Validation while adding Partner to Activity

Moderator message: do not offer points
Hi,
I've added some contact persons under tab page "Partner" in Activity creation using txn CRMD_ORDER.
After hitting save, there should eb some validations for this, if the contact persons doesnt have any designation or mail id then it should not allow to add.Throw a message to user.
Is there any BADI or user exit for this?
<<text removed>>
Thanks in Advance,
Ponraj.s.
Edited by: Matt on Nov 25, 2008 1:01 PM

if don't find BADI or user exit, then field exit. easiest but kind of obsolete solution.

Similar Messages

"no active plan version exists" while adding system in partner profile

Hi,
i am getting "no active plan version exists" while adding logical system in partner profile. while duble click on this it showing "set active plan version".
Can anyone answer me how to do the set active plan version. I asked my functional team and they didnt know how to set it.
Thanks,
Gowthaman.

Thanks Sonia,
in OOAP i could not able to edit so i maintained plan version in OOPV and in sm30 in table T77S0 maintained PLOGI group.
Now i am getting different error while creating partner profile in we20..
*Object type US, ID CENTRALADMIN unknown (please observe upper/lower case)*
    *Message no. E0624*
*Diagnosis*
    *Object CENTRALADMIN of type US is not known in the system.*
*Procedure*
    *Enter a valid object and check the type.*
    *Make sure upper case and lower case are used correctly.*

'No detailed information exists for this person' while adding new reviewer

Hi All,
This is an extremely urgent issue.
We are getting the following message in SRM while adding a new approver to the Shopping cart once the - 'No detailed information exists for this person'
We have implemented the following OSS Notes in the SRM 5.5 system, Release 700 after rasing a call with SAP.
SAP Pilot OSS note - 1002957
Other OSS Notes -
999528 Adding Ad Hoc Approver fails due to comit erro...
722357 Ad hoc: Commit control with ad hoc enhancement...
990467 Commit Problem with AdHoc Agents...
984582 Problems with Posting Container Data (ad Hoc
 agent...
947296 Inserted/changed approver is not transferred...
910925 SRM Workflow: Ad-hoc agent not found...
803628 BADI workflow: You cannot add an approver
Here are the details
 Cannot add additional approver
 We are now on SRM 5.5 and a document attached shows the
 patch levels
 from SPAM.
 In shop transaction, it is possible to change the
 default approvers,
 but not possible to Add.
 When we add, the system shows the list of available
 approvers, allows
 selection, but "transfer" button does not actually
 transfer.
 When the cart is saved, the added approval shows as "no
 approval
 available".
 We are using the standard workflows for 2 step approval.
 A document is attached to show what happens and the
 results of checks
 we have performed.
 BUS2121 also shows as ok when checked.
Any pointers what could be possible reasons.
Points for sure. !!
Regards
- Atul

