Using slider for tcp ip

i am using labview to create a tcp ip connection..
in my client i am using a slider, and i want the slider on my server side moving along with the slider on client side..
currently i am stuck in case structure for the slider on server side..
can some one solve it for me??
Attachments:
SHSClient.vi ‏38 KB
SHSServer.vi ‏118 KB

Hello Mahe something that really can help you create this behavior is using shared variables and Front Panel Binding. you just need to bind both sliders to the same variable, and if you move one the other will update, this makes a lot easier to achieve this.
Controlling a Front Panel Control Remotely Using Data Binding - LabVIEW 8.5 Help
http://zone.ni.com/devzone/cda/tut/p/id/4679
Reading and Writing Front Panel Data Using Data Binding - LabVIEW 8.5 Help
Binding Front Panel Controls to Shared Variables - LabVIEW 8.5 Help
http://forums.ni.com/ni/board/message?board.id=6170&thread.id=5942
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

Similar Messages

How do i use ibooks for saving my lecture notes / power point slides please?

Hi, how do I use ibooks for savng / storing my lecture notes on please? (on either a iphone or ipad). Also, can I save powerpoint slides to it too? thanks.

iBooks can only read two formats -- .epub and pdf. So you have to convert your lecture notes or powerpoints to one of those. To do that, check the Save, Export, or Share functions of whatever app you are using to create your notes.

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem?

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]

How to create volume slider for flash cs 5 using action script 2.0?

how to create volume slider for flash cs 5 using action script 2.0?the output should like if user want to hear sound in slow pitch,medium pitch or high pitch(slow to high pitch anything).i have attach this sound to button with using this code:
stop();
mySoundBtn.onRelease = function () {
          mySoundC = new Sound(this);
          mySoundC.attachSound("mySoundClip");
          mySoundC.start(0, 10); //10 represents the number of loops
          gotoAndPlay(2);
This sound plays till 3-4 scene ahead.
Can anyone help me?

Hey thnx Ned.
this sites are really helpful.but,i have used sound through button.so how it is possible to attavh the link with slider.i have created slider also.
Below is my slider code for sound.
onClipEvent (load) {
    mySound1 = new Sound();
    mySound1.loadSound((myScale)+"/"+(myTanpura)+"/"+(myTanpuraSwar)+"/"+(myTanpuraTempo)+".w av", true);
    mySound1.onSoundComplete = function() {
    mySound1.start();
    mySound1.start(0.058,999);
onClipEvent (enterFrame) {
    downloaded = mySound1.getBytesLoaded();
    total = mySound1.getBytesTotal();
    if (downloaded != total) {
        _root.dl = "You have to buy this software...";
    } else {
        complete = 1;
        _root.dl = "";
    mySound1.setVolume(ratio * 2);
This code is working for slider.I mean it scrolls the slider.but it dosent make any effect to sound.
Below is my button code.
stop();
mySoundBtn4.onRelease = function () {
          mySoundC = new Sound(this);
          mySoundC.attachSound("mySoundClip4");
          mySoundC.start(0, 300); //10 represents the number of loops
          gotoAndPlay("play1");
this is on button's frame.not exactly on button.
Button and Slider both are on diffrent scene.
Can you plese help me out?

EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC. It used to show up on left side and I would slide podcasts right over to it for years,

EEEgads, I have used ITUNES for my Ipod Shuffle for years and now it is a nightmare with 11.0, I can't find my Ipod when I connect to Itunes, it is a new Win 7 PC. It used to show up on left side and I would slide podcasts right over to it for years, I have installed 3x with removing old install. I also can hear a constant throbbing sound in spkrs. when Itunes turned on, pls advise.

Hi Becki ..
You need to "authorize" the Mac.
Launch iTunes on the Mac then from the iTunes menu bar top of your screen click Store > Authorize This Computer.
Now, using the same Apple ID as you used to purchased iTunes media originally, you should be able to sync all your content.
More details here > iOS: Syncing with iTunes

So you need to use timeline for a simple slide show?

Do you have to do anything with the timeline to run a simple
looped slide show with no sound. What is a good rate (fps)? I am
desperate. Why does it not advance to the next slide? How do you
reset the program to its original defaults.
Thanks

ngreenhalgh wrote:
> Do you have to do anything with the timeline to run a
simple looped slide show
> with no sound.
Beyond adding your images and animating them...no. But not
sure what you are referring to
specifically when you ask what you have to do with the
timeline - you certainly need the timeline to
animate something over time. Flash will loop by default
unless told to stop.
What is a good rate (fps)?
"good" is relative - depends on your needs - 1 frame rate may
be good for some projects and very bad
for others - depends on how heavy the animation is.
I am desperate.
Desperate for what exactly?
Why does it not
> advance to the next slide?
Impossible to say without looking under the hood - "slide"?
Are you using slides or the main
timeline? We have no idea how your FLA is setup so we can't
possibly troubleshoot it - provide some
specific information or better yet the source file and we
will take a look.
How do you reset the program to its original
> defaults.
Not sure what you mean - default what? Panel layouts? Doc
Properties? Why would this solve your
problem(s)? The only way is to reinstall flash i believe -
why do you need to do this?
> Thanks
>
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com

My macbook running Mavericks is slow. I use it for recording and it is struggling. I am trying to avoid wiping my computer clean and reinstalling everything...

