UWL: headerless portal window launches with improper column justification

Hello,
We are running Portal 7.0, for our ECC 5.0 and SRM 4.0 production systems. 
When managers execute an item from their Universal Worklist, such as an absence notification, a new headerless portal window is launched. 
All of the viewable data should appear in the right column of the newly launched window. 
However, the window launches with a display that hides 90% of the right column, and the only way to view the data is to drag the column line back to the left side.
Specifically,I think that it is tied to a column width property of the new headerless portal window; however, I am not sure where that can be edited from.  I am looking at System Administration>System Configuration tab, and then Universal Worklist - Administration>Universal Worklist Configuration Content.   I can view the XML content, but it is not clear which of the multiple "launchInNewWindow" lines is the one responsible for our viewing problem. 
Any suggestions would be greatly appreciated!
Thank you,
Joyce

In case anyone else ever has this problem, here is the solution:
The problem was a bug that was fixed in the Basis Support Package SAPKB64018.

Similar Messages

  • Business Package 'open in separate headerless portal window' shows masthead

    We have implemented ESS and MSS 1.41 and SRM 7.0 in our development portal.
    When an iView with the property 'open in a separate headerless portal window' is opened, it opens in a separate window but with the masthead and TLN bar.
    I have checked the iView properties and they are set correctly.
    What causes the iView to show the masthead and TLN even when the property states headerless portal window.
    Thanks,
    D. Maupin
    University of Kentucy

    Hi,
    Please check this [link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d2aeb9-5f92-2d10-d38d-ded09c94330d?QuickLink=index&overridelayout=true].
    Hope it helps
    Regards,
    Samir

  • Error message in scanning:"The scanning software was launched with improper command- line arguments"

    We have downloaded and installed the HP Photosmart full feature Sostware and Drivers to Photosmart C3183 All-in-one.
    Click the Scan document in Solution Center-
    Error message displayed:
    The scanning software was launched with improper command-line arguments"
    Extended error information: 8,[(-1,0,0)]
    When Hp scan diagnostic utility  was used  - the message was: no scanners installed.
    how can we resolve the scanning problem
    nidataytay

    I have the same problem on a HP 5610 Officejet All-in-One.
    "The scanning software was launched with improper command-line arguments.
    8, [(-1, 0, 0)]"
    What is the solution? The scanner does not work. All other functions, print, fax, copy work from with in the HP Solutions Center software - but not the scanner.

  • Headerless Portal window - Same window

    Hi ALL,
    I want to open a headerless portal window on clicking on a hyperlink in the application .
    But I want this to opened in the same window.  I do NOT want this window to be opened in a new window.
    Please let me know your thoughts.
    Thanks in Advance...

    HI Sona,
    You may try this -
    1. You have a dynpro application. There is a link to open EP application.
    2. On this wd application view, add a ViewContainerUI Element. Add a view2 here
    3. While clicking on the link, navigate controls to view2.
    4. Do a form submit there, to open your EP application. (you may set this view invisible as per your req.)
    5. while creating the iview, set the property of the iview to open the view in content area only.
    Hope that will result in what you expect. Thanks,
    Best Regards
    Chander Kararia

  • NOT a website issue; but the canned choices are bad. Why must the Extensions window launch with FF every time??

    This canned menu is as bad as the cable company's. I do NOT want to start in safe/without extensions; but I am tired of having the Extensions box pop up on every browser start. can this be stopped?
    == URL of affected sites ==
    http://NA

    This issue can happen if there is a problem with the file extensions.rdf in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder].
    Norton software has been reported to cause problems with the extensions registry file extensions.rdf in the profile folder with the result that all extensions are enabled with every start of Firefox and incompatible extensions will need a manual compatibility check in "Tools > Add-ons > Extensions" (Find Updates) in such cases.

  • Appraisal Template - Issue with New Column addition.

