GATP: Unable to check ATP (in GATP) when creating sales order in R/3
Issue:
When doing ATP check (sales order) in R/3, I am able to see only availability screen of R/3 and not APO ATP screen. In other words ATP check is performed in R/3 and not in APO (GATP).
Simulation ATP check in APO works fine.
Environment: ATP is enabled in APO, Relevant ATP categories, ATP groups and master data transferred from R/3 to APO. CIF models to transfer SO data and other master data set up.
Appreciate your inputs.
Hi Madhu,
There can be multiple reasons why it does not go to APO.
Two of the most common overlooked points are:
1. ATP tick in integration model.
2. Activation of ATP in external system: this is done in SPRO in the data transfer section.
Another common point is cheking rule: In SPRO see that your business event(SO) is enabled for ATP check.
Also you can go to transaction CO09 for ATP simulation in R/3 .
Hope it helps. Otherwise you can revert with specific questions.
Regards
Santanu Dawn
Similar Messages
-
User Exit/Badi to change the billing plan date when create sale order
Experts,
Please advise which user exit/badi can be used to change the billing plan date wen create sale order.
My requriement is based on some rules to dynamically change the line item billing plan start date and end date when create sales order.
I tried some user eixt in MV45AFZZ, but the date got revert to the orginal date from billing plan.Hi,
check the include MV45AFZB.
Thanks & Regards,
Sateesh. -
How to save LIST_LINE_ID of Price List when create Sales Order Line
I dont know how save the LIST_LINE_ID of the Price List on Sales Order or anywhere when create Sales Order Line.
I create with the following steps:
Step 1: Create Price List for Item A with two line: Line 1 (Unit Price = 10,5, Pricing Attribute with Tax Classification Code = 5%), Line 2 (Unit Price = 11, Pricing Attribute with Tax Classification Code = 10%)
Step 2: I create Sales Order Line with Item A, Tax Classification Code = 5% --> Unit Selling Price = List Price = 10,5 but dont bookorder
Step 3: I update the Unit Price of Line 1 into 11.55.
Step4 : I book this Sales Order. Howerver, I use form personalization to customize Book Event: if the Unit Price of Item on Price List > Unit Selling Price then cant not Book. But I dont konw List Price of Sales Order belong the line of Price List.
Please help me check this issue. Thanks for your supports.
BinhTC
Email: [email protected]Bob's right - except that if you have OM: List Price Override Privilege set to 'Unlimited' (and from your scenario it sounds as if you have) it is possible that the value in unit_list_price will vary from what was originally retrieved from the price list.
In that case, a safer bet is to use :LINE.original_list_price in your personalization as this will always contain what was originally retrieved and will mean you can avoid any repeat lookup via list_line_id.
Regards,
Jon -
Getting error when creat sales order and Stock Posting
Hi
I have created enterprise structure, xd01, mm01, ovkk but I count't post stock.
When create sales order getting error is that
1.This material is not defined for sales area 1000, 10, 00.
And if i use this T.Code MB1C,
2. Parameters for plant 1000 not maintained in Inventory Mgt.,
*3. Unit *** is not created in language EN.*
Thanks in advanceDear selvi sankaran
1) Compare the sales organization, distribution channel and division of customer and material. In your case, either of that should have been created differently. Maintain the same sales area and retry
2) Go to omi8 and maintain the required parameters to your plant
3) Go to Material Master, select "Additional data" and click on "Descriptions". There maintain "EN" under language.
thanks
G. Lakshmipathi -
To Blank out system default requested delivery date when create Sales Order
Hi Experts,
I am facing a problem when create Sales Order doc copy with reference to a contract.
The create with reference screen under the Contract tab, SAP default with current date as the Requested delivery date.
Is there any way to blank out this default as I need to use the requested delivery data in the contract doc ?
Many Thanks.
Regards,
XavierHi,
Try this--
While defining the Contract sales docment type in VOV8, uncheck the proposed delivery date field in the tab Requested delivery date/ reqested pricing date/reqested prchase order date
I will not propose the system date and leaves the field blank
you can enter the required delivery date.
Hope this will work
regards,
santosh -
ATP check active when creating sales order - want to deactivate
Hello experts,
at the time we created a sales order, the checking group for availability check in the master data of an article was "02" (Individual requirements). However, this was a master data error, as the correct setting for this article is "KP" (No check). We have changed this setting in the article master, but now we have a problem with the delivery, as we can not confirm the required quantity in the desired date. The ATP check says we have no availability (based on the wrong master data existing during the creation of the order), but we need to override this check.
Is ther any way of "overriding" the ATP check of the article in our sales order, thus taking into account the "KP" (no check) setting?
