UTF8 without BOM and language support tools

Do you know edit applications can save UTF8 Java file without BOM and can work with language support tools (type any language in unicode edit mode) ?
Thank you very much !

Try jEdit from http:/www.jedit.org/.
However the NetBeans java IDE also is capable to work in UTF-8, by setting options appropiately.

Similar Messages

  • How to detect encoding file in ANSI, UTF8 and UTF8 without BOM

    Hi all,
    I am having a problem with detecting a .txt/.csv file encoding. I need to detect a file in ANSI, UTF8 and UTF8 without BOM but the problem is the encoding of ANSI and UTF8 without BOM are the same. I checked the function below and saw that ANSI and UTF8
    without BOM have the same encoding. so, How can I detect UTF8 without BOM encoding file? because I need to handle for this case in my code.
    Thanks.
    public Encoding GetFileEncoding(string srcFile)
                // *** Use Default of Encoding.Default (Ansi CodePage)
                Encoding enc = Encoding.Default;
                // *** Detect byte order mark if any - otherwise assume default
                byte[] buffer = new byte[10];
                FileStream file = new FileStream(srcFile, FileMode.Open);
                file.Read(buffer, 0, 10);
                file.Close();
                if (buffer[0] == 0xef && buffer[1] == 0xbb && buffer[2] == 0xbf)
                    enc = Encoding.UTF8;
                else if (buffer[0] == 0xfe && buffer[1] == 0xff)
                    enc = Encoding.Unicode;
                else if (buffer[0] == 0 && buffer[1] == 0 && buffer[2] == 0xfe && buffer[3] == 0xff)
                    enc = Encoding.UTF32;
                else if (buffer[0] == 0x2b && buffer[1] == 0x2f && buffer[2] == 0x76)
                    enc = Encoding.UTF7;
                else if (buffer[0] == 0xFE && buffer[1] == 0xFF)
                    // 1201 unicodeFFFE Unicode (Big-Endian)
                    enc = Encoding.GetEncoding(1201);
                else if (buffer[0] == 0xFF && buffer[1] == 0xFE)
                    // 1200 utf-16 Unicode
                    enc = Encoding.GetEncoding(1200);
                return enc;

    what you want is to get the encoding utf-8 without bom which can only be detected if the file has special characters, so do the following:
    public Encoding GetFileEncoding(string srcFile)
                // *** Use Default of Encoding.Default (Ansi CodePage)
                Encoding enc = Encoding.Default;
                // *** Detect byte order mark if any - otherwise assume default
                byte[] buffer = new byte[10];
                FileStream file = new FileStream(srcFile, FileMode.Open);
                file.Read(buffer, 0, 10);
                file.Close();
                if (buffer[0] == 0xef && buffer[1] == 0xbb && buffer[2]
    == 0xbf)
                    enc = Encoding.UTF8;
                else if (buffer[0] == 0xfe && buffer[1] == 0xff)
                    enc = Encoding.Unicode;
                else if (buffer[0] == 0 && buffer[1] == 0 && buffer[2]
    == 0xfe && buffer[3] == 0xff)
                    enc = Encoding.UTF32;
                else if (buffer[0] == 0x2b && buffer[1] == 0x2f &&
    buffer[2] == 0x76)
                    enc = Encoding.UTF7;
                else if (buffer[0] == 0xFE && buffer[1] == 0xFF)
                    // 1201 unicodeFFFE Unicode (Big-Endian)
                    enc = Encoding.GetEncoding(1201);
                else if (buffer[0] == 0xFF && buffer[1] == 0xFE)
                    // 1200 utf-16 Unicode
                    enc = Encoding.GetEncoding(1200);
               else if (validatUtf8whitBOM(srcFile))
                    enc = UTF8Encoding(false);
                return enc;
    private bool validateUtf8whitBOM(string FileSource)
                bool bReturn = false;
                string TextUTF8 = "", TextANSI = "";
                //lread the file as utf8
               StreamReader srFileWhitBOM  = new StreamReader(FileSource);
               TextUTF8 = srFileWhitBOM .ReadToEnd();
               srFileWhitBOM .Close();
                //lread the file as  ANSI
               StreamReader srFileWhitBOM  = new StreamReader(FileSource,Encoding.Defaul,false);
               TextANSI  = srFileWhitBOM .ReadToEnd();
               srFileWhitBOM .Close();
               // if the file contains special characters is UTF8 text read ansi show signs
                if(TextANSI.Contains("Ã") || TextANSI.Contains("±")
                     bReturn = true;
                return bReturn;

  • Production order creating without BOM and Routing

    create the production orders without bom and routing
    they confirm the order
    they want to stop confirmation if production without bom and routing
    is it possible to set error or warning message
    my first doubt is how can we confirm the order without bom and routing
    i think it can be solved by production order type
    please reply

