Vacation Message using old/incorrect data

I have a mail server that refuses to accept a new vacation message. The problem is worse than that because it is sending out a vacation message from over a year ago that had been disabled, even though it shows as disabled in the web interface.
Here is what I tried to do to clear things up.
* Turn off email and web server.
* Remove all scripts from /var/spool/imap/dovecot/sieve-scripts/
* Remove all scripts and vacationIndex.db from /Library/Emailrules/
* Turn on email and web server.
When I return to the user's vacationnotice wiki page it shows the old outgoing email rule. I cannot find where this old rule is stored. When I apply the new rule when a user sends a message to the account they initially receive two vacation replys, the correct one and the 'old' incorrect one as well. Subsequent test messages get a reply of the 'old' message repeatedly, while the new one is properly 'muted' until the following day.
Does anyone know what I'm missing and how to find this zombie message?
Thanks in advance.

Nothing?
These forums used to be pretty active with a few experts chiming in, but it seems like the enthusiastic pros have left the scene.
Outside of Apple's mailing lists what forums are active for pro OS X Server admins? Seems like afp548 is dead, too.

Similar Messages

  • Does group messaging use up mobile data?

    My family and I were group messaging earlier and I noticed that just before I got a message my LTE transfer lights would flicker. I know thathat group messaging uses MMS instead of SMS but was not sure if it counted. I am on android but everyone else has an iPhone using iMessage. I don't want to gorder using up my data but we like to group chat. Any info would be appreciated
    Thanks,
    Cam

    That is correct. Keep in mind if you do not have unlimited texting, you may want to monitor your usage.
    When group texting, you get charged for 1 text for each of the recipients of a group text. You send a group text to 10 people, you will be charged for 10 texts.

  • Step using old measurement data

    I have a strange problem.
    I have a test sequence which runs correctly for several previous steps, using VI's
    Then it comes to 2 steps test (multi numeric) which calls the same VI (once in each step), output of VI is a 12 element numeric array.
    Now these steps are failing because the measurement used seems to be old data (i.e. the first step is using the measurement from that VI from the last sequence run, and the second step is using measurement from the previous step)
    I know the VI is returning the correct data, beacuse i put in a break point & watched it.
    And i know that VI data is initialised before returning the measurement.
    Its really crazy. None of the previous steps using other VI show this problem. And i can call the VI in question manually and it returns correct data.
    Any ideas?
    Labview 2010, TestStand 2010

    If you are using the same VI's on different steps and dont unload the step after its completed, this willl mean your VI stays in memory and any values on controls and indicators will remain from previous calls unless ofcourse you pass new data on the all the controls, or initialise any unused controls. Like wise on indicators make sure you initialise these, so for instance if you dont empty the output array or completely over write the indicator with the same number of elements as in previous calls you may see old data pass back to Teststand.
    Do you pass the error cluster out, maybe you are getting a error and if you are not passing this back to teststand maybe you are seeing old data because of an unseen error.
    Just a couple of thought.
    Regards
    Ray Farmer

  • Message handling for incorrect data

    Hi Guru's,
    In my WebDynPro form, I have one input field. When the user enters a value and click submit, the details are populated in a table based on RFC call.
    I want to perform an error handling which will return an error message (via message manager) when the user enters a wrong value and click submit. In other words, if the user leave the field empty or enters a wrong value in te field and click submit, teh error message gets triggered.
    How can i do this?
    Thanks

    Hi Syed,
    Assuming that the value entered in the inputfield is passed as a parameter to the RFC call, In the action method associated with the button write following code.
    Say,
    inputField context attribute = name
    action name = Submit
    if(wdThis.wdContext.CurrentContextElement.getname == null)
      wdComponentAPI.getMessageManager.reportException("<error message>",true);
    else
      // call your rfc and execute
      // assuming that your rfc return a boolean value as the response for input
      // true for correct input anf false for wrong input
      if(!result)
         wdComponentAPI.getMessageManager.reportException("<error message>",true);
      else
      {// navigate to the next view}
    Hope this helps you

  • I have Old Firefox Data folder before i formated my laptop . but i just cant find how to use this folder for my new firefox to regain all the bookmarks i had.

