Using RSA1GEND Report for transports
Hi,
I did a search on term RSA1GEND and did not get any results. Has anyone had to run this report program to ensure the transport of the generic delta datasource completed successfully?
I am getting an error from the destination system saying that ....
<i>Diagnosis
In PI-Basis Release 2003.1, the generic delta update will also be supported separately from multiple source clients. To make this possible, a report must be executed that carries out the transfer.
This report was not yet executed in your system.
System Response
You can only access the generic delta update again nce you have made the conversion.
Procedure
Execute the report RSA1GEND and check the log. </i>
Thank you
Hi Smith,
This is what the program says it is for.
Conversion of Generic Delta ROOSGENDLT->ROOSGENDLM
Description
This report converts the management table for the generic delta.
For PI 2002.X, it was not yet possible to calculate a generic delta in a multiple client system for each client separately. This is possible after PI 2003.1.
Requirements A precondition for the report is a system with PI 2002.1 or PI 2002.2 for which an upgrade to PI 2003.1 should be performed.
Output After the report has been run the management data for the generic delta have been converted to client-defined tables.
U can run this program from the SE38
Similar Messages
-
Performace Issue using Crystal Report For enterprise and BEx Queries
Hi all;
We are generating the following error stack when trying to build a report on top of a BEX query using Crystal Report for Enterprise :
|7C4F8ECE44034DB897AD88D6F98B028B3|2011 12 12 17:24:21.277|+0100|>>|E| |crj|20380| 56|ModalContext | |2|0|0|0|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|-|-|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|Cut2PbOe3UdzgckPBHn8spEab|||||||||com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
java.lang.AssertionError
at com.businessobjects.foundation.logging.log4j.Log4jLogger.assertTrue(Log4jLogger.java:52)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.newInfoObject(InfoObjects.java:576)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpackHelper(InfoObjects.java:548)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpack(InfoObjects.java:489)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.startUnpack(InfoObjects.java:464)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1484)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1464)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.unpackAll(InternalInfoStore.java:910)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:944)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:929)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query_aroundBody24(InternalInfoStore.java:798)
at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query(InternalInfoStore.java:1)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody20(InfoStore.java:175)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody21$advice(InfoStore.java:42)
at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query(InfoStore.java:1)
at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getConnectionObject(OlapCmsSecuredConnectionService.java:125)
at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getOlapSecuredConnection(OlapCmsSecuredConnectionService.java:191)
at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getOlapConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:83)
at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:60)
at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:193)
at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:176)
at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.provideUniverseFromCms(DirectOlapAccessDataProviderBuilder.java:63)
at com.businessobjects.dsl.services.datasource.impl.AbstractUniverseProvider.provideUniverse(AbstractUniverseProvider.java:41)
at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateQuerySpecDataProvider(AbstractDataProviderBuilder.java:119)
at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateDataProvider(AbstractDataProviderBuilder.java:106)
at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.addDataProvider(AbstractDataProviderBuilder.java:49)
at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:56)
at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:45)
at com.crystaldecisions.reports.dsl.shared.DSLTransientUniverseServiceProvider.createSessionServicesHelper(DSLTransientUniverseServiceProvider.java:72)
at com.crystaldecisions.reports.dsl.shared.DSLServiceProvider.createSessionServices(DSLServiceProvider.java:428)
at com.businessobjects.crystalreports.designer.qpintegration.DSLUtilities.getServiceProvider(DSLUtilities.java:279)
at com.businessobjects.crystalreports.designer.qpintegration.InitializeDSLRunnable.run(InitializeDSLRunnable.java:82)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121)
Here seems to be that a plugin is not loaded : com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
could this affect the performance of Crystal Reports for Enterprise and how could I fix this ?
Best Regards
AnisVenkat,
Thanks for your response. Please note, however, the transaction RAD1 does not exist. Let me provide more details about the current settings of the InfoObject.
The Characteristic is 'Item' (0CS_ITEM) and upon going to RSA1 > Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
When I run/execute the query with this Item characteristic, the results in BEx Analyzer is showing appropriate long text, however, Crystal Report for Enterprise shows short text only
K
Edited by: Kumar Pathak on Feb 3, 2012 6:18 PM -
Problems with concurrency tests using Crystal Reports for VS 2005
Post Author: condeagustin
CA Forum: General Feedback
Hi
My name is Agustin and Im using Crystal Reports for VS 2005
and NET 2.0 to generate pdf files. This is the scenario:
I created a COM+ object in c# and everytime the
COM+ creates an instance of this object, the following flow is executed:
it reads an xml file from a database, then it feeds the report with this
xml file, afterwards it generates a pdf file and finally this pdf file is
inserted into the database. Both fields (xml and pdf fields) are varbinary in the
same table in sql server 2005. All the flow from reading the xml to inserting
the pdf into the database is executed in memory, it never goes to the hard
disk. In other words both the xml and the pdf file are stored in memory (the
RAM). That is the only function of that COM+ object and I already have it in a
production server and it works GREAT!!