Hi Atul,
Here is the list.
 |----- 0000702787 EBP 4.0: Message "Enter a country"
 |----- 0000732828 E-mail messages for work items with incorrect line break
 |----- 0000735026 Memory problems at BBP_GETLIST_INDEX_FILL
 |----- 0000804317 SRM40/SUS/PO: PO inbound with error BBP_PD 147
 |----- 0000862851 PO not ordered due to different locations error
 |----- 0000902956 Changing Account assignment category BE Limit service PO
 |----- 0000911446 No reservation is created
 |----- 0000917869 SRM 5.0: PPOMV_BBP - Vendor address tab page
 |----- 0000919553 SRM 5.0: Termination of output preview for invalid partner
 |----- 0000920363 Shopping cart transfer: Sourcing indicator is not set
 |----- 0000924218 SRM 5.0: wrong error message for non existant auth. PurchOrg
 |----- 0000924811 SRM5.0: Javascript error on document screen
 |----- 0000926750 Shopping cart: Unit of measure is not restored
 |----- 0000926878 Link for expanding details in the shopping cart too small
 |----- 0000927142 SRM5.0: Browser hangs up during attachment upload
 |----- 0000938168 SRM50: Message "No default value from vendor master"
 |----- 0000938296 JavaScript runtime error in the bid invitation
 |----- 0000940805 BBPS_SC_APP_SOS cannot be enhanced
 |----- 0000941935 External requirements displayed as a reference
 |----- 0000942742 Update is cancelled if new source of supply is found
 |----- 0000944592 No location when vendor has changed
 |----- 0000944918 ECS: Find back end purchasing group as a responsible group
 |----- 0000945601 Termination when you display purchase order item detail
 |----- 0000948425 Shopping basket changeable although already approved
 |----- 0000953238 Shopping cart history in the sourcing cockpit
 |----- 0000954066 Follow-On Documents Tab does not get Highlighted
 |----- 0000954409 Error message during approval of a confirmation
 |----- 0000955377 Long runtimes for workflows with blocks
 |----- 0000956108 Empty worklist after clicking button 'Find'
 |----- 0000956723 BBPMAININT:Bus. partner display switches to maintenance mode
 |----- 0000956797 RUSRM50: Limit Purchase Order Functional Area Error Message
 |----- 0000957884 Category Management: Data disappears after program SAVE
 |----- 0000958045 BBPSC04: Delete icon not hidden despite screen variant
 |----- 0000958349 Final delivery with quantity 0
 |----- 0000959528 During PO creation wrong error message BBP_PD 428
 |----- 0000960169 Favorites not saved for 'Purchase for'
 |----- 0000961422 BBP_MON_SC: No search help for 'Created By'
 |----- 0000962093 BBP_VENDOR_CREATE: Refresh BP data
 |----- 0000962252 BBP_GETLIST_INDEX_FILL: Incorrect processing statistics
 |----- 0000962474 Error after changing partner data
 |----- 0000964132 Approval Preview for Rejected Items: Wrong User's Inbox
 |----- 0000964361 Cannot find employee of vendor
 |----- 0000964455 Country for the PO box is initial
 |----- 0000964911 Kopieren von Alertkategorien: Containerelemente verschwinden
 |----- 0000966072 Download of material fails - set type COMM_PR_UNIT
 |----- 0000966323 Service Item: Not able to create PO in ERP backend
 |----- 0000967429 Approval buttons not updated after release
 |----- 0000967615 Performance of BBP_PD_PO_GETDETAIL may be poor
 |----- 0000968110 Transfer canceled, account assignment acc. to value/quantity
 |----- 0000968251 BBPSC02:In source of supply preferred vendor not validated
 |----- 0000969091 SRM does not support passwords longer than 8 characters
 |----- 0000982293 Ext requirements: Purchasing group data not transferred
 |----- 0000982448 Impossibility to delete an item in PO
 |----- 0000982674 Change PO quantity does not update account assign quantity
 |----- 0000983130 Search for back-end purchase orders using the requester name
 |----- 0000984184 BADI BBP_ALERTING active but its implementation isn't called
 |----- 0000985179 Delete button active for backend service entry sheets
 |----- 0000990264 Multiple confirmations cannot be posted for service & limit
 |----- 0000996104 No catalog when confirming back-end blanket purchase orders
 |----- 0001003408 BBPCF: Cannot Add Catalog Item to Confirmation for Limit PO
 0001010791 Flag Confirmation based Invoice Verification set erroneous
Kind regards,
Yann

Error while adding a webpart to a sharepoint

I need some help with adding a custom web part to the landing page. I created a new wsp file for the web part and tried to add it as a solution into the web galleries of the site settings. But I am unable to invoke this web part and it throws an error, “The
site collection containing this sandboxed solution has exceeded its daily resource usage quota”
The web part appears within the custom web part section when I try to add it into the page. As an FYI, I tries to modify the quotas and locks of the template being used within the site collection-> modify quotas and lock of the central administration
and have increased Sandboxed resource solution quota to 300 points but still it somehow doesn’t appear to change while adding the web part.
What am I doing wrong here?

Well, the issue was that while updating the quotas and locks for the sharepoint site I needed to select the web application and not the web farm. The resource did get increased to 300 points at the farm level but as I was using a sandboxed application
to be added as a web part, the target should have been the web application. I corrected this and then added the solution to the sharepoint and activated the solution. After which I was able to include the web part into the site. Hope this helped, do let me
know if anyone needs any further explanation.

Error while adding a job to scheduler

Hello,
I have a batch job that is running fine in both DEV and QA environment. In DEV, I am able to schedule and run it daily. I created a similar schedule in QA environment using BODS Mgmt Console/Administrator. However, upon Activating the schedule, I am getting the following error message. Would someone know why would this error be thrown and steps to troubleshoot this error?
Thanks.
[Repository:AECON_DW_REPOSITORY Schedule:Daily_Run_QA Error:Error while adding a job to scheduler]
When contacting the server above exception was encountered, so it will be assumed the schedule is not active anymore.

