Using template for constrained LM fit

Hi
I am trying to do a constrained Levenberg Marquardt fit. How can I set up the function by using the template ? I attach here the regular LM fit I have, with some (poor) data.
thanks for help ( I read the help file but it is not too clear to me...)
regards
Attachments:
dummyLMfit.vi ‏18 KB

Hello nitad54448,
Thanks for posting on National Instruments Forum.
You can find on the links above some information about the Levenberg-Marquardt functions in LabVIEW.
Introduction to Curve Fitting
What is the Difference between the two Levenberg-Marquadt VIs in LabVIEW
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/

Similar Messages

Pages-when using template for envelopes can you import names/address from address book

When using templates for envelopes can you import names/address from the address book?

Drag the VCard from Address Book onto the open envelope template.
If you want mutiple addresses make a Group of those in Address Book and drag the Group icon onto the Pages template.
Peter

How to use template for Java Servlets?

Any suggestion? thx!

using "Velocity", you can use templates, check out
http://jakarta.apache.org/velocity/

Problem when using template for new database (ora10g)

Hi all,
I've done this a few times now, on different servers weeks apart.
I have an Oracle 10g install on a Windows Server 2003 box, and I have run the database configuration assistant to create a database. We will have several databases with the exact same setup when I move Oracle 10g to a production environment. I created the database exactly as I need it the first time round, then I save it as a template to use for the next ones. However, when I run the template I get the following error:
ORA-01501: CREATE DATABASE failed
ORA-09314: sltln: error translating logical name
Whats driving me nuts is, if I just go ahead and retype everything back in the same as the last database it works fine, just seems to be the template which is messing me up.
Heres the template I'm trying to use (hope just pasting it like this is ok.. if not, please some mod remove it and I'll attach it)
Thanks!
<DatabaseTemplate name="DCnn" description="" version="10.1.0.2.0">
<CommonAttributes>
<option name="ISEARCH" value="false"/>
<option name="OMS" value="false"/>
<option name="JSERVER" value="false"/>
<option name="SPATIAL" value="false"/>
<option name="ODM" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="IMEDIA" value="false"/>
<option name="XDB_PROTOCOLS" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="ORACLE_TEXT" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="SAMPLE_SCHEMA" value="false"/>
<option name="CWMLITE" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="EM_REPOSITORY" value="true">
<tablespace id="SYSAUX"/>
</option>
</CommonAttributes>
<Variables/>
<CustomScripts Execute="false"/>
<InitParamAttributes>
<InitParams>
<initParam name="O7_DICTIONARY_ACCESSIBILITY" value="TRUE"/>
<initParam name="aq_tm_processes" value="1"/>
<initParam name="background_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\bdump"/>
<initParam name="compatible" value="10.1.0.2.0"/>
<initParam name="core_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\cdump"/>
<initParam name="db_block_size" value="8" unit="KB"/>
<initParam name="db_cache_size" value="24" unit="MB"/>
<initParam name="db_create_file_dest" value="E:\Oradata"/>
<initParam name="db_create_online_log_dest_1" value="C:\Oradata"/>
<initParam name="db_create_online_log_dest_2" value="D:\Oradata"/>
<initParam name="db_create_online_log_dest_3" value="E:\Oradata"/>
<initParam name="db_domain" value="JACOBSONCO.COM"/>
<initParam name="db_file_multiblock_read_count" value="16"/>
<initParam name="db_name" value="SDC7"/>
<initParam name="db_recovery_file_dest" value="E:\Oradata\flash_recovery_area"/>
<initParam name="db_recovery_file_dest_size" value="2048" unit="MB"/>
<initParam name="fast_start_mttr_target" value="300"/>
<initParam name="java_pool_size" value="0" unit="MB"/>
<initParam name="job_queue_processes" value="10"/>
<initParam name="large_pool_size" value="8" unit="MB"/>
<initParam name="open_cursors" value="1000"/>
<initParam name="pga_aggregate_target" value="24" unit="MB"/>
<initParam name="processes" value="150"/>
<initParam name="query_rewrite_enabled" value="FALSE"/>
<initParam name="remote_login_passwordfile" value="EXCLUSIVE"/>
<initParam name="shared_pool_size" value="80" unit="MB"/>
<initParam name="sort_area_size" value="524288"/>
<initParam name="undo_management" value="AUTO"/>
<initParam name="undo_retention" value="10800"/>
<initParam name="undo_tablespace" value="UNDOTBS1"/>
<initParam name="user_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\udump"/>
<initParam name="utl_file_dir" value="D:\FileTransfers\Triggers"/>
</InitParams>
<MiscParams>
<databaseType>MULTIPURPOSE</databaseType>
<maxUserConn>20</maxUserConn>
<percentageMemTOSGA>40</percentageMemTOSGA>
<customSGA>true</customSGA>
<characterSet>WE8MSWIN1252</characterSet>
<nationalCharacterSet>AL16UTF16</nationalCharacterSet>
<archiveLogMode>false</archiveLogMode>
