Using if condition in smartforms

Hi,
I have a requirement like the following in smartforms
if condition satisfy display one set of text or else some other text.(or don't display)
how we can write code in smartforms (not in driver program).If any body knows tell me.
Thanks
Regards,
Nandha

Right click on the window you want to implement the code
Choose Create-> Flow Logic -> Alternative
In the true part -> Right Click (Choose)
Create the Text Elements to be displayed
To implement the code block choose
((( Create -> Flow Logic -> Programs Lines (write your ABAP Code here) ))
Message was edited by: Kanthimathi Krishnan

Similar Messages

How can i give conditions in smartform text editor

Hi all,
i want to display something based on some condition using text element in smartforms , how can i do it.
in SAP Scripts normally we give conditions in text element using command line(/:)
but it wont work in smartforms , how can i give the same in smartforms ?
please help me soon.
thank you.

Hi,
You can use the Conditions tab for the corresponding text.
ex: in the text-editor consider you are displaying a name field based on a variable

ws_name
ws_variable
In the text give the field to be displayed
&ws_name&
In the conditions tab give
ws_variable = 'X'
This will print the value from ws_name only when ws_Variable = 'X'.
Regards,
Tushar

How to use if condition in XML Publisher Desk Top

Hi..,
How to use if condition in XML Publisher desk Top.
Please guide me.
Thanks,
Suresh.

What kind of condition you want to use?
You can use Condition like this:
<?xdofx:if condition then value1
else if condition then Value2
else Value3
end if?>
Please go thru XML Publisher User Guide.
Thanks
Ravi
[email protected]

Using OR condition in RTF Template

Hi,
How to use OR condition in RTF?
say for example,consider the EMP table.
I want to show the employees of department 10 and 20 in my XML Publisher report.
How can i write --
if deptno = 10 or deptno =20 in RTF template

you can add the condition in RTF template
<?if:XMLfield=30 or XMLfield=10 ?> to display <?end if?>

Can we use control events in smartforms

Hi all,
I am srinivas. can we use control events in smartforms, I mean at new, at end of ..... if these are not used can you suggest me any alternative....
Actually my requirement is like a classical report, for which I need to display subtotal and grand totals based on two fields....
Please help me out in this issue as it is very urgent.
<REMOVED BY MODERATOR>
Thanks in advance....
Regards,
Sri...
Message was edited by:
 Alvaro Tejada Galindo

Hi Nick,
 Thanks for the reply... it is really very useful for me.
As I discussed in my earlier mail regarding the output sequence, which should be in the below format.
 number quantity uom unitprice amount curr
plant
 material
 date
 x y z A
 e f g h
 p q r s
 subtotal date..... 1 2 3 4
 subtotal material.5 6 7 8
As you said when I using event of Begin its working fine. but while using the event of end, I am specifying date and then matnr (sort) its taking(nodes are created mean first matnr and then date) in the reverse order and when I am taking matnr and date it is placing the events(nodes) in the right order but the order date is not triggering.
can please tell me how to proceed here..
waiting for your reply..
Regards,
Srinivas

Can we use select options in smartform

can we use select options in smartform if so can any one send me a sample code...
Thanks
bhaskhar

Hi ,
Can u explain why u want to use select options in smartforms . U can try it in program lines .
Its better to use select options in the driver program and fetch data accordingly in the driver program or passing the selected values from select options to the smatfrom and fdetching the data there in smartform .
Regards

If Condition in Smartform - window text- without program lines

Hi,
I have faced one problem in smartforms. In smartforms i have a window (main.) It has five lines. For Fifth line only i need to check one condition. if it is true then print the Line otherwise i need one Blank line to print.
How i write if condition in smartforms window - text.
Mahesh.

