Using table partioning to get around the Linux ULIMIT
Is this recommended? Or would it defeat the purpose of
partioning.
null
Bob Tribit (guest) wrote:
: Is this recommended? Or would it defeat the purpose of
: partioning.
In what particular way are you trying to get around the 2Gb
filesize limit on 32-bit platforms?
Tablespaces can be made of many separate files, and a table's
extents can be spread in any pattern through a
tablespace. Although it's not particularly neat to have a 10Gb
tablespace made of 5 different files, it's not exactly difficult
to deal with.
Or do you want to import/export your data in neatly-sized
chunks? Suck in 2Gb chunks and exchange them into a partitioned
tabled?
Be aware at, under 8.0 at least, partitioning is a cost-option
(adding roughtly 1/3 to the cost of your base per-user license).
You need to have a good reason to use it.
Romours suggest that it's back to being a complementary feature
in 8i.
null
Similar Messages
-
GPS Use - How do I get around the security
I have two projects. Both don't work due to security restrictions.
One is the media for midi use.
The other uses the GPS in my phone.
This is strictly for personal use.
How do I get around this? Any help would be nice.As far as I know, the only way to go around security restrictions is to have you application sigend by Verisign, Thawte, JavaVerified, etc.
Marc -
Is there a way to get around the pop up, "this device is already associated with an Apple ID. You can download past purchases on this device with just one Apple ID every 90 days. This device can be used with another Apple ID in 13 days."Someonehelp please!
What exactly are you trying to do?
-
Hello,
My sons old iPad 1 is rarely used, but, when i charged it up the message was; "iPad is disabled try again in 22,824,852 minutes" sorry but thats a bit of a wait!
I have gone through all the various reset methods but can't get around the disabled status??
Can't see another way to reset it.
Could it be for the bin.
Only wanted to give the youngest daughter the iPad to take to school.
Hope someone can help
Thanks
Jonny Burns.Is this how you do it?
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
Alter a BAPI Result Table, how to get into the display "loop" ?
Hello all,
i have a problem regarding the result rows of a RFC/BAPI Call.
There are three views, let's say 1,2,3. In View 1, i call a BAPI, and display the results in a table in View 2. I added a button in each row, which calls View 3 and displays some details concerning the selected row.
I now want to store a flag for each row, that has been displayed in this way.
In View 3 i store the key value of the displayed row in an own value node in the context.
When i go back from View 3 to View 2, i want to see that flag (in an extra column) in every row, that has been selected in this session.
So i do not know, how to alter a single row in the BAPI result table, how to get into the "loop" that is used by WD to display the table.
already tried a supply function, but i was not able to alter single rows.
Any suggestions/tips or perhaps code fragments of working supply functions ?
Thank you !Hello,
I'm not sure whether I understood your problem correctly, but I will try to give an answer.
The easiest way I see is to copy the RFC Results to a Component Controller Context structure with an additional Flag field. You can use WDCopyService for copying.
Then on the event of selecting you set your flag as appropriate for you (e.g. if you want to use an image as flag you set the Image path) on the current element of your table. Then display View 3.
On going back View 2 should show now the new flag values...
The trick is to copy the values (as at Time structures can not be expandend with new fields) and set the Flag on the onSelect event.
Hope this helps,
Frank -
I spilled water on my laptop and my "i", "j" and "k" letters don't work on my laptop. However my main problem is that my password contains an "i" so i am locked out of my computer. Any ideas how I can get around the password and login. I tried the method where you go into single user mode and type in commands, however that method uses some of the letters that are not working on my laptop.
You didn't mention which version of OS X your running but there are password reset utilities provided OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support or OS X: Changing or resetting an account password - Apple Support
Alternately you can use an external keyboard to log in and change the password. Make a backup if you don't have one, it's likely that your problems aren't over. If that water continues to migrate downward and fries the logic board your macbook will be toast. -
From which table could i get all the Variants of a ABAP program?
Hi,
From which table could i get all the Variants name which belong to a specific ABAP program?
Thanks.Hi Hoo,
You can get the variants of a ABAB Program from table <b>VARID</b>. Give the report name to the VARID-REPORT field and you will the list of variants for this report under field VARID-VARIANT and VARID-ENAME is the user who created the variant.
