Using Modem MA034Z with MacBook Pro with Intel Processor

I have just bought the MacBook Pro to replace my old PowerBook G4 but find I no longer have an internal modem (Thanks Apple!! - we dont all send all our time in major metropolises)
I have read a couple of reviews stating the MA034Z apple modem does not work with the Intel processor in the MacBook Pro. Any substantiation?
Can anyone guide me to an external modem that works. I just need simple dial up - no faxing

Welcome to Apple Discussions!
I have the Apple USB Model MA034 external modem which I got when I bought my MBP in September 2007. I have used it for dial up internet ever since, and have had absolutely no issues with it. I use it for dial up both at home and when I travel. It works perfectly.
I find it hard to imagine that Apple would provide a modem that would not work with the MBP. It may be worth reviewing the reviews, and possibly posting a link so that their assertions about the modem can be evaluated.
Good luck!

Similar Messages

  • Using Internet Sharing on Macbook Pro 17" (intel) with the iPhone

    Hi,
    i like to use Internet Sharing on my Macbook Pro 17" (intel) with OS X Leopard.
    Enabling Internet Sharing on Leopard works just fine. I share my Ethernet Connection with the Airport.
    I can connect to the Airport sharing the connection with multiple devices.
    It does however not work with the iPhone.
    The phone can see the network. It even connects and gets its lease (IP Adress / etc)...
    I did open a terminal and did ping the iphone. Doing that i disconnected the iphone from the wifi network and connected again. I found out that immediately after connecting the connection is working (ping reply) for about 2 or 3 seconds and then there is no reply... Sometimes it is working... but 99% of the connections dont work... (working for 2 seconds and then no reply)
    This is only with the Internet Sharing on the Macbook Pro (intel) in combination with the iPhone. I did not have any other wifi problems with the iPhone or with Internet Sharing on my Macbook Pro.
    Regards,
    somi
    Message was edited by: somi

    Hi,
    thank you for your posts!
    Nathan C: Did you notice this issue occurring when you were using Mac OS X 10.4?
    Yes! I did not get it to work with Tiger also.
    mucmac: just solved the issue by setting the channel for airport under Airport Options in sys prefs>sharing>internet sharing from Automatic to a specific channel
    lazarus: Doesn't work for me.
    and not for me
    Richard Cartledge: Maybe it is a Leopard issue?
    I think its a Macbook Pro / iPhone issue. Because other clients work well also the iPhone works on a Powerbook using Internet-Sharing.
    Aaron@SODE: No luck for me! Tried every Channel and every MacBook Pro and MacBook in the company. The only Internet Sharing working is a PowerBook G4 running Leopard 10.5.1. iPhone works with the Powerbook without any problem.
    The same applies to me! I really think it is a problem with the iPhone / Macbook Pro.
    mucmac: what model of macbook Pro do you use? I cant get it to work on a Macbook Pro 17"
    Regards,
    somi

  • I have a newer MacBook Pro with an AMD processor.  It is my understanding that Parallels can only be used on Mac's with Intel Processors.  Is that true and if so does anyone have recommendations about how to have a windows side to my Mac

    I have a newer MacBook Pro with an AMD processor.  It is my understanding that Parallels can only be used on Mac's with Intel Processors.  Is that true and if so does anyone have recommendations about how to have a windows side to my Mac

    Then it either is a pirate clone or you are misinformed.
    Apple Computer has never used AMD processors in its products.
    However, the Graphics Processing Unit (GPU) is a Radeon unit, which is an AMD subsidiary. Parallels, VMWare, VirtualBox will all work fine with the Intel Core i7 or i5 CPU that powers the Mac, and use the AMD Radeon GPU that drives the displays.

  • Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

    Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

    3-D is very memory intensive.
    System requirements | Photoshop
    Mac OS
    Multicore Intel processor with 64-bit support
    Mac OS X v10.7, v10.8, or v10.9
    2 GB of RAM (8 GB recommended)
    3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
    1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
    OpenGL 2.0–capable system
    Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
    ** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
    Bottom line, you don't have enough VRAM
    Nancy O.

  • I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. What can I do?

    I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • How do I get rid of the red and white compass rose used with the rotation tool...from the document? I am using a iMac and Macbook Pro OS Mavericks. CS6 no CC

    how do I get rid of the red and white compass rose used with the rotation tool...from the document? I am using a iMac and Macbook Pro OS Mavericks. CS6 no CC?
    any help appreciated...thank you! V

    I don’t think you can.

  • Can you use the 13-inch MacBook Pro with Retina display straight out of the box, or do you have to charge it first?

    Can you use the 13-inch MacBook Pro with Retina display straight out of the box, or do you have to charge it up fully before you can use it. I do not want to damage the laptop by misusing the battery.

    Attach the charger and start charging the battery to 100%.  The good news is that after you have connected the charger, you may start using the MBP as well.
    Ciao.

  • Every time I use safari on my macbook pro with retina display, only half the page will load then it freezes up?

    Every time I use safari on my macbook pro with retina display, only half the page will load then it freezes up? It's brand new, so I don't understand why it would be doing this?

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • Macbook Pro late 2012 model with intel processor and 4G of RAM.  I upgraded to Yosemite and now my system is so slow.   I do not have a backup to revert to because of insufficient space.  Do I need to upgrade RAM or do I have to reinstall Mtn Lion?

