Using SDK in Web Intilligence

Hi All,
I am new to the use of SDKs. Can I use SDK in Web Intelligence.How to call the SDK from Web Intelligence report.Where to start with...
Many Thanks & Regards,
Sandeep

Hi Sandeep,
The SDKs are provided to achieve the functionality that the Designer or Infoview provides. It's kind of achieving the functionality that BOE provided through its user interactive page or panels. So I am not sure what you mean by "use SDK in Web Intelligence".
However the best place to start would be to check [documents|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm] and [samples|https://www.sdn.sap.com/irj/boc/samples].
Regards,
AG.

Similar Messages

  • Promote webi doc fron dev to  qual environnement using SDK

    Hi all,
    I'd like to know if Crystal SDK (.NET ? ...) provide solutions to promote a webi document, for example from Dev to qualification environnement.
    I know I can use Import Wizard for this but "I'd prefer not to"...
    I had a look to APIs available in my BO XI environnement (Windows / 3.1 sp3) like "ExportSDK.dll" or "ExportBIAR" but I couldn't do anything...
    If anyone can tell me :
      1. if it's possible
      2. if yes, little advice to implement the solution
    I would be very grateful !
    Thank's
    David
    Edited by: David Caputo on Jan 5, 2011 10:45 AM

    you can use BIAR APIs ( available in Java only). They can import a BIAR file into a destination BO or export a bunch of documents from a source BO into a BIAR file. So if you must use SDK, you need to first export the webi documents into a BIAR and them import the BIAR into the destination environment.
    Here is a link to sample java code to importexport BIAR:
    Export
    http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/8029fd09-b866-2b10-01a0-e75361290984
    Import
    http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/40d99c86-b866-2b10-5384-8b321e48979b
    Alternately you can use biarengine.jar, a command line tool to perform the same thing.

  • Webi report generation using sdk?

    hi experts,
         Can i create a webi report using SDK. if so, please give me the basic steps.....
    Regards,
    ksvsivam

    Hello ksvsivam,
    You can certainly create webi report from scratch using Report Engine SDK.
    Please go through documentation present at following url:
    http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm  -
    >Report Engine SDK--->Developer Guides--
    >Building and Editing Data Providers 
    Regards,
    Chinmay Athavale

  • How can I parse the document in WebI using sdk?

    I wanna to parse the document in WebIntelligence using sdk. My question is :
    1) By which sdk, I can parse the document.  'Report Application Server SDK' ?
    2) I wanna to parse the 'Self-Defined SQL' and 'Query' components of the document. Can the sdk support this request ?
    My enviroment is  BO XI Release 2.
    Thanks all.

    Hi shao,
    1) By which sdk, I can parse the document. 'Report Application Server SDK' ?
    'Report Application Server SDK' is For Crystal reports so for WebIntelligence or DesktopIntelligence Report it is  "Report Engine SDK".
    Apart from this if you want to do more on these reports "BusinessObjects Enterprise SDK" can be used.
    You can get more information on below link for XI R2.
    http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
    For question 2,
    I am not sure about it but Report Engine SDK provides classes and interface of Data Providers.
    i.e. Building and Editing Data Providers   and  Working with Recordsets.
    Also you can have look on
    Report Engine SDK's
    Interface "Query"
    Hope these helps you.
    Thanks,
    Praveen.

  • Connect to SharePoint web service using the XML / Web Service connector

    Hi experts,
    I am currently trying to display my SharePoint list in Crystal Report. Therefore my plan is to use a SharePoint web service to get the data and paste them to the Crystal Report.
    Is it possible to use the "XML and Web services" connector of the Crystal Reports database expert?
    When I enter the web service URL, for instance:
    https://[url]/_vti_bin/lists.asmx?wsdl
    and click next... I have to enter the web service credentials.
    On the next page I have to enter Service, Port and Method.
    Do I have to enter the service URL again here?
    What If, there is no port? Can I leave that field empty?
    I know the methods, but where can I add the mandatory parameters?
    Thanks for any helps and comments!
    Sebastian

    Hi Ananth,
    thank you, but this document does not help at all.
    We are using Crystal Reports 2008 SP2.
    We want to use the Web Service Connector.
    What I need is more informationen about the Web service connect. For example - the connection in Microsoft InfoPath is much easier - there I don't have to enter a port and can choose the methods from a list.
    Is it possible to use the Crystal web service connector for MS SharePoint Webservices?
    Or must I use the Crystal SDK to carry out a connection?
    Best regards,
    Sebastian