Hi Rizwan Tahir ,
Delete the job server associated with the current batch job and recreate it.
Then try creating a new schedule using the new job server.
And take care that job server is created in QA environment.
Hope this should work.
Regards,

Error while adding a used relationship between the New DC and the Web DC

Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
Satish

Hi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish

Error with Dump while adding Currency field in UI

Hello,
I have a requirement to add a custom entity in MDGM with an currency attribute, and encountring dump while adding the field to Web Dynpro component in UI.
Could some one point me a direction and see below :
Custom Entity with attributes
ZTSTOCK data element is type curr (Lenght 13, Dec 2)
Data Model is activated without errors and created custom Web Dynpro Form component. while designing it in UIBB by adding Element TSTOCK_VL encountring a error and dump.
Error: Could not find attribute WAERS and also dump showing below:
Category               ABAP Programming Error
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_WD_CONTEXT
ABAP Program           CL_WDR_CONTEXT_NODE_INFO======CP
Application Component BC-WD-ABA-RUN
Date and Time          21.05.2014 00:13:32
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along
     the call hierarchy.
     Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program
      'CL_WDR_CONTEXT_NODE_INFO======CP' has to be
     terminated.
Any help please.
BR, Srihari

Yes, since the release of the current segment is 45 and you are now in a ECC6 system you cannot cancel the release (because there is no ECC6 version). Just use the add version button to create a new version for ECC6. Once you have that you can add fields and set the release to ECC6.
If you later on need to add more segements you can then cancel the release for your ECC6 segment and add the fields and set the release to ECC6 again (because you already have an ECC6 segment)
Hope that explains it,
Michael

Error while Adding field on Screen Variant

Hi SAP Gurus,
I want to add one field Trading partner in Fast entry screen.
I am getting below error message while adding one field Trading Partner in Screen Variant ES007(O7E6)
FIELD instruction for field BSEG-VBUND missing on template screen
Message no. F4171
Please let me know where do I have to maintain Trading partner field in template screen.
A quick response on this is highly appreciate.
Regards,
SATVIR SINGH
Edited by: Satvir S Digwa on Oct 6, 2010 12:41 PM

Hi
Go through the below link:
Re: Trading partner in Field Status Group
Rgds
Vani

Error while adding subscriber in UNITY

While adding the Subscriber, it shows the below error eventhough all the domain rights and permissions has been added.
Error fetching MailStore list (for server ECAE-MSG-SRV).
hr=0x8004010F (0x8004010f)
Check that the AVDSGlobalCatalog is registered and running.
Please see your Cisco Unity system administrator for more details

Hi,
We'll need some more details.
What version of Unity?
What version of Exchange?
Is this a new installation?
Has this ever worked?
Has the Unity server hostname been changed since Unity was installed?
Did you recently change anything on the Exchange side?
1. Double check that the permissions for UnityDirSvc have been correctly delegated exactly according to
http://www.ciscounitytools.com/Applications/Unity/PermissionsWizard/Unity50/Help/PWHelpExchange_ENU.htm Giving it too many permissions can break things. You may need to force a DC/GC reconnect and make sure that Unity is able to talk to the GC properly (view the event logs to make sure), otherwise finding the Exchange server will never work.
2. You can also verify the below, however ***Do this at your own risk, it involves manual database modification that could compromise Unity if done improperly***
Stop Unity
Go to the SQL Server Enterprise Manager,
Open Microsoft SQL Servers
            - SQL Server Group
              - (Local) (Windows NT)
               - Databases
                - Unity Db
                   Tables
                    Right-click on 'MailboxStore'
                     Select Open Tables > Return All Rows
Arrow over to the 'HomeServer' field and verify if this partner mail server is correct. If not, this needs to be changed.
Restart the Unity server
Hope that helps,
Brad

IMPORT_ALIGNMENT_MISMATCH Dump while Adding fields in MC02M_0ITM in RSA3.

Hi Experts,
   I need to add some Z custom fields in BW datasource 2LIS_02_ITM which we are doingby appending in structure MC02M_0ITM. I am activating structure and removing hide field check box also in RSA6 transaction. But when we are executing transaction RSA3 (Both Delta & Full load ) it is giving us IMPORT_ALIGNMENT_MISMATCH dump. we have removed all the queues from SMQ1 using program RMBWV302 before making changes. Please help me out in this. Following are dump details:-
Runtime Errors         IMPORT_ALIGNMENT_MISMATCH
Exception              CX_SY_IMPORT_MISMATCH_ERROR
Date and Time          07/14/2010 05:23:40
Short text
     Error when importing object "MC02M_0ITM_TAB".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLMCEX" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
      not caught in
     procedure "MCEX_BW_LO_API" "(FUNCTION)", nor was it propagated by a RAISING
      clause.
   Since the caller of the procedure could not have anticipated that
exception would occur, the current program is terminated.
The reason for the exception is:
When importing object "MC02M_0ITM_TAB", the structure did not matc
structure of the target object. The error occurred in component
no. 40.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
Please provide me some input about how to correct the same. Also what went wrong while adding new fields..
Thanks
Ankur Sharma

All modified fields should be in new append structure not in any old append structure sue to new field need new space allocation.