Hi Mahesh,
You need to create and alternative node and put your text into that. An alternative will check a condition, and process one of two nodes depending if it is true or false. Based on your condition, on true you can have your current text element and on false a text element containing a blank line.
Regards,
Nick

Using If condition in For EACH Group

Hi all,
I want to use if condition in for-each-group. Basically my requirement is that i want to use dynamic grouping. There will be two groups and the upper group and lower group will be selected on the basis of a report parameter.
I hope i made it clear enough. So please help me in this. Any ideas will be highly appreciable.
Thanks and regards
Naveed

You can add a If condition filed after the for-each field
for EG : <?if:ADDRESS_TYPE = 'Employee Address'?>
and then add anothet field which has <?end if?>
Hope this helps.
Thanks,

Transformation issue while using IF condition.

hi everyone,
i am using bpel transformation based on the condition of field using IF condition.
A       B          C          D
10     20          30          40
20     20          30          50
30     30          20          60
40     40          20          70
now i need to apply IF condition in transformation on the filed B. if B = 20 transfer the data to one table or B NE 20 to other table
now my issue is, it is able to differentiate the rows, but the data in the field in second table remains same 20.
as i hope its storing the data in buffer location and writing it. after mapping with the fields in source.
can anyone suggest, how to get the actual value after differentiating the records.

Declare an internal table with two fields lar and another field for seconds.
IF v_lar01 = 'MSTD' and v_vge01 = 'MIN'.
it_time-lar         = lar1
it_time-seconds = t_plpo-vgw01 * 60 " minutes to seconds
else.
it_time-lar         = lar1
it_time-seconds = t_plpo-vgw01 " second
endif.
append it_time.
IF v_lar02 = 'MSTD' and v_vge02= 'MIN'.
it_time-lar         = lar2
it_time-seconds = t_plpo-vgw02 * 60 " minutes to seconds
else.
it_time-lar         = lar2
it_time-seconds = t_plpo-vgw02 " seconds
endif.
append it_time.
and so on...at the end sum it_time-seconds and do the calculate to get hrs n minutes from seconds
Mathews

SAPFM06P - Can this program be used for triggering a Smartform Output??

Hi Experts!
I researched a lot and came to a conclusion that Program SAPFM06P can only be used trigger either a SAP SRIPT Output or a PDF FORM output. It cannot be used to trigger a SMARTFORM output directly as there is no code in it to trigger a SMARTFORM.
My understanding:
I will have to either create an Enhancement to the Program or a Zcopy of SAPFM06P where I need to write the logic in form routine ENTRY_NEU to call a SMARTFORM.
Please tell me if my understanding is correct and please guide me if there is any easier way to achieve the same functionality.
Thanks for help!
Greetings,
Amit

Hi,
U can Copy this standard Program to ZProgram and Insert the FM SSF_FUNCTIONMODULE_NAME and call ur smartform and assign the same combination to the Output type Given to u in NACE Transaction..
This is the Driver Program which I used for PO Smartform
[http://vjkvijaya.blogspot.com/2009/03/puchace-order-smartform-driver-program.html]
Regards,
Vijaya Lakshmi.T

HOW TO USE PERFORM STATEMENT IN SMARTFORMS

Hi,
Can anyone tell me how to use call subroutine in smartform?
Thanks & Regards,
Gauarv.

Hi,
Hope this helps you..
You can use the PERFORM command to call an ABAP subroutine
(form) from
any program, subject to the normal ABAP runtime
authorization
checking. You can use such calls to subroutines for
carrying out
calculations, for obtaining data from the database that is
needed at
display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed
when a
document is formatted for display or printing.
Communication between a
subroutine that you call and the document is by way of
symbols whose
values are set in the subroutine.
The system does not execute the PERFORM command within
SAPscript
replace modules, such as TEXT_SYMBOL_REPLACE or
TEXT_INCLUDE_REPLACE.
The replace modules can only replace symbol values or
resolve include
texts, but not interpret SAPscript control commands.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of
the four
SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must
therefore be
character strings.
The ABAP subroutine called via the command line stated
above must be
defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING...
are now
stored in the internal table IN_TAB . Note that the system
passes the
values as character string to the subroutine, since the
field Feld
VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR
80). See the
example below on how to access the variables.
The internal table OUT_TAB contains names and values of the
CHANGING
parameters in the PERFORM statement. These parameters are
local text
symbols, that is, character fields. See the example below
on how to
return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in
the ABAP
program QCJPERFO is called. Then the simple barcode
contained there
('First page', 'Next page', 'Last page') is printed as
local variable
symbol.

