Vacation Notice replies more frequently? Is this possible?
In Snow Leopard Server 10.6.3, Does anyone know of a way to change how often a Vacation Notice is triggered? As far as I know it is only once a day per sender. Is there a way to change it to refresh every hour?
Thanks!
Hi Soundtrack_IT,
Quick answer: Once per day is the highest frequency you can set per RFC 5230 4.1.
+4.1. Days Parameter+
+The ":days" argument is used to specify the period in which addresses+
+are kept and are not responded to, and is always specified in days.+
+The minimum value used for this parameter is normally 1. Sites MAY+
+define a different minimum value as long as the minimum is greater+
+than 0. Sites MAY also define a maximum days value, which MUST be+
+greater than 7, and SHOULD be greater than 30.+
+If ":days" is omitted, the default value is either 7 or the minimum+
+value (as defined above), whichever is greater.+
If you wish to decrease the frequency for new Vacation Notices, you would edit this line:
sievefileVacationNotice = u"""vacation :days 1 :addresses [%(addresses)s] :subject "%(subject)s" "%(message)s";"""
In this file:
/usr/share/emailrules/lib/python/EmailRules.py
Hope this helps,
Boddie
Similar Messages
-
Tracking threads with zero replies... is this possible?
Is it possible to search across forums for threads with zero replies? If not, perhaps this is one more for the new features request.
stuartu wrote:
Is it possible to search across forums for threads with zero replies? If not, perhaps this is one more for the new features request.I don't think the Jive forum software has much support any more, so I don't fancy your chances of getting such a new feature. -
I love the feature to pin as app tab on my toolbar. When I first began using this feature, after about a month the toolbar would drop all my apps. I would have to re-add as I used the websites again. Some of my sites I would add because I didn't use them enough to remember them all the time and this was a big help from having to search for a sight all over again. Am I doing something to cause these apps to be dropped? It seems to be happening more frequently now, like every couple weeks. It is annoying to have to keep going back and pinning these sites as app all over again.
Tks Turingtest2,
That gives me something to think about.
Let me tell you a little more of the puzzle which I should have added originally!
I have about 60 podcasts. So I want to group those podcasts that I need to download everyday into one "collection" - then at the begiining of the day, I look at the "Every Day" collection of podcasts and then manually down load them. This way I do not have to look at the other 40 podcasts which are weekly or Monthly podcasts.
Your script idea will help me with another problem I have (tks!) but I dont think it wil help with this problem!
I really want to assign something at the "header" level - ie the actual podcast name, rather than the individual daily or weekly or monthly podcasts which is how your script works.
I think I have found a possible fix by assigning a code (ie "weekly") in the "Composer" field of the podcast and then showing "Composer" in the column browser and then selecting all the weekly ones etc etc.
I will test this!
Tks again! -
Possible with more frequent version updates?
Hi, would be great if I have Pages make more frequent version updates. Anybody knows whether this is possible?
For the 100th time, I repeat that you are in a users forum.
If you want to ask something to Apple you must use the dedicated channel.
Go to "Provide Pages Feedback" in the "Pages" menu , describe what you wish.
Then, cross your fingers, and wait at least for iWork'11 or 12 ;-)
During the last weeks, Apple engineers were busy upon iWork for iOS.
They added to this set of apps a lot of features of the OSX versions which were missing.
As the result of their job was released yesterdays, we may hope that they will work upon iWork for OSX and deliver soon an "iCloud aware" set of applications.
But honestly, I have no hope for other important changes before january 2012.
Yvan KOENIG (VALLAURIS, France) jeudi 13 octobre 2011 21:30:20
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
My MacBook Pro screen keeps going black. This is happening more frequently. I have had it in to the Apple store several times for this and they can't find anything wrong other than it is locked up for a while. Since it is happening more and more, I am worried that at some point this will be permanent.
Has it actually happened at the store?
If not then we need to get it to do that. Now it may be completely random but you need to try and make a note of as many things as possible that happen when it does it.
How long has it been on for, what are you doing at the time, what's connected. If it's reproducible then you've at least got somewhere. -
This box pops up more and more frequently, and sometimes completely ties up my computer.
If I knew any more to tell you, I could probably fix it myself!In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
On my mac I have both Quicktime X and Quicktime 7 pro. Both applications seem to be crashing quite often lately. This happens when playing all files types. I notice it more with .flv file. It usually happens when i grab the time slider bar and try to move it. The apps will freeze and I have to "force quit" to get them to close. Sometimes putting the computer to sleep and waking it up helps. Is there a way to remedy this?
