Validating code question

Hello website gurus.
Nancy O. Pointed out a problem to me - that being my code is apparently not being validated as 'correct'.
Is this a problem? And if I have all my pages as templates ... are they all going to have the same code erros? Or do I have to check EVERY web page within my site?
Also, if EVERY page in the site is incorrect ... do I have to just update my template so all the codes transfer over?
Also, considering I'm totally new at this stuff, is it even possible for me to know how to correct code that is shown as invalid?
Here is a link to a validator output.
http://validator.w3.org/check?uri=http://prodigypianostudios.com/&charset=(detect+automati cally)&doctype=Inline&ss=1&group=0&No200=1&st=1&user-agent=W3C_Validator/1.1#result
Here is my site. I'm always changing the design so hopefully that won't hinder someone finding out if the code is wrong.
http://www.prodigypianostudios.com
I'm a bit confused as to if I'm using dreamweaver, how is the code wrong? Isn't the application writing it for me?
Thanks a lot for the help.
~Dustin

Dustin
It is not required for you to start a new thread, your questions would have been answered in the original post, so in the future (unless the board moderators object), just stay with your orignial post with the same problems.
dustinsanders1987 wrote:
Hello website gurus.
Nancy O. Pointed out a problem to me - that being my code is apparently not being validated as 'correct'.
Is this a problem?
Yes, is usually is, if you are trying to build a site and the foundation of proper code is not met, it is like building a house and wanting to get the roof done before the foundation....
And if I have all my pages as templates ... are they all going to have the same code erros? Or do I have to check EVERY web page within my site?
Also, if EVERY page in the site is incorrect ... do I have to just update my template so all the codes transfer over?
I hope the first sentence is just worded wrong, you create one template and then create child pages from there. If the code in the non-editable regions is not correct, then yes, you will have to correct them all. But all you need to do is correct the template and save and it should update all of the child pages.
Yes, check everypage...
Also, considering I'm totally new at this stuff, is it even possible for me to know how to correct code that is shown as invalid?
Here is a link to a validator output.
http://validator.w3.org/check?uri=http://prodigypianostudios.com/&char set=(detect+automatically)&doctype=Inline&ss=1&group=0&No200=1&st=1&us er-agent=W3C_Validator/1.1#result
The validator will help you with that, but some of it will come from you learning to read the code...it is not really that hard. You have 13 errors, which is not that bad.
First, find this line of code, on about line 2, on the next line, after this code
add <head>
<html xmlns="http://www.w3.org/1999/xhtml">
So it looks like
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
Then find this line of code,
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
After it, add
</head>
<body>
Then at the very bottom, find this line of code

and type
</body?
</html>
And revalidate the page...
Typically dreamweaver adds all the <html><head><body> opening and closing tags, why yours is not there is unclear, in all probability you unintentionally deleted it.
See how that works out for you.
Gary

Similar Messages

Where to put Validation Code?

Up until now, Im still having second-thoughts of where to put validation code when setting attributes of an entity.
Right now I have created lots of custom validators --(implement JbovalidatorInterface) that calls stored procedures to validate the value entered. But sometimes, i just use a ViewObject and query it on the setterAttribute method of the Entity and just manually throw a JboException of the value is invalid based on some business rule.
Question is, what are the best practices where to put validation codes? do we have to be strict that we always put all validations on Validators or are we free to just throw JboExceptions anywhere on the BC classes' code.
regards,
Anton

1. The reason I have a custom validator and I don't normally use the built in declarative validators is that the error message generated when the validation fails is fixed, only one message. I decided to have create a custom validator is that I need to test a one attribute for many cases in each case should produce a distinct error message. So if I use the built in validators, I would have to create lots of built in validators for that single attribute only. (and i have lots of entities and lots of attributes that needs business rule validation). So, I decided to create a custom validator, that calls the stored procedure, the stored procedure takes care of all test cases, for that attribute only, and I can return a dynamic error message depending on the test case that failed. What do you think about the approach?
It's a little extra work to create a reusable validator class that will only be used once, but whether you do it that way or encapsulate the call in a helper class that your one-off method validator code delegates too, it seems similar to me. So it's more of a stylistic choice for you which you like better. Now, if your reusable validator were enable to encapsulate
2. When I said anywhere; I meant inside the setterAttribute methods on the Entity and on the ViewRowImpl, orThe ViewImpl class or inside a method on an ApplicationModule?
Rather than writing code in the setAttribute, I recommend using attribute-level method validators. This makes it more clear where all your validation code lives.
I don't recommend performing validation in the view object level since entity objects are the component in the system that are tasked with handling validation. It would be easy to circumvent view level validation checks unless you make a lot of assumptions about exactly how your application is working.
3. One other issue is that Validator methods are for validation purposes only. So its not a good idea to put in attribute setters to other attributes inside there. So you put the attribute setter logic outside of the validator usually inside the setAttribute() just after validator returns. But there are cases that is very straightfoward to put validation logic inside the setAttribute; meaning, inside the setAttribute() method, I test for a condition, if it fails, just throw a JboException, if its true, continue with the otherAttributes setter logic.
Whether attribute setting of other attributes is performed in a setter method or in an attribute-level method validator, either way you will need conditional logic to avoid going into a validation "loop" (which eventually will throw an exception if after 10 attempts the object is still not valid at posting time.

