Utilizing server ports 0-1023 on Solaris

By default, Solaris does not allow Java or any other applications open server ports on ports 0 - 1023, unless the application is executed by root. Does anyone know how can I get a non-root user, Java application priviledges to open a server port in this range?
Thanks,
Kevin

Port number 0--1023 are reserved for well known protocols so no other applications except the servers of those well known protocols can use those ports.
Normaly if you are writing your own server you should avoid using above range in any os.
Some OSs does not restrict the use but using above range will only create confuctions.
check the IANA website for more information

Similar Messages

GENERATEINg file on utility server process

hi All
i need to know abt the zfile process ie using logical file name
as i am generating a file on utility server
now in FM i gave as Zfile parameter for the utility server path and rest parthe i define in other parameters
like /MM/process etch
but i need to know abt the process as how to define the logical patha in FILe tcode and all the steps and how to take car for Qality and production ...
regards
Arora

> Thanks for the reply. What I understood is ..the script should run of the Non SAP system from where file is coming.
Depends on where the file is put.
> Can you provide the details required from SAP side for this.
> I believe..it should be STARTRFC command...and some function module to change the Idoc status....not sure??
That depends which function module you're calling.
We use a script to get data from an FTP server (from the SAP application server); if the server downloads a file it will be uploaded to the SAP IDOC inbox using startrfc, yes.
What you have call and how you find out whether there's a file or not must be decided at your side, we call it like
$PROGRAM -balanced -3 -d $DEST -u $USER -p $PASSWORD -c $CLIENT \
-I $LANG -s $DEST -F $FUNCTION -g $LOGONGROUP \
-h $MSGSERVER -E PATHNAME=$i -E PORT=$PORT
where $PROGRAM is 'startrfc' and $FUNCTION = 'EDI_DATA_INCOMING'.
Markus
Markus

How can I find out the server port for a secured FTP site and creating a FTP Connection Manager

I have to create a FTP Task to go out and get the files that our 3rd party vendor will be dropping on a secured FTP site. I have all the credentials to access that Secured FTP Site and have successfully done so through FileZilla.
Now I need to set-up a FTP Task to go out and get their files and in so doing create a FTP Connection Manager. Is there any way I can determine the
Server Port number from the Secured FTP site? I let it default to 21 and tried the Test Connect and it failed.
Thanks for your review and am hopeful for a reply.

Hi ITBobbyP,
SSIS has a built in FTP task, while this only works for the FTP protocol, it doesn’t support SFTP. But there are some free clients like WinSCP and
SSIS SFTP Task Control Flow Component
available in the CodePlex which can invoked from SSIS.
References:
SSIS SFTP Task Control Flow Component approach
WinSCP approach
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to install owb server-side software on UNIX Solaris (SPACR-64)?

Hi there,
How to install owb server-side software on UNIX Solaris (SPACR-64)?
I've read the install guide
and it mentions
3. Start the installer by entering the following at the prompt:
cd mount_point
./runInstaller
I don't have access to any graphical interface on the UNIX box e.g. x-windows nor any cd with the software, just the solaris software downloaded from web - does this include the runinstaller
and is the runisnatller just a command line interface?
I hoped I would be able to download the software from oracle website and then simply run the a setup scrip?
Is it possible to do this? Would I simply substitute cd mount_point to cd <directory I put software)
I've never ran oracle universall installer on UNIX before.
Many Thanks
Edited by: user575470 on Feb 15, 2009 7:54 AM
Edited by: user575470 on Feb 15, 2009 8:06 AM

Hi,
You can install the server-side software from the downloaded software.
You don't need the CD
You do need an X-windows client on your computer to connect to the server OR work directly on the server.
Without X-windows you cannot start the Oracle Universal Installer.
Maybe there is a command line installation, I have never used this.
I hope this helps.
Regards,
Emile

Changing message server port for ABAP+Java Instance

Hi,
We had change our message server port for the Java instance from 3607 to 3667.
We did this using the j2ee config tool. We also verified this information through the console config.
But when we look into system info URL using the URL as shown below, we still that the old message server port is being used. We have recycled the instance couple of times , but does not seem to help.
http://dfudsbw1.dfna.corp.dom:50700/sap/monitoring/SystemInfo
Any ideas where else we have to change the port no. for the message server

Hi guys,
I solved this on my own with documentation help from SAP.
I had to change the port no. in the Global dispatcher and Global server area as well.
Please see details from SAP below.
"Message Server: Changing Ports/Hosts shows which areas need to be adjusted if
the port or host of the message server changes. Ports are, of course, changed in the
instance profile of the Central Services instance. In the example, the port 3677 and
the HTTP port 8177 have been set, and the new host is called twdfxxx. You need to
use the Config Tool to set these values. For each instance, you need to maintain the
corresponding values for the Message server host and Message server port on the
Message Server and Bootstrap tab page. The connection details for dispatchers or
servers to the message server are maintained in the Cluster Manager. As shown in the
figure, the ms.host and ms.port are maintained, respectively, in the Cluster Manager
with Global Dispatcher and the Global Server. After you have maintained all of the
parameters, you can start the instances."

