Using TMS for setup system landscape

Hello everyone,
I'd like to setup system landscape (tr SMSY_setup) by using TMS and when i'm doing schedule data transfer from TMS/SLD background job is being canceled.
i'm recieving message "The SLD server connection is inactive" and dump "UNCAUGHT_EXCEPTION" there is. Why? I'm not using SLD.
regards,
Denis

Hi,
What do you mean by setup SMSY using TMS?
SMSY is getting all your system information like Add-on componenes, clients, hardware details, which the TMS cannot give. Understand the need for SMSY.
Feel free to revert back.
--Ragu

Similar Messages

Set up TMS for 2 system landscape

Hi!
I have 2 systems (DEV and PRD) with:
2 Clients in DEV system and one productive Client in PRD-system.
Client 100 DEV (Customizing DEV-System)
Client 200 DEV (Test Client DEV-System)
Client 100 PRD (Productive Client PRD-System).
What are the settings in STMS (transporte routes, delivery, consolidation) I should apply in order to set up my TMS-landscape?
Should I apply target group?
What are the settings/changes in profiles?
Thank you very much!!
regards

Ok, how do I set up this issue from Tx. STMS, from which Client in DEV-system (000, 100, 200)?
Should I apply extended transport management, define client dependent tranport routes?
Which parameters should be edited? (e.g. CTC)
Please describe in detail how to proceed...
Thank you!
regards

Defining CMS Track Data for 4 systems landscape

Hi all,
We are configuring CMS for 4 system landscape (DEV - TEST - QA - PROD).
The Track Data only allow 3 system landascape , as we can see "Landscape Configurator " and also in the following documentation:
http://help.sap.com/saphelp_nw04/helpdata/en/e9/c7cb6545a3446b92eff4f9ba876072/frameset.htm
XI Repository URL DEV
HTTP address of the server on which the XI development system is installed
XI Repository URL CONS
HTTP address of the server on which the XI consolidation system is installed
XI Repository URL PROD
HTTP address of the server on which the XI production system is installed
The question is :
" How can we define Track Data for 2 Consolidation Landscapes " ?
Thanks
Artur Moreira

Hi,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Also...
How to configuring the CMS for XI?
Please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Where can I get installation files of DTR, CBS, and CMS?
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202 -> How to Guide on
'How ToTransport XI Content Using CMS'.
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
Regards
Chilla

Transport target group and routes setting for 2 system landscape

Hi!
I have 2 system landscape (DEV with 2 Clients, 100 CUST and 200 TEST and PRD with productvie client 100).
Currently I have the standard TMS configuration for 2 systems (with tranport layers/routes ZDEV and SAP) .
Now I have to set up my TMS settings client specific
(Development in DEV 100 and transport to the DE 200 TEST and PRD 100).
I have created tranport target group /B-DEV/ with both target goals:
DEV 200 and PRD 100.
What are the further settings for transport routes?
I assume, I have to delete the existing routes ZDEV and SAP?
what are the next steps? 
Thank you very much
regards

Ok, I have in DEV system:
Client 100 (Customizing)
Client 200 (Test) (it can be considered as replacement of QAS-system, because we only have 2 systems)
PRD system
Client 100 (Productive client)
So we would like to set up the transport management system client specific, in order to develop in DEV 100 to test in DEV 200 and to use the transports in PRD 100.
Thank you very for your help
regards

Transportmanagemt for 2 systems landscape

Hello!
I am about to set up the client dependent TMS for the following 2 systems landscape:
system FID: client 100 (Customizing) , client 200 (Test)
system FIP: client 100 (Productive client)
In my current solution I put the transport target group between the two systems, so I can send the transports to the several clients.
Now I would like to replace transport target group with the client dependent transport routes:
consolidation route: ZFID --> 200
consolidation route: SAP --> 200
(both for the transport from FID 100 to FID 200)
delivery route: Delivery 200 --> 100
(route from FID 200 to the FIP 100)
My goal is to develop in client 100 (FID), to test in client 200 (FID), and if everything ok, to transport to the client 100 (FIP).
My question: Can I apply the second solution in order to realize better my goal?Which advantages/disadvantages has the second solution