The PROBLEM is the concurrency tests. I made the following tests
in the same production server:
1. First I went to the registry and I set the PrintJobLimit to
100 in HKEY_LOCAL_MACHINESOFTWARECrystal Decisions10.2Report Application
ServerServer
2. I shut down the object in the COM+ and I executed 100
threads all at the same time. Each thread created one instance of the object in
the COM+ and the 100 pdfs were generated SUCCESFULLY in 5 minutes!!
3. Then I executed again 100 threads (WITHOUT shutting down the
object in the com+). 10 pdfs were generated succesfully but the rest were
never generated and there was no exception because my object was NEVER
INSTANTIADED in the COM+, I mean, the 90 instances were never created in the
COM+, so my object was never executed, THAT IS MY PROBLEM!! Do I have to
modify something in the registry files of crystal reports to fix this? What can
I do? I have revised the code in that object a LOT OF TIMES and believe me,
everything is being closed and disposed at the end (the memory streams, the
ReportClass objects, the connection to the database, even the dataset used to
store the data of the xml file!
So to sum up the problem is not with the execution of my object
(cause once is created the object works great and the pdf is generated
perfectly!), the problem is with the com+ TRYING to create another instance
of my object given that test scenario. Help me please, What do you
suggest?
The production server has this specifications:
Operative System: Windows Server 2003 Enterprise Edition with Service Pack 2
Processor: Dual Core AMD Opteron 2212 2.00GHz
RAM: 820MB
Hard drive: It is partitioned in 2 drives --> C
drive has 20GB and D has 60GB
Note: Each generated pdf has only one page and if you bring it
to disk its maximum size is 56KB
I hope your answer and thank you
Agustín Conde MartíPost Author: John Werner Enoksen
CA Forum: General Feedback
Hi, im about to write a simular solution where I will use VS2008/Com+ to be in compliance to an existing solition written in VB6.0, so I was googling to look for bumps. Did you figure this one out?
Best regards,
John Werner -
Can you use Crystal Reports for Enterprise to connect to BOE4 over the web?
Hello,
When I use Crystal Reports for Enterprise in BI Launchpad when I am connected on the LAN network it works.
If I connect via the internet, it doesn't.
I wanted to know if Crystal Reports for Enterprise only works if you are connected to Business Enterprise 4.0 on a LAN network and if it's not designed to work remotely, aka via the internet connection, like you can with Webi?
regards
JanettaHello,
We installed BOE4 on the server, it runs perfectly, no issues.
Install Crystal Reports for Enterprise on a laptop. It's the latest one as I checked to see if there's any later versions or patches.
I am able to log into the BOE Enterprise system as administrator.
Namely I have setup the Server connections per the following:
Server Name: <IP address>
The check box for SSL is unchecked.
Server Port Number: nnnn
Server Context: /dswsbobje
System display name: <my server> External Connection
User Name : Administrator
It connects successfully.
I then go and create a report against a Universe that I can see listed on my BOE 4 server.
It then comes up with this error message:
"Unable to Logon: There is a problem logging on to SAP BusinessObjects Enterprise.
Please check your logon credentials and make sure your nework is properly configured before trying again.
If problems persist please contact your Administrator."
Architecture:
BOE 4 sits on Windows 2008 Server SP2
Laptops tried it on are Windows Vista and Windows 2003 Std.
Thanks for looking into this for me.
Edited by: Symonds Janetta on Oct 11, 2011 12:05 AM -
Using Crystal Reports for Ad-Hoc reporting
Is Crystal Reports capable of ad-hoc reporting? If so what of the myriad of products is the minimum that I would need to get started?
There are a few ways to get close to what you need. The easiest way is to use Crystal Reports for Eclipse which is the product that contains an embedded version of the Cystal Reports designer. This would allow users to design and connect the reports to datasources in a similar manner to Crystal Reports. It isn't a fully featured version of CR, more of a basic version. It will allow you to add charts, and you can open an already created template; the connectivity is limited to JDBC, JavaBeans, POJO classes, XML and Web Services.