    Hi,
    You can make it mandatory by following ways :
    Go to OPPQ -> Select your plant-> Go to BOM / Routing Selection in that you need to maintain BOM Sel ID & Routing Sel ID which is having selection ID with usage 1 Production which will make it mandatory to create BOM & ROuting with usage 1 & need to be selected while creation & saving Production ORder.
    Also, you can maintain another config. for making routing mandatory at Order type level :
    Go to OPL8 -> Select Plant & Order type-> Routing Selection
    Maintain 5     Routing/ref. op. set mandatory (manual selection)
    or          6     Routing mandatory (automatic selection)
    This setting will ensure without routing your order will not be saved.
    Hope this helps.
    Regards,
    Tejas

  • Production Order for a material without BOM and Routing

    Is it possible to create a production order for a given material without routing and BOM, I know we can
    create a production order for a material without a BOM (with a default routing) just wanted to check with
    the above criteria
    Thanks in Advance!!

    Members:
    Thank you for your valuable replies and time
    Santosh:
    Tried what you have mentioned, but system still picks up a default routing
    Kaushik:
    Maintained Default values in OPJG for the given order type, but system still picks up
    default routing
    Mangalraj:
    have no issue in creating a production order without a BOM, but I am trying to see
    is there a way where I can create a production order without a BOM and routing (not
    even default operation )
    Any suggestions on how to create a production order for a material without a BOM
    and routing (not even default one )

  • Material costing without BOM and routing

    I have recd an order on sample basis. I want to cost the materia. I don't have BOM and routing.  I want to cost that material manually.  Is there any provision in SAP to do costing in such type of scenarios.

    Dear BSR,
    I guess you are meaning about cost estimate without quantity structure.
    Check T Code KKPAN.
    Regards
    Mangalraj.S

  • Georgian keyboard and language support in Ipad/Iphone

    Dear Sir/Madam
    My concern is about official support of Georgian keyboard and language in all Apple products. Please add Georgian keyboard and language in Ipad/Iphone devices, because a lot of people are using Ipad/Iphone in Georgia and this issue is still out of support and assistance. I wish to receive any helpful information regarding this topic.

    These are user-to-user forums, you are not talking to Apple here (there are too many forums/threads/messages for Apple to monitor them). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/ipad.html (but note that they don't reply to feedback).

  • Upgrade and language support

    I've tried ringing the Adobe line but it seems that no-one is there.
    How much will it cost to upgrade to the Cloud from CS5.5 for three users. Plus does the new InDesign support Japanese and Arabic languages? If not, do we have to download different versions of InDesign to accommodate these languages and what cost will this incur? Many thanks.

    Hi Recidual ,
    Welcome To The Forums
    I would like to inform you that InDesign Supports Japanese and Arabic language.
    Promotional pricing for existing CS3–CS6 and Creative Cloud for teams customers applies to up to the first two years of membership. Offer ends February 28, 2014.
    Requires Adobe Creative Suite 3 or later serial number
    Requires annual commitment with monthly billing; team price is per user monthly ( $39.99/pm)
    Promotional pricing for existing Adobe Creative Suite customers applies to the first year of creative Cloud membership. Limited-time offer.*
    Requires annual commitment; billed monthly: Creative Cloud membership price is per user monthly ( $29.99/pm )
    For more pricing detials please refer to http://www.adobe.com/products/creativecloud/buying-guide.html.
    Thanks!
    Eshant

  • Adding new locale and language support

    Hi there,
    is it possible to add a non supported language to OIM Administration Console?
    The ideia is to copy one of the existing locale files and change their names, for example:
    we copied this two files xlRichClient_es.properties and xlWebAdmin_es.properties and renamed them to:
    xlWebAdmin_es_AR.properties and xlRichClient_es_AR.properties (Argentinian Spanish)
    then, at the xlDefaultAdmin.properties file, we just added this new locale: global.locales.es_AR=es|AR.
    Once this new locale is recognized, we can now edit the files text to...whatever..
    I'm not sure if I'm making myself clear enough, but...does anyone know if this is possible?! It seems so, though...
    thanks a lot!

    ok...it is basically like I said...
    If anyone needs to add a new language to OIM Administration Console, you just have to find your xlWebApp folder and at ...\xlWebApp\WEB-INF\classes you'll find the files that I was talking about. A pair for each language...(these files are within xlWebApp.war file, they just might have been extracted).
    In my case, OIM is only available in Brazilian Portuguese...and I needed to add European Portuguese (the mother language =D).
    So, you just need to copy the files xlWebAdmin_whatever.properties and xlRichClient_whatever.properties and rename them to the language you want OIM to automatically recognize (beware of the language code you need!).
    Again, in my case, I copied these two files xlWebAdmin_pt_BR.properties and xlRichClient_pt_BR.properties and renamed them to xlWebAdmin_pt.properties and xlRichClient_pt.properties...and voilá, now I just need to edit the content of these files to make the "translation" or whatever changes I may need.
    hope you find this helpful...
    chears!