Hi Thom,
I guess the advantage is with your second solution that you have something more like a traditional three-system-landscape. However because your development and test clients are on the same instance you're introducing some additional admin by applying transports for development objects (that are almost entirely client independent) back into 200, which really you don't need.
I feel the volume and type of transport you typically do will influence if the second solution is worthwhile. If you make lots of development changes you're probably best staying as you are. If your changes are mostly config, the change is worthwhile.
Regards,
Nick

Track for 4 system landscape

Hi,
Our system landscape including Dev, Stress,QA and Production systems and we want to define runtime systems for a track by defining four systems. So, that we can transport our Software Component from DEV > Stress > Test > Production.
In NWDI there are only three options to add runtime systems (DEV/Test/Prod) for single track.
Can any one please tell me, if there is some option to define our fourth system as runtime system for same track?
Thanks & Regards
Srinivas.

Hi Kenny,
wow, don't bring the hard stuff out.
To answer the question:
With the so-called "track connections" you can design your transport landscape in any possible way. No matter if you have two, three, four or twenty NW AS Java that need to be covered.
For info regarding track connections have a look at http://help.sap.com/saphelp_nw70/helpdata/EN/13/602b27f6fb41b4a9eb4f72eabb9832/frameset.htm.
Best regards,
Timo

Best Practice Advice - Using ARD for Inventorying System Resources Info

Hello All,
I hope this is the place I can post a question like this. If not please direct me if there is another location for a topic of this nature.
We are in the process of utilizing ARD reporting for all the Macs in our district (3500 +/- a few here and there). I am looking for advice and would like some best practices ideas for a project like this. ANY and ALL advice is welcome. Scheduling reports, utilizing a task server as opposed to the Admin workstation, etc. I figured I could always learn from those with experience rather than trying to reinvent the wheel. Thanks for your time.

hey, i am also intrested in any tips. we are gearing up to use ARD for all of our macs current and future.
i am having a hard time with entering the user/pass for each machine, is there and eaiser way to do so? we dont have nearly as many macs running as you do but its still a pain to do each one over and over. any hints? or am i doing it wrong?
thanks
-wilt

Create solution for each system Landscape?

Hi,
We are using Solution Manager 4.0.
We have created one solution and all of our ECC 6.0 systems with in ECC landscape have been already integrated with that existing 'Solution'..
Now, we are implementing BI 7.0 system.Since this is seperate landscape
would it be better if i created another solution and integrate all BI systems with
that?
I thought of taking your opinion before i implement that.
Thanks,
Ram

If you group them by system type, how do you classify the Leading Role of your Solution?
You have to assign, Dev, Test, Prd, etc to the leading role of your solution, other systems in the logical component that do not have the same classification that the solution is assigned wont show up.
edit -
Once you have an active solution you can edit your solution settings and add other systems to your solution even if the leading role of your solution differs from one of the systems of your logical component. You can simply add a system by adding the logical component that it is defined in, then right click on the system and click "add to solution".
Edited by: David Labuda

ChaRM for a 5 system landscape

Hi all,
we got a requirement to implement charm for 5 system landscape. but the problem is
currently the scenario followed for the rollout is
1. AA(DEV-proj)--> BB(QUA - proj)
Then the TR is forwarded from BB system to the maintenance landscape
DEV>QUA> PROD
they don't want to implement retrofit functionality.
is there any way we can mapp this scenario to charm.
kindly advice in this regard.
Thanks,
Subhashini.

Hi Ragu,
Thanks for the reply.
currently a two systems are separated from the maintenance landscape.
they are forwarding the TRs to the development system.
is there any way we create 2 tracks.
1. AA-BB-DEV-QUA-PROD
2. DEV-QUA- PROD
again i not having a clear idea on how to differentiate the tracks as both leads to the same production system.
or is there any way develop a custom method for forwarding this TR to the DEV system.
kindly sugggest on how to go about.
Thanks ,
Subhashini.

