/usr/bin/X11/mwm not running on when database startup

Hi Guys,
How is it going?
platform is linux
11.5.9
11.5.10.2
Please I would like the process /usr/bin/X11/mwm to automatically start when Iever i bounce the server or database.
So I modified our DB startup sript below to include the process,
It needs root to run so I used sudo.
Can some one good in scripting have a loom and see if this will work.
Thanks in adavance, also if there is a better way please let me know or metalink note.
#Start Oracle Database JUJU10 on BULLY
/dISK1/oracle/JUJU10db/10.2.0/appsutil/scripts/JUJU10_BULLY/addbctl.sh start normal
umask 002
/data1/oracle/JUJU10db/10.2.0/appsutil/scripts/JUJU10_BULLY/addlnctl.sh start
JUJU10
sudo
LD_LIBRARY_PATH=/usr/lib:/usr/dt/lib:/usr/openwin/lib:/usr/shlib:/usr/shlib/X11
export LD_LIBRARY_PATH
/usr/bin/X11/Xvfb :9 -ac -screen 0 1024x768x8 &
export DISPLAY=BULLY:9.0 /usr/bin/X11/mwm &
# End of Script

HI Cavin,
This is over my head but I can suggest you post here for help.
Category : Mac OS X Technologies
Carolyn

Similar Messages

Could not execute auto check for display colors using command /usr/bin/X11/

Hello,
In a work trying to install ORACLE 11gR2 software in AIX 5.3,
export DISPLAY=local_IPXXX:0.0
xclock
it works, can see the clock.
then go to dowloaded oracle, run
/xxx/11g203_AIX64_5L/database-> ./runInstaller
Your platform requires the root user to perform certain pre-installation
OS preparation. The root user should run the shell script 'rootpre.sh' before
you proceed with Oracle installation. rootpre.sh can be found at the top level
of the CD or the stage area.
Answer 'y' if root has run 'rootpre.sh' so you can proceed with Oracle
installation.
Answer 'n' to abort installation and then ask root to run 'rootpre.sh'.
Has 'rootpre.sh' been run by root? [y/n] (n)
y
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 190 MB. Actual 7470 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6144 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/bin/X11/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] n
User Selected: No
any idea to fix?
thanks a lot in advance

thank you for response
in log, it shows
Using paramFile: /xxx/11g203_AIX64_5L/database/install/oraparam.ini
Checking Temp space: must be greater than 190 MB. Actual 7194 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6144 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/bin/X11/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,Continue? (y/n) [n]
User Selected: No
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2012-09-17_04-08-40PM/installActions2012-09-17_04-08-40PM.log
~
--so nothing new as screen shows.
--ok, anonther way, say yes, shows..
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-09-17_04-00-30PM. Please wait ...xxxx:/xxx/11g203_AIX64_5L/database-> Exception in thread "main" java.lang.NoClassDefFoundError: sun.awt.motif.MToolkit (initialization failure)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
at java.lang.Class.forNameImpl(Native Method)
at java.lang.Class.forName(Class.java:130)
at java.awt.Toolkit$2.run(Toolkit.java:864)
at java.security.AccessController.doPrivileged(AccessController.java:192)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:847)
at com.jgoodies.looks.LookUtils.isLowResolution(LookUtils.java:484)
at com.jgoodies.looks.LookUtils.<clinit>(LookUtils.java:249)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:135)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:196)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:161)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:161)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:161)
at java.lang.Class.forNameImpl(Native Method)
at java.lang.Class.forName(Class.java:163)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1812)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:510)
at oracle.install.commons.util.Application.startup(Application.java:780)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:165)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:182)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:348)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:124)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:155)
Edited by: 951932 on Sep 17, 2012 2:12 PM

Make: /usr/bin/install: Command not found

I'm working on a PKGBUILD, but I'm running into this:
make: /usr/bin/install: Command not found
make: *** [install] Error 127
==> ERROR: Build Failed.
Aborting...
What would cause this? Old code? Missing package?

