Using Local Server
This is confusing. When I did the test emails at work they were fine. All emails and form data were sent and received. When I got home and tried the same experiment I got:
Warning: mail() [function.mail]: SMTP server response: 550 Access denied - Invalid HELO name (See RFC2821 4.1.1.1) in C:\xampp\htdocs\newland\messageSent.php on line 2
I checked my page code at home and also at the office and they are identical.
Office Code:
<?
mail('[email protected]','This is the message subject','This is the message body.');
?>
Home Code:
<?
mail('[email protected]','This is the message subject','This is the message body.');
?>
I then checked both PHP.ini files and they’re identical:
Php.ini file from office:
[mail function]
; For Win32 only.
http://php.net/smtp
SMTP = mail.mail.co.uk
http://php.net/smtp-port
smtp_port = 25
; For Win32 only.
http://php.net/sendmail-from
sendmail_from = [email protected]
php.ini at home:
[mail function]
; For Win32 only.
http://php.net/smtp
SMTP = mail.mail.co.uk
http://php.net/smtp-port
smtp_port = 25
; For Win32 only.
http://php.net/sendmail-from
sendmail_from = [email protected]
I can send and receive emails on my computer at home OK. The only difference between my office computer and home computer is the office computer has windows xp professional installed and my home computer has windows 7 home professional.
Anyone help?
You might edit your home php.ini file to reflect this after you make a backup copy of it:
[mail function]
; For Win32 only.
SMTP = localhost
smtp_port = 25
Jim
Edited: Before doing the above, try this if it is applicable:
The issue is due to your email client not configured correctly. Here are some remedy steps.
Double check your email setting to ensure the following settings has been made.
Microsoft Outlook
1. From the Menu Bar, Click Tools then Click E-mail Accounts
2. Select "View or change existing e-mail accounts" then Click "Next"
3. Select your Email account then Click "Change"
4. Click "More settings"
5. Select "Outgoing Server" tab
6. Tick "My outgoing server (SMTP) requires authentication"
7. Select "Use same settings as my incoming email server"
8. Click "Ok"
9. Click "Next"
10. Click "Finish"
Once you have completed the above mentioned steps, close your Outlook and try sending again.
Similar Messages
-
I created a form that I want to distribute and collect responses using a local server. However it is defaulting to distributing and collecting responses using email . Any ideas how to change this?
Hi,
>> I created a form that I want to distribute ...
Alternatively, you could embed the code in to your web page, is this what you are looking for?
Open the form and select Distribute Tab/Embed button and copy the code and paste it in your html web page. You will then have the form embedded into your web page.
>>and collect responses using a local server.
The resonses will be collected via the adobe server. Sorry we do not support collecting responses on a local server.
Hope this helps,
Thanks,
Lucia -
Use local server as gateway for gmail
We use a single email ID for around 15 employees and the same is presently configured on Google apps.
Currently, each of them logs into google apps on their own PCs. I would like to use the Windows Server 2012 R2 that I'm setting up, as a file server, as some sort of gateway which could download mails (like a mirror) from Google's servers and then each employee
can access this local copy through Microsoft Outlook on their PCs. This would result in two benefits.
1. Gmail would not exceed the usage limit and also there would be a local backup of all mails received.
2. Lower consumption of bandwidth.
In the longer run, I can ban gmail access across the network effectively banning access to personal emails at work.To do that you'd need to install an email server on that box, which could then be configured to collect the email from Gmail via POP3 to the server from where your users can collect it over the local network.
Depending on the functionality you required there are a number of email server applications out there, but for full functionality (eg full use of contacts, calendars, mail stored on the server for backups etc) you'd probably need to look at Exchange
Server. Unfortunately MS no longer include Exchange in any of their SBS variants so you'd need to install it separately. Also be aware that if you didn't already have on you'd need to configure your network to be part of a domain, so one of your servers would
need to be a domain controller, and crucially you can't install Exchange Server on the same box as you're running AD, so you'd need at least two servers.
If you simply want to effectively allow your client machines to access their email via POP3 / IMAP like they do now, with no additional functionality than you have at present then a different email solution may be better. There are quite a few options out
there, for instance hMailServer which I've used in the past (though not for your exact situation), so it's just a matter of having a look and finding one which does what you need. -
External programs get error 1006 using local server name
I have a brand new Solution Manager EHP1 installation on Windows 2003sp2/SQL.
