate="01/01/2010" type="phase"/>
        </version>
<subproject enddate=" 16/10/2008 " id="11809" name="espWatcher Pricing Toolkit" startdate=" 01/08/2003 ">
<version enddate=" 16/10/2008 " number=" 1" startdate=" 01/08/2003 ">
        <phase color="CCFFCC" currentdate="01/08/2003" name="Project Start" plandate="01/08/2003" type="phase"/>
        <phase color="99CCFF" currentdate="" name="Feasibility Closure" plandate="" type="phase"/>
        <phase color="0099FF" currentdate="15/06/2005" name="Commercialization" plandate="08/12/2004" type="phase"/>
        <phase color="CC99FF" currentdate="16/10/2008" name="Project Closed" plandate="16/10/2008" type="phase"/>
        </version>
</subproject>
<subproject enddate=" 31/12/2070 " id="35704" name="espWatcher version 2 (2005)" startdate=" 01/01/2005 ">
<version enddate=" 31/12/2070 " number=" 1" startdate=" 01/01/2005 ">
        <phase color="CCFFCC" currentdate="01/01/2005" name="Project Start" plandate="01/01/2005" type="phase"/>
        <phase color="99CCFF" currentdate="01/07/2005" name="Feasibility Closure" plandate="01/07/2005" type="phase"/>
        <phase color="0099FF" currentdate="31/03/2006" name="Commercialization" plandate="31/03/2006" type="phase"/>
        <phase color="CC99FF" currentdate="31/12/2070" name="Project Closed" plandate="31/12/2070" type="phase"/>
        </version>
</subproject>
</project>
</program>
</chart>
However this solution removes most of the whitespaces, I want exact output as flash file is expecting so..
Where ever I am calling the CF functions, there I am getting the whitespaces. like below cases.
startdate="#getProjectStartDate(sProjectIdList)#" -> output I am getting for this statement is -> " 12/09/2009 "
Please assist me...
Regards,
Manoz.

How to display the Current Date on page using ADF Components

Hi,
Is there any way to display the system date on a page developed using ADF Components.
I am thinking of writing the java code to display the date. Just wanted to check is there any pre-defined component of ADF that I can make use of.
Could anyone tell me how to do this using ADF components?
Thanks in advance.
Sivaji....

Please refer the below link.
Prompt with default date ( currentdate-1 and current date-8)
http://www.dagira.com/2008/07/15/how-can-i-make-today-my-default-prompt-value/
http://www.dagira.com/2008/07/21/using-a-magic-date-value-in-prompts/
Regards,
Bilahari

Using ColdFusion components

Similar Messages

Maybe you are looking for