It was actually really old code, after a bit of successful this-should-probably-work script editing! I created a package in the AUR called dasm, which is an assembler for the Atari 2600 among many other systems.
http://aur.archlinux.org/packages.php?ID=37200

Sub: /usr/bin/ksh: sqlplus: not found.

Hi,
I installed Oracle 9R2 client on one server and i'm not able to execute sqlplus command it's throwing following error's
:oracle:/home/oracle#sqlplus
/usr/bin/ksh: sqlplus: not found.
:oracle:/u01/app/oracle/product/9.2.0#sqlplus
/usr/bin/ksh: sqlplus: 0403-006 Execute permission denied.
then i gave 777 permission to /u01/app/oracle/product/9.2.0
if i execute /u01/app/oracle/product/9.2.0/bin#sqlplus
i can able to connect
this is the Env variable i set in the .profile(AIX 5.2) PATH=/usr/bin:/etc:/usr/sbin:$ORACLE_HOME/bin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:.
Can anyone help me on this
Thanks!
Krishna R

then i gave 777 permission to /u01/app/oracle/product/9.2.0well, I would not do that...

Hi, i have installed a creative suite design standard few weeks ago but adobe Acrobat not run. When i launch it, Acrobat always ask me to accept "license agreement". Thanks for help

Hi, i have installed a creative suite design standard few weeks ago but adobe Acrobat not run. When i launch it, Acrobat always ask me to accept "license agreement". Thanks for help

http://www.interworks.com/blogs/rclapp/2011/07/20/adobe-acrobat-asking-accept-eula-after-u pdating-1010

Make: /usr/bin/ar: Command not found

Dear Team,
Following error are encountered while installing 11gR2 on RHEL 5.5.
make file log:
/usr/bin/make -f ins_rdbms.mk rat_on part_on dm_on olap_on sdo_on ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1//bin/sh: /usr/bin/ar: No such file or directory
/usr/bin/ar cr /u01/app/oracle/product/11.2.0/db_1/rdbms/lib/libknlopt.a /u01/app/oracle/product/11.2.0/db_1/rdbms/lib/kecwr.o
make: /usr/bin/ar: Command not found
make: *** [rat_on] Error 127
- All rpms requirements are met. I have re-install GCC as well.
Thanks in Adv.
Yuvraj

# yum provides /usr/bin/ar
Loaded plugins: security
binutils-2.17.50.0.6-14.el5.x86_64 : A GNU collection of binary utilities.
Repo : el5_u5_base
Matched from:
Filename : /usr/bin/ar
# ll /usr/bin/ar
-rwxr-xr-x 1 root root 52632 Feb 11 2010 /usr/bin/arCould your file system or system installation be damaged?
Perhaps you can try the following:
# touch /forcefsck
reboot

Automatic_Gather_Stats is not running in 11g Database.

Hi
we are having a 11.2.0.3 rac database on LINUX x86-64 machine. Two days back on wards we noticed that Automatic_Gather_Stats for the database is not running. When we chech the last analyzed for the schemas it is showing 28th NOV last day. After that its has not ran. From yesterday onwards we are running it manually. What could be the reason !
I had checked the DBA_AUTOTASK_CLIENT. The auto optimizer stats collection belong to group ORA$AT_WGRP_OS is enables. What else I should check . Kindly let me know.
Thanks
SHIYAS M

Here is the output of select state, last_start_date, job_name from dba_scheduler_jobs where job_name like '%STAT%';
STATE
LAST_START_DATE
JOB_NAME
SCHEDULED
01-DEC-12 01.01.01.512036 AM -07:00
MGMT_STATS_CONFIG_JOB
SCHEDULED
02-DEC-12 12.00.00.620416 AM -07:00
BSLN_MAINTAIN_STATS_JOB
But when I go through many documents it says that the Unlike 10g, 11g does not have the named scheduler job - 'GATHER_STATS_JOB'.
Rather it has 'auto optimizer stats collection' as a new feature on 11g.
- The duration times when the windows are open have changed in 11g.
- The duration times for windows of Monday thru Friday are from 10:00PM till 02:00AM and those for windows of Saturday thru Sunday are from 06:00AM till 02:00AM.
select client_name, status, window_group
2 from DBA_AUTOTASK_CLIENT;
CLIENT_NAME STATUS
WINDOW_GROUP
auto optimizer stats collection ENABLED
ORA$AT_WGRP_OS