8 is rejecting my key code. Support indicates it is a valid code and I need to reinstall. I did and it is still rejecting. What should I do next.

Thank you for considering my question. That is very generous.
8 is rejecting my key code. Support indicates it is a valid code and I need to re install. I did and it is still rejecting. What should I do next.

Acrobat 8 ?
Standard (sn:1016...) or Pro (sn:1118...) ?
Do you install from CD/DVD or download?
If it's a download, what's the size of the install file and where did you download it?
Is it a full version or an upgrade?
What's the operation System (Win, Mac) ?

HT1349 My gift card code is not recognized as a valid code. What can I do?

My gift card code is not recognized as a valid code. What can I do?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
 Cheers, Tom

Best place to put validation code?

Hey,
When using jsp and html forms for passing information from the
client to the server, where should i put the validation code? Is
it better to put the code in the bjc4 classes or to make some
FormHandler.jsp which checks wheter correct values/types typed
in the form by the user?
If i put the code in the bc4j classes, how can i then interact
with user, when he makes an error?
thx

The question is the classic stand off between resuablity and
modularity and user interface.
If you put the validation code in the client (jsp) then the user
sees the error quickly and it is relatively painless. However,
if the rules change, you must change ALL of the clients that
enforce that rule.
If you put it in the middle-tier then there is the delay in the
user feedback. The middle-tier will only validate the code on
some sort of post. However, your validation code will be in only
one place and therefore easy to maintain over time.
So what's the solution. I suggest for JSPs a combination. If the
rule is a real business rule then it needs to be validated in
the middle-tier. If it is something that is prone to user typing
error and is simple enough to be enforced within html, then it
should go there also. You must remember that those client based
rules can spread and your maintenance effort will go up.
Gary
JDev Team

Cant email photos,no validation code

Have been trying to email photos from photoshop elements 9.The program keeps asking me to enter a validation code.
Bought this H.P. laptop 1 yr. ago with Photoshop Elements 9 installed but have never been able to email from Photoshop Elements,the program keeps asking me for a validation code.
I have gone through this exercise twice now and never get any kind of reply . This is very frustrating and a very lame way to provide customer support.
PLEASE reply to this concern by email at ([email protected])

A while since I used 9, but I think the process is much the same. When you enter your sending email address, PSE sends an email to that address containing a verification code. This ensures that it is an email address you own. You must then enter that code back into PSE before it can be used to email photos.
So check your email address for an email from Adobe. If not in your Inbox, make sure you check junk and spam folders.
This is a user-to-user forum, so if you want customer support you need to click the Adobe logo at the top of each of these forum pages and follow the support links.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

The name ("common name") of a valid code-signing certificate in a keychain within your keychain path. A missing or invalid certificate will cause a build error. [CODE_SIGN_IDENTITY]

The name ("common name") of a valid code-signing certificate in a keychain within your keychain path. A missing or invalid certificate will cause a build error. [CODE_SIGN_IDENTITY]

If you could ask a coherent question, maybe...
Perhaps you should be posting in the developers forums...

Validation-code of a view is not working in portal

my validation code is working fine when testing in local view's application. the same view is attached to portal through fpm. while testing the same view in srm portal it is not working.can anybody suggest me why it is happening so. i will be thankful.

have you checked in debugging.....

I got an itunes giftcard for my birthday and when i tried to add it on my balance on my ipod touch it says the code you entered is not recognized as a valid code. but i just got this card brand new for my birthday.

i got an itunes giftcard for my birthday and when i tried to add it on my balance on my ipod touch it says the code you entered is not recognized as a valid code. but i just got this card brand new for my birthday.

Make sure you're using the correct code. For most iTunes cards, the code is under the scratchoff area on the back of the card. For more information, see this support article:
http://support.apple.com/kb/TS1292
If you can't get to work after perusing that page, contact the iTunes Store Support; instructions are at the bottom of that article.
Regards.