Thank you very much in advance.
Kind regards.
MarcosHave you actually created the delivery yet? If not, you can use the following path to deactivate the ATP check during delivery:
> SPRO
> Logistics Execution
> Availability Check & Transfer of Requirements
> Availability Check
> Determine procedure for Each Delivery Item Category
Perhaps turning of the ATP check temporarily shall help overcome the issue. -
Issue when creating sales order with Sold-to/Ship-to Party's state
Hi All,
we have issue while creating Sales Order with picking up of State tax
for Ship-to-party & Sold-to-party.
<b>When we create a sales order, for the sold to party 140052732 and
ship to party 140052733 it is picking state tax. Which should not
suppose to pick? Because the partner is marked as tax exemption</b>.
Can any body tell me how can we solve this issue!
Why this is happening!
How to make not to pick tax when it is marked for tax exemtion.
As i am not Functional guy i am not aware what is happening here!
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.Hi Deep
What do you mean by "It is picking up state tax"? Does it mean that in the pricing procedure it is picking up a condition type which is meant for state tax?
If so go and check the condition record meant for it. Follow the following steps
1) Go to Sales order
2) Select the line item for which the state tax is being picked.
3) In the condition tab select analysis.
4) In Analysis you shall find the condition type meant for state tax.
5) See which condition record has been found.
6) Go to VK12, enter the state tax condition type and check the condition record for that state tax.
7) If wrong correct it.
8) If anything else come back to the post and inform the details
Thanks
Regards
Sunil -
Issue when creating sales order with Sold-to/Ship-to Party's state tax
Hi All,
we have issue while creating Sales Order with picking up of State tax
for Ship-to-party & Sold-to-party.
<b>When we create a sales order, for the sold to party 140052732 and
ship to party 140052733 it is picking state tax. Which should not
suppose to pick? Because the partner is marked as tax exemption</b>.
Can any body tell me how can we solve this issue!
Why this is happening!
How to make not to pick tax when it is marked for tax exemtion.
As i am not Functional guy i am not aware what is happening here!
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.Hi Deep
What do you mean by "It is picking up state tax"? Does it mean that in the pricing procedure it is picking up a condition type which is meant for state tax?
If so go and check the condition record meant for it. Follow the following steps
1) Go to Sales order
2) Select the line item for which the state tax is being picked.
3) In the condition tab select analysis.
4) In Analysis you shall find the condition type meant for state tax.
5) See which condition record has been found.
6) Go to VK12, enter the state tax condition type and check the condition record for that state tax.
7) If wrong correct it.
8) If anything else come back to the post and inform the details
Thanks
Regards
Sunil -
Multiple events created in R3 when creating sales order
Hi all,
We are having a problem when creating and changing a sales order in CRM.
When a sales order is created and rapidly changed (or changed more than one time) from CRM, backend is receiving 2 events (from BO BUS2032, CREATED and CHANGED) but at the same time (not even a second of difference between them).
So the WF that is linked to that event is triggered twice (we are checking if another WF instance is running, but as this 2 events are generated at the same time, the WF instances didn't notice the other instance).
Do you know if there is a way to solve this problem?
Thanks!Hello
In everyworkflow there is a tab where you define if you want certain event to be triggered. I think it would be enough to de activate this triggering event.
Go to transaction PFTC, enter your workflow ID and choose tab "triggering events". You should have a green light for both BUS2032 -CREATED and CHANGED. Click on the event you want to de activate.
Regards
Joaquin -
Material Determination when creating Sales Order referencing Contract
Hi Experts,
Is ther any way to force material determination when creating a sales order with reference to a contract?
When I create a sales order from scratch, the material determinations works fine, but when the sales order is created referencing a contract, the material is copied from the contract without material determination.
I've checked control copy at item level, without sucess.
Thanks in advance,
Nuno.Hi Nuno,
Material determination is triggered by the material entered in the line item of the sales order.
You can carry out new Material determination/Product selection by copy cotrol configuration when creating with reference.
For your scenario of creating SO with reference to Contract the "product selection field should be blank" at item level copy control.
Blank --> Carry out new product selection
A --> Copy result of product selection
B --> like A, but the product selection is never cancelled afterwards
C --> Reserve
Hope this helps you.
Thanks
Arun -
Getting Error when creating sales order
Hello expert,
When i ma creating sales order In productive environment, not getting any error.
While creating sales order in Quality system The Error is"Order Type ZSOS has not defined in sales area 0201,02.00.
I checked customizing and both the system Quality and Productive system having following configuration and that is identical.
Combine sales Org
Sales Org Ref Sales org
0201 Blank
Combine Distribution Channel
Sales Org D.Channel Ref dist Channel
0201 02 02
Combine Division
Sales org Division Ref Divison
0201 10 00
Assign permitted order type to he sales areas.
