Changing message server port for ABAP+Java Instance
Hi,
We had change our message server port for the Java instance from 3607 to 3667.
We did this using the j2ee config tool. We also verified this information through the console config.
But when we look into system info URL using the URL as shown below, we still that the old message server port is being used. We have recycled the instance couple of times , but does not seem to help.
http://dfudsbw1.dfna.corp.dom:50700/sap/monitoring/SystemInfo
Any ideas where else we have to change the port no. for the message server
Hi guys,
I solved this on my own with documentation help from SAP.
I had to change the port no. in the Global dispatcher and Global server area as well.
Please see details from SAP below.
"Message Server: Changing Ports/Hosts shows which areas need to be adjusted if
the port or host of the message server changes. Ports are, of course, changed in the
instance profile of the Central Services instance. In the example, the port 3677 and
the HTTP port 8177 have been set, and the new host is called twdfxxx. You need to
use the Config Tool to set these values. For each instance, you need to maintain the
corresponding values for the Message server host and Message server port on the
Message Server and Bootstrap tab page. The connection details for dispatchers or
servers to the message server are maintained in the Cluster Manager. As shown in the
figure, the ms.host and ms.port are maintained, respectively, in the Cluster Manager
with Global Dispatcher and the Global Server. After you have maintained all of the
parameters, you can start the instances."
Similar Messages
-
Message Server Port and Instance Number
Hi All,
I need to create Technical System and Business System in SLD for my IDOC-XI-FILE Scenario. There i need to specify the Message Server port under Message Server and Instance Number in Central Application Server. Please let me know where i have to found these. Please help as soon as possible.
Thanks & Regards,
Nagarjuna.Hi Nagarujna,
Instance Number : - just check the logon pad.. select your Ecc or R/3 system and click on chane item.... Usally it is 00.
Message server port : it is 3600 + instance no.
3600 + 00 = 3600
Sachin -
There is 1 or 2 msg server for ABAP+Java system?
Hi, all:
I am confused by the number of msg server processes in ABAP+Java system.
We are running on Windows/Oracle platform.
There are 2 msg_server.exe at OS level. So it looks one of them belongs to the central instance and one of them belong to the central service of the Java stack. Am I correct? I've heard that even for an ABAP+java system, there is only one msg server. Which one is correct? Please share your opinion, thanks.Hi,
There will be 2 MSG servers running in ABAP + JAVA system..
1 for SCS and other for Central Instance.
ENJOY SAP -
Introscope Host Agent for ABAP only instance, fails with java.lang.NullPoin
Hello,
I'm trying to configure the Introscope Host Agent Adapter for ABAP 7.02 instance.
Solman Version is 7.1 ST 4, BASIS SP9.
I did created the Trust relationship between DAA and hostctrl and
also the same setup working find for Java Instance or ABAP+java Instance,
I'm not sure whether IS Adapter can be installed for ABAP only Instance.
Log file from Solman:
java.lang.NullPointerException
at com.sap.smd.server.manager.SMDPluginProperties.setProperty(SMDPluginProperties.java:119)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.setJCoUserAndPwd(AgentConfigWriter.java:1085)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.setLogonData(AgentConfigWriter.java:1075)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.createJcoDestinationVO(AgentConfigWriter.java:677)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.prepareSapAgentConfiguration(AgentConfigWriter.java:284)
at com.sap.sup.admin.wily.hostagent.Setup.setupAgentConfiguration(Setup.java:272)
Thanks
Srikanth MHi
I am sure, it is logically incorrect, how you deploy byte code agent in abap only instance
Introscope Bytecode Agent runs on managed systems based on J2EE engines to report data to the Introscope Enterprise Manager, so it has to be setup only for Java Stacks.
Please check with the wily config guide again.
I am watching this thread for further view from others.
Thanks,
Jansi -
FPN configured for message server port
Hello,
I would like to configure my Consumer Portal to connect to my Producer on port :8101 (the default message server port of the Producer). However, each time I try with this conifguration FPN breaks and nothing works - can't browse the PCD or see remote roles via Identity Management (when I switch the config back to point to port :50000 in the Producer object on the Consumer it works fine again). I'm not using a SAP web dispatcher between the two portals but Producer portal is indeed listening on port :8101 since I can hit it directly. Is this a limitation of FPN?
My http trace shows an ABORT message when trying to connect with the :8101 configuration.