    I had some issue with my Firefox (it crashes when i starts), so i format my laptop to factory setting and now i got new Firefox installed and left with this Old Firefox Data folder.
    my question is :
    Ii understand the profile in my Old Firefox Data contains my Bookmarks and information i previously had before i formatted, i just do not know how to apply this Old Firefox Data to my new Firefox to get what i need.
    How do i use Old Firefox Data to restore all my bookmarks and information?

    You can move some files from the "Old Firefox Data" folder to the current Firefox profile folder.
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    You can use this button to go to the Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    It is best to only copy what you need and avoid copying the full profile content.

  • Firefox always says using old version even after running the upgrade programme. Even after uninstalling & reinstalling? Why?

    Every time I open Firefox the message "using old version" appears I have tried uninstalling the program and then reinstalling but no change, When I use Firefox as my browser a message appears to say you are using an old version of Firefox. This is just fustrating what can I do to correct?

    Try resetting your User Agent:
    *[https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent Reset your user agent]
    *[http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default Resetting your useragent string to its compiled-in default (Mozillazine)]
    *What is a User Agent: http://en.wikipedia.org/wiki/User_Agent
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Changed my ID but the Iphone 4 continue with the old ID name and does not syncronize. How can I change it in my Iphone so I can continue to use all my data stored like contacts and notes?

    Changed my ID but the Iphone 4 continue with the old ID name and does not syncronize. How can I change it in my Iphone so I can continue to use all my data stored like contacts and notes?

    Do you mean through iCloud?  You need to go to settings > iCloud and "delete account" and then sign in with the newly named account.  You'll want to do similar for facetime, messages, and store.

  • "Message is used to carry data between the BlackBerry handheld and an associated server"

     Hi everyone,
    I'm a first time poster!
    I've been receiving about a 100 of these emails everyday for over a week now!  
    Bell mobility and Bell ISP both say it's not their issue or problem to fix and told me to contact the other!  
    The e-mails are orginating from:
    [email protected]
    Any suggestions?
    Please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    This message is used to carry data between the BlackBerry handheld and an
    associated server. Please do not delete, move or respond to this message - it
    will be processed by the server.
    BEGINETP 116
    AdxV+90AAAAAIBAIMzAzQUM3MUQgGWZyaXp6ZWxsQHBlaS5zeW1wYXRpY28uY2EAI/HrYFAF
    Q01JTUUDQICAgIAyAAAwOENGOEQ3NkIrRysxALbQEVSv1zvyA8fJF15bAW0AGb/C87pyXKXe
    k+KxQN/Inek!
    ENDETP 70196029
    Message Edited by Frazzledazzle on 09-17-2009 11:44 AM

    HI and Welcome to the forums!
    Here are several KB's that discuss the issue...hopefully one of them has what you need:
    KB04254 Network@etp email messages arrive on the BlackBerry smartphone
    KB10289 What is a Network@etp message
    KB13551 Receiving both email messages and network@etp email messages on the BlackBerry Smartphone
    KB12643 ETP messages are not deleted from the Inbox after delivery to the BlackBerry smartphone
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • What message type to use for syndicating data back to R3 from XI

    What message type to use for syndicating data back to R3 from XI. It gives a Message type IDOC error code 51.

    Hi Rehman,
    You are getting error 51 which means "Error: Application document not posted".
    This might because of two reasons:
    1. Your IDoc doesn't contains all the mandatory fields required by the inbound function module to post the IDoc.
    2. You have assigned wrong inbound function module to post the IDoc.
    Please check these cases.
    Hope this will help you.
    Thanks,
    Shiv Prashant Dixit

  • This message is used to carry data between the BlackBerry handheld and an associated server.........