Here is the etrecheck report. Any suggestions of some other maintenance I can perform on my computer? A mac tech did a system diagnostic and found nothing wrong with the hardware. I have already reinstalled Mavericks, so it seems like the next step is wiping the harddrive clean and starting over, but I want to avoid that if possible! Can anybody help?
EtreCheck version: 1.9.15 (52)
Report generated September 2, 2014 at 6:11:15 PM CDT
Hardware Information: ?
    MacBook Pro (13-inch, Mid 2012) (Verified)
    MacBook Pro - model: MacBookPro9,2
    1 2.5 GHz Intel Core i5 CPU: 2 cores
    8 GB RAM
Video Information: ?
    Intel HD Graphics 4000 - VRAM: (null)
        Color LCD 1280 x 800
System Software: ?
    OS X 10.9.4 (13E28) - Uptime: 0 days 0:28:34
Disk Information: ?
    APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) / [Startup]: 499.25 GB (346.45 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    HL-DT-ST DVDRW GS31N
USB Information: ?
    Apple Computer, Inc. IR Receiver
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ?
    Apple Inc. thunderbolt_bus
Gatekeeper: ?
    Mac App Store and identified developers
Kernel Extensions: ?
    [not loaded]    com.focusrite.driver.usb2audio (1.7 - SDK 10.6) Support
    [not loaded]    com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
    [not loaded]    com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
    [not loaded]    com.paceap.kext.pacesupport.panther (5.9 - SDK 10.3) Support
    [loaded]    com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
    [not loaded]    com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
    [not loaded]    com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) Support
    [not loaded]    com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) Support
    [not loaded]    com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) Support
    [not loaded]    com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) Support
    [loaded]    com.waves.driver.soundgrid (2.0.0) Support
Launch Daemons: ?
    [loaded]    com.adobe.fpsaud.plist Support
    [loaded]    com.google.keystone.daemon.plist Support
    [running]    com.paceap.eden.licensed.plist Support
    [running]    com.waves.daemon.SoundGridProtocolService.plist Support
    [loaded]    PACESupport.plist Support
Launch Agents: ?
    [loaded]    com.google.keystone.agent.plist Support
User Launch Agents: ?
    [running]    com.spotify.webhelper.plist Support
User Login Items: ?
    iTunesHelper
Internet Plug-ins: ?
    FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
    Default Browser: Version: 537 - SDK 10.9
    o1dbrowserplugin: Version: 5.4.2.18903 Support
    googletalkbrowserplugin: Version: 5.4.2.18903 Support
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
Safari Extensions: ?
    wrc
    Searchme
    Amazon Shopping Assistant
    Ebay Shopping Assistant
    SlickSavings
Audio Plug-ins: ?
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
    Flash Player Support
    Tuxera NTFS Support
Time Machine: ?
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 464.96 GB Disk used: 142.30 GB
    Destinations:
        TOURO Mobile 3.0 [Local] (Last used)
        Total size: 931.19 GB
        Total number of backups: 2
        Oldest backup: 2014-08-04 21:26:13 +0000
        Last backup: 2014-08-14 23:31:16 +0000
        Size of backup disk: Adequate
            Backup size 931.19 GB > (Disk used 142.30 GB X 3)
    Time Machine details may not be accurate.
    All volumes being backed up may not be listed.
Top Processes by CPU: ?
         4%    SGProtocolService
         2%    firefox
         1%    fontd
         0%    WindowServer
         0%    imagent
Top Processes by Memory: ?
    270 MB    firefox
    106 MB    com.apple.IconServicesAgent
    66 MB    Finder
    41 MB    mds_stores
    33 MB    mds
Virtual Memory Information: ?
    5.92 GB    Free RAM
    1.02 GB    Active RAM
    369 MB    Inactive RAM
    712 MB    Wired RAM
    282 MB    Page-ins
    0 B    Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer? I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer?
I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

Well...I went to the modem (Westell, WireSpeed), found the NAT settings, once again, I'm WAY over my head, I am assuming this is a TCP connection (as opposed to a UDP) and per Lorex my mobile devices will use port 1025. So I gave it a "global port range" of 1-10 and I indicated that the "base host port" was 80, 1025, & 9000 (ports 1,2,3). When I selected the 'enable' it asked for a "host devise" my choices are my IPhone, IMac and the IP address for the dvr, so I choose the dvr. I still cannot connect and canyouseeme still can NOT find these open ports. This is taking up my whole day! I don't know how people figure this stuff out.