Ref Sales org Ref Distribution Ref Division Sales doc type
0201 02 00 ZSOS
Please can anyone assist me where we are missing.
Regards
Ajit jaiswalHi Ajit,
you have to make these assignments in img
Combine sales organizations(ova0)
Combine distribution channels(ovam)
Combine divisions(ovan)
Assign sales order types permitted for sales areas(ovaz)
after these assignments the mentionwed error will be resolved
Revert if helpful
Mohit Singh -
Dump Error when creating sales order
Dear Friends,
When I am creating sales order after entering order quantity field value in item table giving dump error.
INCLUDE LV03VF0B.
INCLUDE LV03VFB4 inside below code trigger error.
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
WA_AVBBD-APOMOBILE
DA_SUBRC
DA_UPDKZ
DA_VVBBD_TABIX
0.Hello Praveen,
checked this program in other systems.
The weird thing in your code is the final parameter 0, it should not be there.
The call should be:
PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
WA_AVBBD-APOMOBILE
DA_SUBRC
DA_UPDKZ
DA_VVBBD_TABIX.
Hope it helps. -
Error: Object type '' could not be generated when creating sales order
Hello Friends,
I am using a SAP standard ITS service to create sales order.
When I am creatin SO, it gives me error Object type '' could not be generated.
Can you plz suggest me what is that issue & how I can reslove it.
Regards,
Narendraany inputs around this plz??
-
PS Project description when creating sales order using BAPI
I am trying to create sales orders using BAPI_SALESORDER_CREATE_FROMDAT2.
Because of the material configuration in table TCN61 the material will trigger a project creation in the project system.
Now, in order to create a project, we must provide the project description.
I would like to ask you if anyone knows how to pass the project description in one of the BAPI parameters.
Thank you for your help.Thank you Sreedhar for the answer.
I tried the CAMPAIGN field but did not work...
In fact, I am not able to find a field, in any of the of the tables, that could hold the project description (PROJ-POST1).
An entry is created in PROJ table when we manually create a sales order for materials specified in table TCN61.
Thanks. -
SD - COPA : CE4* KAUFN is always populated when creating sales order
Hi All,
I am not SD or FICO functional consultant.
So please bear my silly question.
We are using "Account Based Operating Concern".
We have also configured using transaction : KEQ3, that characteristic KAUFN is "NOT USED".
There is no derivation rule for this characteristic KAUFN.
My issue is that everytime i create sales order (transaction : VA01), COPA segment is generated, but along with Sales Order Number (CA4* - KAUFN).
For performance, we do not want Sales Order to be populated in COPA segments.
Is there some configuration that we missed ? Please shed some lights.
Any suggestions are greatly appriciated.
Thanks.Hi Waman,
Thanks for your response.
I notice the KAUFN (Sales Order) characteristic is being populated, by browsing table CE4XXXX_ACCT with PAOBJNR = VBAP-PAOBJNR.
I can see there is value for field KAUFN, which is Sales Order No.
When i generate delivery -> billing/invoice -> Accounting Document, all have the same PAOBJNR as VBAP-PAOBJNR.
This is not expected. I expected CE4XXXX_ACCT-KAUFN to not have any value at all, so the number of records save into CE4XXXX_ACCT should be much lesser. This is suggested by SAP documentation also.
So i am completely lost, which configuration that we missed ?
Any suggestion ?
Maybe you are looking for
-
How to create delivery from a sales order?
Hi friends, Can you tell me how to crete a delivery from a sales order? First, I would like to know which transaction we use to create and how? Appreciate your input. Thanks, Krishen P.S. Points assured for helpful answers and thanks in advance for y
-
Payment to Vendor with Contract Period
HI I want to set the contract period for each vendor in SAP while creating Vendor Master , Payment through F110 should not be allowed if his/her contract expired . Please advise how can i achive this .
-
Hi sapians, We have created scale based info records for material A and vendor B such as: quantity price 0-100 10 per unit 100-200 9 per unit and open a PO for vendor B like : item 1 : material A quantity 50 i
-
I'm creating a bulletin board. Messages are posted through a Coldfusion Form. They are then inserted into a sql database (or should it be a Coldfusion table or datagrid?) The database columns are: MessageID, Subject, Author, Message, NumberOfResponse
-
Filtering assoc rules using subset method.
Hello, Am trying to filter the association rules using subset method of arules package. I have a vector of items that are to be filtered from LHS/RHS. Here is the sample code that i have used. metalAssoc.mod <-ore.odmAssocRules(~.,NBAssocreqOF,case.i