    Hi everyone,
    I am having issues with a couple of BlackBerry's, where they are receiving a message on their phone saying:
     "This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server."
    Email is from "[email protected]"
    This has only appeared since installing the BlackBerry Desktop Software version 6.
    We have used the link below which resolved the issue on one of the BlackBerry's but on the other neither of the options are there.
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04254&sliceId=SAL_Pub...
    The link I have just posted references to version 5, just wondered if anyone knows how to resolve it in version 6 or some other option. Original email is still received fine but want to stop the other email about "This message is used to carry data between.......".
    Thanks in Advance.
    Kevin

    An alternative, if you cannot stop it via the two recommended fixes, is to send those messages to your jiunk folder at the email server level so that they never reach your BlackBerry...
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.

    I have a client with a BlackBerry Pearl 8110. It was (is) configured to receive email from a Microsoft Exchange Server via his Outlook account.  I have uninstalled the Desktop Manager and re-installed ensuring the computer transmits his email via the Re-Director. All settings in the Desktop Manager are correct. The phone was working fine for over 5 years. Now he is getting emails both on his phone and in Outlook saying:
    This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
    I have verified that his phone is not attempting to perform the Enterprise Activation process by checking :
    Options > Advanced Options > Enterprise Activation.
    He does however have a Service Book entitled "CMIME"
    How can I resolve this issue?

    Is the user needing the Redirector service?
    Step 1: If you're not using Redirector or Enterprise, you should uninstall Desktop Manager and then reinstall it using the BlackBerry Internet Service option.
    Step 2: On your device, go to: Options > Advanced > Service Book, and delete all service books for [Desktop]
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Incorrect data returned when using a date prompt

    We are using BO XI R3.1 with fix pack 1.3 on windows with a CMS and report database on Oracle 11i. There is one report in which a date range is set by prompting for the Start and End date, depending on the dates entered it sometimes erroneously displays the message `No data to fetch`.  It can be confirmed that there is actual data rows, by either running the SQL script in an application such as Toad or by hard-coding the start and end dates into the condition, indicating that it is the `Prompt` which is causing the problem.
    For example if the start and end dates are 28/06/2010 - 02/07/2010 there will be no data returned, but if the end date is extended to 30/07/2010 then data will be returned which includes transactions from 28/06/2010 - 02/07/2010.  Whether the date range is set using the SQL `between`  operator  or  using the start date greater than or equal and end date less than or equal results in the same `no data to fetch` message displayed.
    Is this a known issue or have other users come across this behaviour in their desktopIntelligence reports ?. It may be that it is fixed in subsequent service packs but for the time being our environment cannot upgrade beyond the existing fix pack. This problem can also be replicated on new reports and even on other date fields in the database, and if the prompt is incorporated into the Universe the problem still remains.
    Meanwhile any thoughts or ideas on the problem are appreciated.
    Edited by: Peter Gibbs on Jul 26, 2010 1:14 PM

    Hi Peter,
    I've noticed similar behaviour in the past, and it had to do with a difference in language setting between client and server side.
    So let's say dutch client, american oracle.
    So oracle expects MM/DD/YYYY whereas the users think they must input DD/MM/YYYY.
    Now happens something that I consider BO being to clever for its own good.
    If a user enter 28/06/2010 it knows that can't have been MM/DD/YYYY since it is invalid that way,
    so it swaps it! and gives 06/28/2010 to the database.
    A date like 02/07/2010 doesn't get swapped because its valid,
    so it gives 02/07/2010 to the database.
    So ultimately the database tries to retrieve between Jun 28th and Feb 7th, which gives no data to fetch...
    Thats why in situations with different date formats I never use a data field to prompt,
    but request the data in a certain format as string and convert it myself in the universe to a dateformat for the database to process. I just state the expected input format to the user so there are no surprises anymore.
    Something like "Give date from (ddmmyyyy)"...
    Hope this helps,
    Marianne

  • I am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...can u pls adv how to access data?

    i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?

    i am tryin to access old macbookpro harddisk on macbook air,when i connect it via usb i see the folders,but i dont see any files e.g. my saved photos,movies,docs are not there,its shows that 220gb is used,but no data is visible...all folder are empty.......can someone pls adv how to access data?