The 8101 port is necessary to be configured in order to leverage our clustered load balanced environment which has the 8101 message server port listening and redirecting to a cluster of servers.
PatrickWhen using Remote Delta Links one can configure the SAP Message Server's RMI-P4 port (3901 by default) for RMI-P4 communication.
For the HTTP load balancing you cannot configure it to point to the HTTP port of SAP Message Server (8101 by default) only the application server's HTTP port on the Central Instance (e.g. 50000) can be used.
But don't bother yourselves with this, because SAP recommends using SAP Webdispatcher for HTTP load balancing in FPN scenario, so don't use SAP Message Server directly for HTTP load balancing in the FPN connection setup! -
Kernel upgrade having ABAP+JAVA instance
Hi team,
Can you provide the procedure how to kernel upgrade for our windows system having ABAP+JAVA instance releae version 700.
Provide the links, your replies are very helpful.
Regards
BhaskarHi Bhaskar,
You can use JSPM too in this case. Otherwise if you want to do it the old fashioned way:
> Stop SAP, Database, Saprouter, listeners and all the
related services.
> The location of the kernel is /usr/sap/<SID>/SYS/exe/run
> Take a backup of the files in this location and take a
print out of the ls -ltr (This is needed to give the new files the
correct permissions)
> Overwrite all the new files to the kernel location. The
purpose is to retain the old files for which the new version is not
available.
> The permissions of the file need to be changed as they
were before.
> Restart all the processes. The kernel upgrade is
now done. System
> status will give the newer version of the kernel.>
>
disp+work
Will give the
new Kernel version.
Finding files easily: http://www.easymarketplace.de/KernelPatches.php
Regards,
hemanth -
Hi all,
please show me how to check one message server port of a SAP system.
regards,
Chuong HoangGo to XI server system and open the Config Tool. There, for each installed instance, a message port and message server host is mentioned. Click on any instance and u will find the required info under tab "Message Server & Bootstrapu201D.
Regards,
Prateek -
How can i find SDM port , Message server port, Message server name?
Hi All,
I am tring to deploy a ear file from NWDS.
I am trying to congigure through
Windows>Preferences>SAP J2EE engine -- Remote.
I have these questions.
1. How can i find Message server Host?
2. How can i find Message server Port?
3. How can i find SDM port?
4. What is the difference betweent the Message server port and SDM port? Both are same or can be different?
5. What are the ways to deploy a ear file on remote J2EE engine ?
6.Can I run SDM from a remote mechine and connect to the server?
7. When i am trying to deploy a ear file i am getting
"Cannot determine sdm host (is empty)" what is the possible reason.
(Here i used information from /usr/sap/GXI/DVEBMGS00/j2ee/cluster/instance.properties for server host and port number)
Thank you
Ganges LeavesHi Ganges~
Please check this link~
Deployment Problem
Could not start SDM Server
SDM setting the target system for j2ee engine
"No route to host" - SDM
SDM Error
Can not deploy. sdm host is empty
Hope this helps,
regards,
moorthy -
Installing NW2004s ABAP+JAVA Instance
Hello
We are trying to install ABAP+JAVA instance for our CRM system . On our Dev machine we have installed the CRM as Central system and have done the Java ADD-IN . However while doing a system copy of this we have faced some problems regarding the Java part .
We wanted to install in the QA box , seperate instance of ABAP and JAVA for Nw2004s CRM using the same database via sapinst.
Any ideas of how to go about this ? Also has anyone faced major problems regarding system copy with sepetrate ABAP+JAVA instances setup for NW2004s .
Many Thanks .
RhitamHi ,
Please refer to the links below :-
may i know what kind of system copy are you trying for ? what's your OS used ?
http://help.sap.com/saphelp_nw04s/helpdata/en/69/c24cd04ba111d189750000e8322d00/frameset.htm
Note 785848 - Hom./Het.System Copy SAP Web AS 6.40 SR1 Java
Note 884452 - Remote export of Java stack
Regards,
Manomeet Mohapatra -
Hi,
Please let me know where can i find message server port number in CE 7.1 EHP 1
regards
swethaHi,
1.Go to http://localhost:50000/index.html
2.Click on "System Information"...we will get "System Info" and "Components Info" right side
3.Under System info we'll see Instance table.From that click second one in the list "SCS".Down details we can see
message server port
Message Server Host: localhost
Message Server Port: 3901
Enqueue Server Host: localhost
Enqueue Server Port: 3201
Thanks,
Murthy. -
Where to find Message Server port ?
