Val.type doesnt match with PO STO 351
dear all,
i'm a newbie need some help
How is make linked val.type in MIGO GI mov.type 351 with val.type in PO STO until not a different val.type that transfered . Cause the user often do mistake.
tk.
edo
hai BSk
i'm sorry about that....
anyway..
thank u
edi
Similar Messages
-
Slected no of records doesnt match with the no of records transferred
Hai BI EXPERTS
SINCE FROM LONG THE DATA PACKET IS RED IN COLOUR WITH THE ERROR MESSAGE 'SELECTED NO RANGES DOESNT MATCH WITH NO OF RECORDS TRANSFERRED'
PLS EARLY ANSWERS=HIGH POINTSHello,
check for IDOC's in BD87 and just see if any thing is pending or not...
if yes then execute them manually.
Also check SM58 and is some LUW are waiting process them manully if possible.
Also try to see the job log in the spource system in SM37 for the user ALEREMOTE and go inside each job and check the one for your data source...and check where it is stuck.
also check for teh system connection and try to see if the jobs are running for other data source.
Also check if the job in BW is running in SM37 for this data load or not.
You can try to cancel all the jobs in BW...turn the total status of the request to RED and then delete it and execute the infopackage..it will ask for repeat and you can repeat the load.
If DTP then just schedule the DTP after deleting gthe request.
Thanks
Ajeet -
Line Order No doesnt match with Invoice line number
At the line level , the line order no doesnt match with the invocie line number
ie. say for example in a sales order we have 3 lines
1. A
2. B
3. C
where as in transaction at AR level the line no is different
1. B
2. A
3. C
the customer wants in AR also the line no should be same as sales order line nos
Please help us what is the setup where we define the line level numbering in AR.
I have checked the line ordering rules but i am not clearly understanding, if anyone can explain with an example how this no generates witht he setup details it would be greatThis can be done in XSL OR in procedure on the DB side. Performance wise better to do in procedure as mentioned by other use. You can choose to go with DB or XSL approach depending on number of orders you are expecting in a single message. If it is going to be 100s or few thousand messages then keeping it in XSL is not a problem. But if you are planning tens or hundreds of thousands of orders in the same request then better do it in stored procedure.
How do you do in XSL?
1. Put a for each on every unique order no. You can use xsl:Key or xslt:distinct-values() for this.
2. Within for each unique value of order no, use position() function to pass line/order no as 1,2,3... etc. As soon as the loop moves to second iteration for the next unique order no, count will automatically start again from 1,2,3... and so on.
Apart from slightly slower processing time, another drawback from this approach is that the data in the XML you send to DB procedure will be sorted by order numbers. All orders with same number will appear together.
Another problem with this approach is that this will work only within one request, i.e. if the next request contains an order with same no which was already sent in a previous request, for this order the count will again start from 1. So if you want to keep the sequencing maintained across multiple requests, the easiest way to do is in the DB procedure where you can lookup in the table before inserting a new row and insert with next sequence of that order no. -
I'm trying to upload the new itunes version because The older one doesnt match with the iphone 5. At one step it is required one code to allow the installation but as It is not the itunes code which one is it ?
Hello, GwladysPa.
Thank you for visiting Apple Support Communities.
I believe that the iTunes update is requesting your computer's administrator password to update the application. Here is the article that explains this process.
Mac OS X: Software installations require administrator password
http://support.apple.com/kb/HT2558
Cheers,
Jason H. -
ME 51N Error msg order type doent match with account assignment.
Hi,
When I Execute ME 51N am facing an error ": For order type ZTWA ,Please use account assignment T"
Here my issue is whenever I press back ,Exit etc its promoting the same error i couldn't go back or exit the transaction.
One more thing i have enhanced ME51N using BADI - ZMMEI_PTP15_SERVICE.
Thanks in advanceNo idea what this application is but it's not Crystal Reports. If it's classic SAP product then post your question in one those forums. If it's a third party application please contact their support for assistance.
-
WCF WSDL shoud match with the JAVA WSDL
Hi All,
I have a requirement where I have the JAVA WSDL which was successfully ported to .net 4.5 as server interface. While I try to run the services by implementing the interface the WSDL output from .net doesnt match with the java wsdl.