Otherwise, You can use the function module RM_GET_VARIANTS_4_REPORT_USER to get the variants of a report
Thanks,
Vinay -
How do i get around the A12E1 error for installing application mgr
how do I get around the A12E1 error
Which operating system are you using? Do you have any other Adobe Creative software installed?
-
How do I get around the "Master Password" window?
Since I'm the only user at this sight, I don't think that I need a Master Password.
So How do I get around the "Master Password" window so I can get some work done?
The Box is not marked, but setup still refuses to go any further.Hi warp4dennis,
Thank you for your question, I understand that you would like to get around the master password dialogue. [[Master Password]] specifically [https://support.mozilla.org/en-US/kb/use-master-password-protect-stored-logins#w_removing-the-master-password how to remove it]
I hope this helps! -
Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.
Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows. -
From which table could i get all the Variants of a specific ABAP program?
Hi,
From which table could i get all the Variants name which belong to a specific ABAP program?
Thanks.Hi,
Check the table starting with TVAR*.
Regards,
Atish -
Living in Dubai where many apps are blocked. How can I get around ? Tried to create a new Id but my billing address in Dubai will not match the criteria for an account in the US. Help please to get around the censorship...thanks
The censorship in regards to certain apps not being available in your country is by your country, not by Apple.
Due to various laws and licensing in each country, in order to have an iTunes store account in a particular country you must have a credit card with a billing address in that country. If this were up to Apple, there would be no such requirement and there would be only one iTunes store for the entire world, but various laws, regulations, and licensing issues in each country, this is required by Apple. -
She has never synced her ipod touch to iTunes, any suggestions of how to get around the password without deleting everything she has on the device? Apple support recommended recovery mode, but doesn't that erase everything on the ipod?
You are out of luck but a Date Recovery company may be able to help if the iPod does not have iOS 8.
If there is an iCloud backup you can restore from that.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I purchased an iPhone5 at an unclaimed items police auction yesterday, but after I charged it and turned it on, it is asking me for the passcode which unfortunately I was not supplied with. Is there a way to get around the code or have I wasted my money?
If the Phone is Running iOS 7... then it has Activation Lock Enabled.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
ShellyfromHunterValley wrote:
... have I wasted my money?
More than likely... I believe ebay has an area where you may be able to sell it for parts. -
My ipad is connected to my wifi, however when i try to sign my ipad into facetime is says that it is having trouble connecting. I use my wifi to get on the internet on my iPad so i have no idea what the problem is. Help Me
- Did it successfully connect to the network before?
- Do other devices successfully connect to the network now?
- Does you iPod successfully connect to other networks?
- Have you reset your iPod?
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Reset network connections: Settings>General>Reset>Reset Network Settings
- Powered off and then back on your router
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
-When you restored you iPod did you restore to factory defaults/new iPod? If not try that.
- If you look at the network properties on the iPod what IP address is assigned when you think you are connected but actually have no internet connection. If it starts with 169 then the iPod never connected to the router, the 169 address are self assigned.
Maybe you are looking for
-
Error: Configuration file /model/common/bc4j.xcfg is not found in the classpath???
Hi Everyone, My Jdev version is 11.1.2.3.0. I have developed one ADF application and was working very fine. But the Jdev got crashed so i re-installed the same version but the application which was running earlier is not working now. I tried by insta
-
PR00 Not editable in Credit Memo Request, when copying from Mile stones
Dear, PROO condition type is not editable in Credit memo request(VA01-CR) when iam creating with ref to Mile stone related invoice. Requirement: Mile stones maintained in Sale order at line item level - >Invoice created with ref to sale order Miles
-
Help! I have problem with instaletion
My OS is Tiger. When i start to instal OS, I press C. When I choose language and when i see error - This programs can't instal to that computer. And i used HD utility. It did't help. What should i do?
-
Hello, we are going to install mySAP ERP 2005 in Q1 2008. I'm an SAP Consultant: MM/PP - R/3, Rel. 4.6C, for 10 years; Inventory Collaboration Hub (ICH) - SAP Netweaver 2004, Rel. 4.1, for 1/2 year. It is absolutely necessary to update my knowledge.
-
Getting Apple support for a corrupted .Mac password
Can someone give me an address at Apple where I can get support that will help me get into my .mac and mac mail accounts? I have called support and visited a Genius Bar but they both say I have to write. I have written e-mails to Apple Support and th