Doubts in System Landscape Directory

Hello All,
I got some basic doubts in SLD.
Why do we need to store the information about the installed products and to be installed products in software catalog?
And, what is this techncal system?
After reading few help sites, what I understand is the following:
For example SAP is a product and CRM etc are the software components. We create the technical system for this product like for client 100 we create a technical system and for client 200 we create another technical system. And we give some logical names, called business sytems, to these technical systems.
My second question is, why do we need to create all these information(the information in SLD)? Why cant we directly create messages types, message interfaces etc and configure them in Integration directory without using the information in SLD like business system?
In Integration Directory, we say that the sender is one Business System and receiver is another business system. These business system are created based on some technical systems. These technical systems are based on some software components and product. This product and the software component might be a installed or non installed product. Then how do we can get the connection between the sender and the business system? Can you please explain me the idea behind considering the sender and reciever as business systems.
Can anybody please clear the above doubts?
Priya

Hi Priya,
SLD:
The System Landscape Directory of SAP NetWeaver (SLD) serves as a central information repository for your system landscape. A system landscape consists of a number of hardware and software components that depend on each other with regard to installation, software updates, and demands on interfaces.
- so talking about the working of an SLD, here if any information is required for the integration server regarding the systems(logical or physical) and the software (installed products) it refers to the SLD.
- to tell you about the other features it has....it captures the dimensions of the system landscape like solution dimension, transport dimension and technical dimension.
- putting it in short XI IS A CLIENT OF SLD
Also go thru this link and understand more about SLD <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/31/f0ff69551e4f259fdad799a229363e/frameset.htm">System Landscape Directory</a>

SOFTWARE CATALOG:
The SLD contains a Software Catalog of all installable SAP products and software components. The Software Catalog includes information about support packages and dependencies between the products and software components. This information is the basis for the description of the system landscape.
Also go thru this link and understand more about Software Catalog <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/a2/2999ef97ea2b4790165f9ca5c05c41/content.htm">Software Catalog</a>
TECHNICAL SYSTEM, BUSINESS SYSTEMS, SOFTWARE PRODUCTS:
Technical system correlates the software to the physical host on which it is installed
Or in other words Technical systems are application systems that are installed in your system landscape.
- they are actually the basis for defining the business systems.
- we assign a technical system to a business system to help the SLD make the appropriate association.
- the software products used by the business system are got from the technical system definition.
- to note 1 technical system can have more than one business system assigned to it....and as told the SLD make the appropriate association between them.
Also go thru this link and understand more about each of it:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm">Technical Systems</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/42/c817d9d2296bb2e10000000a1553f6/content.htm">Business Systems</a>
<a href="/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation Preparation</a>
Regards,
Abhy

No User Mapping Defined for the system

Hi,
I am trying to create the transcation iView ,here in this i want to run the BW transcation..
For this i have created the transaction iView with the transaction code in that iview properties i have given the system alias which i have created for the BW system..
The system which i have created for this is SAP R/3 dedicated...
when i try to see the preview for this transaction iview it is giving the Error"No user Mapping defined in the system...
i have done the user mapping also...
Plz can any one help me in this..
useful solution will be rewarded...
Thanks
Shashank
Message was edited by: shashank moharana