Can somebody say whether its possible? or is there any work around for this.
For example
Java WSDL
<message name="submit">
But .NET WSDL
<wsdl:message name="ISubmitServiceSoap_submit_OutputMessage">
thanks,It is not possible.
WCF WSDL and JAVA WSDL has his own rule for the services, so they shoule be hard for match. But we can use the svcutil.exe(https://msdn.microsoft.com/en-us/library/aa347733(v=vs.110).aspx)
to generate proxy code and config file. -
Getting error when view - Requested data type does not match with existing
I have the siebel web service
In the BI publisher as mentioned in the 'Siebel_BI_Publisher_Integration_Concepts.pdf', I have imported the siebel web service
BI can recognize the 'Web service' and methods.
I have created the paramters. The data type is 'String'
When I try to view the report using the BI publisher, I am getting teh following error in th UI
"Requested data type does not match with existing data type"
This is the first time I am using BI publisher to call the Siebel web service. I don't know what this error means
I don't know whether any log file generated wit the details of this erro message
Any help is much appriciated
Thanks,
KavithaHi all,
have you find a fix for this issue? Im facing the same situation, using Complex type, and String data type both in the service and Bi publisher. We are consuming CC&B services, and we have noticed this error appears when BIPublisher is running on WebLogic (10.3) but it does not appear when BIPublisher is running on OC4J , of course running the same report on both application servers.
Any idea?
Thanks a lot, regards
Nestor -
I keep getting an error that my billing info for my card doesnt match my bank info, but it does. Nothing has ever been changed. I called my bank, the card company, and all are exactly the same, word for word as my billing info in iTunes.
In fact, every time I get the error code that billing doesnt match, my card gets charged a $1.00 authorization fee. It later falls off, but it shows my card is being billed when they say they cant verify billing info.
I called Apple support and they want to charge me to get their crap together.
I need to do some updates and by a couple apps for work and am about ready to go to ANdroid if I cant get it fixed.
$##@@$%%$##$%%$$%$!!!!!!!!!!!If you're in the US, this is usually caused by the simple fact that what the Postal Service shows as your address does not match what you're entering. Go here & see:
https://tools.usps.com/go/ZipLookupAction!input.action -
Printshop Pantone color doesnt match mine?
Hello all,
I sent an ai file into a screen printer who returned to me a mockup of what it will look like on the bag.
Problem is that the blue they are showing doesnt match at all the blue i sent in.
the logo uses a PMS 298 and they have listed in their mockup PMS 298 as well.
I have eliminated the possiblity that our monitors are displaying radically different and other than that I just cant explain the drastic difference between colors.
Anyone ever run into this sort of problem?This is pretty common. The only way you will be able to see a mockup is when they go on press. Most screen printers use plastisol inks and they custom mix them to come close to the PMS 298; but there is no Plastisol Pantone 298 like offset printers can order for a Spot color. So, you have to either have them make the screen and actually print a sample using the Plastisol mix ( usually a medium Blue and White mix ) and they send it to you FedEx or you approve whatever it is they sent to you. But, if you do the latter, they will not have to match the 298. You should definitely arrange for a press approval the day they ink up the job. At a minimum, you can have them send you an actual flat stock sample ( minimum of 3 ) of their actual ink mix that's been put through the dryer. Then, you can decide which mix comes closest to your 298. This all really has nothing to do with CMYK or what type of JPG they sent you. It goes much further in terms of accuracy and getting your money's worth. If the screen shop has a hotshot ink mixer, you've got nothing to worry about. But, definitely get ahold of them and see what they can deliver in terms of an actual ink sample. Plastisol has a few Blues to choose from and may have a standard Blue that comes close to 298. Another question to ask them.