SPUCWORKERPROCESS.EXE is not running message when debugging workflow on Sharepoint 2013

When I launch my workflow from Visual studio 2013 I get an error saying "Unable to attach. SPUCWORKERPROCESS.EXE is not running".
I verified that "Microsoft SharePoint Foundation Sandboxed Code Service " is running in Central Administration"
I pass these commands from powershell:
$acl = Get-Acl HKLM:\System\CurrentControlSet\Control\ComputerName
$person = [System.Security.Principal.NTAccount]"Users"
$access = [System.Security.AccessControl.RegistryRights]::FullControl
$inheritance = [System.Security.AccessControl.InheritanceFlags]"ContainerInherit, ObjectInherit"
$propagation = [System.Security.AccessControl.PropagationFlags]::None
$type = [System.Security.AccessControl.AccessControlType]::Allow
$rule = New-Object System.Security.AccessControl.RegistryAccessRule($person, $access, $inheritance, $propagation, $type)
$acl.AddAccessRule($rule)
Set-Acl HKLM:\System\CurrentControlSet\Control\ComputerName $acl
And I run Visual Studio 2013 as Administrator.
Effectively when I look in Task Manager there is no SPUCWORKERPROCESS.EXE but a lot of SPUCWORKERPROCESSPROXY.EXE.
My environnement developpement is a single Windows Server 2012 R2 as Domain Controler with Sharepoint 2013 SP1 and February 2015 Cumulative Updates. Visual Studio 2013 Update 4.
Any idea

Hi,
Per my understanding, there is an issue when deploying a workflow solution from Visual Studio.
I suggest you check the ULS logs to collect more information for troubleshooting this issue.
About how to check the ULS logs:
http://blogs.technet.com/b/fesiro/archive/2013/11/11/sharepoint-logging-and-troubleshooting-using-ulsviewer.aspx
http://blogs.c5insight.com/Home/tabid/40/entryid/190/All-About-SharePoint-2010-ULS-Logging.aspx
Also, you can try creating an empty SharePoint project without extra customization for a test to see if the issue persists.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Stored Procedure Does Not Run Properly When Called From Portlet

We have a simple Java portlet that calls a PL/SQL stored procedure which we wrote. The stored procedure sends a large number of emails to users in our corporation using the "utl_smtp" package. The stored procedure returns a count of the emails back to the Java portlet when it's finished. This number is displayed in the portlet.
Our problem:
The stored procedure functions as expected when run from a PL/SQL block in SQL*Plus, and the Java portlet calls the procedure properly when sending out a smaller number of emails (Less than 200 usually). When we get into a higher number of emails the procedure hangs when called from the portlet, but it STILL functions properly from SQL*Plus. It does not return the number of emails sent
and the Java portlet is unable to return a SQLException. Also, we have noticed that emails are sent at a much slower pace from the stored procedure when it's called from the portlet.

Any Ideas?