Hi Shashank
the follwoing is total soln for connect EP AND BW and for ITS as well as SSO
Creating BW system in Portal
From the portal top-level navigation, choose System Administration -> System Configuration -> System Landscape
Navigate to Portal Content -> Your SAP Ssytem Folder i.e SAP BW
Right-click on the SAP BW folder, then choose New -> System
Select SAP system using dedicated application server
from System Template
Make the following entries for the BW system you want to connect to the Enterprise Portal
System Name -
SAP_BW
System ID -
Any ting u want like SAP_BW or SID of BW
System ID Prefix -
com.mycompany
Master Language -
English
Description -
NEXT -> Summary, review the options you selected for the new page.To make changes, choose Back to return to the appropriate screen. Then choose Next till you reach the Summary page, review, and choose Finish
Choose Open the object for editing and choose OK
The Property Editor iView will open
Select Connector in the Property Category dropdown
Enter the fields below according to your SAP system
Application Host -
IP Address of BW system or Host name ( FQDN required for SSO )
SAP Client --- BW system client
SAP System ID -
SID of BW
Server Port -
3200 default for system number 00
SAP System Number -
00 or ur instance number
System Type -
SAP_BW
NOW,
Select User Management from the Property Category dropdown list
Enter the fields below
Logon Method -
 UIDPW
User Mapping Type --- Admin,user
Note -: IF u want to use SSO for BW system first selct above and test it with BW system if it's ok than change to following
Logon Method -
 SAPLOGONTICKET
User Mapping Type --- Admin,user
choose SAVE.
Select System Aliases in the Edit dropdown list. This opens the System Alias Editor
In Alias, enter SAP_BW. Choose the Add button
Choose Save to save your changes and close the page
Connect With ITS
For BW
In Property Catalog, use the dropdown to select ITS.
Set your SAP system properties according to Following
ITS Description -
Description
ITS Host Name -
Host name : Port for BW system
If u want to use SSO use FQDN instead of host name
ITS Path -
/scripts/wgate
ITS Protocol -
http
Save your settings.
u can check its for BW by following
Find a port for BW using IIS manager
Administrator tools -> Internet Service Manager - >
extend the HOST
Find the site created for BW system same like SID of BW system -> right click -> Properties
TCP Port -- this is used for ur BW system
in IE http://host_for_its:Port_for_bw/scripts/wgate/webgui/!
WAS for BW System
Select Web Application Server (WAS) in the Property Category dropdown list
WAS Description -
BW WAS
WAS Host Name -
Host name : Port for BW system
use FQDN for SSO
WAS Path -
/SAP/BW/Bex
WAS Protocol -
http
Save ur entry.
User Management For BW and EP
Befor u start if u don't use SAP Secu lib during installation
change the following
system Administration -> System configuration -> Um configuration -> Direct editing
find out follwoing
ume.usermapping.unsecure=False
change to
ume.usermapping.unsecure=TRUE
Save and restart portal server
ther are so many option available for DATA source u have required doc for using that
if u have any query for that msg me back
Mapping Users in the Portal
if u want to use UIDPW than user must be map to BW system
go by following
User Administration -> User Mapping
select the user u want to map by serch or entering a name
Choose the Alias for your backend system, for example SAP_BW
Enter the user id and password for BW user
save ur changes.
SSO configuration
make sure ur Portal ITS and BW WAS system belong to Same
domain.
i.e
portal.mycompany.com
its.mycompany.com
bw.mycompany.com
if not, u can do by creating a alias into host file for corresponding system
for SSO follwoing parameter must be set in profile parameter using RZ10 in BW system
login/accept_sso2_ticket -
1
login/create_sso2_ticket -
1
login/ticket_expiration_time --- desired value default 60
now download the portal certificate form follwoing
System administration -> System configuration -> Keystore
Administration
donload verify.der file save it it's like verify.der.zip
extract it than u can get verify.der
now in BW system using trans. STRUSTSSO2
in the certificate section choose import certificate
choose the file tab enter the path of the portal's verify.der file
set the file format to DER coded
in the trust manager choose ADD to PSE and Choose
ADD to ACL
in the dialog box enter the portal system's id (SID) and client
by default portla system ID is the common name (CN) and client is 000
save ur entry and restart the BW server
this are the basci configuration if u have any query related to it msg me back
regards,
kaushal

