Validation Pattern Message

I want to script a Validation Error Message for a field that, on initialize, is in read-only mode. In Designer, when Type = "Read Only" the Validation Pattern and Validation Pattern Message are disabled. I can add script to define the pattern:
Myfield.validate.picture = "text{99999-9999}|text{99999}";
and trigger the validation:
Myfield.validate.formatTest = "error";
but how can I script the error message that the user sees? Doing the above generates a generic message "Myfield validation failed" but I would like the user to see a more description message, for example "Please enter a 5 digit or 5+4 digit zip code in the format 12345 or 12345-6789".
It seems silly that I add this field property at design time for a field that is NOT read-only, but not for one that toggles on/off from read-only to enabled. Any suggestions?

Hi
You can use the following:
tfPostalCode.validate.picture.value = "9999";
tfPostalCode.validate.message.formatTest.value = "An Australian Post Code must be a four digit number!";
Howard

Similar Messages

Creating Validation Pattern Message (like Designer) in Prof 8

We aere using Prof 8, and would like to create a Validation Pattern message (with error box checked) similar to a val pattern message created in LC Designer. Is there any way to do it?
KPanthen, Albany, NY

Hi
You can use the following:
tfPostalCode.validate.picture.value = "9999";
tfPostalCode.validate.message.formatTest.value = "An Australian Post Code must be a four digit number!";
Howard

Clear/empty entry of field after validation pattern message

Can anyone help me please with the following:
Now when user fills a field a validation pattern message shows when entry is not according to validation. BUT...the entry remains.
Do you know how to remove the entry from the field after clicking OK on the validation pattern message box?

I don't know how to do that, but I think it would be user abuse to clear out the field. If I mistype a date or an SSN for example, I don't want to have to type it all over again, just correct my mistake.
Jared

Problems with date validation pattern DD.MM.YYYY in Form Builder

(I am using LiveCycle Designer 8.0.)
My form uses an input date field which consistst of DD.MM.YYYY.
Display pattern, edit pattern, validation pattern and date pattern has been set to DD.MM.YYYY.
"Validation Pattern Message"-box has been set to checked.
"Validation Script Message"-box is not checked.
1. When I type:      313101
the system converts the digits to the date 01.01.3131
2. When I type:      3131
the system converts the digits to the date 01.01.3131
3. When I type:       31
I get an error message "Date is not valid."
I need a form to throw an error message if the user doesn`t type the correct input
DD.MM.YYYY. (01.03.2009)
Thanks in advance.
Tor

Does anyone have any input on this matter?
Thanks in advance.
Regards,
Tor

Error message: "Enter valid currency [Message 173-57]" during Deposit transaction

Hi All,
Is there a specific reason why can't I deposit from a "Multi-currency" cash account to a "specific (i.e., USD)" cash account using the Banking> Deposits> Deposit module.
I have already read below threads related to this issue.
Error message "Enter valid currency [Message 173-57]" during cash deposit
Can't Create Cash Deposit of Journal Entry due to "Invalid Currency" Error
Transfer Between bank accounts in different currencies
GL Postings between different currency accounts
foreign currency transactions
SAP Business One Note: 1260658 - Transfer monies between different monocurrency accounts
I have posted successfully e cash transfer from multicurrency to monocurrency cash account thru Journal Entry, However, I wanted to know the reason why it is not possible to post this transaction thru the Banking> Deposit module.
Appreciate your feedback on this matter.
Thanks!

Hi,
Same error message is appeared in 8.81 PL10. So this is not due to PL. If you select other than local currency at deposit currency, this error appears.
Let me check and update.
Thanks & Regards,
Nagarajan

Validation error message in a confirmation box.

To provide any validation error messages i am using the throw OAException, but that displays at the top of the page where many times users dont even notice it. i want to be able to instead display the error msg in a confirmation box that has just the OK button to make sure user has seen the message......
how do i do that ? (i do not want to use the DialogPage becos that takes me to another page and also is not for raising exceptions).
thank you.

