Using Windows 8.1 64; trying to create a playlist; will only accept newly downloaded songs, none from existing library

Running Windows 8.1 64. Trying to create a new playlist, but the only songs it will accept are ones I just downloaded. No existing songs in my library will transfer.

Similar Messages

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

I am new to using Oracle, and I am trying to create an add/insert stored pr

I am new to using Oracle, and I am trying to create an add/insert stored procedure for a table. The PROD_CD and PLAN_CD fields in my table can have no value (empty or null) Can you please check my code and let me know what I am doing wrong?
Table definition:
CREATE TABLE DCWEB.USER_PLAN_PREFERENCE
USERID VARCHAR2(40) NOT NULL,
PROD_CD VARCHAR2(9) NULL,
PLAN_CD VARCHAR2(9) NULL,
STATE_LST VARCHAR2(2) NOT NULL,
STATE_NM VARCHAR2(40) NOT NULL,
LST_UPDATE_TS TIMESTAMP(6) DEFAULT CURRENT_TIMESTAMP NOT NULL
ALTER TABLE DCWEB.USER_PLAN_PREFERENCE
ADD CONSTRAINT USER_PLAN_PREFERENCE_XPK PRIMARY KEY (USERID, PROD_CD, PLAN_CD);
-- Grant/Revoke object privileges
grant select, insert, update, delete on DCWEB.USER_PLAN_PREFERENCE to HIGGIB1;
Stored Procedure Definition:
procedure setUserPlanPref (
userid in varchar2,
prod_cd in varchar2,
plan_cd in varchar2,
state_lst in varchar2,
state_nm in varchar2
is
currentTimestamp timestamp := current_timestamp;
begin
insert into user_plan_preference (userid, prod_cd, plan_cd, state_lst, state_nm, lst_update_ts)
values (upper(userid), upper(prod_cd), upper(plan_cd), upper(state_lst), upper(state_nm), currentTimestamp);
commit;
exception
when dup_val_on_index then
begin
update user_plan_preference up set
up.userid = upper(userid),
up.prod_cd = upper(prod_cd),
up.plan_cd = upper(plan_cd),
up.state_lst = upper(state_lst),
up.state_nm = upper(state_nm),
up.lst_update_ts = currentTimestamp
where up.userid = upper(userid)
and up.prod_cd = upper(prod_cd)
and up.plan_cd = upper(plan_cd);
commit;
exception
when others then
rollback;
end;
when others then
rollback;
end;
end;
INPUT DATA
I am unable to insert a record calling the stored procedure with values: DCWEB4578, , 2P, CA, CALIFORNIA but when I change to the string "NULL", the insert succeeds. When I try to call the stored procedure to update the inserted record with values: DCWEB4578, "NULL", 2P, CO, COLORODO the update does not happen since I still see the original record in the table. Please advise. Thanks in advance for your help.

938319 wrote:
I am new to using OracleWelcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and ensure you've updated your profile with a real handle instead of "938319".
You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
Thanks for posting the complete code, it makes it so much easier to understand the problem, but always post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.
and I am trying to create an add/insert stored procedure for a table.Does this have anything to do with APEX, for which this is the forum? General SQL &amp PL/SQL matters should be directed to the {forum:id=75} forum.
The PROD_CD and PLAN_CD fields in my table can have no value (empty or null) Can you please check my code and let me know what I am doing wrong?This:
commit;
exception
when others then
rollback;
end;
when others then
rollback;Remove it all.
Commits should be issued by end user/client software on completion of a transaction. This means <tt>commit;</tt> should almost never appear in PL/SQL code. The main exception to this is in <tt>dbms_job/secheduler</tt> scheduled processes that have no client or UI. If this code is executed from APEX, then APEX issues more than enough commits anyway.
exceptions are just a way of ensuring your code is buggy.<tt>when others</tt> exceptions are just a way of ensuring your code is buggy.
INPUT DATA
I am unable to insert a record calling the stored procedure with values: DCWEB4578, , 2P, CA, CALIFORNIA but when I change to the string "NULL", the insert succeeds. When I try to call the stored procedure to update the inserted record with values: DCWEB4578, "NULL", 2P, CO, COLORODO the update does not happen since I still see the original record in the table. Please advise. Thanks in advance for your help.With the <tt>commit</tt>s and <tt>when others...</tt> removed from the code you'll have a chance of seeing what's actually happening. Note that the entire procedure can be simplified by writing as a MERGE</tt> statement.