Servermgrd: cupsd's bootstrap server port not found

This issue was posted last fall, but no one had ever posted with a solution to it. About every 2 minutes in /var/log/system.log, I get the following message:
servermgrd: cupsd's bootstrap server port not found
This is on an Xserve running 10.4.5. No printers are attached or will be. I'm not sharing any printers either.
Again, its just an annoyance, but why is something logging to system.log if its not actually a problem?

same prob here. really annoying. ever find the cure?
-ed

Cupsd's bootstrap server port not found

I've got both Samba and CUPS turned off at startup, yet I get this recurring error in the system log:
Dec 12 19:07:12 /usr/sbin/smbd: cupsd's bootstrap server port not found
Dec 12 19:07:13 /usr/sbin/smbd: cupsd's bootstrap server port not found
Dec 12 19:07:13 /usr/sbin/smbd: cupsd's bootstrap server port not found
Dec 12 19:07:14 /usr/sbin/smbd: cupsd's bootstrap server port not found
I kill smbd but it starts up again, apparently thanks to /usr/libexec/launchproxy
I'm using the default configuration files for Samba and CUPS and there is no printer set up. Using OS X 10.4.3 (not Server). repaired permissions.
this is driving me nuts...any suggestions welcome.

I get that response all the time, it doesn't seem to have any relevance to anything and as far as I can tell, doesn't impair the functioning of my machine.
sometimes, too much information is too much information...
Miriam

Install of Oracle WebLogic Server 10.3.2 on Solaris 5.10

Hi Guys,
Has any done an Install of WebLogic Server 10.3.2 on Solaris 5.10 ?
Please provide steps, metalink notes or guides.
Thanks in advance.

Hi,
You can check http://download.oracle.com/docs/cd/E15523_01/doc.1111/e14142/console.htm#i1075285

Specify SQL Server Port During Setup

I am installing ConfigMgr 2012 R2 in an environment that requires remote SQL. In addition, the remote SQL uses a custom port and does not run the SQL Browser service.
Is there a way to specify the SQL Server port during setup? I know I can specify the port for the SQL Service Broker, but I need to specify the port for the SQL Server instance itself.
Any insight/experiences are greatly appreciated!
Thanks,
Jeff

You will need to change the port in SQL Server Network Configuration
See this technet documentation : https://technet.microsoft.com/library/ms177440.aspx
Benoit Lecours | Blog: System Center Dudes

SMTP Server (port 25) issues on iPhone - IOS 4.1, 4.2.1

SMTP Server Issues ios on iPhone 4.1 / ios 4.2.1
I use an IMAP email account Administered by my company ( I'am administrator in linux/freebsd, etc) and i have it set-up on my iPhone 4 (factory unlocked and NOT jailbreak). The incoming mail server works fine on wifi and 3G Both But the smtp server only works on wifi. If I Attempt to send a message while on 3G Attempts to send the phone for about 5/10/15... and never sent.
perform a downgrade to version 4.1 and the problem remains. Before ios 4.0.1 had no problems.
Testing:
I jailbreak (in 4.1) (only for install net commands in console), install console and "telnet smtp.mycompany.com 25" and time out, but turn wifi and connect; "ping smtp.mycompany" is ok.
Set wifi on, try "telnef smtp.mycompany.com 25" is ok !!!, turn wifi of, try 3G same problem, time out.
Restore no jailbreak 4.1 and try and same problem, restore 4.2.1 no jailbreak and same problem. Try change sim (personal to movistar) and same problem.
BUT!!!!!!! a try:
1) Change in my company smtp server port 25 to 587 (in really dnat 587 to 25).
2) set in my iphone smtp server new port 587 (same smtp server, but ONLY change port)
and ok !!!
I try, jailbreak, install console, telnet smtp.mycompany.com 587 is ok !!!!...
Where is the problem ios 4.1 / 4.1.2 smtp server port 25 ???????
Ios 4.1 / 4.2.1 very very many problems in 3G data in all applications.
apple, please support !! S-U-P-P-O-R-T
STEVE READ : http://en.wikipedia.org/wiki/Technical_support
tatoo support in head please!!!!! support support !!!!!!!

nevorask –
Thanks for visiting our forums. I actually had a similar
situation. I had the iPhone 3GS and used it all the time on a FM transmitter in
my car. When I upgraded to the iPhone 4, it wouldn’t work with the FM
transmitter. I never figured out why it wouldn’t work. I would suggest you
continue working with the manufacturer of the device or wait to see if the next
iOS update addresses this issue.
Please feel free to visit us again if you have any other
questions.
Thanks,
Jesus|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Dynamically pass server-port address in web.show_document