You can also use the Crystal Report Java SDK to create your own adhoc pages that will allow you to perform the functionality you designer. The API will allow you to do nearly anything you can do within Crystal Reports.
The above downloads are can be obtained freely from the Crystal Reports for Eclipse portal on SDN. To distribute web applications internally, you do not require any additional licenses. To sell your application or to distribute it externally, you require a Developer Advantage license. See this link for more information about that:
http://www.sap.com/solutions/sapbusinessobjects/sme/reporting/eclipse/technicaldetails/index.epx
For more information about the SDK and Embedded Designer, have a look at the Crystal Reports for Eclipse 2.0 Developer Guide AND API reference documentation in the SDK Library, the Business Objects Portal, on http://www.sdn.sap.com . -
Installig and using Crystal Report for reporting on BW
Dear Experts
We are working on BW 7.00 and do't have BO(Business Objects) . Now we wnt to install and Use crystal Report for reporting purpose. Pl. let me know whether Crystal reports can be used to extact data from BW Query or We need to have BO in order to Use Crystal Report.
Thanks in advance
Dinesh SharmaHello Dinesh,
first of all Crystal Reports is not a extraction tool - it is a reporting tool - which is a huge difference.
In regards to products you do need Crystal Reports, SAP Integration Kit, and SAP BusinessObjects Edge or SAP BusinessObjects Enterprise.
Ingo -
Using Crystal Reports for Visual Studio 2008 in C++/CLI
How can I use Crystal Reports for Visual Studio 2008 for creating WinForm Application written in C++/CLI under VS2008 ?
Can you repost your last response in English?
Also, check out this post
Read Before Posting - Where to find Crystal Reports .NET SDK resources
It has links to our Crystal Reports resources for .NET.
Edited by: Jason Everly on Apr 22, 2009 9:07 AM -
Using Crystal Report for VS2010 with target Framework 4 Client Profile
I´m need know if is possible use the Crystal Reports for VS 2010 with the framework 4 client Profile. Exists some posibility?
I need use the WPF Crystal Report Viewer, and the export/print mechanism.
RegardsHi Null,
No it is not, CR requires the full client in all framework versions.
Thank you
Don -
Using Crystal Reports for customers
Hi,
Can you please let me know if customers can use in Crystal reports without VB/C#?
Where can I find samples with crystal reports?
Thanks,
OlgaHi Olga,
>> Can you please let me know if customers can use in Crystal reports without VB/C#?
>> Where can I find samples with crystal reports?
Customers can use crystal reports without having VB/C# installed.
You can find useful information for crystal reports and other business objects (an SAP company) products at the URL: https://boc.sdn.sap.com/product-portal/3
Hope the information is helpful.
Thanks & Regards
Satish -
Using Solution Manger for transports across entire landscape
Hi
I would like to know, is there any option in Solution Manager to use for transports for the entire landscape?
We have around 35+ SAP instances of different releases like ECC6.0, SCM 4.1, and BI 7.0 in our landscape. We also have portal systems in our landscape.
Currently we are doing transports in 3 different ways like for ECC 6.0, we are doing using Dev ECC 6.0 system, for SCM, we are doing from Dev SCM system and for BI system we are doing using Dev BI system.
Is there any option available in Solution Manager to do transports for the entire landscape of different releases?
Regards
SrinivasHello,
I am not sure to understand you but you can describe all your transport route under Solution Manager for all your landscape.
Then you release transport and manage workflow from Solman.
You can do it for Java System with CTS+.
Regards,
Chris -
Report for Transporter Details.
How to create a customize report to capture the transporters details and the quantity supplied and amount of the materials received against the PO. PO includes both the supplier and transporter.
For some clients,I have seen a custom tab set up that captures information about the transporter and the delivery. This tab is triggered while using MIGO and the data is stored in a custom table. This table can contain the list of materials that are captured in the MIGO line items. A report will read the contents of this table and display.
The following thread has information on how to create a new tab.
Re: ADD CUSTOM TAB IN MIGO
Hope this helps.
Regards,
Aroop -
How to use Crystal Report Server with Crystal Reports for Eclipse
Hi,
is it possible to use Crystal Reports for Eclipse with the Crystal Report Server
like i can do it in Crystal Reports.
For Example open a Report file directly from the server edit and save there.