  • How to edit 'uses-sdk' element in manifest settings

    Hi,
    I created an Android App that works perfectly on my HTC Inspire.  It's just three buttons that link to web pages, a browser loads, very basic. I got it to install on 3 android devices, but it doesn't install on a Galaxy Tab and another unknown android device.  Those devices get a Parse Error.
    So I searched around and I found this possible solution from a few days ago:
    http://www.droidforums.net/forum/rescue-squad-help/148308-error-while-installing-android-a pplication-problem-parsing-package.html
    After hours of search, i found a little answer, actually it has every thing to do with the manifest, i changed the minSdkVersion="8" to minSdkVersion="7", and it worek on the first samsung mobile that i found, i have to check with other mobiles, but i think that is the solution!
    I decided that I better figure out how to edit the Manifest, only to find that:
    I found this bit of unsettling information in the Community Help files:
    uses-sdk elementI see there is a checkbox to 'Manually manage premissions and manifest additions in the application descriptor file.' But i'm not sure if I can just add the line
    You cannot include a uses-sdk element.
    <uses-sdk android:minSdkVersion="7" />
    Any work arounds?
    Thanks in advance!
    Tek

    Hi Pooja
    You can find the text in <b>ResourceEditControl**.properties</b> file, which is available under   <i>com.sap.km.cm.ui\lib\km.appl.ui.edit_api\com\sapportals\wcm\control\edit</i>..
    The text is represented by the key <b>txtUploadControl</b>..
    Regards,
    Sandip

  • How to get the Objects which are used in the webi Report.

    Hi Expert,
    I am trying to get the list of  WebI reports and Objects which are present in the report at  BO 4.0.
    I can able to get details  for only the list of reports and universes.
    Could  any one help me to get those details.
    Regards,
    Murali S

    With 4.0, there is no longer a way to do this using just the .NET SDK because the ReportEngine SDK no longer exists for .NET.  Instead, you'll have to look at using the RESTful Web Services SDK for Webi which runs in the Web Application Container Server on your report server (NOT on the web server!)
    RESTful web services are platform-independent and don't require the installation of any SDK files.  Everything is done through standard HTTP Get, Put, and Post commands and the results are returned in either XML or JSON format.  You don't mention which service pack of 4.0 you're on, but the RESTful web services have evolved over the course of the 4.0 service packs, so more recent is definitely better.
    You can find the documentation for this in the "Development Information" section at help.sap.com/bobip40.  There is also a "space" on SCN for this at http://scn.sap.com/community/restful-sdk and there are some links on this page for various resources and sample code.
    -Dell

  • A problem when update DB using SDK

    Hi All,
    I have a web application which uses SAP as a DB to order and display customers info.
    All BPs could change their info online. I use SDK to write to DB
    everything seems to work fine except one thing:
    when I update anything in my web app. after maximum 5 minutes I can't see my pages any more when I try to navigate the browser shows me (Page Couldn't Br Displayed).
    I thought it's because I don't clean my memory and dispose my objects. BUT still I did that and still after updating I always get this, I can't navigate !!
    here is a sample code of my updating function

    Hi Samira,
    Please close the duplicate thread.
    Regards,
    Eric

  • Drill using SDK in BO6.5

    HI,
    i m able to view the report and handle prompts using webIntellingence SDK (using WIBEAN) now i have to drill the report using SDK in Business objects 6.5,
    The format of the report is .rep( Revenue.rep).
    can i use this report for drilling using SDK?or
    are only .wid reports used for drilling purpose?
    if i m using rep format then we should have thin client to perform drill operation if i m right.
    now i want to drill the report using SDK,is this possible for .rep or any other format?

    Hi Vinod,
    Drilling should be possible with full client documents as well as WebI documents.
    Unfortunately, I do not have a sample to share with you.
    However, you can refer the to XI R2 documentation for implementing Drilling:
    http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/RE_SDK/resdk_dg_doc/doc/resdk_java_CustoWebI_dg/ewucw_064.html#1061251
    Please remember that this documentation is for XI R2 and not BO 6.5.
    The most notable difference is that in BO 6.5, the full client document object uses the WIDocument from the WIBEAN SDK.
    However, the concept and most of the method calls are similar (if not the same).
    Hope this helps.
    Regards,
    Dan

  • Same Window Video Preview on Jabber SDK for Web

    Hi,
    I am trying to make a video call with my application, using Jabber SDK for Web. But the local & remote video appears as a separate popup window. I need them to be part of my application window. I am using Chrome v 39.0.2171.95, using 'Cisco web communicator' extension v 3.1.0.36. In debug, i found, in PhoneReadyCallback, remotevideocontainer and localvidcontainer enters the success part. Shall anybody help me here? Even, when i tried the same, with Jabber SDK sample application, it still have that issue.
    Thanks in advance,
    A.Annamalai.