Hi,
You have to use OADailogue region to achieve this. Please follow below code units to create a dialogue page and display an error message.
OADialogPage dialogPage = new OADialogPage(OAException.WARNING, message, null, "", "");
String yes = pageContext.getMessage("AK", "FWK_TBX_T_YES", null);
String no = pageContext.getMessage("AK", "FWK_TBX_T_NO", null);
dialogPage.setOkButtonItemName("DeleteYesButton");
dialogPage.setNoButtonItemName("DeleteNoButton");
dialogPage.setOkButtonToPost(true);
dialogPage.setNoButtonToPost(true);
dialogPage.setRetainAMValue(true);
dialogPage.setPostToCallingPage(true);
dialogPage.setOkButtonLabel(yes);
dialogPage.setNoButtonLabel(no);
java.util.Hashtable formParams = new java.util.Hashtable(1);
formParams.put("foo","value");
dialogPage.setFormParameters(formParams);
pageContext.redirectToDialogPage(dialogPage);
Thanks
Bharat

Cannot install OSX 10.4 (no valid error message) - why?

Hi everybody. I've been trying to install Mac OS X 10.4 on this G4 Quicksilver, but it seems that it's impossible. When I boot from the CD, it tells me "Mac OS X 10.4 cannot be installed on this computer" and promptly tells me to restart. It doesn't really give a valid error message, not even in the install logs.
I've currently got Mac OS X 10.2.8 installed. Another issue may be the fact it's fitted with 1 GB RAM that runs on a different speed than the other 1 GB, but I doubt it. I really wonder why I can't seem to install the new system, since I seem to meet the requirements pretty easily.
Thanks for your help.

Hi gja,
first of all: WELCOME TO THE DISCUSSIONS!
Most disk sets sold on eBay or similar sites are hardware specific software install disks. You CANNOT use hardware specific software install&restore disks that shipped with another computer. These simply do not contain the hardware drivers for any other computer model but the one they originally shipped with. You have to buy the retail full install DVD.
Besides this technical limitation it would also be ILLEGAL (unless you can guarantee and prove that the original owener completely erased it from his computer). Apple's Software License Agreement states in point 2:
2. Permitted License Uses and Restrictions. A. This License allows you to install and use one copy of the Apple Software on a single Apple-labeled computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time,...

Validation error message in JSF 1.2

I am testing my Web application inside Tomcat 6.0.2 and using JSF 1.2. I was surprised to see that validation error messages do not only display the custom error message, but also the id tag and a "Validation Error: " text. For instance, if an input text component has the required property set to true and the user does not fill in value, the following error message will be displayed on page submiision: "hello:test: Validation Error: Value is required." instead of just "Value is required.". I am wondering if there is a way to silence the id tag and the "Validation Error: " text. hello:test id tag reflects the fact that the form has an id of "hello" and the input text component an id equal to "test".

Hello
I'm quite new to this technology. Would like to know how can we replace the 'annoying component id' with label while generationg validation/conversion error message.
E.g:
'for:compID' some error message
must be formated as
'compLabel' some error message
I happened to know that this feature is supported in JSF 1.2 impl. But didn't work for me with Sun RI.Can any body give me some sample code snippet for the same
Thanks
Jobinesh

RE: Validating XML message...

Actually I stand corrected. XML Spy does seem to provide an OLE API to XML
validation ( the isValid method on the IDocument class ) although I haven't
tested it yet.
In my previous post I was thinking of another XML product I tested earlier
in the week which did not.
-----Original Message-----
From: Shaughnessy, Kevin
Sent: Friday, April 20, 2001 08:59
To: 'Rumen Georgiev'
Cc: [email protected]
Subject: RE: Validating XML message...
Rumen,
One idea that is possible is to use an OLE interface to a 3rd party XML
product. This assumes your logic which needs to validate is running on a
Windows box. But if so, it may work. Many products have type libraries which
can be run through OLEGen to create Forte classes. Then you can use TOOL to
talk OLE to that product.
For example, XML Spy 3.5 has a type library from which I created a Forte
project. Unfortunately this product didn't offer any extra features than
Forte's XMLParser ( i.e. the API didn't allow me to validate the XML ) so I
am back to using Forte's parser until I can test another product. If you
find one that does what you want let me know.
I've used OLE a lot with Forte to get functionality from other products (
VISIO, MS Office ) that Forte doesn't provide and it works well. Its a
platform dependent solution but one that may work for you.
Kevin
-----Original Message-----
From: Rumen Georgiev [mailto:[email protected]]
Sent: Friday, April 20, 2001 07:21
To: [email protected]
Cc: [email protected]
Subject: RE: Validating XML message...
Hi Kevin,
From the answers I've got it seems Forte parser is anon-validating one. So we have to look for an external
tool to validate these messages. What I am concerned
about is the integration with Forte.
Thanks for your help!
Rumen
Rumen,
From Tech Note 11811:
"ParserFactory.makeParser() will return a default,
non-validating XML parser."
My experience is that Forte's default XML parser will
not validate but will throw an exception if the XML
document is not well formed. I'm using the DOM
model and this exception happens on the
Document.importDocument( ) method.
If you want anything more than that you'll have to do
it externally.
Kevin-----Original Message-----
From: Rumen Georgiev [mailto:[email protected]]
Sent: Thursday, April 19, 2001 11:49 AM
To: [email protected]
Subject: Validating XML message...
We have to validate inbound XML messages before
processing them. The guys on the other side are
following XMLSchema recommendations to create their
messages using xsd file for validation. We plan to
use XMLParser Forte library and as far as I know it
validates against dtd file (haven't tried yet). If
this is true we have two options:
1. Find a program to convert xsd into dtd file and
use Forte XMLParser for validation.
2. Validate the message beforehand with an external
tool. That means integration between Forte and this
tool.
I would appreciate any help with either approach. Do
you know of a program doing xsd into dtd? Have you
used any existing tool on the market to validate
using XMLSchema? Or may be there is another solution
to
this?
Thank you in advance,
Rumen
=====
Rumen Georgiev
Forte Developer
EXE Technologies
(610) 872-4400 Ext.222
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/