Dear All,
we have hardcoded server and port in
WEB.SHOW_DOCUMENT('http://10.4.2.2:7778/common/users/payroll/test.rtf');
how can i pass "'http://10.4.2.2:7778/" dynamically to web.show_document,Is there any environment file setting from where it can dynamically pick up the
<server>:<port> at runtime.
thanks in advance
Shikha

thanks for ur advice.
I have already tried .
i declared
my_web in .env file and assigned value http://10.4.4.2:7778/ to it.
then used
tool_env.Getvar(my_web,var),
but when we use
WEB.SHOW_DOCUMENT(var||mnt2/usegp1/user/payroll/test.rtf');
it takes path
http://10.4.2.3:7778/forms90/mnt2/users/shikha/common/psl/test.rtf');
i don't know from where it is adding /forms90 in path.
plz help.

Message Server Port and Instance Number

Hi All,
I need to create Technical System and Business System in SLD for my IDOC-XI-FILE Scenario. There i need to specify the Message Server port under Message Server and Instance Number in Central Application Server. Please let me know where i have to found these. Please help as soon as possible.
Thanks & Regards,
Nagarjuna.

Hi Nagarujna,
Instance Number : - just check the logon pad.. select your Ecc or R/3 system and click on chane item.... Usally it is 00.
Message server port : it is 3600 + instance no.
3600 + 00 = 3600
Sachin

Dynamically changing an existing dataconnection's server / port

Hi All,
Moving from one development environment to the next is sometimes a real pain.
Scenario:
- I have three environments: DEV, QA & PROD
- I have a livecycle designer pdf - FORM A - that has the following dataconnection: http://DEVserver:8080/....
- When I move FORM A from DEV to QA, i need to update the dataconnection to http://QAserver:8090/...
- When I move FORM A from QA to PROD, I need to update the dataconnection (again) to http://PRODserver:7890/...
1) this is a pain
2) this is a nightmare, when you have multiple dataconnections and many forms.
Proposed Solution, that I need input on.
The binding XML, will pass in the server name and required port number.
Then via code, I change the server & port of an existing dataconnection dynamically.
I tried: WebserviceCallButton.event__click.submit.target = "http://" + vServer + ":" + vPort + vURLCall;
However, it does not allow the change.
Am I missing something?
ANY INPUT OR ALTERNATIVE IDEAS
Thanks alot in advance.
I thought of maybe a trying to wrap a dataconnection into a fragment... no luck!

legendry response...
makes sense why they wouldn't want one to change the "set" dataconnection.
thanks for this...
will try it on monday!

LabVIEW VI Server port using netstat command

Hi Ppl,
I have been trying to use the netstat command to find out the port of VI server for LabVIEW as well EXE's running VI Server. Here is how we do it
First we have to get the process ID of LabVIEW or the EXE using the task list command ->tasklist |find /i "labview"
We then use the netstat command to find out the ports in which LabVIEW is listening ->netstat -a -o -n |find /i "<process id>"
I quite surprised to see that actually LabVIEW is listening in more than one port, here is the response to the above command:
  TCP 0.0.0.0:3363 0.0.0.0:0 LISTENING 7120
  TCP 127.0.0.1:55462 0.0.0.0:0 LISTENING 7120
  TCP 0.0.0.0:3363 0.0.0.0:0 LISTENING 7120  TCP 127.0.0.1:55462 0.0.0.0:0 LISTENING 7120
Here 3363 is the VI Server port that I'm using. I'm wondering what is the other port ? Is there any way that will help us narrow down to the VI Server port from these ports?
Thanks,
Sathish

127.0.0.1 is localhost. A server binding to that should be only accessible from local applications. Most likely it has to do with the LabVIEW online help or example finder application. The online help allows to drop for instance functions into your LabVIEW diagram and there has to be some form of interapplication communication for that to make it work. I would guess they do it through TCP/IP rather than a Windows only solution to allow this to work on non-Windows platforms too.
Other than that it is obvious that the 0.0.0.0 address is the VI server listen socket as it will need to be able to allow connections by remote clients too.
And the VI server default port is 3363. To use a different port you have to have a specific entry in your LabVIEW or executable ini file. So reading the ini file instead would seem even simpler.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Managed Server Port

I need the Managed Server Port.
I click Environment-> Servers, and get 3 servers. They are
AdminServer (admin), bam_server1, soa_server1. Which is the Managed Server?

Hi,
Except AdminServer....All the Other Servers are Managed Servers...In your case there are two managed Servers: bam_server1 AND soa_server1.
In a WebLogic Domain...there can be only One AdminServer ...rest all Servers are called as ManagedServers.
Thanks
Jay SenSharma
Edited by: Jay SenSharma on Jan 18, 2010 3:33 PM

Utilizing server ports 0-1023 on Solaris

Similar Messages

Maybe you are looking for