-
Reg: PLS-00418: array bind type must match PL/SQL table row type error
I am trying to access a table of records through JDBC OracleCallableStatement. I am able to do it fine for all mappings except for the ones below
TYPE CAT_CD_TYPE IS TABLE OF A.B %TYPE INDEX BY BINARY_INTEGER;
TYPE ORG_CD_TYPE IS TABLE OF C.D %TYPE INDEX BY BINARY_INTEGER;
Column B is CHAR(1) and Column D is CHAR(2). I am trying to register the out parameters of Oraclecallablestatement as
cstmt.registerIndexTableOutParameter(2, 2000, OracleTypes.CHAR, 0);
cstmt.registerIndexTableOutParameter(3, 2000, OracleTypes.CHAR, 0);
All the other mappings work fine. These two fail with the error
SQLException in invokeDBPackage() : ORA-06550: line 1, column 32:
PLS-00418: array bind type must match PL/SQL table row type
ORA-06550: line 1, column 35:
PLS-00418: array bind type must match PL/SQL table row type
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
I tried other OracleTypes mappings too but no luck so far.
Any advice on this would be greatly appreciated.Hi,
I'm not sure it's reasonable to expect someone to sift through that much stuff.
Which parameter is it having a problem with?
Can you modify the following to reproduce the behavior?
Thanks
Greg
create package mypack5 as
TYPE v2array is table of emp.ename%type index by BINARY_INTEGER;
PROCEDURE test_it(thearray IN v2array, numrecs out number);
END;
CREATE or replace PACKAGE BODY MYPACK5 AS
PROCEDURE test_it(thearray IN v2array, numrecs out number)
IS
begin
numrecs := thearray.count;
END;
END;
using System;
using System.Data;
using Oracle.DataAccess.Client;
public class indexby
public static void Main()
OracleConnection con = new OracleConnection("data source=orcl;user id=scott;password=tiger;");
con.Open();
OracleCommand cmd = new OracleCommand("mypack5.test_it", con);
cmd.CommandType = CommandType.StoredProcedure;
OracleParameter Param1 = cmd.Parameters.Add("param1", OracleDbType.Varchar2);
Param1.Direction = ParameterDirection.Input;
Param1.CollectionType = OracleCollectionType.PLSQLAssociativeArray;
Param1.Size = 3;
string[] vals = { "foo", "bar", "baz" };
Param1.Value = vals;
OracleParameter Param2 = cmd.Parameters.Add("param2", OracleDbType.Int32, DBNull.Value, ParameterDirection.Output);
cmd.ExecuteNonQuery();
Console.WriteLine("{0} records passed in", Param2.Value);
con.Close();
} -
PLS-00418: array bind type must match PL/SQL table row type
If a PL/SQL table is indexed by CHAR and is a parameter
in a Stored Program, we are not able to call the stored
program from the Java code.
We get the following error code.
java.sql.SQLException: ORA-06550: line 1, column 62:
PLS-00418: array bind type must match PL/SQL table row type
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
But if we change the CHAR into VARCHAR2 then it works.
We are using Oracle9i Enterprise Edition Release 9.2.0.5.0 -64bit Production ,
JServer Release 9.2.0.5.0 - Production
and JDK1.4.
Thanks
Push..Hi,
I'm not sure it's reasonable to expect someone to sift through that much stuff.
Which parameter is it having a problem with?
Can you modify the following to reproduce the behavior?
Thanks
Greg
create package mypack5 as
TYPE v2array is table of emp.ename%type index by BINARY_INTEGER;
PROCEDURE test_it(thearray IN v2array, numrecs out number);
END;
CREATE or replace PACKAGE BODY MYPACK5 AS
PROCEDURE test_it(thearray IN v2array, numrecs out number)
IS
begin
numrecs := thearray.count;
END;
END;
using System;
using System.Data;
using Oracle.DataAccess.Client;
public class indexby
public static void Main()
OracleConnection con = new OracleConnection("data source=orcl;user id=scott;password=tiger;");
con.Open();
OracleCommand cmd = new OracleCommand("mypack5.test_it", con);
cmd.CommandType = CommandType.StoredProcedure;
OracleParameter Param1 = cmd.Parameters.Add("param1", OracleDbType.Varchar2);
Param1.Direction = ParameterDirection.Input;
Param1.CollectionType = OracleCollectionType.PLSQLAssociativeArray;
Param1.Size = 3;
string[] vals = { "foo", "bar", "baz" };
Param1.Value = vals;
OracleParameter Param2 = cmd.Parameters.Add("param2", OracleDbType.Int32, DBNull.Value, ParameterDirection.Output);
cmd.ExecuteNonQuery();
Console.WriteLine("{0} records passed in", Param2.Value);
con.Close();
} -
Receipt Matching with Invoice (AP) - Line to be Checked by Default
Hi,
As per finance requirement, they need line to be checked by default in Match Receipt Window. Is there any option available?