    We have added one column u201CPriority %u201D which replaced an existing field (column) in one of the appraisal templates.
    When the user selects a value from the drop down and saves the template, it is not getting reflected in the portal.  Also the same isnu2019t getting updated in the backend DB tables (as seen from PHAP_ADMIN_PA). Upon displaying the template, the first available value in the drop down is shown by default instead of the selected value.
    As per our understanding the entire field values are read from standard function Module u2018HRHAP_DOCUMENT_CHANGE_STATUSu2019 into corresponding internal table t_body_elements.
    But the value (Row X Column) for that particular column is not seen in the structure.
    Please give inputs as to why the changed % value is not being saved and shown in the template.
    The column is maintained in the template like the other columns and the value range is also maintained in the u2018Edit Appraisal Scalesu2019 in SPRO.
    Thanks
    RK

    Hello Siddharth,
    Thanks for you reply. Still the same issue. Following are the config I did till now:
    In the PCD I created a new business object (SWF_WIOBN), an operation linked to the object (NAVIGATE).
    I did create an iView (powl) in the custom folder, I integrated the operation within iView. I created a page that contains the iView.
    In the properties of the iView I gave:
    Application Name: HAP_MAIN_DOCUMENT.
    Launch in New Window: "Display in separate Headerless Portal Window".
    System: SAP_ECC_HumanResources
    I added the required entries in tables:
    IBO_C_WF_TTAS
    IBO_C_WF_ACS
    IBO_V_WF_TAC
    IBO_V_WF_TTAC
    etc...
    I saw in the code of linked feeder class: CL_IBO_INBOX_FEEDER_WI  that it's checking something called "Launch_Editor".. Is it a property that we can set somewhere?
    Following are the parameters retrieved by system:
    BO_NAME       =  SWF_WIOBN
    BO_OP_NAME = NAVIGATE
    LAUNCHER_PARAMETERS ->  empty.??
    BO_RESOLVE_MODE = USER_SET_OF_ROLES
    LAUNCH_EDITOR  empty where must be set?
    At the end I still get the error:
    There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator.
    Any advice,
    Thanks in advance

  • Open application in headerless portal

    Hi,
    I would like to open an WD application in the portal with a link.
    And I would also like the portal to be headerless (without TLN).
    I tryed to add ?NavMode=3 to my link.
    I also tryed to modify the properties of the page in which the WD aplication is so that the "Launch in new window" is "display in separate headerless portal window" .
    But with no chance.
    Any idea how to have the portal headerless ?
    (for information, here is the link: http://server:port/irj/portal/a1s?NavigationTarget=ROLES%3A//portal_content/com.sap.pct/com.sap.pct.a1s.a1s/com.sap.pct.a1s.itsam/com.sap.pct.a1s.es/com.sap.pct.a1s.SupportStudioId/com.sap.pct.a1s.IncidentReplay?DynamicParameter=incidentId%3d3A39F2E0A3FA11DC9DF600300571DDCC%26lSys%3dBCDT%26BOTechnicalName%3d3EB158B36A5432D4771A4C37268EEC2CA0EF6BE4%26Operation%3dOpen%26SystemAlias%3dSAP_A1S_VC%26objectKey%3d0017084CDD0C1DDCA781D11A4CF54C1C%26idTypeName%3dUUID%26idTypeNameSpace%3dhttp%253a%252f%252fsap%252ecom%252fxi%252fAP%252fCommon%252fGDT%26boName%3dRfqOifModify%26boNameSpace%3dhttp%253a%252f%252fsap%252ecom%252fxi%252fA1S%26boNodeName%3d%26boNodeNameSpace%3d)
    Thanks and regards,
    Marie-Pierre

    Hi Marie,
    try this code:
              IWDWindow win = wdComponentAPI.getWindowManager().createNonModalExternalWindow(url,"DateCustDialogWindow"); //.show();
              win.setTitle("Transaktionsmanager");
              win.setWindowSize(600,600);
              win.removeWindowFeature(WDWindowFeature.ADDRESS_BAR);
              win.removeWindowFeature(WDWindowFeature.STATUS_BAR);
              win.removeWindowFeature(WDWindowFeature.MENU_BAR);
              win.removeWindowFeature(WDWindowFeature.TOOL_BAR);
              win.show();
    This removes all those window features, that make the window "headerless".
    regards,
    Christian

  • Direct URL to Federated Content opens in new portal window

    Help!  I have Remote Delta Links on my producer portal to my consumer portal BW IViews.  I have both the producer portal IViews and the consumer portal Remote Delta Links configured to open in a headerless Portal window. 
    I have built an URL to call the Consumer Remote Delta Links.  The call works, but the browser opens up to the full portal view instead of the headerless Portal window.
    Is there an URL parameter I can use to force it to open in a headerless window?
    Anyone know why? Can Anyone help?
    Help!  Thanks!

