Using default web interface for users

I wish to use the default web interface for my users, I do not have the time to develop a custom app. I wish to get rid of the group and and mount point folders.
Please Help,
Jeff

CM SDK 9.0.4 (released very shortly) includes the "Web Starter Application". This is a J2EE Web Application with full MVC architecture and completely open source!
You may be able to obtain this application sooner from Oracle Consulting - it will work on the current CM SDK 9.0.3.
JSP and Tag Libraries make up the UI. The controller framework is similar to Jakarta Struts. It offers localization support, ADA compliance etc.
You can easily develop the application from JDeveloper and deploy to 9iAS.
Matt.

Similar Messages

  • Variable Selection For User in Web Interface for BPS

    Hi All,
    I've created a manual Input sheet in BPS0 to upload target sales. User need to select the month, plant and then enter the target amount for each category. Its working fine.
    Now I need to create web interface for user to upload the data every month. Using BPS_WB I've created the interface (with help of Wizard). I'm getting the input sheet. But I'm not able to get screen where user can select the parameters?
    How to get this? It should work like web report, where user select the report variables then execute. Only difference here is user will have to enter the data for selected variable.
    Thanks in advance.
    Regards: Gaurave

    Hi....add the variables to a folder along with the layout. Then create the web interface.

  • Error while calling RFC when using BSP Web Interface

    Hi,
    we have a problem with the Authorization when we use an Web Interface for BSP. We have assigned all roles to the user which were mentioned in the SAP standard documentation:
    R_AREA   
    R_METHOD 
    R_PACKAGE
    R_PARAM  
    R_PLEVEL 
    R_PM_NAME
    R_PROFILE
    R_STS_PT 
    R_STS_SUP
    R_WEBITF 
    S_RS_ADMWB
    S_RS_AUTH
    S_RS_COMP
    S_RS_COMP1
    S_RS_DAS 
    S_RS_ICUBE
    but we still get the error message: "Error while calling RFC".
    When using a user with SAP_ALL, it works.
    What can we do?
    Thx for your time.
    Joerg

    Actually that's surprising - because BSP (Business Server Pages) and RFC (Remote Function Call) are not related; they use totally different transport protocols (http vs. RFC). Even if an BSP application is calling a function module remotely (acting as RFC client) no authorizations for S_RFC are required - in the calling system (but in the called system, i.e. the RFC server).
    Since assigning SAP_ALL seems to "cure" the problem, it seems to be an authorization issue, indeed. In that case it makes sense to use the authorization trace (ST01 - notice: that's specific to one single ABAP application server; you might have to activate the trace on multiple instances) to find out which authorizations are checked / demanded.

  • How to set the default web site for WGM users

    Hi,
    In Tiger server there was a place to input the URL of the default web page for all browsers when users logged into network home folders. This was really helpful and saved a bunch of bandwidth and class time. Is there any way to do this in Leopard server? If so, please point me in the right direction.
    Thanks,
    ..Tom

    Antonio, Thanks! That seems to have worked for Safari. However, we like Firefox too, and I tried to set that up the same way, but was told "can't find a manifest for that app". I wonder if I can copy the Safari list then alter and rename it?
    ...Tom

  • Aironet 1240AG - cant use the web interface

    I am trying to configure a new Aironet 1240AG. After it picked an ip address from the DHCP in my lan, I still can't log in using the web interface. I am using an Internet Explorer 6.0 on Win 2000. It keeps telling me cannot find server. please i need assistance