I did personalization for selecting check box value to 'Y' and it is working. But that time it is not taking Qty Invoiced and Match Amount if I use personalization (I need to disable check and enable again to get value). Is there any standard option available? if not, how to fulfill this requirement?
Navigation:
AP Administrator > Invoice > Entry > Invoices
Create Invoice and Save
Click on Matching
Matching Type > Item
Search with PO number or Receipt Number > Find
Thanks,
NavabHi,
As per finance requirement, they need line to be checked by default in Match Receipt Window. Is there any option available?
I did personalization for selecting check box value to 'Y' and it is working. But that time it is not taking Qty Invoiced and Match Amount if I use personalization (I need to disable check and enable again to get value). Is there any standard option available? if not, how to fulfill this requirement?
Navigation:
AP Administrator > Invoice > Entry > Invoices
Create Invoice and Save
Click on Matching
Matching Type > Item
Search with PO number or Receipt Number > Find
Thanks,
Navab -
I just changed my residence to the US and now I cant register my new US credit card on itunes cause the state list doesnt match to the US states, what should I do?
Your credit card info, billing address must be the same country as the iTunes store country you registering.
For example, you can’t have a credit card from a U.S. bank with a U.S. billing address registered in the iTunes store for China.
I tried to change my payment information too, but it happened the same, I can change the information but when I get to the state part, it only shows the other country states
Remove all payment info and save it.
Then change the iTunes store country to U.S., add a U.S. credit card with a U.S. billing address.
As previously suggested, if this does not work, contact iTunes store support.
-> http://www.apple.com/support/itunes/contact/ -
Unable to edit certain fields in order type RE comparing with OR
Dear friend,
When I am creating return order with order type 'RE', I find out there are certain fields that are not editable. However, this issue doesnt happen with standard order(order type 'OR'). please refer to the following snapshot:
where you can see fields such as 'intercom', 'payment term' is eidtiable in order type or, but not in RE. Anybody could tell me why? and what configuration control this screen layout? how to edit this? thanks!
Best Regards
T.PHi Peng,
do you face this only for you ID/few users or for every user these 2 fields are not editable ? you have to check this by asking your colleagues/users .
If it is problem with few users then they have done some authorization check here only for few users.
if it is for all, then as mentioned by Venugopal, some enhancement is done for this to make non editable these fields.
What to you want, do you want to make it editable fields or do you just want to know why it has done ?
Regards
Sundar -
Fetch the netprice from the validity period which always matches with the
Let me describe the same.
Suppose the PO creation date is 04.07.2007
The conditions for an item in a contract for the PO are as follows;
1. Validity from 04.07.2007 validity to 04.07.2007 Netprice = 100.00
2. Validity from 05.07.2007 validity to 31.12.9999 Netprice = 200.00
We need to always fetch the netprice from the validity period which always matches with the PO creation date. here the value 100.00 should be the correct netpr as the PO creation date matches with the first validity period.
But the program is fetching the netprice 200.000 which belongs to the second validity period. That is beacuse the select statement which fetches the data for contracts collects on the basis of EKKO-kdate and ekko-kdtab.the fields kdate and kdtab retrieves the validity period of the contract which is from 04.07.2007 to 31.072007. This data is then used to retrieve the netpr data from EKPO and it fetched 200.00 as it retrives the netprice of current data in contract validity and h not with respect to PO creation date.
This data is then used to fetch the get the netpr data from EKPO.
what we need is the netprice for that validity period of item(Conditions) that matches with the PO creation date..
Below is the code where I'm selecting the data from ekko and ekpo for the contracts data..Can you please add the code snippet to the below attachesd subroutine to get the required data from KONV and KONP so that we can retrieve the correct Netprice.