I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo

I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo several times, when I go to create the preset the adjustment brush is not an option to check. How do I add the adjustment brush to the develop presets. Thanks Ron.

The adjustment brush cannot be added to a develop preset.
If you can replace the adjustment brush with a gradient filter or radial filter, you can add those to a dev preset.
If a gradient filter or radial filter is not an option for you, you can at least create an adjustment preset to remember your brush settings.

Hi everybody, I am trying to create a DVD pal without menu with the program iDVD from a .mov file. Any ideas? Thanks so much.

Hi everybody, I am trying to create a DVD pal without menu with the program iDVD from a .mov file. Any ideas? Thanks so much.

(From fellow poster Mishmumken: )
How to create a DVD in iDVD without menu (there are several options):
1. Easy: Drop your iMovie in the autoplay box in iDVD's Map View, then set your autoplay item (your movie) to loop continously. Disadvantage: The DVD plays until you hit stop on the remote
2. Still easy: If you don't want your (autoplay) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the dropzone (text needs to be black as well). Disadvantage: The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time: Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage: One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software: Roxio Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn. Disadvantage: you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way": Postproduction with myDVDedit (freeware)
Tools necessary: myDVDedit ( http://www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned.If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager:
http://lonestar.utsa.edu/llee/applescript/dvdimager.html
Our resident expert, Old Toad, also recommends this: there is a 3rd export/share option that give better results. That's to use the Share ➙ Media Browser menu option. Then in iDVD go to the Media Browser and drag the movie into iDVD where you want it.
Hope this helps!

HT203167 I was trying to create a playlist to add to a second ipod I have and save my library of my other ipod and hopefully transfer between the two or organize additional playlist between the two. What I did was erase both and and back at point zero. l

I was trying to create a playlist to add to a second ipod I have and save my library of my other ipod and hopefully transfer between the two or organize additional playlist between the two. What I did was erase both and and back at point zero. lost everything. Tried to follow directions but I'm too stupid. Used the 'New play list" wrong i think and I know where original files are but no directions as to get it back. Its supposed to be a simple function of ipod bet not so!

An iTunes playlist can only contain songs that are in the same iTunes library as the playlist. There is neither a manual nor a scripted way to create an iTunes playlist that contains songs that are not in the library.
So, to do what you want, you would need to create a single consolidated library with all the music, and then create playlists off of that. Since your current drive is "chock a block full," the best way to do this will be to spend $50-$100 and get an external hard drive for iTunes.

I created a new library so I can use it for just my music, but now my ipod will only sync to my old library and not the new one I created, even though I'm in the new library when I open itunes. Any solutions?

I created a new library so I can use it for just my music, but now my ipod will only sync to my old library and not the new one I created, even though I'm in the new library when I open itunes. Any solutions?

The point is that there are four i product users for one computer in my house, and not everyone wants the same music on their device. Like I said before, the ipod is not syncing to the new library even though I plug it in when the new itunes library is pulled up. It keeps syncing to the old library...

I only use Windows XP, is there a version of Lightroom that will work with XP

I only use Windows XP, is there a version of Lightroom that will work with XP

Yes if you want to run Version 1....you can still download version 1.4.1 (the last update to Version 1), and your serial number would be good for that.
But if you want to run Version 2 or Version 3 you'll need to buy a new license (i.e. a new serial number), but if you have a valid serial number from any prior version you only have to pay for the upgrade license for the later version, not the full license.

I am trying to create my Apple ID, but not receiving the verification link from Apple,. I get the email but NOT the link,. any suggestions

I am trying to create my Apple ID, but not receiving the verification link from Apple,. I get the email but NOT the link,. I have triple checked my email address and all Apple account info, all of which are correct. Any suggestions?