    Hi Obinna,
    Sorry about the link :( The problem here is the fact that 12.3.(11)JX is a Lightweight image. Have a look;
    Warning: All Cisco Aironet Access Points receiving Cisco IOS Software Release 12.3(11)JX will only function in conjunction with a Cisco Wireless LAN Controller. They will no longer be able to function as Cisco Aironet Autonomous Access Points.
    This product bulletin describes the content and delivery information for Cisco IOS Software Release 12.3(11)JX. This is a Cisco Lightweight Access Point Protocol (LWAPP) upgrade and recovery support software image supporting Cisco Aironet 1100, Aironet 1130, Aironet 1200, Aironet 1230 AG, Aironet 1240 AG, and Aironet 1300 Series Access Points.
    http://www.cisco.com/en/US/products/ps5861/prod_bulletin0900aecd804b1a72.html
    You can use this method to convert the AP back to Autonomous Mode (and access via Web);
    Reverting the Access Point Back to Autonomous Mode
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
    You can convert an access point from lightweight mode back to autonomous mode by loading a Cisco IOS Release that supports autonomous mode (Cisco IOS release 12.3(7)JA or earlier). If the access point is associated to a controller, you can use the controller to load the Cisco IOS release. If the access point is not associated to a controller, you can load the Cisco IOS release using TFTP.
    Using a TFTP Server to Return to a Previous Release
    Follow these steps to revert from LWAPP mode to autonomous mode by loading a Cisco IOS release using a TFTP server:
    Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.
    Step 2 Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated.
    Step 3 Rename the access point image file in the TFTP server folder to c1200-k9w7-tar.default for a 1200 series access point, c1130-k9w7-tar.default for an 1130 series access point, and c1240-k9w7-tar.default for a 1240 series access point.
    Step 4 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
    Step 5 Disconnect power from the access point.
    Step 6 Press and hold MODE while you reconnect power to the access point.
    Step 7 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
    Step 8 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
    Step 9 After the access point reboots, reconfigure it using the GUI or the CLI.
    From this doc;
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272
    Hope this helps!
    Rob

  • How to make default personalization options for users

    Hi all,
    How can I make default personalization options for users, so that those will the default options when the user opens the portal BSP applications. Those will be the standard, at later point of time if they want they can personlalize some other fields, but earlier fields will be the default fields and user cant be able to change them.
    Thanks
    Murthy

    Hi Murthy,
    If you use IMG (crmc_blueprint_c) to customize PCUI appl than you can use the personalization feature. If you select 'Not in List' in the IMG for the field in the fieldgroup structure, than this field by default will not be viewable in the List View and will not be checked as 'Visible' in the Personilzation link. So by not selecting 'Not in List' you are giving that field to be viewable and all other fields are available for users to personalize by default.
    If you have maintained the 'List View' using the CRM Designer, than most likely you would lose the above feature, as SAP Standard code considers the CRM Designer as high level of customization.
    Thanks
    Harsh

  • WEB Interface for Visual Admin

    Hi,
    I'm told there is a web interface for the visial admin tool which can be launched from the examples section of the j2ee home page.
    In order to do this you must first deploy the tool.
    I've search the net and marketplace for the tool to download and am unable to find it.
    Has anyone else come across this before??
    Thanks
    Jim
    Message was edited by: Jim OShea

    Hi Jim,
    Are you looking for the Netweaver Administrator?
    Links:
    http://service.sap.com/nwa ( you will need a SAP Service Marketplace user ID for this)
    Introducing SAP NetWeaver Administrator -NWA
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc03a2a2-0a01-0010-b497-87518550e132
    Blog : SAP Developer Network Blog: XI: NetWeaver Administrator - first look - Logs & Traces (by Michal Krawczyk)
    /people/michal.krawczyk2/blog/2005/05/27/xi-netweaver-administrator--first-look--logs-traces
    Cheers
    Manish

  • FAQ: BC-LDAP-USR (Directory Interface for User Management via LDAP )

