Using Outlook Web App Web Parts in Exchange Server 2013 - OWA ? Possible?
Using Outlook Web App Web Parts in Exchange Server 2013 - OWA ? Possible?
We recently upgraded from Exchange 2010 to Exchange 2013.
The links that used OWA Web parts have completely stopped working and generate the " :( something went wrong contact your help desk" screen for domain Authenticated users other than myself. The links accessed content of a Shared Account of which
I am an owner and can set the necessary permissions using the Outlook 2013 client.
Using the example from the link provided below we were able to provide calendar access to all authenticated users in our area. The link for calendar still works for me but for noone else. Additionally, all navigation menus are missing when I use this link.
<server>/owa/<SMTP address>/?cmd=contents&module=calendar&view=weekly name
Another crafted link provided web access to our group's task list. This has completely stopped working for anyone including myself. However, when I use "open another mailbox" I am able to navigate to the needed pages.
<server name>/owa/<SMTP address>/?cmd=contents&module=tasks
These links were crafted using advice provided from this provided link.
technet.microsoft.com/en-us/library/bb232199(v=exchg.141).aspx
Is it still possible to use Outlook Web App Web Parts in Exchange Server 2013 - OWA?
Or
Is this a misconfiguration of some sort?
My IT support has given up and closed out the ticket stating that maybe Microsoft will fix this someday...
Hello,
At present, there is no official article to verify whether we can use Outlook Web App Web Parts in Exchange Server 2013. In exchange online, the Outlook Web App Parts is supported.
Cara Chen
TechNet Community Support
Hi, you said this feature is supported in Exchange Online (I understand you're referring to Office 365). Can you please point me to some documentation as I was trying to use it with my E3 account and it doesn't seem to work?
What I'm trying to acomplish is something similar to our old URL (Exchange 2010) in Office 365:
https://ourserver.mydomain.com/owa/[email protected]/?cmd=contents&module=calendar&view=monthly
The best I can do in Office 365 is this:
https://outlook.com/owa/mydomain.com/[email protected]/#path=/calendar
But it's clearly not the same and Office 365 ignores all the information I add to the URL. I would greatly appreciate something in the line of the document referred by 'MarquetteENG' (technet.microsoft.com/en-us/library/bb232199(v=exchg.141).aspx)
Thanks.
Paulo.
Paulo Dias - IT Pro Evangelist
Similar Messages
-
Writing client app to connect to Exchange Server 2013 and set OOF for users on vacation
I am coding an C# app that should connect to Exchange Server 2013 on-premise (Servers Location is not in our Company). I`ve got an account (User and Pass) with readonly admin-rights for now and want to read and set OutOfOffice Objects for other users. I
decide to use EWS Managed API over Autodiscovery but I am bit confuse how
I tried to connect with "service.UseDefaultCredentials = true" and read contacts -> this code works:
try
ExchangeService _service
= new ExchangeService(ExchangeVersion.Exchange2013_SP1);
_service.Credentials
= new WebCredentials("service.exchange",
"1234", "domain");
_service.TraceEnabled
= true;
_service.TraceFlags
= TraceFlags.All; _service.UseDefaultCredentials
= true;
_service.AutodiscoverUrl("[email protected]",
RedirectionUrlValidationCallback);
foreach
(Contact contact in _service.FindItems(WellKnownFolderName.Contacts,
new ItemView(2)))
var test = contact;
catch
(Exception exception)
Console.WriteLine(exception);
After that I tried the same with _service.UseDefaultCredentials = false; got error -> "The Autodiscover service couldn't be located." I am not shure if this "direct log on" is the right way, On msdn I've read about "delegate access"
and "Impersonation" (NTLM and Basic Authentication) I'am a bit confused. Can anybody help me?hi,
when you set a credential, you don't have to set the UseDefaultCredentials property (it is already updated).
For autodiscover, you should try to set the property EnableScpLookup to True if you are in the Exchange domain or it is known by the current domain.