How to use HTML Tags in Smartforms

Hi,
Can you please help me out in knowing how to use HTML tags in Smartforms,
suppose i want to display some text in BOLD i should use the tag as shown
 Header Information 
regards
Ranveer

Hi Ranveer ,
check this following links,
hope this wil helps you
<a href="http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/smartforms/smartform%20in%20abap.pdf">check this link,to know abt HTML in smartforms</a>
rgds,
shan

How to use standard texts in smartforms

Hi Friends,
How to use standard texts in smartforms, ie in scripts we are using standard texts using tr so10.
thanks in advance,
regards,
sharma.

For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
btw SO10 is just for Scriptform, in smartforms we use text module to replace SO10

Problem using a conditional suppress in a cross-tab ?

is there a problem using a conditional suppress in a cross-tab on a row or summarized field in crystal XI?
I am using the following conditional suppress on a summarized field and its rows
         If {@SortCode}=4 then true;
Sortcode is a group sorting formula field
the summarized field is a formula field as well.
All of the summarized fields are suppressed although the cross- tab performs correctly on @Sortcode and the summarized field when not using the condition
it seems to me to be a reporting flow issue although i've included "whileprintingrecords" and "evaluateafter" with no success.
i have also moved the cross-tab from the report header to group header and applied a conditional suppress on the group header through section expert.
this supresses the group i dont want but includes grand totals for each group and also varys the number of columns
i can't filter on sortcode because one of the grand total calculations requires those records and a subreport or second cross-tab does not contain the same number of columns
the cross-tab is necessary as a client may have columns spanning one to many pages
thanks for your help

Hi I have a similar problem,
I have an clock in solution, where i have some dates with data such as, various entries for a date eg, 01/11/2010 1hr, 01/11/2010 3 hrs etc, 03/11/2010 2hrs , 05/11/2010 4.5hrs, 05/11/2010 4 hrs so i need total for each day and highlight only those days, where total is less than 4.5, including days which donu2019t have records eg 02/11/2010 & 04/11/2010, I summarise in totals using a cross tab, to get summarised output for each day as,
            Totals
01/11/2010    4
03/11/2010    2
05/11/2010    8.5
in order to get the dates which didnu2019t have records, i added a dataset from Excel spreadsheet where i just have a sequential dates for the year , and use record selection to select only those dates in range which i need to display, so the result i get
01/11/2010    4
02/11/2010    0
03/11/2010    2
04/11/2010    0
05/11/2010    8.5
so far so good, all using cross tab, now i want to suppress rows which have total > 4.5 so the result should be
01/11/2010    4
02/11/2010    0
03/11/2010    2
04/11/2010    0
How can i do that?

Use Global Conditions when Deploying an Application to a User

Hi,
Use Global Conditions when Deploying an Application to a User:
I would like to deploy App-V Application with User centic in mind. The problem is that when the user login to a specefic typ of desktop the application shall be deployed. But if the use login on there primary device or some other
device with same SLA the Application shall not be deployed.
I think I can use Global Conditions to solve this. I have read about GC and it looks like I could greate a GC rule that deploy the software if the computer is in an AD-group or maybe becas all this computer starts with same prefix, sp maybe
if the computernamn starts with PC the application will get deployed.
The issue is that there is differant SLA on the computers that the User login to.
Or what mor can I do?
/SaiTech

Just keep in mind this puts a load on AD, a Domain Controller can get tickled silly by these Global Conditions running from each of your Clients, depending on the scale of your environment it can have an impact. It's a great idea GC's, just need to consider
what load you are putting on the infra when they run.
Might not be an issue for\to you, worth nothing all the same.
Robert Marshall | This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs

Using if condition in smartforms

Similar Messages

Maybe you are looking for