The installation succeeded ok, but I cannot configure STMS.
The reason appears to be that external commands (i.e. tp) are not working correctly.
If I execute in SM49 the external command 'ENV' and use the default host, it fails with error 1006
If I specify the target host and use the 'short' name of the host, e.g. SAPSMT it fails with the same error
If I specify the target host and use the fqdn of the host e.g. SAPSMT.saproot.local it works ok.
If I specify the target host as 'localhost' it also works ok.
The 'HOSTNAME' command responds with SAPSMT
There is only a single NIC, so its not anything to do with multiple NICs.
I'm running the latest kernel and sapxpg now and it still acts the same.
Type 3 RFC destinations to SAPSMT work ok.
I can't really get anything else to fail: just external commands with the short name (or default) as the target.
Has anyone seen this before and have a solution or workaround?
I am almost sure it will be a windows configuration problem, but I can't see what it could be.
Thanks, Andy.Hi Pradi,
there are no entries in the HOSTS file related to this.
I do think this is the right area: here is the output of niping, which is suggesting that the address lookup of the ip address goes to the fully qualified domain name rather than the hostname.
E:\usr\sap\SMT\DVEBMGS00\exe>niping -v -H SAPSMT
Hostname/Nodeaddr verification:
===============================
Hostname of local computer: SAPSMT (NiMyHostName)
Lookup of hostname: SAPSMT (NiHostToAddr)
--> IP-Addr.: 10.115.227.36
Lookup of IP-Addr.: 10.115.227.36 (NiAddrToHost)
--> Hostname: SAPSMT.saproot.local
Lookup of hostname: SAPSMT (NiHostToAddr)
--> IP-Addr.: 10.115.227.36
Lookup of IP-Addr.: 10.115.227.36 (NiAddrToHost)
--> Hostname: SAPSMT.saproot.local
If I add the hostname SAPSMT to the hosts file (together with the alias as you suggested), it then gives:
E:\usr\sap\SMT\DVEBMGS00\exe>niping -v -H SAPSMT
Hostname/Nodeaddr verification:
===============================
Hostname of local computer: SAPSMT (NiMyHostName)
Lookup of hostname: SAPSMT (NiHostToAddr)
--> IP-Addr.: 10.115.227.36
Lookup of IP-Addr.: 10.115.227.36 (NiAddrToHost)
--> Hostname: SAPSMT
Lookup of hostname: SAPSMT (NiHostToAddr)
--> IP-Addr.: 10.115.227.36
Lookup of IP-Addr.: 10.115.227.36 (NiAddrToHost)
--> Hostname: SAPSMT
However, having made this change and restarted, I still get the problem.
Thanks for the help, by the way.
Andy -
How to set up local server to use a remote server for login authentication?
Thank you in advance for any help you can offer.
We are trying to set up a "sub-network" (dont' know if this is the right terminology) using a 10.4 Server OS, to manage a set of clients... the trick is that the client login/home directory information is on a different remote server, and shall remain there, for the most part.
To make it easy to understand here's the environment:
*Local Server:* 10.4 G4 Server Quicksilver 1G dual--we have total control of this one
*Main/remote server:* 10.5 Xserve.. don't know which vintage--we have very very very little input on this machine.. effectively at the mercy of the sysadmin of this system who is very conservative in changing anything (hence the need for a separate server to install applications and client machine-specific profiles, etc since the Xserve admin refuses do it). This serves MacBooks/MacBookPros and few iMacs. (no Windows PC.. as that group of comptuers have their own server)
client: ~20 eMacs/iBooks all running 10.4.
use environment: elementary school-->very low network demand (no e-mail, just running local apps linking to server(s) for licensing and login, and some file saving small files on remote server, user preferences, etc).
The remote server (the Xserve) has all the login authentication, as well as the home directories. every school year, the directories get updated as new students enroll and old students graduate. Currently all the clients are directly linked to the Xserve via LDAP while we bring the local server on-line.
the local sever (our G4 Quicksilver) will have few network applications that will support the client machines. We also will be setting up computer accounts and groups for our clients so that we can properly set their environments (the Xserve admin will not do this on the Xserve, so currently all the clients are connecting to the server as a "guest computer" from what little I understand watching what was done)
now, what is the best way to approach this type of set up with minimal "inconvenience" of the Xserve admin?