  • When using restart firefox you get a folder on the desktop called old firefox data i need to know how to use this folder to get my old firefox preferences back

    i've recently reformatted my computer and i've taken the old firefox folder from before the reformat and put it on the new one but i dont know how to use it to restore my old settings
    by the way im not using a different operating system im running windows 7 like i was previously

    Here's my suggested profile resurrection procedure using the old profile folder that's inside the Old Firefox Data folder.
    '''Overview'''
    These are the steps:
    # Create a new Firefox profile
    # Remove everything from that new profile folder
    # Copy in everything from the old profile folder
    '''Create a new Firefox profile (Windows)'''
    Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
    firefox.exe -P
    ''Note: Any time you want to switch profiles, exit Firefox and return to this dialog.''
    Click the Create Profile button and skip the option to change the folder location. Then select that new profile in the dialog and start Firefox.
    '''Open the New Profile folder in Windows Explorer'''
    Firefox in the new profile should look like a factory fresh installation. Open the Troubleshooting Information page using either:
    * "3-bar" menu button > "?" button > Troubleshooting Information
    * Help menu > Troubleshooting Information
    In the first table, click the "Show Folder" button. Firefox will launch your brand new profile folder in Windows Explorer.
    Leaving this folder open, switch back to Firefox, and Exit. This will leave that profile folder open in Windows Explorer.
    '''Copy Old Data in Place of New'''
    In that new profile folder, select all the contents and delete.
    Leaving that window open, open or switch over to your Old Firefox Data folder. Drill down into your old profile folder. At this level you should see a folder named bookmarkbackups among other things.
    Select everything (Ctrl+a) and Copy (either right-click > Copy or Ctrl+c).
    Switch to the empty new profile folder in other window and Paste (either right-click > Paste or Ctrl+v). This may take a minute since some of the files are large.
    '''Start Firefox'''
    Firefox should start up in that new profile with the resurrected old profile data. Success?

  • SSAS Default Member Causing incorrect data in Excel Pivot Table using Multi-select in filter

    I have an Excel 2013 pivot table connected to an SSAS (2012) cube. One of my dimensions has a default member specified. When I drop this dimension in the filter area of my pivot table and select multiple members including the default member then
    only data for the default member is shown. Selecting multiple members where the default member is not included does not result in an issue.
    I believe this may be in an issue in how Excel builds the MDX but wanted to see if there are any work arounds.
    This issue can be recreated using AdvetureWorks using the following steps:
    Alter the Product Dimension of the SSAS Default Member by setting the default member of the Product Line Attribute to Mountain: [Product].[Product Line]&[M] 
    Process the cube
    Connect to the cube via Excel 2013
    Drag internet gross profit to the Values area (The value will be 4700437.22 which reflects the Mountain default filter)
    Drag Product Model Lines to the Filters area (you will see Mountain selected by default)
    Change the filter by checking the Select Multiple Items checkbox and checking Mountain and Road (You will see that the amount does not change)
    Change the filter again by selecting Road only (to demonstrate that Road has a value, 5602105.8, associated with it)
    Change the filter again to select Road and Touring (to demonstrate that the correct aggregation of the two selected members is preformed)

    Hi Hirmando,
    According to your description, the default member cause incorrect data when dragging a attribute that contain a default member to the FILTERS area, right?
    I can reproduce this issue on my environment, when dropping this dimension in the filter area of my pivot table and select multiple members including the default member then only data for the default member is shown. Currently, it's hard to say the root
    reason that cause this issue. In order to narrow down this issue, please apply the latest server pack and cumulative update.
    Besides, you can submit a feedback at
    http://connect.microsoft.com/SQLServer/Feedback So that microsoft will confirm if this is a know issue.
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

Maybe you are looking for