FORM select_contracts USING p_s_cebeln LIKE s_cebeln[]
p_c_k_bstyp TYPE ebstyp
p_p_bukrs TYPE bukrs
p_p_ekorg TYPE ekorg
p_p_ekgrp TYPE bkgrp
*Begin of Mod-004
fp_p_cernam type ty_r_ernam
p_p_cernam TYPE ernam
*End of Mod-004
p_s_werks LIKE s_werks[]
p_s_matnr LIKE s_matnr[]
p_s_lifnr LIKE s_lifnr[]
p_s_val_dt LIKE s_val_dt[].
*mod-002
data : l_amount type BAPICURR_D, " Net price
l_waers TYPE waers, " Currency Key
l_eff_amount type BAPICURR_D. " Effective value
data: l_v_netpr type bprei.
*mod-002
SELECT ebeln
bukrs
bstyp
aedat
ernam
lifnr
zterm
ekorg
ekgrp
waers
wkurs
kdatb
kdate
inco1
INTO TABLE i_ekko
FROM ekko
WHERE ebeln IN p_s_cebeln
AND bstyp EQ p_c_k_bstyp
AND bukrs EQ p_p_bukrs
AND ekorg EQ p_p_ekorg
AND ekgrp EQ p_p_ekgrp
*Begin of Mod-004
AND ernam EQ p_p_cernam
AND ernam IN fp_p_cernam
*End of Mod-004
AND lifnr IN p_s_lifnr
AND ( kdatb IN p_s_val_dt OR kdate IN p_s_val_dt ).
IF sy-subrc EQ 0.
Populates internal table i_ekpo using EKPO table.
SELECT ebeln
ebelp
loekz
txz01
matnr
werks
ktmng
menge
meins
bprme
netpr
peinh
webaz
mwskz
uebto
untto
erekz
pstyp
knttp
repos
webre
konnr
ktpnr
ean11
effwr
xersy
aedat
prdat
INTO TABLE i_ekpo
FROM ekpo
FOR ALL ENTRIES IN i_ekko
WHERE ebeln = i_ekko-ebeln
and aedat = i_ekko-aedat
AND werks IN p_s_werks
AND matnr IN p_s_matnr.
LOOP AT i_ekpo INTO rec_ekpo.
MOVE rec_ekpo-ebeln TO rec_contr-ebeln.
MOVE rec_ekpo-ebelp TO rec_contr-ebelp.
MOVE rec_ekpo-loekz TO rec_contr-loekz.
MOVE rec_ekpo-txz01 TO rec_contr-txz01.
MOVE rec_ekpo-matnr TO rec_contr-matnr.
MOVE rec_ekpo-werks TO rec_contr-werks.
MOVE rec_ekpo-ktmng TO rec_contr-ktmng.
MOVE rec_ekpo-menge TO rec_contr-menge.
MOVE rec_ekpo-meins TO rec_contr-meins.
MOVE rec_ekpo-bprme TO rec_contr-bprme.
MOVE rec_ekpo-netpr TO rec_contr-netpr.
move l_v_netpr TO rec_contr-netpr.
mod-002
read table i_ekko into rec_ekko with key
ebeln = rec_ekpo-ebeln.
l_waers = rec_ekko-waers.
CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
EXPORTING
currency = l_waers
amount_internal = rec_contr-netpr
IMPORTING
AMOUNT_EXTERNAL = l_amount.
rec_contr-netpr = l_amount.
mod-002
MOVE rec_ekpo-peinh TO rec_contr-peinh.
MOVE rec_ekpo-webaz TO rec_contr-webaz.
MOVE rec_ekpo-mwskz TO rec_contr-mwskz.
MOVE rec_ekpo-uebto TO rec_contr-uebto.
MOVE rec_ekpo-untto TO rec_contr-untto.
MOVE rec_ekpo-erekz TO rec_contr-erekz.
MOVE rec_ekpo-pstyp TO rec_contr-pstyp.
MOVE rec_ekpo-knttp TO rec_contr-knttp.
MOVE rec_ekpo-repos TO rec_contr-repos.
MOVE rec_ekpo-webre TO rec_contr-webre.
MOVE rec_ekpo-konnr TO rec_contr-konnr.
MOVE rec_ekpo-ktpnr TO rec_contr-ktpnr.