I am pretty experienced with standalone UNIX and macOS X administration, but a novice to this whole Server and network setup thing. Any suggestions, instructions, pointers to URLs with how-tos is much appreciated. I am not afraid to use Terminal (grew up on UNIX before GUI), etc., and willing to try safe but unconventional setups if that is what's needed...
thanks for any help!Oh never mind.... I figured it out myself helps to read up on the manuals. d'oh. sorry for the bandwidth waste...
-
Hi
If I open example: header.php and insert any photo jpeg/.html ecs i can see the images in the split screen but not in the browser if i save then refresh. I am able to make any change to the code ecs. and they are reflected just fine. I have tried this with my fireworks images .html and when that did not work i tried a strait jpeg off the desktop. This all did not work. I have deleted the local server then step by step created a new one via devnet instruction. This did not work! everything looks fine i even tried in 3 sep browsers with 0 luck....There is no remote server connected at this time because i am making a child theme for my current site. After all changes are done we will the ftp the word press files to site and change.
Ps i even started over from scratch with 0 positive affects....After a lot of pain!!!!!!! the issue is fixed lol After 3 weeks I have overlooked the obvious !!! so the simple fix was the path of the image. Yes i feel stupid 10 years in lol....
Apparently dreamweaver cs 5 will not use the full path when inserting images into the page example: If you drag the image out of your assets folder or however you do it, DW will give you a path like this <img src="images/glass.jpg" width="800" height="729"> This is not the full path and when your pist!!! you cant see things like that ;( so the image path should look like this:
<img src="wp-content/themes/adszoom/images/glass.jpg" width="800" height="729">
also in the html files example of bad then good!
<!--======================== BEGIN COPYING THE HTML HERE ==========================-->
<img name="navigation" src="navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
<map name="m_navigation">
<area shape="poly" coords="804,7,994,7,994,47,804,47,804,7" href="http://adszoom.com/699-2/" title="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" alt="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" >
<area shape="poly" coords="602,8,792,8,792,48,602,48,602,8" href="http://adszoom.com/wp-admin/edit.php/" title="VIEW OR EDIT YOUR CLASSIFIED ADS" alt="VIEW OR EDIT YOUR CLASSIFIED ADS" >
<area shape="poly" coords="405,8,595,8,595,48,405,48,405,8" href="http://adszoom.com/post-an-ad/" title="NEW CLASSIFIED AD POST" alt="NEW CLASSIFIED AD POST" >
<area shape="poly" coords="206,8,396,8,396,48,206,48,206,8" href="http://adszoom.com/help/" title="HELP WITH YOUR CLASSIFIED ADS" alt="HELP WITH YOUR CLASSIFIED ADS" >
<area shape="poly" coords="3,9,193,9,193,49,3,49,3,9" href="http://adszoom.com/" title="HOME VIEW CLASSIFIED ADS" alt="HOME VIEW CLASSIFIED ADS" >
</map>
<!--========================= STOP COPYING THE HTML HERE =========================-->
</body>
NOW THE GOOD!
<!--======================== BEGIN COPYING THE HTML HERE ==========================-->
<img name="navigation" src="wp-content/themes/adszoom/images/navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
<map name="m_navigation">
<area shape="poly" coords="804,7,994,7,994,47,804,47,804,7" href="http://adszoom.com/699-2/" title="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" alt="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" >
<area shape="poly" coords="602,8,792,8,792,48,602,48,602,8" href="http://adszoom.com/wp-admin/edit.php/" title="VIEW OR EDIT YOUR CLASSIFIED ADS" alt="VIEW OR EDIT YOUR CLASSIFIED ADS" >
<area shape="poly" coords="405,8,595,8,595,48,405,48,405,8" href="http://adszoom.com/post-an-ad/" title="NEW CLASSIFIED AD POST" alt="NEW CLASSIFIED AD POST" >
<area shape="poly" coords="206,8,396,8,396,48,206,48,206,8" href="http://adszoom.com/help/" title="HELP WITH YOUR CLASSIFIED ADS" alt="HELP WITH YOUR CLASSIFIED ADS" >
<area shape="poly" coords="3,9,193,9,193,49,3,49,3,9" href="http://adszoom.com/" title="HOME VIEW CLASSIFIED ADS" alt="HOME VIEW CLASSIFIED ADS" >
</map>
<!--========================= STOP COPYING THE HTML HERE =========================-->
</body>
THIS LINE IS YOUR ISSUE
<img name="navigation" src="wp-content/themes/adszoom/images/navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
Ok thanks and if there are any issues with dw please ask: [email protected] -
Using ADS local server on Linux
Hi,
I am using Centos 6.4 and I've installed unixODBC and downloaded and installed the Sybase Advantage ODBC driver for Linux version 11.1. I unpacked and installed the driver (using setup.pl).