    I found an url parameter and forced it to open the way I want it to:
    The solution parameter is:
    &NavMode=3
    Thanks!

  • WDA app not launched with SSO when called from portal

    Hi,
    we have configured our systems so that our portal (NW Portal 7.0) is issuing logon tickets and ERP6.0 is receiving them in the backend for single sign-on.
    When launching a SAP GUI for Windows transaction (System admin->Support->SAP Application) to test if the SSO is set up correctly, all goes well and I'm able to call e.g. SU01 with logon tickets from the portal.
    My problem is that when calling a Web Dynpro for ABAP application in the same backend system from the same portal, I get an error "SSO logon not possible; logon tickets not activated on the server" and need to login manually when starting the application.
    When looking at the WDA app URL, I see http://<backend server>.<domain1>.com/... and the portal is sitting on http://<portal server>.<domain2>.com. Could it be a problem if the backend system is in another domain? And if yes, how come the SAP GUI for Windows launch then works (related to an http connection and domain relaxing?)? How to go forward and make it work all right?
    Best regards,
    Mikko

    Hi Navarro,
    Merry Xmas:)
    >>We did the same test with the demo app from you (MS)
    http://msdn.microsoft.com/en-us/library/windows/apps/hh202967(v=vs.105).aspxand it still don't work. (remember to setup
    fast app resume)
    Yes, I can reproduce your issue using the official sample.
    I think this issue is caused by the mechanism of Fast app resume, please refer to the following reference:
    #Fast app resume for Windows Phone 8
    http://msdn.microsoft.com/en-us/library/windows/apps/jj735579(v=vs.105).aspx
    Quote:
    With Fast Resume, when an app is resumed, the system creates a new page instance for the target of the launch point and this page is placed on top of the app’s existing backstack.
    This official sample can also help us to understand how it works:
    https://code.msdn.microsoft.com/windowsapps/Fast-app-resume-backstack-f16baaa6
    We could find that the Application.Launching event will not be triggered if we used Fast app resume, this will affect responding Toast's parameter(Deep Link).
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • RRI: target(iview) launched with another window

    Hi,
    I would like to Jump from (2004s)BI web report to target iview. and I want target window to be launched with another window.
    I am glad if you advice how to do so.
    Kind regards,
    Masaaki

    You can use the EPCM object to navigate to a any iView in the portal. See the attached documentation.
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/21bb7485750bd5e10000000a422035/content.htm