Autodiscover uses a domain query (through Active Directory) and/or a dns query (this requires a DNS register for autodiscover.domain.net) to determine the access to the autodiscover service URI.
Regards,
Désiré GOVIN Refresh IT Solutions -
Exchange Server 2013 OWA Related Issue
Hi everyone,
we installed exchange server 2013 for our new organisation.
Everything works fine except OWA Version, it shows as 2010.
Any suggestion to resolve this issue.
Regards
Kart26Could be that you are still running an early build of Exchange 2013
and are using IE11 - That would load OWA Light that looks exactly the way it did in Exchange 2010.
Resolution: Install Exchange 2013
CU3
or as a workaround, add the domain to the compatibility view in IE.
Martina Miskovic -
I Enable the Project Web App site collection features in Project Server 2013 based on
http://technet.microsoft.com/en-us/library/jj200305.aspx
when i try to create a project i get error "GeneralUnhandledException"
YasserAlso, after you provisioned PWA, are you able to get to the server settings? Did you do any configurations with PWA or using the defaults?
Are you trying to add the project using the FarmAdmin account or did you add yourself as a resource with project manager role?
Cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries -
Exchange Server 2013 System Requirement
Hello all,
I have SBS 2003 installed in our system which runs active directory and exchange server 2003 on the same server hardware,
and I was wandering if I would be able to use active directory from SBS 2003 in Exchange server 2013. In the TechNet website, it only includes Windows server 2003 standard and enterprise edition. Is SBS included in the list?
We will be installing Exchange server 2013 on windows server 2012 on a different server hardware and previous server
will only work as AD and domain controllerI recommend that you post this in the SBS Forum: http://social.technet.microsoft.com/Forums/en/smallbusinessserver/threads
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
Pull POP client web to Exchange Server 2013
Hi, i am new in Microsoft Exchange Server and Email Server Administrator. At present, my company planed to have a Microsoft Exchange Server 2013 and my scope will pull data from the web-client using POP3 to the Exchange. Would you guys give me any solution
and advice for this? Thanks a ton
Sorry for my bad English.Hi,
What’s the exact mean of “pull data from the web-client using POP3 to the Exchange”? Do you mean the Outlook client connects to Exchange 2013 with POP protocol?
If that is the case, please enable and configure the POP in your Exchange server by the following article:
https://technet.microsoft.com/en-us/library/bb124934(v=exchg.150).aspx
Generally, POP3 was designed to support offline mail processing. With POP3, email messages are removed from the server and stored on the local POP3 client unless the client has been set to leave mail on the server. For more information
about POP3 in Exchange 2013, please refer to:
https://technet.microsoft.com/en-us/library/jj657728(v=exchg.150).aspx
Regards,
Winnie Liang
TechNet Community Support -
Exchange Server 2013 OAB Web Distribution Configuration in Exchange 2010 & 2013 Coexistence.
Hi,
We have OAB Issue for Exchange 2010 Users in our Organization.
We have Exchange 2010 and Exchange 2013 Coexistence.While Checking in Exchange Server 2010 Server OAB properties in Org Configuration--> Mailbox-->OAB Properties -->Distribution we are not seeing any CAS servers and Its Grayed Out.
Please let us know How to add Exchange 2010 CAS in Exchange 2013 Web distribution.They made alot changes with the OAB in Exchange 2013, and it doesn't really function in the same manner as it did in 2010. It might be best to take a look at the following blog posts from the Exchange Team, they should give you a better understanding
on how it works and how to manage it going forward.
http://blogs.technet.com/b/exchange/archive/2012/10/26/oab-in-exchange-server-2013.aspx
http://blogs.technet.com/b/exchange/archive/2013/01/14/managing-oab-in-exchange-server-2013.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread -
Exchange server 2013 change to web access url
I have install & configure exchange server 2013 in my local pc. my ip address http://192.168.0.30/ecp but not access http://mail.test.com/ecp. and till i have purchased one mail so till i wants to my mail server access (send and received mail all mail
id public and private) please send configuration url.hi pardeep not sure if i understood well.. you have private IP and you want to do send receive.. is that.. for the test you can do it but almost 90% or more, your mails will be sent to SPAMS.