Enter Valid code,Tax Definition [Message 173-36] error while creating new posting period

Hi Experts,
We are not able to create posting period of 2014-15 as we are getting this error.
Enter Valid code,Tax Definition [Message 173-36] error .Please find the enclosed error screen shot for your reference.
Regards
KMJ

Hello KM Jayaprakash
I have the same problem, but i dont see (know) the screen which i can check "Advanced G/L account determination check box". I am in SAP B1 9.0 PL15. Please can you publish a screen shot.
it's urgent please.
Thanks

Hey. I have received an iTunes gift card, so I was all excited, punching the code into the "redeem" option on iTunes on my iPad2; however, I kept on getting the alert, "This is not recognised as a valid code". It is very legible, though. How come?

Hey. I have received an iTunes gift card, so I was all excited, punching the code into the "redeem" option on iTunes on my iPad2; however, I kept on getting the alert, "This is not recognised as a valid code". It is very legible, though. How come?

The obvious answer I think is that maybe you are not entering the letters and numbers correctly. I almost never get it right the first time when I use a gift card.
Try entering the code again - slowly and methodically. If it still doesn't work - look here for help.
http://support.apple.com/kb/TS1292
One final thought - if you are using a gift card that was purchased in another country - say like you have a Canada gift card and you live in the U.S. - that card will not work in the U.S. iTunes store.

The content code I got was said as not reconised valid code during redemption of Up-to-date Program?

I have registered for up-to-date program. However the content code I received was said as not recognised valid code during redemption. What can I do?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Folks report a two email process; one with a secure pdf that has the redemption code and another with the password to open the secure pdf.

Acrobat 10 pro doesn't ask for validation code

installing acrobat10 pro on imac with 10.8. When I try to open first time it doesn't ask for validation code. Application opens for a few seconds then crashes.I've tried installing 3 times with same results. What am I missing?

I thought I was buying the complete suite but it came as CS and Acrobat as separate discs, but I found a fix on one of the forums. I had to throw away an adobe folder that held the registration for CS and then it asked for Acrobat registration. Apparently I need to install Acrobat before CS?
Thanks for your response.

TS1292 I have four $50 iTunes gift cards. I am not able to load any of the codes into my new iPad account. I know I have not made any mistakes with typing in the 16 digit code. I keep getting the "code you entered is not recognized as a valid code" messag

I have tried all I can to load iTunes cards into my iPad without success. Upon giving one of the cards to a friend he conveniently loaded. I keep getting the error message: "The code you entered is not recognized as a valid code". I just don't know what to do as I need to use these cards to make purchases off the I tunes store.

i tried with out using commmit but it is not creating Status.
When i see the function module help and they are trying to COMMIT
FU STATUS_OBJECT_CREATE
Short Text
Create Status Object
Functionality
The function module generates a status object.
Take the object number from the object number management (function modules OBJECT_NUMNBER_GET_xx).
If no object number is given, the module takes a temporary object number that must be replaced later (function module STATUS_OBJECT_SWITCH_NUMBER).
Example
Creating an internal order with number 100123 (object type "ORC") for status profile "STATSCHEM" with final object number
call function 'OBJECT_NUMBER_GET_OR'
exporting
    aufnr = '100123'
importing objnr = objektnummer.
call function 'STATUS_OBJECT_CREATE'
exporting
    objnr = objektnummer
    obtyp = 'ORC'
    stsma = 'STATSCHEM'.
commit work.
Creating the same order with a temporary object number
data: objectkey like ionra.
* TBO00-REFSTRUCT for object type 'OR' is 'IONRA'
objectkey-aufnr = '100123'.
call function 'STATUS_OBJECT_CREATE'
exporting
    i_objectkey = objectkey
    obtyp       = 'ORC'
    stsma       = 'STATSCHEM'.
importing
    objnr       = objektnummer.
call function 'OBJECT_NUMBER_GET_OR'
exporting
    aufnr = '100123'
importing objnr = objektnummer_neu.
call function 'STATUS_OBJECT_SWITCH_NUMBER'
exporting
    objnr_old = objektnummer
    objnr_new = objektnummer_neu.
commit work.
Notes

I need validation code for cycle count open interface

Hi friends i require the validation code for the
cycle count open interface .
can anybody help me .......
Message was edited by:
user506929

Hi David
I want to know the procedure for cycle count open interface i.e.
1> How the data from flat file is uploaded in oracle INV
How many Tables are needed?
2>What validations are required ?
3>How these validations are performed ?
If you have any document pls send it to me at :
[email protected]
thanks for ur responce ......

Validating code question

Similar Messages

Maybe you are looking for