  • Language Packs and Language Support

    i am a filmmaker and i type my scripts on pages'08, and recently i started working on a screenplay, which includes several languages besides english.
    my problem is with arabic, which is written from right to left (RTL), i was wondering if there was some kind of plugin or language pack that i could install, in order to write arabic with correct alignment and punctuation.
    or any other solution for that problem.
    thanx

    However, large minorities in India, Western Europe and the US use RTL
    There is a high level issue: The Latin script has been simplified by casters and compositors through five centuries and in the process it has shed its contextual calligraphic complexity. Eric Gill mourned the loss of the et-ligature in justification even in private press prints.
    Monotype Naskh was introduced in 1936 or 1937. It could meet the minimal requirement of kerning Arabic Naskh since the Monotype assembled sorts and not matrices. But not until Monotype introduced laser imaging was Nastaliq possible.
    If you look in the Monotype Recorder, New Series, you will see that until 1981 Urdu Nastaliq was beeing published in a process that began with calligraphers penning the page, then lithographers photographed the page and copied the master onto the printing plate.
    Reproducing Nastaliq in metal or film would in practice be impossible. If memory serves, the Müteferrika press in eighteenth century Istanbul reproduced Ottoman Turkish in about 1500 sorts for Naskh which is not as geometrically complex as Nastaliq.
    The problems become progressively more complex in digital mastering for hardcopy and finally in digital mastering for softcopy. Apple's TrueType Specification introduces a feature selector that layers the vocalisation on the consonants for children.
    Thinking of the Arabic script as a layering model is also as far as I am aware what Thomas Milo does in his Decotype Naskh for Adobe InDesign ME. I assume that Diwan Mishafi for Apple Advanced Typography does something of the same. I do not know what Kamal Mansour's Monotype Nastaliq for OpenType layout does.
    Yannis Haralambous has in his book a discussion of insertion in the TrueType Specification. Insertion is intended for Devanagari where the vowel character maps to an opening glyph code and a closing glyph code that embrace a consonant sequence. Again here you have a glyph representation that does not map one to one to a character representation.
    One of the problems with this is that if you do not know the script and the specific writing system, deducing what to search is difficult. Another problem with this is that if you depend on a stream of glyph codes to deduce the character codes intended by the original author, the layering model for Arabic and the insertion model for Devanagari pose problems.
    You can compare the situation for composing models for Arabic and Devanagari to the situation for colour separation models. There is active research on perceptual colour apperance and you can't say that one model is better than another model - it depends. Arabic and Indic pose some of the same problems, and commercial constraints on softcopy will do to Arabic and Indic what commercial constraints on hardcopy did to Latin, Greek and Cyrillic in the Renaissance and Rococo.
    Best wishes,
    Henrik Holmegaard

  • N91 Chinese language support and error msg: operat...

    Nokia phone: N91 WCDMA
    Firmware update: v2.20.008
    PC Suite: v7.0.82
    PC: Window XP 32-bit OS
    After updated the software, there is no Chinese for phone and written language. Is there any way that I can install the language instead of going to Nokia Care Centre? In spite of that, the Nokia phone browser prompt error message “The operation could not be completed” when I tried to access it. What is the problem?

    Hi!
    Can you give more details, especially your productcode? (You can find it by tapping *#0000# and it starts with 05**.)
    The question if you lose your Chinese language support depends on what exactly the dealer did with your phone, ie. which tools he used to flash it. So, I can't unfortunately this one without having the exact information. If he didn't fully change the productcode (and your phone is still on a supposedly Australian productcode), the update will set your phone back to the state in which it was when it left the factory. Meaning, your language pack will be back to default - without any Chinese characters.
    BR,
    yvonne

  • Hi, anyone know how to make a complaint without going through technical support or speaking to a senior sales advisor as i have an ongoing issue since February and still I am unable to get it resolved

    I recently got a replacement iPhone 4s due to a fault occuring with the phone and the replacement 4s that I received is turning off serveral times throughout the day by itself, I have been speaking to customer relations and technical support since the start of February in relation to my complaint and I seem to be getting a major runaround and still hae not had my issue resolved, is there anwhere else or even an email I can send my complaint to without going through those departments as I find the staff to be very unhelpful and also rude and aparently there are not managers working in Ireland at all only in the US, as I was told by a senior advisor yesterday

    For EUROEAN customers only, here is the e-mail address where to send the complaint, : [email protected]
    and also here is their EUROPEAN Customer Care centre postal address:
    Apple Customer Care HOLLYHILL Industrial Estate, HOLLYHILL, CORK, Republic of Ireland.

