Using your remote with Win

First in winamp go to global hotkeys and enable them.
Now download intelliremote
http://melloware.com/download/
Install that and set it to run at startup. You can now use your remote to control winamp.Message Edited by robj20 on 06-06-2006 2:37 PM

Thank your for your nod. Intelliremote now works with X-FI too. Make sure to turn on Winamp hotkeys!
Intelliremote
http://melloware.com/products/intelliremotev2/

Similar Messages

Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

Is it possible to have a phone line connected to a Mac Mini (OS X10.8.2) so you can use your computer with Parallels (Windows xp) to dial into a modem to download data being collected and stored at the remote location?

Hi, do you mean a real Dial-up Modem as in the old days?
As I recall, the Apple USB Modem won't work in 64 bit OSes, but there are others that will, I think this is one of them...
http://www.zoomtel.com/products/dial_up_external_usb.html
Or is the Modem on the other end Cable/DSL/FiberOptic?

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Using Apple remote with macbook display closed

Hi ,
I have a macbook connected to LCD TV with HDMI connection .
Is there a way to use Apple remote with display closed .
examples of using apple remote with display closed would be
(1) waking the macbook with apple remote
(2) putting the macbook to sleep with apple remote
(3) Shutting down the macbook with apple remote
(4) accessing front row (using LCD TV as Display )
while doing this should I connect the macbook to power source.
please point me to any documentation / solutions available .
I don't have any external keyboard or mouse connected to macbook . I just want to use Apple remote to do the above functions .
Thanks
Suresh
macbook Mac OS X (10.4.9)

Hi suresh,
as mentioned here:
http://docs.info.apple.com/article.html?artnum=86286
and
http://docs.info.apple.com/article.html?artnum=300562
you must have to have a keyboard or mouse to trigger the macbook wake up from sleep when you close the lid.
usb mouse is not that expensive and you can start with that.
Good Luck

How do I use apple remote with iPhone 5 ?

How do I use apple remote with iPhone 5 ?

Iphones dont have ir at all which the remote use for comm
Only option is to use a dock which have ir

HT204378 2 iOS8.1.1 devices can't connect via BT "Using Keynote Remote with Bluetooth" - HT6112

I'm unable to get to iOS devices to connect via Bluetooth for Keynote control. It's described above under the heading "Using Keynote Remote with Bluetooth". Am I missing something? I see the article mentions iOS8 so I know it's been updated recently. I also see that this hasn't worked in the past. Curious that the articles suggests it can be done now.
I have 3 iOS devices all 8.1.1.
iPhone 5
iPhone 5s
iPad 3rd Gen
Thanks,
Russell

Just talked to Bose and learned the solution.
Reset the speaker ....hold down the bluetooth button until you hear a tone. Delete the Bose in the Bluetooth Device directory on the iPad. When it is automatically rediscovered it will connect.
Worked for me .....

How to use EJB Remote with Netbeans7.0 ?

I try to create Session Bean in Netbeans 7.0 but when I select Remote then I have to select Java Application in Netbeans. It different from Netbeans 6.8 ,6.9 which in Netbeans6.8, 6.9 not have dropdown for select Java Application when we choose Remote. So I don't know how to use EJB Remote in Netbeans7.0 then I click finish. After that, I create Project is Enterprise Application Client. but in Main.java at this line
BLSessionRemote obj = (BLSessionRemote)ctx.lookup("TestBean");
It can't find BLSessionRemote in Session Beans. How to use EJB Remote with Netbeans7.0 ?

Why don't you ask this question in the Netbeans mailing lists, where it belongs. Come here when you have problems with code you wrote yourself.

When trying to get onto my email, the following statement comes uip: "We are sorry, but you will need to enable cookies and Javascript to use your Username with this site. I click "here" but nothing happens. How do I enable cookies amd Javascript?

Trying to get t my email, this comes up: We are sorry, but you will need to enable cookies and Javascript to use your Username with this site.
How do I do this?
George Szanto<br />
[email protected]

see similar question answered at https://support.mozilla.com/questions/836913
To be notified of updates to a question whether it is your problem or not simply click on the "Get email notifications" and follow directed choice. Only the original poster can mark as solved, so there should be a slight difference in choice as an original poster and where you latch onto another question. The notifications only apply to the specific question where entered.

I'm using the remote with my iPod connected to iTunes why can't I search playlists on the iPod? It only lets me search playlists in iTunes

I'm using the remote with my iPod connected to iTunes why can't I search playlists on the iPod? It only lets me search playlists in iTunes and only let's me see the current playlist on the iPod only

You can only sync to one computer.
You would have to transfer purchases, but the apple ID would need to be the same.
Or find a 3rd party app to transfer content.

If I use the remote with two macbooks in the same room both of them answer

If I use the remote with two macbooks in the same room, the two of them answer. So if the person sitting near me is doing something else I interrupt them... this is quite annoying!
Does anyone know how to solve this? Should I report it as a bug? Where?

Hi Carito,
It is not a bug, all you have to do is pairing them.
Here is the link:
http://docs.info.apple.com/article.html?artnum=302545
and:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2275.html
Good Luck.

How can I use apple remote with Mountain Lion? Any Front Row alternative?