Oops, I needed to update my profile. I have snow leopard now
-
I need to retrieve a series of very old (more than 1 year old) text messages from my iPhone 4S. Is this possible?
If the text is still on the phone and wasn't deleted, I don't see why not. Probably easiest to use an app like TouchCopy (Mac and PC) or PhoneView (Mac), rather than looking through things on the phone itself.
-
I bought iMac 27 quad core i7 last June. Last month i have noticed lots of dark patches on the screen and now they are growing more. i bought this from US but now i have moved to Kuwait. How much it cost to replace the screen?
Mac and Mac models are picky about the RAM the Mac needs to see and use.
As you have found out, the 1067 speed RAM will not work in your year and model iMac.
You need the 1333 speed RAM.
If, you can return the RAM for a refund, do it!
If not, try online Mac RAM source and seller Crucial memory. They have a table that matches your Mac to the correct and reliable RAM. You may need to contact them to see whether or not they ship to South Africa, though.
If Crucial dpesn't work out, here's the specs for your year and model iMac that you need to seek out and purchase.
Maximum Memory
32 GB (Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
Good Luck! -
I am considering buying Acrobat 11 Prio on a monthly subscription but I would like to use it on more than one machine is this possible?
You are allowed to have two working installations so if you want to have it on two machines you can. If you want it on more than that then you need to manage which ones are working at any given time such that only two are usable.
-
My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays thru my radio and system.
That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod -
Instead of copying images (jpgs, etc) from my iPad Mini to my desktop PC, I'd like to do the opposite, that is, copy existing images from my PC files to my Mini without going through a multi-email process which involves resizing the images by experiment.
I hope someday Adobe Lightroom can add this feature, but I'll settle for some simple transfer, perhaps by cable between my PC and my Mini.
Jim MohundroYou can do it via your computer's iTunes. If you are on iTunes 11 on your computer then you may want to re-enable the left-hand sidebar via View > Show Sidebar (option-command-S on a Mac, control-S on a PC), which might make it easier to navigate and my instructions may make more sense.
To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos -
I Need to Return Two values or more from Function, Is this possible?
Below is the offending query, I am trying to pass v_bu and v_po to this function, and after validations then return v_count and v_action is this possible in a function? I am having problem returning two values.
see below code
function po_edi_func(v_bu purchase_order.business_unit_id%type,
v_po purchase_order.purchase_order_number%type)
return number as pragma autonomous_transaction;
v_count number;
v_ctdel number;
v_action varchar2(1);
begin
select count(*)
into v_count
from sewn.purchase_order
where business_unit_id=v_bu
and purchase_order_number =v_po;
if v_count > 0 then
select count(*)
into v_ctdel
from sewn.purchase_order
where business_unit_id=v_bu
and purchase_order_number =v_po
and purc_orde_status = 1;
if v_count <> v_ctdel then -- ALl PO's Cancelled--
v_action := 'U'; -- - NOT ALL PO DELETED --
else
v_action := 'D'; -- DELETED ALL PO--
end if;
else
v_action := 'I';-- New PO INSERT--
end if;
commit;
return v_count;
end;Paul,
This is becoming a nightmare to me, can you look at the below and tell me where I am having a problem
This is the Function below
CREATE OR REPLACE function po_edi_func(v_bu sewn.purchase_order.business_unit_id%type,
v_po sewn.purchase_order.purchase_order_number%type,v_action_out OUT VARCHAR2)
return number as pragma autonomous_transaction;
v_count number;
v_ctdel number;
v_action varchar2(1);
begin
select count(*)
into v_count
from sewn.purchase_order
where business_unit_id=v_bu
and purchase_order_number =v_po;
if v_count > 0 then
select count(*)
into v_ctdel
from sewn.purchase_order
where business_unit_id=v_bu
and purchase_order_number =v_po
and purc_orde_status = 1;
if v_count <> v_ctdel then -- ALl PO's Cancelled--
v_action := 'U'; -- - NOT ALL PO DELETED --
else
v_action := 'D'; -- DELETED ALL PO--
end if;
else
v_action := 'I';-- New PO INSERT--
end if;
commit;
v_action_out := (lpad(v_count,8,'0')||lpad(v_action,1,' '));
return v_action_out;
end;
and this is how I am calling it from my trigger which has to pass the v_bu and v_po values to be used in extracting data and returning the records
see below
if po_edi_func(v_bu,v_po) <> '' then;
v_count:= (substr(v_action,1,8));
v_action := substr(v_actione,9,1);
else
v_count:=0;
v_action := 'I';
end if;
I need the extracted values of v_count and v_action for my app to reset some values -
Increasing TLA size causes more frequent YC gc
hi,
i'm running the latest JRockit with 4GB heap size, 500MB nursery and TLA of 8MB gencon strategy.