Thanks
ThomasYes, you can use the CR Server product in your Eclipse project. However, you will need to use the RAS SDK in your project instead of the CR4E SDK.
For more information about the RAS SDK, visit the DevLibrary.
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
-MJ -
Hi,
Currently we have cts+ already configured for our portal systems in our landscape through solution manager 7.0.
Recently we had setup a new solution manager 7.1 and need to perform cts+ configuration using this new solution manager 7.1 as we are planning to remove our old solution manager 7.0 very soon.
We are using NWDI system for transporting our portal transports.
Please help me with steps on how to configure cts+ using solution manager 7.1 using NWDI.Hi Naveen,
Please find given below BBPCRM & SAP_BW version..
BBPCRM 500 0013 SAPKU50013 BBPCRM BBP/CRM Supp. Pack.
SAP_BW 701 0003 SAPKW70103 SAP Business Warehouse Component Supp. Pkg.
This problem is not only with Bussiness process tab (T-Code: Solution_manage) also System monitoring Still i searching solution for this But once we are restarting System that time this problem is not occuring but after some time system is giving this DUMP
Regards,
Suresh -
Reporting in SAP HCM using Crystal Reports
We have decided to use Crystal Reports for SAP HCM Objective Settings and Appraisal component.
What will be the best option to access SAP HCM Tables using Crystal Reports?
Regards
FaisalHi,
I have to assume that you've followed the Admin guide and given sufficient Authorizations (as per the detailed list)
Actually, there are quite a few related notes about this, if you search in SDN or via SMP: www.service.sap.com/notes or /x-search . for example:
1334461 - After upgrading SAP R/3 ECC5 to version ECC6, the Integration Kit transport package /Crystal/BC was found in DELETED OBJECTS and Crystal ODBC connection cannot view or browse any tables
1374874 - Cannot see the SAP tables, clusters or functions in Crystal Reports
here's a suggestion:
using the Database Options:
When creating a new report, in the Database Expert window, click on SAP Table, Cluster, or Function
Log on to an SAP system
Once connected, right click on the connection created and select Options
In the Options window, in the Data Explorer area, use the Table name LIKE field to select only a subset of data.
Type the full or partial name of the tables you are looking for
Use the percentage sign (%) to denote any number of characters
Use the underscore (_) to denote one characters
Once done, click OK to accept the change.
Back to the Database Expert window, right click on the connection and select Refresh
Regards,
H -
Report for Req Material and Issue Material for Project/WBS
Dear All,
My client need a report for a WBS element-wise material required and material issue with value.
Let me know if any standard report avialble for same??
Or Incase of devlopment which are the tables we can use to Get req qty and issue qty of materials?
Thanks and Regards,
Atul R. RajmaneDear Shirkant,
Thanks for your input. I am using CN52N report.
I this I have selected Req Qty, Qty Received, Qty Withdrawn, Shortfall Qty. I am getting figures in Req Qty, Qty Withdrawn, Shortfall Qty but I am not able to get Qty Received figure. Let me know how I can get it i.e. for this any Note is required or any other configuration??
If I can get this figure than I can use this report for requirement.
Thanks and Regards,
Atul R. Rajmane
Maybe you are looking for
-
GATP: Unable to check ATP (in GATP) when creating sales order in R/3
Issue: When doing ATP check (sales order) in R/3, I am able to see only availability screen of R/3 and not APO ATP screen. In other words ATP check is performed in R/3 and not in APO (GATP). Simulation ATP check in APO works fine. Environment: AT
-
Mapping-based message splits in PI7.0
We have developed an integration scenario on XI 3.0 that uses mapping-based message splits (1:n transformation without BPM). This is available since SP14 I think. Now we want to upgrade to PI 7.0: Are mapping-based message splits a standard feature o
-
Dates all show up as 5th of month in mail and address book. Why?
In my address book and mail, all dates (birthdays, date received/sent, etc) show up as the 5th of whatever month. In address book, I can see the correct date if I go to "edit" and then click on the date as if I'm going to edit it, but that gets a bit
-
Condition value currency based on amount currency in sales order creation
Hi all, I have a requirement where during creation of a sales order with line items in the conditions tab where if condition type is EDI2 the amount currency should be USDN and accordingly condition value currency should also be changed to USDN
-
Certificates are not listed in Sender Agreement
Hi, I have a message level key pair created on an adpater engine(say, ABC) under a Keystore view of type "USER". On target PI( where i am configuring to recieve the message from a source PI), I have a sender agreement where in i am decrypting the mes