Hi,
there is some change in the XMLSPy4.3/XMLType Library 1.2 :
Validation
One common task on documents is to validate them against an assigned schema or DTD. If the XML file has no schema or DTD already assigned, use "Document.AssignSchema" or "Document.AssignDTD" to add the necessary references to the document.
Examples:
objSpy.ActiveDocument.AssignSchema "C:\mySchema.xsd", False
or
objSpy.ActiveDocument.AssignDTD "C:\myDTD.dtd", False
If you want the user to select a schema or DTD, pass True as the second parameter to these functions to display a file-dialog. These methods only put the reference into the document and do not check the existence of the specified file. If the file path is not valid, the validation will fail.
After you have assigned a valid schema or DTD reference to your file, you are able to validate it with "Document.IsValid". IsValid needs some out-parameters that must be declared as VARIANTs to be accessible from script languages like VBScript and JavaScript.

How to catch the exact validation fault message?

Hi experts,
I would like to catch the exact validation fault message.
If the validate operation fails then I get the next SOAP Fault:
<env:Fault xmlns:ns0="http://docs.oasis-open.org/wsbpel/2.0/process/executable">
<faultcode>ns0:invalidVariables</faultcode>
<faultstring>faultName: {{http://docs.oasis-open.org/wsbpel/2.0/process/executable}invalidVariables}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}</faultstring>
<faultactor/>
<detail>
<exception/>
</detail>
</env:Fault>
However In the enterprise manager (audit trail) I can see the next message at the failed validate operation:
Invalid data: The value for variable "req_ProcessAdjustmentOp", part "bodyUPI" does not match the schema definition for this part Invalid text '?' in element: 'date'. The invalid xml document is shown below:
I would like to send back this message to the service consumer as it contains more information about the error. How could I do that? I've already tried the ora:getFaultAsString() function but I got the original fault.
Thanks,
Viktor

Hi Arik,
I tried to catch the invalidVariables exception but I couldn't... Here is my BPEL source would you be so kind to have a look at it?
Thanks!
    <scope name="Scope_validate_req_ReceiveAdjustmentOp" exitOnStandardFault="no">
      <variables>
        <variable name="v_RuntimeFaultMessage" messageType="bpelx:RuntimeFaultMessage"/>
      </variables>
      <faultHandlers>
        <catch faultName="bpel:invalidVariables"
               faultVariable="v_RuntimeFaultMessage"
               faultMessageType="bpelx:RuntimeFaultMessage">
          <sequence>
            <empty name="Empty2"/>
            <assign name="Assign1"
                    xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable">
              <copy>
                <from>$v_RuntimeFaultMessage.detail</from>
                <to>$f_validate</to>
              </copy>
            </assign>
            <rethrow name="Rethrow1"
                     xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"/>
          </sequence>
        </catch>
        <catch faultName="bpelx:invalidVariables"
               faultVariable="v_RuntimeFaultMessage"
               faultMessageType="bpelx:RuntimeFaultMessage">
          <sequence name="Sequence5">
            <empty name="Empty3"/>
            <assign name="Assign1">
              <copy>
                <from>$v_RuntimeFaultMessage.detail</from>
                <to>$f_validate</to>
              </copy>
            </assign>
            <rethrow name="Rethrow1"/>
          </sequence>
        </catch>
      </faultHandlers>
      <sequence name="Sequence4">
        <if name="by_operation">
          <documentation>sv_operation = "ProcessAdjustment"</documentation>
          <condition>$sv_operation = $C_OP_ProcessAdjustment</condition>
          <sequence name="Sequence6">
            <empty name="Empty4"/>
            <validate name="Validate_req_ReceiveAdjustmentOp"
                      variables="req_ProcessAdjustmentOp"/>
          </sequence>
          <elseif>
            <documentation>sv_operation = "ProcessReceipt"</documentation>
            <condition>$sv_operation = $C_OP_ProcessReceipt</condition>
            <empty name="Empty1"/>
          </elseif>
        </if>
      </sequence>
    </scope>