Repaint not running properly when called in another class/actionlistener

I've got this code that is suppose to call and create a JPanel
(The frame and timeframe variables were declared statically at the beginning of the class)
When I call the runGame1 method from the main, the code runs fine and my JPanel is being repainted with the time and pictures, but when I can this runGame1 method from an ActionListener/actionPerformed method, it doesn't repaint properly and the while loop is running properly but I think there isn't enough resources for the method to actually paint my JFrame?? The JFrames open but nothing is painted.
Anyone know what I can do?
More Info........................
Basically my program contains a title JFrame and 2 game JFrames, I want to be able to call the game JFrames from the title JFrames and go back and forth from the JPanels.
The title JFrame consists of just components such as JLabels and JButtons.
One of the game JFrames consists of JLabels, JTextFields and JButtons, basically the method generates random numbers and an arithmetic operation that the user has to calculate and enter in the program and the program checks if its correct or not.
One of the game JFrames consist of a paint method that paints circles and the user has to click on it and when a circle is clicked on, it is repainted to not show the circle.(a coordinate system is used etc etc)
public static void runGame1(){
          k=20;
          kcolor=2;
          fillcolor();
          checkcolor();
          frame = new Circlepix();
          timeframe = new TimerPanel();
          time1 = System.currentTimeMillis();
          //Repaints the count down
          while((60-seconds)>0){
               try{
                    Thread.sleep(1000);
               catch(InterruptedException e){
               timeframe.repaint();
               System.out.println("aaa");
          timeframe.dispose();
public void actionPerformed(ActionEvent e) {
               if (e.getActionCommand().equals("Reset Scores"))
                    game1score=0;
                    game2score=0;
               else if(e.getActionCommand().equals("Speed Circles")){
               mainframe.dispose();
               runGame1();
          }

main is running in a different thread (the main thread)
action events are sent via the event dispatch thread, and painting is done on the event dispatch thread.
You should always be calling your runGame1 method from a separate thread of your own, so you don't block the event dispatch thread and painting
http://java.sun.com/docs/books/tutorial/uiswing/concurrency/index.html
Edited by: bsampieri on Jun 5, 2008 4:50 PM

Can not run jar when updated to java 6 update 2.

After updating to update 2, the jar file can not be executed successfully.
C:\gominer>java -jar gominer.jar
Exception in thread "main" java.lang.UnsatisfiedLinkError: no awt in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.(Unknown Source)
at java.awt.Component.(Unknown Source)
Thanks for anyone's help.

where is spotlight search ? have searched and the icon is just not there its not in a folder on iphone. its just missing.

Scheduled process flows are not running automaticaly-OWB database clonning

What I did:
1.     Cloned the entire OWB repository database from live (bidb01.bh.xyz.com) server to new (green1.bh.xyz.com) server.
******     Source     New
Physical Hostname     bidb01.bh.xyz.com     green1.bh.xyz.com
DB Logical Hostname     xyzbidb      bidb-lh
Service Name     BIPROD     BIPROD
Listener Port     1521     1521
Oracle Home of RDBMS     /app/oracle/home/product/10.2.0     /orabidb/oracle/product/10.2.0
Oracle Home of OWB     /app/oracle/home/product/10.2.0/owb /orabidb/oracle/product/10.2.0/owb
2.     Followed the Metalink Note 434272.1 (How To Update Warehouse Builder After A Database Cloning)
Issue:
Before doing the step-2, every time we put the new database up the normal process flows which run every day (10 AM, 1 AM , 2 AM , 2 PM, etc.) got executed on the production environment and hung the original processes that are being run on the production environment.
After following the note 434272, scheduled process flows in production is working fine but in the new server it is not at all working.
Could anyone please help me to fix this?
Edited by: Padmanaban G on May 7, 2010 5:15 PM

The issue was resolved by renaming the workflow. What is learned here is, we should not have same workflow name for two different workspace.

Finder is not showing up when I startup my Imac::: Please help!

When I start up my Imac G5 and login, I see only my desktop image and the spotlight icon in the top right corner. When I rollover the spotlight I get the spinning wheel. The only thing that is getting Finder to launch is inserting a CD; when I do that Itunes and Finder, dock etc. all show up and work normally.
Does anyone know what is going on?
Also, I just updated Itunes and OSX if that has anything to do with this problem.