    I have a Macbook Pro late 2012 model with intel processor and 4G of RAM.  I upgraded to Yosemite and now my system is so slow.   I do not have a backup to revert to because of insufficient space. I have ordered a 1T external drive to do a backup now.  What can I do to improve my system performance?   Do I need to upgrade RAM or do I have to reinstall Mtn Lion?

    I have a Macbook Pro late 2012 model with intel processor and 4G of RAM.  I upgraded to Yosemite and now my system is so slow.   I do not have a backup to revert to because of insufficient space. I have ordered a 1T external drive to do a backup now.  What can I do to improve my system performance?   Do I need to upgrade RAM or do I have to reinstall Mtn Lion?

  • Why my safari browser is not opening pdf files?I'm currently using the lat 2013 macbook pro with os mavericks and all my software is uptodate?

    Why my safari browser is not opening pdf files?I'm currently using the lat 2013 macbook pro with os mavericks and all my software is uptodate? 

    Back up all data.
    If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
    Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others — I don't have a complete list.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

    please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

    Found these instructions here:
    https://discussions.apple.com/message/15388885#15388885
    I found an answer that worked for me. I am using an iMac.
    (1) Sign out of the iTunes store
    (2) Open a NEW account with a new Apple ID
    (3) Go through the sign up process and then go to the ACCOUNT INFORMATION page
    (4) Go to RECOMENDATIONS & PING POSTING
    (5) Turn on Genius there
    Once the Genius updates, you can sign out and then sign in under your original Apple ID or the e-mail address you use for the iTunes store. All my store credit was there and now Genius worked.
    Rather odd but I actually like the Genius at times except when it can't deal with some of my lesser known bands that I listen to.
    Worked for me.

  • Anyone have trouble with using Last Pass on macbook pro

    anyone have trouble with using Last Pass on macbook pro
    Also does anyone find that Chrome is super slow on Macbook Pro with OS X 10.9.1??

    nellyfromsalt spring island wrote:
    anyone have trouble with using Last Pass on macbook pro
    why don't you just state what problems you are having?
    nellyfromsalt spring island wrote:
    Also does anyone find that Chrome is super slow on Macbook Pro with OS X 10.9.1??
    No, I use Chrome daily with 10.9.1 and it is still very speedy.

  • I currently use iCloud on a MacBook Pro. I opened my iBook G4 that I haven't used in several years and am unable to access my MobileMe account with many stored emails that I would like to transfer to the MacBook Pro. I have tried all of the passwords.

    I currently use iCloud on a MacBook Pro. I opened my iBook G4 that hasn't been used in years. I have many email messages that i would like to transfer to the MacBook Pro, but every password I use to access MobileMe is not accepted. Any suggestions on retrieving or transferring the emails?

    MobileMe was discontinued around 2 years ago.  Anything on the MMe servers are long gone. The MMe passwords are uselsess because MMe is no more.
    Unless you created an iCloud account back before MMe was taken off line you won't be able to recover any emails. 
    OT

  • Can I get iCloud if I use a MacBookPro with Intel Core Duo (not Core 2). I can't upgrade from 10.6.8 to 10.7 without a Core 2.

    Can I get iCloud if I use a MacBookPro with Intel Core Duo (not Core 2)? I can't upgrade from 10.6.8 to 10.7 without a Core 2.

    Lion (10.7.x) needs Core2Duo.

  • I purchased snow leopard and got a disk with OSX 10.6.3 but my macbook with intel processor and 1 gig won't update.  It restarts but doesn't update after disk installs

    I purchased snow leopard from online macstore in Australia and got a disk with OSX 10.6.3 but my macbook with intel processor and 1 gig won't update from 10.5.8.  It restarts but doesn't update after disk installs.  Do I need 10.6.0 to install first? 

    Insert the Snow Leopard DVD, restart your MacBook while holding down the C key, this should start your Mac from the optical drive instead of your hard drive. Choose your language and install Snow Leopard. When it's done and you've restarted on your new 10.6.3 system run software update to upgrade to 10.6.8. Done.

Maybe you are looking for

  • Why won't my Firefox open with my home page instead of a blank tab?

    The browser always opens in a new tab even when I have it set to open in my home page. When I have Firefox set as my default browser it opens in a new blank tab when I click a link in a document or email. The only time I get my home page on opening F

  • Images in portrait and landscape positioning

    In portrait mode all my images are situated perfectly with text before the image and then text after the image. In one section I only have 4 images. When I switch to landscape mode the images are situated in different positions - not radically differ

  • Plant & Excise Group in Project System Environment

    Dear All, Our scenario involves Project System. Client has projects going on all over the country & overseas. We are creating Plant for all the projects. a) Here is it necessary to create Excise Groups similar to the number of plants? b) Or does it d

  • EDIT pdf fILE

    how do you edit a pdf file?

  • How to overcome thisORA-00060: deadlock detected while waiting for resource

    Hi , I have table name problems(prom_number,prom_relation,prom_impact,prom_prom_number) Now from oracle form raltion can be set. parent and chil relation can be set from the form for ex first suppose row=1 prom_number=1 is set as parent. so the tabl