PGP Decryption Error (File is no valid PGP Message)

Hi, I'm encountering an error while decrypting a pgp file. Error is MP: exception caught with cause com.sap.aii.af.lib.mp.module.ModuleException: File is no valid PGP Message, could not apply decryption.
I have tested decrypting the file using an external tool and was able to decrypt it but not in PI. Below is my configs in sender commChannel (Note: no file content conversion is involved). Any ideas on how to resolve this? Thank you.

Hi Sarah, thanks for the response. I tried arranging the sequence as you've suggested but once saved, it will re-arrange to the old order as below:
keyRootPath
ownPrivateKey
partnerPublicKey
pwdOwnPrivateKey
With regards to running XPI Inspector Tool, i will install it first.
For the meantime, are there other suggestions?
Thank you.

How to do newline in Validation Script Message

Hi
im trying to write a multiline error message in the Validation Script Message for a textfield but everytime I hit return, i end up at the front of the current line instead of a new line. I've also tried \n with no luck. The only way i've found is by entering the text into notepad and then cut+paste into the Validation Script Message box. Is this a bug with Designer? I have Designer ES 8.2.1.3158.1.475346.
I am aware of how to do it by script ex. this.validationMessage = "line1\nline2" but what i want to is store the Section and field name in the Validation Script Message box and then build the error message ontop via script.
ex.
this.validationMessage = this.validationMessage + "Validation failed due to ....";

Just tested this and it looks like ctrl-enter works.

Validations in message mapping

Hi,
How can we do different validations in message mapping
and how can we trap them
Pls suggest blogs.
Regards

Hi,
you need to model them yourself
with some standard functions like:
- length
- if
- ifwithoutelse
etc
Regards,
michal

Programatically setting KM property Document Validity Pattern, no method

I am trying to programatically set the attribute Document Validity Patterns of a KM property. I am not able to find a method that achieves this. I can read the Document Validity Pattern, but not set it.
Can someone help? My code is shown below:
IPropertyConfigurationService propConfigService =
                    (IPropertyConfigurationService) ResourceFactory
                         .getInstance()
                         .getServiceFactory()
                         .getService("PropertyConfigurationService");
               IMetaModel metaModel = propConfigService.getMetaModel();
               IMetaNameListIterator iterator = metaModel.nameIterator();
               while (iterator.hasNext()) {
                    IMetaName metaName = iterator.next();
                    String name = metaName.getName();
                    String namespace = metaName.getNamespace();
                    if (namespace.equals(filter)) {
                         String[] documentValidityPatterns =
                              metaName.getDocumentPatterns();
                         //!!what, no method to set document validity pattern??!!

InDesign CS4 (6.0) Object Model says:
The pattern of dashes and gaps, in the format [dash length1, gap length1, dash length2, gap length2]. Define up to ten values.
That was it. I guess this is a place where the visual interface diverges from the javascript interface. I was expecting "Start" "Length" as in the dialog. Thanks!

Interactive Report validation error messages...

Hi guys!
I was looking for answer to this question for a long time now...is it possible to change the validation error messages in interactive report?
With regards,
PsmakR

Hi,
there are more validations than you think. Anthony Rayner has prepared a nice summary in a [url http://anthonyrayner.blogspot.com/2010/08/apex-40-enhancements-validating-form.html]blog post.
You see in that post where and how to disable validations, but also, that you may not disable all of them. The only way to avoid all validations would be to implement the report yourself completely.
The good news is, you can overwrite those messages. The following documentation tells you how to:
http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/global.htm#CHDEDHBJ
-Udo

Validation Pattern Message

Similar Messages

Maybe you are looking for