I created the following /etc/odbc.ini
; odbc.ini
[ODBC Data Sources]
Odie = Advantage ODBC Driver
[Odie]
Driver=/usr/lib64/libadsodbc.so
DataDirectory=/usr/src
Description=Advantage ODBC driver
DefaultType=FoxPro
ServerTypes=1
I'm trying to access FoxPro DBF files, and I'm wanting to use the Advantage Local Server to do so. I copied a FoxPro free table called test.dbf to /usr/src. The file /usr/lib64/libadsloc.so exists in the same folder as /usr/lib64/libadsodb.so. Then from the command prompt, I ran --
isql Odie -v
And I got the following error --
[root@linuxmysql2 adsodbc-11.10.0.1]# isql Odie -v
[S1000][unixODBC][iAnywhere Solutions][Advantage SQL][ASA] Error 6060: Advantage Database Server not available on specified server. axServerConnect
[ISQL]ERROR: Could not SQLConnect
I understand that the Advantage Local Server for Linux is not a daemon, so there's nothing that's supposed to be running. Given that I configured "ServerTypes=1" and the libadsloc.so file appears to be in the correct place, so I'm sure I'm doing something wrong, but I'm not quite sure what.
Suggestions?
UPDATE :
Upon further investigation, I've figured out how to get past that particular error by creating an /etc/ads.ini and putting in the following --
[SETTINGS]
ADS_SERVER_TYPE=1
But now I'm getting the message I've copied below when trying to run "select * from test". /usr/src/test.dbf exists and is chmod 777 just to simplify things. As you can see in my ODBC setup above, my data directory is /usr/src. This is a free table, and no FoxPro database exists, nor does an Advantage database exist. The same thing works fine on my Windows box.
SQL> select * from test
[S1000][unixODBC][iAnywhere Solutions][Advantage SQL][ASA] Error 7200: AQE Error: State = HY000; NativeError = 5004; [iAnywhere Solutions][Advantage SQL][ASA] Error 5004: Either ACE could not find the specified file, or you do not have sufficient rights to access the file. //linuxmysql2/usr/src/test.adt Table name: test
[ISQL]ERROR: Could not SQLPrepare
UPDATE 2:
I tried specifically indicating the full file name (including .dbf at the end) and I got the following error --
SQL> select * from [test.dbf]
[S1000][unixODBC][iAnywhere Solutions][Advantage SQL][ASA] Error 7200: AQE Error: State = HY000; NativeError = 7016; [iAnywhere Solutions][Advantage SQL][ASA] Error 7016: Corrupt table. Make sure you are not attempting to open a DBF with an ADT table type or vice versa. //linuxmysql2/usr/src/test.dbf Table name: test.dbf
[ISQL]ERROR: Could not SQLPrepare
I've specified the default table type in odbc.ini, but it looks like that may be getting ignored. If I don't specify the table extension, it complains that test.adt doesn't exist. If I do, then it complains that I'm trying to open a DBF as an ADT table, even though I've specified that I want to be opening DBFs.Hi,
I believe that we may have answered this on the Q&A forum. If I recall correctly, you placed the odbc.ini in your local home directory as .odbc.ini and this seemed to resolve the issues.
Edgar -
The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
Hello all,
I have SQL express 2014 advance edition installed ..
and i am connecting SQl server 2008 r2 instance which is in network
while creating datasource in Reportserver which has Express installed ..
got this error ..
please help me how to connect to remote server
Dilip Patil..Error message says it all.
With SQL Express, Data source should be local SQL DB.
With SQL Enterprise, Standard, BI edition, you can create Data soruce which are hosted on other servers.