    Version: 20060317
    Q: Where can i find more information to the BC-LDAP-USR interface ?
    A: Have a look on our ICC webpage in the SDN:
    SAP NetWeaver AS - Directory Interface for User Management via LDAP (BC-LDAP-USR)[1] [original link is broken]
    Q: What costs a arising when we want our product to be certified ?
    A: See also our SDN page under the headline "Price List".
    Q: Is there a link/page for the already certified products for this interface ?
    A: Sure, have a look on our ICC page under the headline "Certified Solutions"
    Q: Who can we ask in case of general question ?
    A: Have a look at our general ICC forum:
    SAP Integration and Certification Center (SAP ICC)
    Of course, if you have urgent requests you can send them also directly to our local ICC's:
    ICC Walldorf in Germany: [email protected]
    ICC Palo Alto in USA: [email protected]
    ICC Bangalore in India: [email protected]
    Q: Who can we ask in case of technical questions ?
    A: This depends on the state of your certification project.
    1.) If the certification contracts have been signed then you can ask in this forum and if this does not solve your question go back to your assigned integration consultant.
    2.) When the certification contracts have not been signed then you can ask questions in this forum.

    I distinguish it using the passwordExpirationTime(or something like that, i don't have code here with me).
    This is possible if after password is expired user has at least one more access.It is a user policy that can be set in the Ldap server.
    If it is possible, user can still login and perform operations.You chan search the passwordExpirationTime attribute and determine if password is expired, and the send a message to the user, telling him to change it.(If only one access is allowed and you change the password with the same application or service then do not close context, else you should not be able to connect again.) Instead, if you use an external script, then the last acces should not give you problems.
    Hope i made myself clear.

  • WcmUrl - Use default Web site section metadata

    We are generating links using links wizard and using "Use default Web site section metadata" option.
    We are expecting hyperlinked content file displays in the Web site section as currently specified in the Web Site
    Section metadata field for the content file.
    Link wizard is generating following link.
    [!--$wcmUrl(’link’,’10024’)--]
    From the primary page of section 1 and doing mouse over on a secondary page link of section 2. It is generating URL with section 2.
    Issue:
    From the secondary page of section 1 and doing mouse over on a secondary page link of section 2. It is generating URL with section 1.
    Expected:
    From the secondary page of section 1 and doing mouse over on a secondary page link of section 2. It should generate URL with section 2.

    I found my answer in this post: Dynamic Query in Element Definition
    Verified that it works even for 11g

  • Configuring default web apps for virtual hosts

    Hi,
    This posting is meant save time for anyone trying to specify a default web app
    for each of their virtual hosts (as opposed to specifying a default web app for
    each of their wl servers). This applies to weblogic 6.1, on NT. (I haven't tried
    this on other platforms).
    If you are trying to use the admin console to do this, give up. It's not possible.
    The "Virtual Host/Configuration" window lets you specify everything about that
    vhost configuration EXCEPT a default web app. (The "Default Web Application" drop
    down menu will always have only one option to choose from: "none").
    Instead, shutdown your server, and edit your domain's config.xml file manually.
    Attached is an example config file that specifies that the web app "kz" should
    be the default web app for the vhost "wl.kz.com", and that the web app "kahuna"
    should be the default web app for the vhost "www.kahuna.com".
    Hope this helps,
    Brian O'Donnell
    Lead Developer, Learning Network
    [config.xml]

    Hi,
    Is it possible to configure default web appls for virtual hosts
    with Weblogic 6.0 on NT platform? I tried to configure the configure.xml as Brian
    did, it doesnot work. I am just wondering if there's any other possible way to
    do this.
    Thanks.
    Mei
    "Brian O'Donnell" <[email protected]> wrote:
    >
    >
    >
    Hi,
    This posting is meant save time for anyone trying to specify a default
    web app
    for each of their virtual hosts (as opposed to specifying a default web
    app for
    each of their wl servers). This applies to weblogic 6.1, on NT. (I haven't
    tried
    this on other platforms).
    If you are trying to use the admin console to do this, give up. It's
    not possible.
    The "Virtual Host/Configuration" window lets you specify everything about
    that
    vhost configuration EXCEPT a default web app. (The "Default Web Application"
    drop
    down menu will always have only one option to choose from: "none").
    Instead, shutdown your server, and edit your domain's config.xml file
    manually.
    Attached is an example config file that specifies that the web app "kz"
    should
    be the default web app for the vhost "wl.kz.com", and that the web app
    "kahuna"
    should be the default web app for the vhost "www.kahuna.com".
    Hope this helps,
    Brian O'Donnell
    Lead Developer, Learning Network