DBCA can not use ASM for database storage due to following reason: Could no

Hi
I've a recently installed RAC11gR2(11.2.0.3) on HP-UX
I installed Grid Infrastructure with grid user:
Node1: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
Node2: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
I installed the Oracle Server with oracle user:
Node1: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
Node2: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
All related Grid Infrastructure is functioning well in both nodes:
$ crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE node03
ora.FRA.dg ora....up.type ONLINE ONLINE node03
ora....ER.lsnr ora....er.type ONLINE ONLINE node03
ora....N1.lsnr ora....er.type ONLINE ONLINE node04
ora.asm ora.asm.type ONLINE ONLINE node03
ora.cvu ora.cvu.type ONLINE ONLINE node04
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE node03
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE node03
ora.scan1.vip ora....ip.type ONLINE ONLINE node04
ora....SM1.asm application ONLINE ONLINE node03
ora....03.lsnr application ONLINE ONLINE node03
ora....d03.gsd application OFFLINE OFFLINE
ora....d03.ons application ONLINE ONLINE node03
ora....d03.vip ora....t1.type ONLINE ONLINE node03
ora....SM2.asm application ONLINE ONLINE node04
ora....04.lsnr application ONLINE ONLINE node04
ora....d04.gsd application OFFLINE OFFLINE
ora....d04.ons application ONLINE ONLINE node04
ora....d04.vip ora....t1.type ONLINE ONLINE node04
$
The ASM instance are running well in both nodes
Connected with oracle user, the listener has registered perfectly the ASM instance in each node:
$
$ lsnrctl status
LSNRCTL for HPUX: Version 11.2.0.3.0 - Production on 16-MAY-2012 15:41:06
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for HPUX: Version 11.2.0.3.0 - Production
Start Date 16-MAY-2012 15:24:19
Uptime 0 days 0 hr. 16 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/node03/listener/alert/log .xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.133)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.136)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
The command completed successfully
$
$
DATA & FRA disk group are created:
$
$ echo $ORACLE_SID
+ASM1
$
$ asmcmd
ASMCMD>
ASMCMD> ls -lt
State Type Rebal Name
MOUNTED EXTERN N DATA/
MOUNTED EXTERN N FRA/
ASMCMD>
ASMCMD>
The big issue is... that the DBCA can not see the diskgroups. When I choose ASM Storage it can not see them. It shows the chart in blank and if i try to write the disk group, so the following message appears: can not use ASM for database storage due to following reason: Could not connect to ASM due to following error: ORA-01034 ORACLE not available
What can be passing in this case... ?
Thanks in advance

Thanks both
Really the problem initially was because of this:
[INS-06006] Passwordless SSH connectivity not set up between the following node(s): [node1, node2]. CVU may reports "PRVF-4007 : User equivalence check failed for user "user"" for same error
and I had to install node1 first and after node2 manually and perhaps for this the product was not well linked.
I resolved the problem establishing the keys with the wizard and after copying the following files from node1 to node2
/home/grid/.ssh -------> /home/grid/.ssh
authorized_keys
known_hosts
This is the procedure if you run the wizard at the node1.
The problem is that the wizard creates the keys incompletely...
Thanks

Master slide for MCQ not taking

I modified the Master Slide for "MCQ, T/F, FIB, Sequence" but when I insert a Multiple Choice question, the slide does not include any of the modifications I made to the Master Slide. Am I missing something or is this a bug? Thanks for any insight into this.

Hi, thanks for replying so quickly. I only modified positioning, fonts, and colors. Did not delete anything. One strange thing I noticed is that the mobile slide is perfectly fine. The desktop and tablet views are the ones not accepting the changes to the Master. It's making the font and color changes but the positioning is not working correctly.
Here are screenshots of the Master and Filmstrip of the desktop view. Thanks for any insight.
MASTER SLIDE
FILMSTRIP (I highlighted the slide selector on the right to show that I'm using Sequence, not Sequence2)

How to handle threading for TCP communication?