Please refer similar thread:
https://social.msdn.microsoft.com/Forums/en-US/c0468e3f-bad7-47a7-a695-75c13762280a/the-feature-the-edition-of-reporting-services-that-you-are-using-requires-that-you-use-local-sql?forum=sqlreportingservices
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP] -
Oracle VM 3.1.1 - use local sas on HP DL-580 G5 server
Hi,
I have next question:
I want to now if I can use local sas disk as local repositories on HP DL-580 server ?
The server use this controller: Smart Array P400i Controller.According to HP it should be fully supported.
http://h18004.www1.hp.com/products/servers/linux/hplinuxcert-oracle.html
"HP Tested: Either the OS or hypervisor was successfully installed on the server"
No particular version is specified, however.
With the tension between Oracle and HP lately - it's possible HP drivers were pulled from the latest release - in which case you will have to acquire the correct drivers from HP and install with your host OS installation.
Did some searching on the forums here and turned up nothing specific to your case.
Since I do not have any related hardware in my possession I cannot comment any further. -
"do not use proxy server for local (intranet) addresses" IEM setting
Hi, i would like to find out where can i find the following setting in GPO which used be found in IEM.
"do not use proxy server for local (intranet) addresses" Enabled/Disabled
as currently im setting the IE proxy exception list via GPP, i don't see that option.Hi,
As you notice that when we use GPP Internet Setting item to configure bypass proxy servers, there is no "do not use proxy server for local (intranet) addresses" option in GPP Internet
Setting item. However, as suggested by zanderol24’s reply, we can use bypass proxy server for local addresses option under
Proxy server to achieve the same function.
Best Regards,
Erin -
I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRITry this -> http://support.apple.com/kb/TA38632?viewlocale=en_US
-
Try using IMac as local server
Not sure if this belongs to here ...
I need to set up (but would like to avoid MAMP) a local server environment for web-development purposes and learned that IMac comes with its own Apache and PHP/MySQL.
I tried the last three days (after I got my brand new 27" IMac) to find my way through but I think I am just too new to the IMac family,,, Can anyone please guide me through on how to achieve my goal?
Thanks a lotYou are not in the right forum. You want the Unix forum under Mac OS X Technologies heading of the main forums list and the OS X Server forums. You should also join the Apple Developers forums - registration is free - where you will find helpful documentation and additional forums.
As you have already surmised this is not truly an OS X issue but a Unix one. BTW there are some good books at Amazon.com on OS X Unix. -
Need to copy .txt file from FTP server and downloaded on local server directory.
I need to figure out a way to copy .txt file from ftp server in local server directory using sql jobs.
Below links will help achieving it:
https://www.virtualobjectives.com.au/sqlserver/ftp_scripts.htm
http://www.mssqltips.com/sqlservertip/2884/sql-server-integration-services-ssis-ftp-task-for-data-exchange/ -
I need helping configuring RDP access to my local server from a remote location on my Cisco ASA 5505 Firewall.
I have attempted to configure rdp access but it does not seem to be working for me Could I please ask someone to help me modify my current configuration to allow this? Please do step by step as I could use all the help I could get.
I need to allow the following IP addresses to have RDP access to my server:
66.237.238.193-66.237.238.222
69.195.249.177-69.195.249.190
69.65.80.240-69.65.80.249
My external WAN server info is - 99.89.69.333
The internal IP address of my server is - 192.168.6.2
The other server shows up as 99.89.69.334 but is working fine.
I already added one server for Static route and RDP but when I try to put in same commands it doesnt allow me to for this new one. Please take a look at my configuration file and give me the commands i need in order to put this through. Also please tell me if there are any bad/conflicting entries.
THE FOLLOWING IS MY CONFIGURATION FILE
Also I have modified IP information so that its not the ACTUAL ip info for my server/network etc... lol for security reasons of course
Also the bolded lines are the modifications I made but that arent working.