MOVE rec_ekpo-ean11 TO rec_contr-ean11.
MOVE rec_ekpo-effwr TO rec_contr-effwr.
mod-002
CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
EXPORTING
currency = l_waers
amount_internal = rec_contr-effwr
IMPORTING
AMOUNT_EXTERNAL = l_eff_amount.
rec_contr-effwr = l_eff_amount.
*mod-002
MOVE rec_ekpo-xersy TO rec_contr-xersy.
APPEND rec_contr TO i_contr.
CLEAR: rec_ekpo,rec_contr.
mod-002
CLEAR : rec_ekko,l_amount, l_eff_amount,l_waers.
mod-002
ENDLOOP.
Modifying i_contr using i_ekko.
SORT i_ekko BY ebeln.
LOOP AT i_contr INTO rec_contr.
READ TABLE i_ekko INTO rec_ekko WITH KEY
ebeln = rec_contr-ebeln
BINARY SEARCH.
MOVE rec_ekko-bukrs TO rec_contr-bukrs.
MOVE rec_ekko-bstyp TO rec_contr-bstyp.
MOVE rec_ekko-aedat TO rec_contr-aedat.
MOVE rec_ekko-ernam TO rec_contr-ernam.
MOVE rec_ekko-lifnr TO rec_contr-lifnr.
MOVE rec_ekko-zterm TO rec_contr-zterm.
MOVE rec_ekko-ekorg TO rec_contr-ekorg.
MOVE rec_ekko-ekgrp TO rec_contr-ekgrp.
MOVE rec_ekko-waers TO rec_contr-waers.
MOVE rec_ekko-wkurs TO rec_contr-wkurs.
MOVE rec_ekko-kdatb TO rec_contr-kdatb.
MOVE rec_ekko-kdate TO rec_contr-kdate.
MOVE rec_ekko-inco1 TO rec_contr-inco1.
MODIFY i_contr FROM rec_contr.
ENDLOOP.
ENDIF.
REFRESH: i_ekko,
i_ekpo.
CLEAR : rec_ekko,
rec_ekpo,
rec_contr.
ENDFORM. "select_contracts
Thanks.Hi,
Please get the valid condition ( based on date ) from A016 (MK & LPA). With the appropriate KNUMH read the Condition header. You can access the different condition items viz., PB00, RA00 etc., for the values from table KONP. Further if you have Value scales / Quantity scales, you can read the data from KONM, KONW.
An additional tips: in KONP, if you have a condition like RA00 - Rebate, the value will be multiplied by 10 and saven in database to accomodate the discount to the third decimal.
I could not completely understand your requirements like nature of development ( Is it a Report / SAP Script ??) you are working etc., so that I could help you precisely.
Hope this helps,
Best Regards, Murugesh AS
Message was edited by:
Murugesh Arcot
Maybe you are looking for
-
How to solve FRM-47023 No Such parameter named P_NAME exists in form
Hello all, When i passing parameters from xxxx to yyyy i got the error message "FRM-47023 No Such parameter named P_NAME exists in form yyyy "..How can i solve this.. In form xxxx I have one button named "view"..I write the following code in "when-bu
-
Can no longer print PDFs in Safari, or open one in Firefox
A couple of days ago I had no trouble printing a PDF which was open in a Safari window. Now when I have a PDF open in Safari and I try to print a page of it, the print window that appears shows a blank page, and if I click Print, the paper comes out
-
ABAP Code in Start Routine for restricing the data records from ODS1 - ODS2
Hi I need small ABAP Code in Start Routine Of Update rules Of ODS . Im in BW 3.5 . I have records like below in first layer ODS and i want to restrict some records while going to second layer ODS .. ODS1 :- DocNO EventType Date 123 001
-
I just moved and am setting up a new apartment. Verizon put in internet service yesterday. I got a network going on my airport extreme but it could not connect to the internet because it says it has no DNS servers. help! What do I do now?
-
Why won't a ebook that I created in ibook author sync in I tunes?
I have created an ibook using ibooks author and have used the preview option to load it onto my ipad. Unfortunately it does not show up in my itunes when I go to sync it so it never syncs with itunes. This is a problem because I would like to give