Where are you trying to create it?
Go to appleid.apple.com and create it there. Type the country name in the space and a dropdown should appear. Nigeria is clearly available there.

I have the latest itunes and I use Windows and suddenly after working fine for years, itunes will not synch with OUtlook anymore. Any ideas?

I have the latest itunes and I use Windows and suddenly, after working fine for years, itunes will not synch with Outlook anymore. Any ideas?

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

Tried to upgrade os4 to os7 but could not due to "find my iphone" still turned on. Could not turn off at that stage so set up as new iphone. Now icloud will only accept past id email address which i no longer have, but itunes on my phone has my correc

Tried to upgrade os4 to os7 but could not due to "find my iphone" still turned on.
Could not turn it off at that stage so set up as new iphone. Now icloud will only accept past id email address and password which i no longer have,
but itunes on my phone has my correct current id and password. I need to restore my back up from itunes, i did not use icloud.
Any help please.
I did try yesterday but did not realise at that time that itunes had correct apple id. Hopefully this is a good thing!

Thank you for your prompt reply.
I have looked at icloud.com/find numerous times and my iPad is not showing at all (see picture below). As I said I did turn off 'Find My iPhone' on my iPad and then erase all settings and data before taking it to the repair centre.
The gentleman at the repair centre said that the device won't restore because "Apple thinks that 'Find My iPhone' is still turned on" (I'm repeating what he said).

How to create a stored procedure that accepts an array of args from Java?

I am to be creating a stored procedure that accepts an array of arguments from Java. How to create this? thanks
Sam

Not a PL/SQL question really, but a Java one. The client call is done via ThinJDBC/OCI to PL/SQL, This call must be valid and match the parameters and data types of the PL/SQL procedure.
E.g. Let's say I define the following array (collection) structure in Oracle:
SQL> create or replace type TStrings as table of varchar2(4000);
Then I use this as dynamic array input for a PL/SQL proc:
create or replace procedure foo( string_array IN TStrings )...
The client making the call to PL/SQL needs to ensure that it passes a proper TStrings array structure.. The Oracle Call Interface (OCI) supports this on the client side - allowing the client to construct an OCI variable that can be passed as a TStrings data type to SQL. Unsure just what JDBC supports in this regard.
An alternative method, and a bit of a dirty hack, is to construct the array dynamically - but as this does not use bind variables, it is not a great idea.
E.g. the client does the call as follows: begin
foo( TStrings( 'Tom', 'Dick', 'Harry' ) );
end;Where the TStrings constructor is created by the client by stringing together variables to create a dynamic SQL statement. A bind var call would look like this instead (and scale much better on the Oracle server side):begin
foo( :MYSTRINGS );
end;I'm pretty sure these concepts are covered in the Oracle Java Developer manuals...

I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?

I bought a used macbook pro from a friend. Software updates are available, but when I try to update, the computer asks for apple id and will only accept the former owner´s. How can I connect my macbook to my apple id?

The first thing you should do after acquiring a used computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind.
If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.

We have 2 itouchs, we a separate itunes account for each one. We have one home computer to use them both on for syc and icloud, the icloud will not accept the 2 accounts?

we have 2 itouchs, we a separate itunes account for each one. We have one home computer to use them both on for sync and icloud, the icloud will not accept the 2 accounts?

Do you know what happens if you delete the icloud account from an iphone 4s? Will it delete the pictures, documents, etc. from the phone, or just unlink the icloud from the phone? I want to associate a different icloud account to the phone.

I just installed photoshop elements 7 and tried to register and it will not accept my email address

I just installed photoshop elemants 7 and tried to register and it will not accept my email address. Help please. [email protected]

Hi Jeannet,
There is nothing in the registration screen which should prevent you from entering any valid email ID unless and untill you are mentioning the same ID in both the "E-mail" and "Confirm E-mail" field. Could you please confirm that?

Using Windows 8.1 64; trying to create a playlist; will only accept newly downloaded songs, none from existing library

Similar Messages

Maybe you are looking for