<initParamFileName>{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\pfile\init.ora</initParamFileName>
</MiscParams>
<SPfile useSPFile="true">{ORACLE_HOME}\database\spfile{SID}.ora</SPfile>
</InitParamAttributes>
<StorageAttributes>
<ControlfileAttributes id="Controlfile">
<maxDatafiles>100</maxDatafiles>
<maxLogfiles>16</maxLogfiles>
<maxLogMembers>3</maxLogMembers>
<maxLogHistory>1</maxLogHistory>
<maxInstances>8</maxInstances>
<image name="<OMF_CONTROL_0>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_1>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_2>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</ControlfileAttributes>
<DatafileAttributes id="<OMF_DEKINS_DATAFILE_0>">
<tablespace>DEKINS</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">500</size>
<reuse>false</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">-2</increment>
<maxSize unit="KB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_INDEX_DATA_DATAFILE_0>">
<tablespace>INDEX_DATA</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">500</size>
<reuse>false</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">-2</increment>
<maxSize unit="KB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<tablespace>SYSAUX</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">120</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<tablespace>SYSTEM</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">300</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<tablespace>TEMPORARY_DATA</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">200</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">640</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<tablespace>UNDOTBS1</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">200</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">5120</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<tablespace>USER_DATA</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">50</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">1280</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<TablespaceAttributes id="DEKINS">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">-1</initSize>
<increment unit="KB">-1</increment>
<incrementPercent>-1</incrementPercent>
<minExtends>-1</minExtends>
<maxExtends>-2</maxExtends>
<minExtendsSize unit="KB">-1</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_DEKINS_DATAFILE_0>">
<id>1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="INDEX_DATA">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">-1</initSize>
<increment unit="KB">-1</increment>
<incrementPercent>-1</incrementPercent>
<minExtends>-1</minExtends>
<maxExtends>-2</maxExtends>
<minExtendsSize unit="KB">-1</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_INDEX_DATA_DATAFILE_0>">
<id>1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSAUX">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSTEM">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>3</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>-1</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="TEMPORARY_DATA">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>true</temporary>
<defaultTemp>true</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>0</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="UNDOTBS1">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>true</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">512</initSize>
<increment unit="KB">512</increment>
<incrementPercent>50</incrementPercent>
<minExtends>8</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">512</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="USER_DATA">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">128</initSize>
<increment unit="KB">128</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">128</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<RedoLogGroupAttributes id="1">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_1_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="2">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_2_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="3">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_3_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
</StorageAttributes>
</DatabaseTemplate>

You may need to look into this?
ORA-09314: sltln: error translating logical name
Cause: Internal buffer may have overflowed
Action: See OSD error accompanying this message

I do not want to use Templates for email

I have iPhoto 11 (9.4.2) installed on a 13" and 11" Macbook Airs. Sharing pictures using email is different on both. The older 13" transfers the pictures to Mail with only the pictures and uses the standard Mail form. Looks like the Attach version with the airplane at the top laft to send the mail.
The newer 11" uses the templates, with the annoying text formatting floating about and the Templates panel floating over the text in the email.
How can I get the newer, Template enabled, to revert to the standard, nothing fancy format.
I tried to use a method in another thread to delete some caches. but in my Finder view, I do not see my computer or the Library on the 11".
Any suggestions?