  • How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

    Hi my name is vishal
    For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
    Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.Windows.Forms;
    using System.Data.SqlClient;
    using iTextSharp.text;
    using iTextSharp.text.pdf;
    using System.Diagnostics;
    using System.IO;
    namespace DRRS_CSharp
    public partial class frmPDF : Form
    public frmPDF()
    InitializeComponent();
    private void button1_Click(object sender, EventArgs e)
    Document doc = new Document(PageSize.A4.Rotate());
    var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
    doc.SetMargins(50, 50, 50, 50);
    doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
    doc.Open();
    PdfPTable table = new PdfPTable(6);
    table.TotalWidth =530f;
    table.LockedWidth = true;
    PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
    cell.Colspan = 6;
    cell.HorizontalAlignment = 0;
    table.AddCell(cell);
    Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
    para.Alignment = Element.ALIGN_CENTER;
    iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
    png.ScaleToFit(105f, 105f);
    png.Alignment = Element.ALIGN_RIGHT;
    SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
    SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
    conn.Open();
    SqlDataReader dr;
    dr = cmd.ExecuteReader();
    table.AddCell("Reprocessing Date");
    table.AddCell("Patient Name");
    table.AddCell("Dialyzer(Manufacturer,Size)");
    table.AddCell("No.of Reuse");
    table.AddCell("Verification");
    table.AddCell("DialyzerID");
    while (dr.Read())
    table.AddCell(dr[2].ToString());
    table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
    table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
    table.AddCell("@count".ToString());
    table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
    table.AddCell(dr[0].ToString());
    dr.Close();
    table.SpacingBefore = 15f;
    doc.Add(para);
    doc.Add(png);
    doc.Add(table);
    doc.Close();
    System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
    if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
    var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
    else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
    this.Close();
    The above code executes well with no problem at all!
    As you can see the file to which i create and save and open my pdf report is
    AssignedDialyzer.pdf.
    The column headers of table in pdf report from c# windows forms using iTextSharp are
    "Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
    "DialyzerID".
    However the problem i am facing is after execution and opening of document is my
    column headers in table in pdf report from
    c# and datas in it all appear in bold.
    I have browsed through net regarding to solve this problem but with no success.
    What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
    Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
    I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
    Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
    If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
    vb6,adodb with ms access using iTextSharp?
    I have approached Sound Forge.Net for help but with no success.
    I hope anyone/someone truly understands what i am trying to ask!
    I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
    Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
    I hope i get a reply in terms of solving this problem.
    vishal

    Hi,
    About iTextSharp component issue , I think this case is off-topic in here.
    I suggest you consulting to compenent provider.
    http://sourceforge.net/projects/itextsharp/
    Regards,
    Marvin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Windows.Launch contract failed with error: The app didn't start..

    We have installed windows 8 Prof X64 Edition; none of the Metro apps are not getting launched; the system is added in domain, the event viewer has the below information for one of the app.
    Event Under: Applications
    App microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat did not launch within its allotted time.
    Event Under: AppHost
    The App Host has encountered an unexpected error and will terminate. The error is  0x8007000E.
    Event Under: Microsoft-Windows-TWinUI/Operational
    Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat for the Windows.Launch contract failed with error: The app didn't start..
    Regards Ajinkya Ghare MCITP-Server Administrator | MCTS

    Hi,
    Try to put a machine disjoin the domain to see if the same issue occurs.
    Sometimes the Windows 8 machines cannot use metro app once join the domain, you can try this method:
    1- Open "Local Group Policy Editor"
    2-Navigate to "Computer Configuration - Administrative Templates - Network Isolation"
    3- Open "Internet Proxy Servers for Metro Style Apps" and set the value to your proxy server address like 172.16.0.1:8080.
    Regards,
    Leo  
    Huang
    Leo Huang
    TechNet Community Support

  • I downloaded the iCloud app to my PC (Windows Vista with Service Pack 2).  But now why I launch the aplication, i'm getting an arror message that says "Unable to launch app due to side-by-side comparison".  What do I need to do?

    I downloaded the iCloud app to my PC (Windows Vista with Service Pack 2).  But when I try to launch the app from the start menu, I'm getting an error message that says "Unable to launch due to side-by-side configuration".  What do I need to do?

    Sounds like a Windows issue.  Google the error message.  There are several discussions on the Microsoft forums listed that may help.

  • Windows 7 with IE 9, portal patch issue..

    Hello,
    My portal version is : 7.00 SP20
    Seems there is an issue with portal on Windows 7 with IE 9. Please let me know whether we need any upgradation or updation of patch or anything ?

    Can you see or play any Flash content?  Does YouTube work for you?  What troubleshooting steps have you taken?  Can you try Google Chrome and see if that makes any difference?
    Thanks,
    Chris

  • I accepted a version update and now iTunes closes on launch with the message "iTunes has stopped working. Windows will close the program and notify you if a solution is available." What to do?

    I accepted a version update and now iTunes closes on launch with the message "iTunes has stopped working. Windows will close the program and notify you if a solution is available." What to do?

    Hey Todd Rubenson,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows unexpectedly quitting. The following resource may provide a solution:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Thanks,
    Matt M.

Maybe you are looking for