so if this is a test environment you can give a shot. let me know what kind of config you are looking for. below link will cover the config of exchange 2013. Let me know if you need more help.
www.techieshelp.com/exchange-2013-step-by-step-configuration/
MARK AS USEFUL/ANSWER IF IT DID
Thanks
Happiness Always
Jatin -
Exchange Server 2013 Service Pack Upgrade - Outlook connectivity issue
Hi,
After upgrading to Exchange Server 2013 service pack 1, we are unable to connect via Outlook 2010 or Outlook 2013. Outlook Web Access is working fine though. We have followed all the instructions, and have applied Outlook upgrades, but the issue remain the
same. Outlook was working fine before the upgrade.
Have we missed out something. I would highly appreciate if someone can help out? I'm not sure if this is the known issue as I can't seem to find anything on the internet.
Already applied the transport fix.
Thanks in advance!Hi,
According to your description, your Outlook 2010 and Outlook 2013 come across the connectivity issue.
To narrow down the issue, I’d like to recommend the following troubleshooting:
1. Check if the issue happens on all Outlook users
2. Check the Outlook Anywhere connectivity by using ExRCA:
https://testconnectivity.microsoft.com/
Additionally, MAPI over HTTP is only supported when you use Outlook 2013 sp1 and Exchange 2013 sp1 at the same time. Since the issue also happens on Outlook 2010 client, we can firstly try the above troubleshooting.
If you have any question , please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support -
Mail.app supports accessing to Exchange Server through WebDAV OWA
I have been reading many threads from both here and Microsoft in order to get my mail.app work with my Exchange Server via WebDAV and/ or OWA.
My case is that I am fine with Entourage but not mail.app.
Something a few of us may miss is that Mail.app automatically amend the field "Outlook Web Access Server" to something like mail.myserver.com regardless of what you type, as in most cases the correct address is mail.myserver.com/exchange
So I am digging into my ~/Library/Application Support/Mail and try to find where exactly mail.app store the Account Information but I came out with no luck.
Can someone guide me through where is the setting stored because I think forcefully change that "auto change" Outlook Web Access Server address may well fix the problem many of us face.With 10.5 and Mail 3.0, any luck for this topic?
-
Outlook 2010 Exchange Server 2010 to Exchange Server 2013 Features
Hi All
We have recently upgraded from Exchange Server 2003 to Exchange Server 2010. We are using the Outlook 2010 (32 bit) email client. When mailboxes were moved on to the new server various features inside the system were activated. For email Internal Out of
Office Messages, External Out of Office Messages, notifications in the email recipient bar when creating emails if the user was out of office.
What new features would be available with Outlook 2010 (32 bit) and Exchange 2013. And are they dependent on the Office Service Pack?
Kind Regards
Please note that I have previously posted this in another forum but was advised to post here in this forum.Hi,
I find your post on Office forum:
http://social.technet.microsoft.com/Forums/en-US/fc538968-212c-411c-8ce8-0ef1d7acfcca/outlook-2010-exchange-server-2010-to-exchange-server-2013-features?forum=outlook
The Steve's answer is comprehensive, great links on Exchange 2013 new features and removed features.
About "And are they dependent on the Office Service Pack?", I will give the answer.
Based on my knowledge, when new SP releases, it include enhancements in security and compliance, architecture and administration, and user experiences.
For example, Exchange 2013 SP1, it connects to Outlook 2013 SP1 via MAPI over HTTP.
If you want to know more about the Exchange new features, please see Exchange Team Blog.
Find blog about SP1 for your reference:
http://blogs.technet.com/b/exchange/archive/2014/02/25/exchange-server-2013-service-pack-1-available.aspx
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support -
Outlook 2013 not connect with Exchange server 2013 in internal network
Hello All,
I Have two Exchange server 2013 in our environment. Both server install mailbox and CAS role. After configure exchange server 2013, Outlook 2013 not connect in internal network. I have configure outlook manually. i tried by using the suggestion from blog
but not work. Outlook show that Server cannot connect/ server name could not be resolved. in outlook setting i also put exchange proxy setting. In exchange admin center i have changed the OWA, OAB, Auto discover name. But still not work.