Right in front of my eyes, well down at the bottom. Thanks for an easy solution.
Is there a way to get rid of the text formatting box and put the Template box out of the way?
And, if this to be a Mail type program, why have the Send at the bottom right rather than the airplane at the top left? Why not the three coloured buttons as well.
I expect no solution for my interface rant.

Users using Templates for SC creation

Hi
Is there a way in which users can only edit the quantity field when creating SC using public templates.
In our case the users can edit all the fields of the templates created by buyers.
Regards
Ashish

Hi,
Use SHDO tcode, enter your transaction code BBPSC02 go to the screen variant and select BBP_SC, click display/change the different fields avaialble for the shopping cart public template.
Here you will find options to make fields invisible also.
Best regards,
Sridhar.

Problem in Creating Source Files (Templates) for Original Application Files

Dear Friends,
I am trying to ccreate "Source Files (Templates) for Original Application Files" . I checked the link
http://wiki.sdn.sap.com/wiki/display/PLM/Templates-Document+Management
I created a new DOc. type TMP with no statuses, checked in KPO, assigned no. ranges.
Created DIR & assigned the template file, checked into storage category. DIR no. 10000000390 created.
In Workstation application "DOX" in define templates for originals : doc. type: ZGA, application: DOX; language- EN; no - 01; In source doc- entered doc. type- TMP, doc. no.- 10000000390, part & version
Assigned for required source file copy" ZGA doc. type. -- Default Appl. as "DOX" workstation application.
Now created a DIR with ZGA doc. type, when clicking on originals , DOX prompted and clicking on "create with template" . TMP doc. 10000000390 template open in a new window. I edited & saved. close the MS word window. When comes to DIR, it prompted, Original was changed Do you want to save the original?.
clicked on yes.
Saved the ZGA DIR. When I saw the new ZGA DIR created it didn't capture. Where I went wrong ?
Regards,
Sai Krishna

Dear Ravindra,
By going this below link, it seems we can use template for creating ne wdocument & attach the same.
http://wiki.sdn.sap.com/wiki/display/PLM/Templates-Document+Management
Following messages if you read, it may be clear.
By having templates in place we can utilize the pre-defined documents instead creating right from scratch.
Entries can be done in the Template and save the document.
Templates are used for standardization and uniformity. By using templates time consumption for creation of documents will reduce as most of the details are maintained in the master template and the same can be utilize by using the template when creating documents.
If in DMS editing functionality is not there what is the use of templates- documentation?
Regards,
Sai Krishna

Template for documents in KM

Hi,
I am using Templates for documents in KM, EP7 SP13. I have activated the Template Service, uploaded the template files, and assigned the templates for a specific folder.
In fact, I am capable to create new files based on the uploaded templates by Folder -> New -> From Template -> <my template>.
So far, everything is working ok.
My problem arises when I want to save the document based on the template, after I modified it. I want to save it in the same folder I created it (I mean, I want overwrite -or update- the document).
But, instead that, I can only save a local copy, that I have to upload after...
Does anyone know why? Did I forget some config step?
Thanks in advance!
Marcelo

Hi Marcelo,
Did you run through all the steps listed in the documentation?
[http://help.sap.com/saphelp_nw70/helpdata/en/04/be20410e91f523e10000000a155106/frameset.htm]
[http://help.sap.com/saphelp_nw70/helpdata/en/0d/df4d40e2b32571e10000000a155106/frameset.htm]
Regards,
Kosta

How to use one WAD template for all the available queries

Hi,
I have created a WAD template... Now we have close to 25 queries which will use that template for displaying their output at Portal...
Is there any way that i don`t have to create multiple copies of my WAD template...
I.e. all queries would call that same template through portal...

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

How do I create my own favorite template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to templates, which take more memory. I have a large slideshow, and need all the space I can get

First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn. I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.

Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here.

I'm using Word for Mac. Though there are various instructions on the Internet for modifying the templates, none make sense to me. They instruct to do something I can't follow. I change a template but can't save it to the template folder.