Hi,
I've a project to control two separate applications (C++ and LabView) and both of them are implemented as server. Another client program (C++) is used to control those application. The communication among them are implemented using TCP socket. The client program sends message to start or stop some tasks on the servers. The client program also sends time (hh:mm:ss) with the start and stop message to determine when to start or stop.
In C++ application (server): The application listens for connection and when gets one, it creates a communication thread to handle that and again listen for another connection. The communication thread handles message passing and when it receives start or stop message, it creates a timer thread with the received time to trigger a task at specified time. And after that it waits for message from the client. So, here, when thread (communication, timer) is needed, it is created.
In LabView (server): I've tried to create same thing as the C++ server. But, from LabView manual and others forum threads, I got that LabView is multithreading and it can be done using independent loop. So, I'd to create four loops in a diagram:
1. Listen for new connection
2. Handle communication for already received connection
3. Start timer
4. Stop timer
and they are run at the beginning of the execution and communication among them are managed using local variables. But, 2,3 and 4th loop can handle only one connection and it can handle another if the current is closed. But, the C++ application can handle more than one connection by creating thread when it is necessary but not at the beginning of the execution of the application.
Is there a better way to implement this in LabView?
Is it possible to handle multiple connections and create diagram node/block (like thread) dynamically like C++?
Thanks.
Using LabVIEW 2010, Visual C#, Visual C++ (2005, 2008, 2010)
Solved!
Go to Solution.

There are several ways to do this in modern LabVIEW and you should probably search the Example Finder for some TCP examples. The classic way is to transfer the connection refnum from the listen loop to a communication loop that adds it to an array of connection IDs and then continously iterates over this array to do the communication. It works since about LabVIEW 4.0 perfectly for me even for applications with HTTP based communication protocol. But you need to make sure of course that the communciation handling for one connection isn't delaying its work for some reasons as that would delay the handling of the other connections too, as they are really worked on sequentially. If you encounter an error, the connection ID is closed and removed from the array.
The other is that you create a VI that does your whole communication and terminates itself on an error or when getting the quit command. Make this VI to be reentrant and then launch it through VI server as reentrant instance, passing it the newly received connection refnum form the listen loop. Then use the Run method to let it start and operate like an independant thread.
For all of these you should be able to find an example in the Example Finder when searching for TCP.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to get the position of the stem in control valve using slider control in the front panel

I have created a calibration program for a control valve. Signal (4-20mA) is generated from labview using slider contorl which is given to the valve via DAQ(module 9265) and again the feedback signal from the valve is acquired using DAQ(module 9203).. . There is an input ISO/ISC(Increasing signal to open/ Increasing signal to close) in the front panel.
ISO would set the output to increase from (4-20)mA further opening the valve
ISC would set the output to increase from (4-20)mA further closing the valve
I have doubt, how can i get the position of a stem

Ravens Fan wrote:
If the position of the stem is being sent to the PC through a 4-20 mA signal into your DAQ 9203 module, then you just need to do an analog input read in order to get the signal.
When reading this post, that is what came to mind... So let's see if both RavensFan & I are trying to understand the same thing... Are you saying that the position of the stem is linear (or scaled) to the amount of current sent to it? Meaning a 4mA signal would move it a certain distance, and 10mA would move another given / known distance? Or are you saying that it is calibrated so that a 20mA signal for a certain duration (ms) would move it a given distance? So the scale would be time and not current unless a lookup table is used to adjust the time duration based on the current being drawn...
It's just that I am not familiar with solenoid / drive devices that related to current.. To voltage, yes. To time, yes.. To current, I'm simply saying that I am not familiar with that. Can you tell us more about this stem (mfg / model designation)?

Editor spot healing brush using slider to adjust size

Is there anyway to make the "slider for size adjustment" more visible when using Editor Spot Healing Brush"?
On my system, the slider bar is black and against the dark gray of the Editor Screen" it makes it very difficlt for me see it.

Try using the square bracket keys on the keyboard.
[ to decrease size
] to increase size

Captivate 5.5 is setting a Mastery Score in the Manifest when using Slide Views

We have encountered a problem with Captivate 5.5 where it is setting the Mastery Score in the manifest to match the Quiz score setting even though we are only using slide views to track completion. This is a problem because if we set the score to zero, our Saba LMS will immediately grant the user credit for the course on the first slide. If we set the score higher than zero, the user will never get credit for the course as Captivate doesn't send a score to the LMS when using slide views to track completion. Our LMS seems to ignore the status passed by the course once the Mastery Score is set. We have compared the manifest behavior in 5.0 and it does NOT set the Mastery Score. We can edit the manifest prior to loading in the LMS but this is a hassle and we'd like to figure out a way to permanently change the behavior to no longer set Mastery Score when using Slide Views to track completion.

Hi,
I believe the easiest way to do this is to edit the manifest.xml file in the Captivate Templates folder. I posted instructions on doing that here: http://forums.adobe.com/thread/956390?tstart=0
Hope this solves your issue. V

I have 4 sets of slides for 4 product lines. I want thave a slide that lists the 4 products, click on which one I wnat and have it go to that set of slides. Is this possible?

I have 4 sets of slides for 4 product lines. I want thave a slide that lists the 4 products, click on which one I wnat and have it go to that set of slides. Is this possible?

Yes, use hyperlinks.

Using slider for tcp ip

Similar Messages

Maybe you are looking for