    No softphone functionality is supported in a VDI environment. The release notes state as much:
    Cisco Jabber for Windows can be deployed in virtual environments using Citrix XenDesktop and Citrix XenApp:• Citrix XenDesktop 5.0 or 5.5• Citrix XenApp 5.0, 6.0, and 6.5 Enterprise Edition for Windows 2008 R2 64-bit, published desktopIn a virtual environment Cisco Jabber for Windows supports presence, instant messaging, and desk phone control.
    The only supported route is to use the VXI 6215 thin-client which can register to CUCM directly. This allows the audio and video streams to exit locally at the client and not be backhauled over the ICA connection to the Citrix server.

  • Print a report in crystal Report using SDK

    Hi Dear;
    any body can publish a sample code how can i print a report built in crystal report using SDK?
    regards;

    Hi Dany,
    Hope the following code will help u .
    before calling the function make a XML by using dataset.writexml, in which you have to pass the name of your stored procedure.
    for this you have to decalre commantype as stored procedure.
    first parameter of this is rpt name . asecon paramer is ur xml name which you got from DAtaset.writexml.
    Sub ShowReport(ByVal rptName As String, ByVal SourceXML As String)
            Try
                Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
                Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
                Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
                Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
                Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
                rptDoc.Load(rptPath)
                For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
                    oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                Next
                For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
                    For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
                        If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
                            oSubReport = rptObject
                            rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
                            For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
                                oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                            Next
                        End If
                    Next
                Next
                rptView.ReportSource = rptDoc
                rptView.Show()
                Dim oFrm As New System.Windows.Forms.Form
                rptView.DisplayGroupTree = False
                rptView.Dock = System.Windows.Forms.DockStyle.Fill
                rptView.Location = New System.Drawing.Point(0, 0)
                oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
                oFrm.Controls.Add(rptView)
                oFrm.Name = "rptForm"
                oFrm.Text = "rptForm"
                oFrm.ResumeLayout(False)
                oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
                oFrm.TopMost = True
                oFrm.ShowDialog()
            Catch ex As Exception
                oApplication.MessageBox(ex.Message)
            End Try
        End Sub

  • I am taking courses online and the newer version of firefox 4.0 isn't compatible with the java, which I use on my web page. And I need to go back to the older version of 3.614. How do I reverse to what I had before?

    I need to get another version of firefox other than 4.0. due to the version not compatible or is unknown to the java I'm using on my web for online classes.

    You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
    If you want to go back to 3.6x, you will find it here:
    http://www.mozilla.com/en-US/firefox/all-older.html
    In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side.

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • How can I use OmniPortlet and Web Clipping Portlet?

    How can I use OmniPortlet and Web Clipping Portlet?

    You find information on OmniPortlet and Web Clipping in the Portal Developer's Guide.
    o Building Portlets with OmniPortlet
    o Building Content-Based Portlets with Web Clipping
    Peter

  • How to use Adobe Edge Web Fonts correctly

    I am a Dreamweaver newbie and am trying to learn how to use it through the tutorials. I am stuck at part 3 trying to use Adobe Edge Web Fonts correctly in my web site. As far as I can tell I have followed the instructions in the tutorial correctly, but the font style effect does not show up on my site. I am working on a Windows 7 machine and using Dreamweaver 5.5. I have copied and pasted the javascript into the correct spot in the head of the index.html page as well as included the font-family name in the CSS file and saved the whole smash. The source code for my index page looks exactly like the sample in the tutorial, and I have tried to view my site in my browser, but no dice. Doesn't display the Edge Web Font style in the web page. I believe I've done everything according to the directions, but I suppose I've missed some small detail. Any suggestions greatly appreciated

    You need to add a <script> to the head of your documents like the example below.  In my example, I'm using all of the aguafina-script and league-gothic fonts.
    <!--Edge Font-->
    <script src="//use.edgefonts.net/aguafina-script:n4:all;league-gothic:n4:all.js"></script>
    CSS:
         h1 {
         font-family: league-gothic, sans-serif;
         font-weight:bold;
         color: #639;
         font-size: 250%;
    A simple way to get the correct codes is to go to Adobe Edge Web Fonts and select the font you wish to use.
    https://edgewebfonts.adobe.com/fonts
    NOTE: You won't see the custom web fonts displayed in Design View, Live View or when previewed locally unless you use a local testing server.  An easier way to test is by uploading the page to your remote server.
    Hope this helps,
    Nancy O.

Maybe you are looking for