Hi All,
I recently upgraded from Snow Leopard to Mountain Lion.
All great except for my Apple Remote control.
Before, I could effectively control my iMac media with Apple Remote by using Front Row (music, photos, videos, good integration with iTunes and iPhoto).
Now, as I understand, Front Row is expired.
So, my Apple remote still works but with very limited options (just music, forward, backward and volume), and it's a real pity.
Any of you Guys know how to restore Front Row?
Otherwise maybe suggest an alternative (sth similar, should allow iMac media control by Apple Remote)?
So far I tried to restore all Front Row files by a Time Capsule Snow Leopard backup (as indicatred on some other Communities).
To restore was easy, but then, no way to launch it.
Any advice will help!
Thanks in advance/all the best.
Marco

Thanks Klaus1 for your prompt answer, although I went again through a dated discussion.
I also got the feeling that somehow they want to push Apple TV..
But, respectfully speaking towards our Friends at Apple, is it fair to promise what you don't deliver?
I have choosen apple because I percive it's different.
At currently published link: http://store.apple.com/uk/product/MC377Z/A/apple-remote
they do promote the following:
Apple Remote with Mac
The Apple Remote gives you total command of your music, photos, videos and DVDs from anywhere in the room. It works with Front Row - a menu-based, full-screen interface - to make accessing the digital content on your Mac as simple as navigating your iPod. When you press the Menu button, your desktop fades and the sleek, Front Row interface takes its place, to give you control over your music in iTunes, your photos in iPhoto, the videos in your Videos folder and your DVDs. Turn up the volume. Shuffle. Skip to the next chapter on your DVD. Play a slide show, a home video that you made in iMovie, even a film trailer.
Compatible with Apple products introduced in 2005 or later that have a built-in infrared (IR) receiver. Not compatible with MacBook Pro with Retina display.
Cost for this is 15£ (19€).
Now, I have iMac and Mac Book Pro (no retina display) both with Mountain Lion installed, and I understand both of them are not compatible with Front Row.
Actually I adore apple tv and I got 2 at home nicely working on 2 different TVs.
So I accomplished twice their wish of selling this product to me.
Why shall they deceive me (and many others, as I read) by killing a still promised service?
Should I read all forums before buying a trusted-brand-product like apple, to ensure that id does what declared?
Don't get me wrong, I'm an enthusiast user of the whole apple family, since many years, and still I am.
Just politely complaining for this decision, which creates to Many an easy avoidable disservice.
Cheers
Marco

Using the remote with PowerPoint

I can get the remote to work with Keynote just fine but it does not seem t work with PowerPoint. Is their a process to get the remote to work with both programs?
Thanks

If you have an iPhone, you can go to the app store and get Keynote Remote for free. The trick to make it work smoothly is to first establish your Macbook Air as wireless network. Then you use your iPhone to control the slideshow remotely, by swiping from slide to slide -- even from quite a distance.
Turn on your Macbook Air's airport (wi-fi), then select Create Network.
Once your Macbook Air is turned on as a network, open Keynote on your computer and your slideshow, but don't start the "view slideshow" mode just yet.
Open up Keynote Remote and if it doesn't connect automatically to your Macbook Air then select the network in Options.
Then start your slideshow from your iPhone -- you will notice each slide appearing on your iPhone as a reference.
If you still have difficulties linking, go into the Keynote preferences menu on your computer and make adjustments in the tab Remote. (And don't be fooled by the Bluetooth option -- strangely at this point it doesn't work between the iPhone and the Macbook -- only wireless.)
*Extra: You can enable "speaker notes" to show up on your iPhone below the picture of the slide.

Using Photosmart 7350 with Win 7

Is there a way to use a Photosmart 7350 Printer with Win 7?
This question was solved.
View Solution.

Hi @Eagle82 , and welcome to the HP Forums.
I see you are looking into installation options. Due to the age of the printer, there is no HP software available.
You can, however, use an alternate driver to regain your basic print functions. I am linking a document below with instructions on setting an alternate driver:
Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection
Please let me know if you have any questions. Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

How do I use your iPhone with multiple iTunes libraries

Hi, I have my music spread out between 3 seperate Itunes libraries on 3 different profiles on my computer. I have the newest generation Ipod Nano, Ipod Shuffle, and Iphone 4s. My Ipod's are both full, so I've decided to start putting music onto my phone. With my Ipod's, I can plug them into one profile on the computer, download the music on the Itunes library that exists on that profile, then do the same with the other profiles with no issue. However when I try to do this with my phone, It asks me to erase the music I have gotten from one Itunes library and sync with the current library, as soon as I plug it in to a different Itunes on one of the other profiles. I have my Iphone configured with the Manually manage music option, and I still haven't found a way to use my Iphone with multiple music libraries. PLEASE HELP

http://support.apple.com/kb/PH12113 - If you use manual syncing, you can sync items from more than one iTunes library to your iPod. (You can sync iPod touch, iPhone, and iPad with only one iTunes library.)
http://support.apple.com/kb/HT1202 - When manually managing content, you can add content from multiple libraries to your iPod or iPad. Even when manually managing music, some content may be available from only one library at time. This includes all content on iPhone and video content on iPod and iPad.
They seem inconsistent as far as the iPad is concerned but in both articles the iPhone appears to only be able to sync to one library at a time.
Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

Using Apple Remote with a PC?

Hi all,
I was wondering whether or not it's possible to use the Apple Remote with my Acer Aspire 1682? It has an infra-red port in it.
Stu

That's a pity. Is there anyway that I can download a generic remote control driver? Thanks for the reply.
Stu

Using your remote with Win

Similar Messages

Maybe you are looking for