  • Win 8.1. Core language and multi-language support.

    HI,
    I've used a US developed program with multi-language support for years in Win XT and Win 7. As the program now supports win 8.1. I've upgraded to 8.1. and the new release of the program. However it will not work properly and the reason given is
    that my version of 8.1. has a different core language compared with what  the program uses and this version is not multi-language supported. Now I wonder if there are various versions of  the core language in 8.1. or is the core
    language unique, supported by various language packets for menu's, guiding texts, etc.  Why do I then need a multi-language supported program? Where can I put this question?
    Regards
    Sverre

    I'd probably try them here.
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=fsharpgeneral%2Cvcgeneral%2Cvbgeneral%2Ccsharpgeneral%2Cwindowsgeneraldevelopmentissues&filter=alltypes&sort=lastpostdesc
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • No Language and Input Support option in my OS 6 Applications list - need to add second language

    I have a Curve 9300 bought a few weeks ago in the Caribbean (Digicel carrier). I'm now in Germany and was able to switch between english and german languages for the past few weeks; however this evening I synced the device with my Macbook for the first time, which prompted an upgrade in software.
    Now I have OS version 6, but my language selection is only English and portuguese. When I select Applications on the desktop software, it does not give me the Language and Input Support option to re-add german.
    I tried uninstalling and reinstalling from the offiste RIM link,(where people can choose their international carriers), but the download is an unreadable Text Edit format. I've tried un- and re-installing on my mac, but that doesn't do anything, and i don't know how to uninstall from the device itself (plus am scared i'll lose all my info).
    Can anyone help? I've exhausted every option and I need to write in both languages for work...
    Thanks in advance!

    sariadina23 wrote : 
    I wanna add korean..
    Downloading OS pack? I haven't.. How could i? The link please..
    And,fyi.. I downloaded the bb desktop software from official blackberry website malaysia..
    And it's successfully installed,no prob at all..
    Hi sariadina23
    Please remember as this section of forums is for Mac so the below mentioned steps can only be performed on a PC only not Mac. If you want to install Korean language support on your device you can try this :
    1.Download and Install on your PC an  OS pack having All Language  from here Indosat or  Device Software Download Sites for BlackBerry
    ( Make sure you are downloading for the same device model )
    2.. Download and install the latest BlackBerry desktop software for Windows from here BlackBerry desktop software
    3.Search your C: drive for Vendor.xml and delete them, there may be one or two vendor.xml ( On your Pc change your folders option to show hidden files/folders ) :
        C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
        C:\Users\Windows UserName\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    Once completed Open BlackBerry Desktop Software for Windows > Select Applications. > In the Language and Input Support section, select the language to be added to the BlackBerry smartphone (a + will appear next to the language to install) > Click Apply.
    KB13067 : How to obtain language packs for BlackBerry smartphone.
    KB05305 : Localization support for BlackBerry Smartphones.
    So try it and let us know.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Help!  I accidentally deleted Apple Application Support... is there any way I can download it and reinstall it without deleting and reinstalling itunes?

    My huband is going to be so ****** if I have to uninstall and reinstall itunes.  PLEASE HELP ME!  If he loses his playlists or any other information it will be devastating... he has a radio show!
    When I try to open itunes it says that it won't open woithout Apple Application Support and says I need to uninstall and reinstall itunes.  2 things I'm afraid will happen.
    1.  He doesn't want to update to the latest itunes because all his friends told him not to because the newest version *****.
    2.  He might lose all his playlists and also even if he doesn't los his itunes library he might lose data and information about all the songs.
    I just really need to open itunes WITHOUT uninstallign and reinstalling it.  Is there ANY way I can do that?

    I also googled this question.  Someone said if I download quicktime it comes with apple application support.  Does that solve my problem?

  • Language and input support blackberry

    Hi,
    I've reloaded the BlackBerry OS 5.0.0.676 on my Pearl 9100, now when i go to the language and input support blackberry I only see english, so I went back to the App Loader and tried instaling diferent languages from there, but I only see the option for english. I'm running on a Mac, Mac OS 10.6.6 and the
    Software Name:
    BlackBerry Desktop Software v2.0.0.65 (Mac OS
    Who could assist?
    I need the spanish input option since i write a lot in spanish.
    Thanks in advance.
    Jean Redondo

    It is getting hard to find that information that can be posted here (terms of use, etc.). I did find this link, KB17215, which describes where to find the loader.exe file. There is this thread, 228990, the first post of which contains what I think you need. Note also message 24 of that thread. It contains an important step that you will need to insert between steps 1 and 2 of the first message.
    Let me know if I am being too cryptic.

Maybe you are looking for