  • Using one Message Interface for all mappings

    Hi Folks,
    I am using a BPM in which i m getting a file from file system which have system ID in it.
    I am having three send Synchronous step following that.
    What i need is to use the Message interface for file to be used for receiver determination based on system id in case of Synchronous interfaces.
    DO i need to include this File msg. interface in each mapping, if i do so will it be possible to send req. and get response for synchronous call.
    OR is there any way to to use the file msg. interface for each mapping.
    we are on SP17,I also tried Extended mapping but i am having SYNCHRONOUS send steps.
    Plz help me out
    Sachin

    Bhavesh
    <i>1. You receiver a file in your BPM . This has a field called SYSTEM ID?
    2. On the basis of the System ID field you need to determine the Receiver to which the Synchronous Request message has to be sent?</i>
    Sorry for that...because I was confused with jai's ans.. that's why said like that
    <b>You are absolutely correct</b>
    This is what i want to do.
    i can't use switch step here.  my BPM looks like this
    RecFile->sync send->transformation1->transformation2->sync send2->transformation3->BLOCK
    in BLOCK
    Sync Send3->transformation4 and so on...
    I am using three different Sync ABS Interface for each Sync send steps.
    In receiver determination i want to get the data from respective R/3 system based on system ID i.e. logical system in File MI.
    Say if it T90CLNT90 then get data from BS_SAPR3_4.6 else from BS_4.7
    Sachin
    Message was edited by:
            Sachin Dhingra

  • How to use a web site for a camera

    Is it possible to use a web site for a web cam so someone could watch me while we talk. What is the best software to sue for a web cam? I have the Ceative Web Cam NX.
    Thanks

    I would turn on the "show java console" and the "log output" options in the java console. You should then be able to see the reason the application will not start.
    rykk

  • Can i still use Fast Web View for PDF/A files?

    Can i still use Fast Web View for PDF/A files?
    In other words, just becasue I am using PDF/A, can I still select the page i need in a long document and see it before the entire file has loaded?

    macjack has a very valid point, so you might want to consider a second drive for files.
    To partition, you need to boot into the Recovery Volume (command - R) on restart. Select Disk Utility.
    Step 1 - select the hard drive.
    Step 2 - select the Partition tab.
    Step 3 - select the current partition and then use the lower right corner to push up and resize the partition.
    Step 4 - click the plus sign to add a partition. Then select the new partition.
    Step 5 - Name the new partition and select the format. The one shown in the screen shot is generally recomended.
    Step 6 - Hit apply.
    This procedure can be reversed at a later date if you find your Time Machine backup needs more space.

  • Use ANY web template for a theme?

    is it possible to use ANY web template (for ex from template monster) and make it a theme in iweb in which everything still stays connected together?
    Rather than just searching for exact "iweb themes"? cause they all look super generic.
    Message was edited by: proximityblue

    No, you can't unless they were designed for iWeb and come with an installer. If you want something more unique start with a blank white or black theme page and build your own.
    OT

  • Do you use OEM web console for production db ?

    hi guys,
    i am wondering
    do you guys use OEM web console for production db ?
    q1) i am having a few production dbs, none of the servers has public ip access.
    if i were to access the webconsole, i would have to vnc inside the db server itself through (another server on the same network that has a public ip) and access the webconsole locally.
    its so much of an hazzle.
    any workaround for this ? what do you guys do ?
    Regards,
    Noob

    Above: using Brandon Grotesque (web use font) does not display the correct font.
    I'm using Typekit and have an internet connection. If I switch to a "desktop use" font, it shows up, so I'm guessing the "web use" only fonts won't show in Reflow. A little frustrating when you're trying to get an accurate preview/determine best font styling because of the back-and-forth workflow.
    Above: using Source Sans Pro (desktop use font) does display the correct font.

Maybe you are looking for