What I've noticed is that although garbage collection (young collection) pauses became shorter, their frquency increased siginificantly (almost every second). Previously while running default JRockit settings my pause times were ~200ms every 5s. I assumed that increasing TLA should at least make YC not so frequent.
How should I use TLA sizing from practical point of view (i've read documentation x-times) What would be reasonable YC frequency and pause times? Is there any document where I could find achievable by JRockit pause times and YC, OC frequency? I understand that this will depend on a type of application, allocated objects etc.. but still I'd appreciate any hints. By the way most of my allocated objects are of the same size.It is quite difficult to give any exact numbers on what reasonable YC frequencies or pause times are. As you say, it depends a lot on what the application is doing. However, it is of course possible to try to tune JRockit to behave more closely to the behavior that you would like.
From what you write I am not sure what type of behavior you would like. Are you looking for short pause times because your application suffers when there are long pauses, or are you looking for less GC-time to get more throughput (more execution time)? The difference is that you can either get more frequent but shorter pauses or less frequent but longer pauses.
A short background on TLA-sizing:
A TLA is a chunk of memory where a thread can do fast object allocation. Only objects that are small enough to fit in the TLA can be allocated there. This means that increasing the TLA size allows you to allocate larger objects in the TLAs. On the other hand, if you are using a nursery, all TLAs come from the nursery. This means that you can get fewer TLAs from the same sized nursery if you use a larger TLA size. Also, threads that don't allocate much get the same TLAs as other threads, which potentially wastes memory if they can not fill the TLAs.
In your case you get 500/8 = 62 TLAs from your nursery as opposed to 500/0.256 = 1953 TLAs if you would have used the default value (256k) for TLA size.
So, a large TLA size may mean that you can allocate larger object in TLAs (and thus in the nursery as opposed to in old space) but it may also increase the YC frequency.
You mention that all of you objects are about the same size. What size is that? I think it would be wise to make sure that the TLA size is large enough to fit those object in, but the TLA size should not be too large.
My feeling is that 8 MB is quite a large size for TLAs. There is a way to specify a range for the TLA size. You can set a minimum value and a preferred size. This allows for more dynamic (and hopefully more efficient) TLA sizing.
-XXtlaZize:min=2k,preferred=256k
I would suggest setting the min value to make sure that your objects fit in TLAs and then experiment with the preferred size a bit. -
It is beginning to shutdown with no warning more frequently. What can I do to locate the exact issue? My warranty has expired so I would like to get to the bottom of it without taking it in to an apple store.
I am currently learning how to do diagnostics on mac hardware but I am not a native mac user. It is unlikely that this is a software issue. Please, any input will be helpful.Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
Maybe you are looking for
-
I was going about the process to set up the 32-bit chroot so I could use Adobe Acrobat on my system, but systemctl failed to start the service. Output of "systemctl status arch32.service" is as follows: Loaded: loaded (/etc/systemd/system/arch32.serv
-
Film rolls and photo dates out of whack
I opened my iPhoto ver. 5.04 the other day and noticed that thousands of pictures were absent. After doing a search here I tried rebuilding the library (using the option+command buttons at startup). While the rebuild returned the photos into iPhoto,
-
Find exact string using formula (excel)
I'm trying to use FIND statement to find multiple strings in the context of a larger formula. The original formula I'm basing it off of is as follows: =IF(ISNUMBER(FIND("INC",A1))," ","Y") Obviously, this yields a Y if it finds whatever text in " ".
-
Pages Palette constantly redraws.
Using CC 2014 with a photo heavy layout of 56 pages. EVERY TIME I go to a new page the pages palette redraws and hangs ID until it is complete. If I make even a minor move, it redraws and nothing happens until it is complete. I can't even change to a
-
Why is gmail not working when I try to set up in Mail?
I cannot set up my mail account. i try to set it up but when I enter my information, it says: Logging in to the Gmail IMAP server "imap.gmail.com" failed. Make sure the user name and password you entered are correct, then click Continue. If the infor