What the ****.
OK, I try to change a template using Word for Mac version 14.3.4 2011 edition.
I make a change to the template but am unable to save the darned thing to the template folder; it asks for a file name like it's a new document. I want to change the blasted template but if I can't save it as a modified template, I've accomplished nothing.
Does anyone have a solution?
Thanks

Support for Microsoft Office for Mac

How to use custom aspx page as template for custom content type

Hi,
I have created custom content type and custom aspx page. I want to use aspx page as template for custom content type.
Can anybody please let me know how to accomplish this?
Any help would be appreciated.
Thank you,
AA.

Check if you are looking for the below
http://www.sharepointpals.com/post/How-to-Create-a-Page-Layout-(PageLayout)-with-ContentType-in-SharePoint-2013
Please remember to click 'Mark as Answer' on the answer if it helps you

How to use myself JSP template for my projects

I am using JDev 10. .I realized the default templates of JSP in JDev don't match with my projects so I want to create my own template for JSP Pages. I read some threads in Forum about this problem but I am a beginner, I cannot understand fully and don't know the way to create template nor adding it into Project. Someone can tell me where I can find the tutorials, examples(demo).
Thank you very much.

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

Use of template using CPT1 for charging an additional cost to the product

Hello,
I'm trying to charge an additional cost burden to the cost of my product for every base unit produced. (cost estimate)
I have created a template using transaction CPT1 with sender as Cost Center / Activity Type in environment 001
The activity type is measured in EA (Eaches) while we make our product in boxes (Product base unit of measure is 'Boxes') with say 20 Eaches going into a Box
I have maintained an activity price using transaction KP26 at say $0.55 per Each
I have assigned this template to my costing sheet , valuation area and overhead key using transaction KTPF
When I now cost the material for costing lot size of a 1000 boxes, it still charges the product with the activity price per Each ($0.55) instead of multiplying $0.55*20*1000 = $11,000 for a 1000 boxes
The formula I have chosen in the template against 'Plan quantity ' is in the attachment enclosed:
I need help with doing the right thing within the template to make it give a cost burden of $11000 for every 1000 boxes costed (costing lot size)

Didn't realize that you have to use transaction CPTD to charge template overhead to production orders. That's why it was not working. Now it is posting by reading the confirmed yield. But it is still not converting eaches to boxes using the conversion factor in the material master.
The formula I'm currently using in the template for actual quantity is as under:
OrderYieldConfirmed / AltQtyFactorFromMaterial( AlternativeQuantityUnit
= 'BX', Material = OrderMaterialNumber )
Please tell me what I need to do to the above formula to make it convert boxes to eaches using conversion factor in the material master?
A similar formula has worked beautifully for 'cost estimate'
OrderTotalQuantity / AltQtyFactorFromMaterial( AlternativeQuantityUnit =
'BX', Material = OrderMaterialNumber )

Using a single file as a template for th whole site

My Application.cfm file has the code that i am using as a
template for the rest of my site. On the template, the title
section looks like this. <cfif
IsDefined('pagetitle')><cfoutput><title>#pagetitle#</title></cfoutput><else><title>Welcom e</title>
and the title variable is set on the end page. lets just say
test.cfm but when i view test.cfm the title is always Welcome. How
can i fix this. and this also goes along with my content. On the
application.cfm pge i have empty divs. on the test.cfm page i have
the same divs only with all the page-relevant information in them,
but they never show up. I know that this is how you do it in php.
but how do you do it in ColdFusion

Theres a few things you could do here... none of which I
think is the perfect solution. It all depends on your preference as
well as the needs of your application.
-- Move your page title code to another file - call it
Header.cfm or something along those lines -- and include it in
every page after you set the pagetitle variable.
-- Use Javascript to add the page title to some div at the
top of the page when it loads. (not my favorite option here)
-- Check out the CF tag cfsavecontent. You could save the
generated HTML in test.cfm into a variable and output it later. Put
your pagetitle code in OnRequestEnd.cfm, which is called AFTER
every template is executed. Set your pagetitle variable in test.cfm
and save the HTML into a variable, then in OnRequestEnd.cfm output
the pagetitle followed by your generated content.

Using template for constrained LM fit

Similar Messages

Maybe you are looking for