System Landscape connection test fail

Dear EP expert,
I try to do a System Connection Tests for my system landscape and some part of the test failed.. Anyone have idea what is wrong with the configuration. Below are the test result and mainly are the HTTP/S connection and user mapping failed.
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (devportal01:50000)
5. HTTP/S connection failed
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (absmrq01:8001)
6. User mapping is not valid
7. HTTP/S connection failed
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Thanks,
Regards
Bryan

Hello gurus,
I am facing the same problem, could you please help me, the problem is http error detailed below
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name
5. HTTP/S connection failed
ITS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Check the validity of any user mapping in the system object
7. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name
6. User mapping is valid
7. HTTP/S connection failed
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection successful
Thanks
Edited by: Akbar Gudur on Jan 15, 2009 6:24 PM
Edited by: Akbar Gudur on Jan 15, 2009 6:24 PM

System Landscape and system alias

Dear All EP Expert,
I have some general questions.
1) If i wanted to connect my EP 7.0 to backend ECC 6. Is there any specific name that i must use for my system landscape and system alias?
2) Is the system lanscape come in when i include the business package?
3) Where can i download the latest ESS and MSS business package?
Can someone assist me on this?
Thanks you in advance...
Regards,
Bryan

Hi Brian ,
you cal also download latest ESS and MSS business packages from -->
download the business package from service market place.
Navigate through Downloads --> SAP Support Package --> Entry by Application group --> SAP Application Components --> SAP ERP --> SAP ERP2005 -->Entry Point by component -->SAP XSS Self - Service --> SAP ESS 600.
and similar for MSS 600 business package.
You cal also refer to this Note for further details about Self Services Business Packages.
[Note 1004528|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1004528]
Hope this helps.
And Regarding System Alias names, there is no such specific name you should keep, as no standard name exists , read more about it on.
[system aliases|http://help.sap.com/saphelp_nw70/helpdata/en/e9/9bc93f92908032e10000000a11405a/frameset.htm]
Also,
System Aliases and SAP Systems
For SAP systems (BW, CRM, and so on), it is recommended to use a system alias that has as its name parameter the logical system name as defined in the SAP system itself. The logical system is specified in Table T000 in the SAP system.
Reward points if helpful
Regards,
Shailesh Nagar
Edited by: Shailesh Kumar Nagar on Jan 18, 2008 11:29 AM
Edited by: Shailesh Kumar Nagar on Jan 18, 2008 11:37 AM

Can w use rsync for Business Continuity for Oracle Applications Release12 ?

Hi ,
One of our customer has implemented Oracle EBS R12 (12.0.6) on HP-UX (IA).
Database Tier on a Two Node Oracle Database 10g R2 RAC
Application Tier on Two Node using Shared APPL_TOP with Load Balancer.
They want to implement DR site using Oracle Data Guard (RAC to Non-RAC).
I was referring to Note: 452056.1 +( Business Continuity for Oracle Applications Release 12 on Database Release 10gR2 - Single Instance and RAC )+.
In this note its mentioned that:
If you wish to synchronize your concurrent manager log and out files between production and standby, you need to create folders matching to the APPLCSF environment variables for each others......................... For example, set up an rsync job similar to the below example in cron, to run every few minutes.
Can we use rsync for Production systems without any issues? Customer is concerned about using freeware on their Production systems.
Rgds,
Thiru.

Thiru,
Can we use rsync for Production systems without any issues? Customer is concerned about using freeware on their Production systems.You can use it with no issues. Or, you could use any other copy tool to copy those files.
Thanks,
Hussein

Using and Apex developed system and generating word documents

Started a new development project. We looked at using Apex for the system but ran up against a road block because the customer needs to generate word documents that they can edit and print. Does anyone know if Apex can handle this? Any suggestions on were to look for more information.

Hi Dawn,
Yes you can certainly do that, take a look at this quick overview -
http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
It refers specifically to PDF printing, however with BI Publisher you can output in Word Document format too.
Hope this helps,
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

Using TMS for setup system landscape

Similar Messages

Maybe you are looking for