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password DowJbZ7jrm5Nkm5B encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.6.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 99.89.69.233 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group network EMRMC
network-object 10.1.2.0 255.255.255.0
network-object 192.168.10.0 255.255.255.0
network-object 192.168.11.0 255.255.255.0
network-object 172.16.0.0 255.255.0.0
network-object 192.168.9.0 255.255.255.0
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service GMED tcp
description GMED
port-object eq 3390
object-group service MarsAccess tcp
description MarsAccess
port-object range pcanywhere-data 5632
object-group service MarsFTP tcp
description MarsFTP
port-object range ftp-data ftp
object-group service MarsSupportAppls tcp
description MarsSupportAppls
port-object eq 1972
object-group service MarsUpdatePort tcp
description MarsUpdatePort
port-object eq 7835
object-group service NM1503 tcp
description NM1503
port-object eq 1503
object-group service NM1720 tcp
description NM1720
port-object eq h323
object-group service NM1731 tcp
description NM1731
port-object eq 1731
object-group service NM389 tcp
description NM389
port-object eq ldap
object-group service NM522 tcp
description NM522
port-object eq 522
object-group service SSL tcp
description SSL
port-object eq https
object-group service rdp tcp
port-object eq 3389
access-list outside_1_cryptomap extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.168.6.0 255.255.255.0 object-group EMRMC
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-data
access-list outside_access_in extended permit udp 69.16.158.128 255.255.255.128 host 99.89.69.334 eq pcanywhere-status
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ftp
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq ldap
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq h323
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq telnet
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 eq www
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 host 99.89.69.334 object-group SSL
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM522
access-list outside_access_in extended permit tcp 69.16.158.128 255.255.255.128 192.168.6.0 255.255.255.0 object-group NM1731
access-list outside_access_in extended permit tcp 173.197.144.48 255.255.255.248 host 99.89.69.334 object-group RDP
access-list outside_access_in extended permit tcp any interface outside eq 3389
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333
access-list outside_access_in extended permit tcp host 66.237.238.194 host 99.89.69.333 object-group rdp
access-list outside_access_in extended permit tcp any host 99.89.69.333 object-group rdp
access-list out_in extended permit tcp any host 192.168.6.2 eq 3389
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp 99.89.69.334 3389 192.168.6.1 3389 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 99.89.69.338 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable
http 192.168.6.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 68.156.148.5
crypto map outside_map 1 set transform-set ESP-3DES-MD5
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 1
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
tunnel-group 68.156.148.5 type ipsec-l2l
tunnel-group 68.156.148.5 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:f47dfb2cf91833f0366ff572eafefb1d
: end
ciscoasa(config-network)#Unclear what did not work. In your original post you include said some commands were added but don't work:
static (inside,outside) tcp interface 3389 192.168.6.2 3389 netmask 255.255.255.255
and later you state you add another command that gets an error:
static (inside,outside) tcp 99.89.69.333 3389 192.168.6.2 3389 netmask 255.255.255.255
You also stated that 99.89.69.333 (actually 99.89.69.233, guessing from the rest of your config and other posts) is your WAN IP address.
The first static statement matches Cisco's documentation, which states that a static statement must use the 'interface' directive when you are trying to do static PAT utilizing the IP address of the interface. Since 99.89.69.333 is the assigned IP address of your WAN interface, that may explain why the second statement fails.
Any reason why you are using static PAT (including the port number 3389) instead of just skipping that directive? Static PAT usually makes sense when you need to change the TCP port number. In your example, you are not changing the TCP port 3389.
Maybe you are looking for
-
Double click and single click Event
Hi I want to add a Single Clcik event and Double click event both on the same movie clip in as3 , its working but call both the event same time so how to fix it , please help us if u have any solution ..(
-
I have all of my music on my dad's apple ID (on my Macbook pro and iphone). I want to start using my own apple ID (the one that my iPhone uses for everything except iTunes store) as my iTunes apple ID - how do I do this without losing my old music?
-
Fault message handling in abap client proxy
Hi experts, i have scenario like this SAPECC---XI---WEBservice i was decided to using the ABAP CLIENT proxy in sender side and soap adapter communication in receiver side i will be get the wsdl file form client problem is i am in bit of confusion lik
-
Blob setBytes and setBinaryStream Clarification Needed
I'm writing a JDBC driver for SQL Server and working on the Blob implementation details. One thing that is not clear in the JDBC spec to me at least is the behavior of the call to setBytes and to setBinaryStream on a Blob. Say for a simple example I
-
IDOC to mutiple systems.
Hi Paulie, Yes this can be achieved through enhanced receiver determination. If both the conditions that you provide for the mapping of Service node on the target, the message is send to both the systems. But i think you will need enhanced interface