I know that outlook can be connect from external by using ssl certificate and publish outlook anywhere but i did my configure from internal network.
Can you please suggest as soon as possible.
Thanks,
ParvezHi,
Firstly, I’d like to explain, same with external users, internal users use Outlook Anywhere to connect with Exchange server and use Autodiscover get all settings.
Thus, let’s try the following resolutions:
1. run the following command: get-clientaccessservice |fl autodiscoverserviceinternaluri
2. check if the host name in the above URL is in the DNS server and there is a DNS entry about the host name points to the proper IP address.
3. Check if the above host name is in your certificate.
Thanks,
Angela
Angela Shi
TechNet Community Support -
MS Outlook does npo0t connect to the exchange server
My outlook 2010 isn't connecting to Exchange server, what causes this?
It does not connect initially, but occasionally recovers on it's own. No error message, just does not connect. I uninstalled office and reinstalled 2 times. It appears to be working now. They are Microsoft Exchanges. There is not an option to test, there
is however, an option to "repair", but that didn't work.Hi,
Since it's working now, I can't guarantee the real cause of this issue. You mentioned you fixed by reinstalling Office, there might be some damaged components of Outlook that caused the issue. After the reinstallationk, the components were fixed.
Please keep using Outlook, if the problem comes back, post back to let me know.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
if the Microsoft Forefront Protection 2010 for Exchange Server can use for exchange server 2013?
thanks for your reply!
what's protection software can use for exchange server 2013?
Hi,
Most (if not all) of the bigger vendors has a product that supports Exchange 2013, so look them up.
Exchange 2013 has some Anti-Spam and Anti-Malware Protection functionality that you can read about here:
http://technet.microsoft.com/en-us/library/jj150481(v=exchg.150).aspx
Martina Miskovic -
How to get list of Users[MailBoxes] in Exchange Server 2013 by using EWS Managed API
Hi all,
I need list of Users exists in my Exchange server 2013 , i.e Mail Box Users login name.
I was created Full Access permissions of all users to Admin user account, to access each user Mailbox programatically
i need the list of Mailboxes in exchange server .
MailBox mailbox = new MailBox("user");
Please share your ideasHi,
We can run the following command in Exchange Management Shell to get all user mailboxes name and export it to a .csv file:
Get-Mailbox -ResultSize Unlimited | Select Name,Alias,RecipientTypeDetails | Export-Csv c:\Users.csv
If you want to retrieve the list of users by using EWS Managed API, I suggest you can ask a question in Exchange Development forum for more suggestion:
http://social.technet.microsoft.com/Forums/en-US/exchangesvrdevelopment/threads
Regards,
Winnie Liang
TechNet Community Support
Maybe you are looking for
-
Disable form item in oracle apex 3.2
Hi, I am new to oracle apex, please help me from this problem. I'm having form item called "P805_COMP_ID" as text field , i need disable it always, for the same i fallowed some steps with the refrence of the link https://forums.oracle.com/forums/thre
-
Hi All, Can Anyone please answer the following questions regarding standard reports available with OLM and Workforce Intelligence. - Your response will be highly appreciated 1- What are the standard reports available within OLM - i.e reports availabl
-
Again: perfdump and nsfc not working
Hi all, a bit frustrating for you all, but I cannot get perfdump and nsfc working on Windows 2000 with iPlanet 4.1 SP12 (evaluation copy). For both services I get an internal server error (500) if I try to get URL <hostname>/.perf and <hostname>/nsfc
-
Can't drag photo to new slideshow
Running a clean install of Lion and iPhoto 9.1.5 - when I select some photos and do New -> Slideshow, a new slideshow is created but it has no pictures in it. If I try to drag pictures into the new slideshow by dragging the photos over to the left p
-
jpg is locked in preview. In Get Info it is not locked. how to unlock.