Spotlight is probably indexing, if you have a fair amount of data, it can take a while.
If you used Software Update to download 10.4.9, try re-updating using the 10.4.9 combo update, that often solves problems like yours.
Please post back,
Miriam

[SOLVED] Qtcreator won't start up: Timeout running '/usr/bin/g++'

I have no idea where to even start from or what to search for.
When running from terminal, qtcreator throws these lines (every few minutes) and doesn't start up:
$ qtcreator
QByteArray ProjectExplorer::runGcc(const Utils::FileName&, const QStringList&, const QStringList&): Timeout running '/usr/bin/g++'.
QProcess: Destroyed while process ("/usr/bin/g++") is still running.
QByteArray ProjectExplorer::runGcc(const Utils::FileName&, const QStringList&, const QStringList&): Timeout running '/usr/bin/g++'.
QProcess: Destroyed while process ("/usr/bin/g++") is still running.
QByteArray ProjectExplorer::runGcc(const Utils::FileName&, const QStringList&, const QStringList&): Timeout running '/usr/bin/g++'.
QProcess: Destroyed while process ("/usr/bin/g++") is still running.
There are no g++ processes before running qtcreator. After running it, I see new defunct g++ processes popping up (along with output above):
$ ps -ef|grep g++
void 1145 1126 0 09:23 pts/1 00:00:00 [g++] <defunct>
void 1234 1126 0 09:24 pts/1 00:00:00 [g++] <defunct>
void 1287 1126 0 09:25 pts/1 00:00:00 [g++] <defunct>
void 1389 1126 0 09:26 pts/1 00:00:00 [g++] <defunct>
void 1394 837 0 09:26 pts/0 00:00:00 grep --color=auto g++
This started a few days ago, probably after a recent update, I have a fully updated system. This doesn't happen on my other machine, but I can't find any difference. I even deleted QtCreator.conf and QtCreator.ini in ~/config/QtProject, but result is same. It didn't create new .conf and .ini files by the way.
Any help/advice on where to start debugging this is appreciated.
Last edited by axper (2013-05-04 11:28:15)

I have the same problem.
Well, at least, i also get this error:
% qtcreator
QProcess: Destroyed while process is still running.
QProcess: Destroyed while process is still running.
Cannot update Qt version information: /usr/bin/qmake-qt4 cannot be run.
Cannot update Qt version information: /usr/bin/qmake cannot be run.
QByteArray ProjectExplorer::runGcc(const Utils::FileName&, const QStringList&, const QStringList&): Timeout running '/usr/bin/g++'.
QProcess: Destroyed while process is still running.
[Edit]
Hang on, update fixed it for me..
Last edited by K-4U (2013-05-01 15:32:40)

Reports in Favorite Reports did not run when open

In SCOM 2012, I have run a few reports with the report template in the default SCOM management pack and saved them in the Favorite Report. When I open the saved reports at the Favorite Report again, they suppose to be run automatically. However, when I open
the report, it stopped at the parameters page and I need to click the run button explicitly. Does any one know why it is so and how can I make it run automatically when I open the reports which I have saved in the Favorite Report.
Thanks a lot for any advice.

Thanks a lot for your comment.
First of all, there is no error at all and no message in the event log that related to this issue. The report saved in Favorite Reports did able to run successfully without any error just only I need to click the run button manually. Suppose it should run
automatically, right?
Second, there actually two MS (say MS01 and MS02) and both of them point to the same SSRS. Say for example, the report saved in the Favorite Reports at the Operation console on MS01 will not run automatically when open it. The behavior is the same when using
the Operation console on MS02 to open that particular report saved on MS01.
However, when I save a report in the Favorite Reports at the Operation console on MS02, it will run automatically when I reopen it. Then I use the Operation console on MS01 to reopen this report, it will run automatically as expected.
In short, report saved in MS01 got problem no matter where you open it. Report saved in MS02 got no problem no matter where you open it. It is very weird and I don't know what setting in SCOM 2012 would affect this behavior. In a big head right now...

/usr/bin/X11/mwm not running on when database startup

Similar Messages

Maybe you are looking for