Using the new Call and Chat buttons

This is really not a Mac issue, even though I use a Mac. It is a general issue regarding the use of the new Call and Chat buttons in web sites and HTML signatures,
I was using the so called "legacy" buttons, both on my home web site as well as in my HTML signature. Sometime a few days ago they stopped working altogether. I checked the Internet and I saw the post that Skype has discontinued their use and insteasd we would have to use the new Call and Chat buttons that work via a generated script.
This is fine, but I am having two issues here:
1) When I include the script on my web site, the Call image always goes on a line by itself. What I want is to have it on the same line with some other social media like images, such as Facebook, LinkedIn, etc. I could do this with the old legacy images but not with this new one.
2) How can I have now this functionality in an HTML signature? I can't put a script there.
Thanks for any help!
George

As far as I know, you can't change it: first, your photo is probably a .jpg and iMovie will be adapting it to a video file which will result in somewhat of a loss of quality and second, if your original picture is small, it cannot be enlarged without significant loss of quality as it will get blurry while the individual pixels are being made larger - that depends on your camera settings and its photo output size. So it could be either or both of those that is the problem here. Check your camera and see what size you are taking your pictures in.

Similar Messages

HELP! My old mac was requested to upgrade Firefox to 14.0.1. After the sucessfully installation, I received a message saying my old Mac couldn't use the new Firefox and Safari crashes. I have NO browser now!!!

My old mac was requested to upgrade Firefox to 14.0.1. After the sucessfully installation, I received a message saying my old Mac couldn't use the new Firefox and Safari crashes. I have NO browser now! Any help would be appreciated.

Hmmm... So you upgraded Firefox and now neither Firefox or Safari will work? Very weird. I have no idea what might have gone wrong. That said, when things start acting wierd, I always try a bit of maintenance first. About 95% of the time, I luck out and it works.
I use the free program Onyx. I run all the clean up routines. Then I boot to the recovery partition (Lion) or the OS X Install Disc and repair permissions and verify/repair the hard disk.
Hope this helps.

I have Iphone 4s, and the phone will activate itself again. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? I would like an answer as soon as possible ... Thank you very much.

I have Iphone 4s, and the phone will activate itself again. This I have verified, but when I shall put this onto my phone, so the phone will not approve the newusername and password. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? Silly to buy a new phone just for this .... The phone is almost three years old. How long can weexpect this to last? I would like an answer as soon as possible ... Thank you very much.

It sounds like your device might be in Activation Lock. Is it asking your to enter in an Apple ID & password, but only showing you the first letter of the email address and then some dots? Example: j•••••@icloud.com?
If so, do you recognize that email? Do you have an Apple ID that fits the same format? If so, then go to www.cloud.com, log in with that Apple ID & password, and see if under Find My iPhone it shows this device. If so, turn off the device, then remove the device from the list.

I had to return my first Ipad2, and now the new won't connect to itunes. I verified I had the latest itunes, used the new cable and verified the port worked by syncing with my ipod, I reloaded 10.2.2 and restarted my PC. Still won't work - thoughts?

I had to return my first IPad2, and now the new one won't connect to iTunes. I verified I had the latest version, used the new cable and verified the port worked by syncing with my iPod, I reloaded 10.2.2 and restarted my PC. Still won't work - thoughts?

Sorry - found a couple of good threads right after posting.

My computer now has the 'new scan' and 'accept' buttons on top right corner & does not scan

my computer crashed. I re-installed my PSC 1510 drivers( updated from the HP web site) and when I hit the scan button, the 'new scan' and 'accept' icon appear in the top right corner of my monitor(they use to be on the bottom right corner) and the scanner does not respond. Even if I hit the new scan button, nothing happens. Any ideas what to try next? Thanks

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'

Hi,
I am using SCOM 2012 SP1
I have recently been experiencing an issue when trying to create a new dashboard using the wizard. I get to the step where you select a group or object to add to the Scope and Counters section. When I try to search for a particular object such as a
port or interface it times out and returns an error. The error is shown below:
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not
produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer
Support Services for more information.
   at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
   at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String
languageCode, InstanceQueryOptions instanceQueryOptions)
   at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
   at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
String typeWithIconPropertyName, Boolean propertyCollectionRequested)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
   at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
It appears to be complaining about internal resources, but we have not experienced this issue before and both the management and SQL servers have plenty of resource. The databases are held on a seperate dedicated sql server and I have noticed that when I
try to search for the object, the sqlservr.exe process immediately consumes 50% CPU while the query is running. As soon as it ends (errors) the sqlservr process drops back to a reasonable number.
No changes have been made to either the management server or sql server. We were able to create dashboards one day, but then recieved this error the next.
Has anyone else seen this issue? or can anyone explain what is happening?
Many thanks

Hi,
Asposted earlier,hadt he same problem
when creating a Dashboard widget type
State.
Ones olution I found for this was as follows:
When creating the State widget,the option
to specify the criterion I left blank
and finished the creation of the dashboard.
With that managed to solve the problem.Of course this
is not the solution, or the root cause
of the problem.
I will examine more about this issue, and sohave
the ultimate solution and why such behavior,I post
here.
thank you
Wilsterman Fernandes

HT5622 I cannot get my new Apple ID to show up on iCloud! I've signed out and back in using the new id and even turned my iPad completely off and on. Nothing works. Help!