How can I find the message server port on my portal server installation ?
- punamHi Punam,
There are various ways of finding this out. One way is that you check the following log file and you can see the message port for your system. As far as I remember default port is 3601 but anyway confirm it in this file
parameter is ms port
C:usrsap<SID><INSTANCEworkdev_* files for ex dev_jcontrol
You can also find this from SAP MMC as welk. Check developer trace after right clicking on message server process.
Also check out similar thread:
How can i find SDM port , Message server port, Message server name?
Regards,
Piyush
ps: please mark all useful answers. -
How to Changing Productive Client in an ABAP+Java System?
How to Changing Productive Client in an ABAP+Java System?
1. Log on to the ABAP system.
2. Call transaction SPRO.
3. Go to SAP Solution Manager Implementation Guide -->
SAP Solution Manager --> Basic Settings --> SAP Solution Manager
System --> General Settings --> Client Copy
4. Perform the following steps:
a) Maintain Profile Parameters
b) Create Client
c) Copy Client 000
d) Convert UME -
Change default communication port for BITS
We are currently using ConfigMgr2007 (native mode). We currently have a global GPO wihich is throttling BITS to 56kpbs during current business hours (8am-5pm). It has been suggest to use QoS to controll the amount of traffic used by SCCM distributions
to clients. Seeing the BITS uses HTTP (80) and HTTPS (443) by default, is there a way to change the default ports used by BITS.
I did find the following article (About Configuration Manager Client Installation Properties)
that there are two setting which can change the default ports.
CCMHTTPPORT=
CCMHTTPSPORT=
Is there any other methods to change the Default port for BITS communication as a whole.Thanks Kent and Jason. I know I posted in the ConfigMgr forum and you pointed my to the proper documentation. We have non-Microsoft email archiving product which utilizes BITS which is the reason for the general question regarding BITS.
I did not see a dedicated forum for BITS so I posted here.
The documentation as suggested by Kent will assist with making changes for ConfigMgr if necessary. -
TS3899 what is the outgoing server port for smtp
what is the outgoing server port for smtp
Google is your friend for searching for SMTP configuration for your Email provider
25 is blocked by most providers (because of spam)
465 and 587 are the ports used by authenticated SMTP setups. -
Directory structure for ABAP+JAVA Dialog Instance
Hello,
Can any one clarify how will be the directory structure in a case where we have ABAP+Java System?
For Central Instance,DVEBMGS<instance no>
Central Services,SCS<instance no+1>
Ex:DVEBMGS20
SCS21
If I have another dialog instance,can I have only ABAP or only Java in that?What will be the directory structure?But I read that they will be in 1:1 ratio
Will it be D22(Only ABAP) or J22(Java only).
As a dialog instance,can ABAP exist with out JAVA.
or can JAVA exist without ABAP
Please explain the directory structure with an example.
Thanks,
Sudheer.Sudheer,
http://www.redbooks.ibm.com/redpapers/pdfs/redp4200.pdf page No 24 should help you...
Maybe you are looking for
-
Why is my phone only backing up to icloud every 24 hours?
I have noticed recently that my phone only backs up to icloud about every 24 hours, regardless of when I have it plugged in and locked. For the last several weeks, it is backing up about 3 minutes later than it backed up the day before. This is get
-
I produced some videos in iMovie 10.0.2 and transfered they to iTunes 11.1.4. That worked so far.... After that I´ve compressed the movies for the use with iPhone and iPod .....also worked..... Then I tried to sync the movies to my iPhone4s with iOS7
-
Hello all, I need help desperately! Ok. so, I created a for from an existing document (PDF) on a mac computer. I did a test to see what would happen from the receiving end. When I distribute the form, the client receives it and fills in the blanks wi
-
Two axes CO-PA report by report painter
Dear CO-PA gurus I'd like to create CO-PA report on KE30 with two axes. My image is as attached. But, when I create form, I cannot show multiple characteristics in lead column. Please let me know how to create. Yoshi
-
The sim card for my new iphone 4, purchased today, is saying the sim card is not installed. I have followed the directions included on the support page but have two problems. 1. I can't open my sim card sleeve with the key and 2. I can't get any