I cannot get my newly changed Apple ID to change in I cloud on my iPad. I have signed out and back in with my new id and have turned off my iPad completely and back on....it's still showing up with the old user name in iCloud. Help!

Go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

What happened to the end call and answer button

When you are on a call and someone else calls in, there used to be an option for end call adn answer. Now there is ignore, hold call and answer, end, send message and some other option, but no "end call and answer". Any help??

This seems to be GSM (AT&T) vs CDMA (Verizon) issue, not an Apple h/w or iOS issue.
Here is a link that sheds some light on it: https://discussions.apple.com/thread/2753071?start=0&tstart=0
Another link with some tips: http://forums.macrumors.com/showthread.php?t=1317331
I used to be w/ AT&T, and recently switched to Verizon for LTE+iP5, and lack of this option (end call and answer) drives me nuts. But, one learns to live with it, until someone at Verizon decided to do something about it.
Message was edited by: moemann

How do you get an updated Apple ID to change on your iPhone? I've changed logged in using the new ID and password but when I go to synch my apps, it reverts back to the old ID

I've changed my Apple ID on iTunes and my MacBook Pro, iPhone, and iPad. When I try to update my apps on my iPhone, it reverts to the old Apple ID

It sounds like your device might be in Activation Lock. Is it asking your to enter in an Apple ID & password, but only showing you the first letter of the email address and then some dots? Example: j•••••@icloud.com?
If so, do you recognize that email? Do you have an Apple ID that fits the same format? If so, then go to www.cloud.com, log in with that Apple ID & password, and see if under Find My iPhone it shows this device. If so, turn off the device, then remove the device from the list.

When I attempt to updates apps on my ipad my password does not work. I tried updating them one at a time and it still doesn't work. I've reset my password and I can use the new password and update apps on my PC but not on my ipad. Why?

When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad. Why?

Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

Using the new iMovie and importing pictures from iPhoto, why are some of my pictures blurry?

I Know this topic has been discussed before, but I couldn't find anything recent about this. I have iMovie opened & I'm putting the pictures in. In iPhoto the pictures are clear, but when moved to iMovie, become blurry. I know it has to do with the resolution of the picture but I can't find where to change it at

As far as I know, you can't change it: first, your photo is probably a .jpg and iMovie will be adapting it to a video file which will result in somewhat of a loss of quality and second, if your original picture is small, it cannot be enlarged without significant loss of quality as it will get blurry while the individual pixels are being made larger - that depends on your camera settings and its photo output size. So it could be either or both of those that is the problem here. Check your camera and see what size you are taking your pictures in.

I have CS5 and want to upgrade to the new Photoshop and Lightroom.

Is it possible to install Indesign & Illustrator (CS5) and use the new PS and LR?

yes, you can use older versions of adobe programs and new versions at the same time.
i think the best deal for ps and lr is the photographer bundle for $9.99/mo, Creative Cloud free trial & plans : Adobe Creative Cloud

Am unable to click and open new tabs using the new tab button after downloading the newest version of firefox?

have recently downloaded the newest version of firefox. after installing i am happy to say i am pleased with the new look and features etc though for some reason i am unable to open new tabs as before.
i now have to right click on bookmarks or favorites and select open in a new tab to do so, rather than simply clicking on the new tab button..

If the problem turns out to be the "New Tabs at the End" extension, there actually is an internal setting for this that you could use instead.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
(3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false. That's it.

When using the new controls of CVI 7 in my DLL it crash on the DisplayPanel call

I have a CVI DLL that was build under CVI 6. When I recompile it in CVI 7 everything works fine when I load the DLL from my application. But If I add a button on my uir file with the new CVI 7 style (no event code associated, just a plain button) my DLL crash and hang my main application on the DisplayPanel call. If I don't use the new controls (use the classic-style controls) everything works fine. I use LoadPanelEx to load my uir file. The returned panel handle is good (> 0) But when I call DisplayPanel it doesn't show me any error but just crash my DLL and jump back in the DLLMain function saying that my process is detaching and hang my main application.
I am running on Win2k. I have
LabVIEW 7 and LabVIEW 6.0.2 installed also. The main application that calls the DLL is made in Delphi 6.
I have re-installed the run-time engine from the CDs but this didn't do the trick. Is there something else that I must include with my DLL to use thoses new controls styles. The DLL is running from the same place where it was build.

Hi,
I have created another cvi DLL and it create the same behavior in my application (crash on DisplayPanel). But if I do a standalone CVI executable with thoses new buttons everything is fine. Also I have created another application(in Delphi) to load the cvi-dll and it works fine in that one. So I would tend to say that it is in my application but on the other hand everything works fine if I don't put thoses LabStyle controls...Weird I know...
In shorts It is just crashing with a specific application but for any UI project that I create. If I don't put thoses buttons everything is ok...Any other advises would be helpful because I'm kind of out of ideas...
Gilles Hache

Using the new Call and Chat buttons

Similar Messages

Maybe you are looking for