Error while adding attribute to 0material

hello, experts
I've got some errors while adding Z-attribute to 0material as a attribute.
here's a part of the log.
Activate table /BI0/PMATERIAL
Table is not yet classified
/BI0/PMATERIAL: Structure change at field level (DB is adjusted)
Adjust table in DB >>>
sql:
ALTER TABLE "/BI0/PMATERIAL"
ADD ("/BIC/ZMRPTYPE" VARCHAR2 (000002)
DEFAULT ' ' NOT NULL )
ORA-01562: failed to extend rollback segment number
DDL time(___1): .2,144,462 milliseconds
The SQL statement was not executed
Table /BI0/PMATERIAL (Error adjusting the database)
Table /BI0/PMATERIAL was not activated
How could I solve this problem?
Please help.
thx.

Hi,
You can also to Tcode:RSRV
Tests in Tran RSRV
->All elementary Test
>Master Data
>Compare Charat Values in SID-,P- andQ- Tables.
Drag that in right panel.
Open that > in right panel and Entry 0MATERIAL.Transfer
Then Execute->Yes in pop-up.
If any problem..click on repair.
Hope this helps....
Regards,
San!

Valid Acrobat Pro XI says Activation Required after 30 days

Hello!
We have made an enterprise deployment of Acrobat Pro XI using the Adobe Customization Wizard XI. Since our environment is 100% offline, we added the Serial Number (that we in advance validated online) during the Customization Wizard, so that the application can install silently without any online validation needed.
Our problem now is that Acrobat still after 30 days says that it is not activated. Can this problem have come from the fact that at one time, after the deployment configuration was made, we remade/edited the configuration with the Customization Wizard, and used the same serial code as before?
Bottom line: Do we need to revalidate online and get a new serial number every time we make a change with the Customization Wizard?
If not, what else can cause Acrobat to believe that it is not activated, even though we are using a valid key?
Error message:
Activation Required.
Please connect to the internet. Activating Acrobat XI Pro is required today otherwise it will stop working.
Thank you in advance!

No, it's not a part of Creative Cloud. It's just a standalone Acrobat Pro XI.
What I meant about "using the mst wrong" was that we run setup.exe, which i guess uses setup.ini. and in setup.ini under [product] "CmdLine=TRANSFORMS="AcroPro.mst" is added (the mst includes the ISX_SERIALNUMBER), but maybe we should try running the AcroPro.msi directly and apply the transform directly in the command line.
I know we could just try this, but it's essential that we are 100% sure that our solution works before sending it out to thousands of users.
I was in contact with someone from Adobe Support earlier who said to run this command: msiexec /i acropro.msi TRANSFORMS=AcroPro.mst /qn and "then you can check in TASK manager , you will see 4 MSiexec processes running."
That was kind of confusing. Exactly which processes they meant and how that proves that the activation was successful, I don't know.
The support guy told me that the only thing needed for the offline activation to work was to add the ISX_SERIALNUMBER to the mst, which we have. But then what does the "Grant Offline Exception" button in the Adobe Customization Wizard XI do? There must be some kind of magic that this button does that i can verify in the mst.
Also, I see the recommendations about posting this in the enterprise deployment forum, and I guess it could've been moved there, but I don't think it would make much difference since this problem remains the same whether it's deployed to lots of users or just one.
Thank you so much for any further help.

SRM Create Confirmation - Short Dump while adding Approver

Dear Experts.
Currently I am facing following issue.
Issue:
In SRM “Create Confirmation” Screen, when user click on check button and after that if user tries to add approver in approval tab then it is going to short dump. Please find the short dump info:
Category ABAP Programming Error
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_OS_OBJECT_NOT_FOUND
ABAP Program /SAPSRM/CL_WF_PROCESS_MANAGER=CP
Application Component SRM-EBP-WFL
I had analyzed this issue and following points are my findings.
We have written code in BBP_DOC_CHECK_BADI to check the approver is added or not in approval tab. For this purpose we are using METHOD lo_conf_adv->/sapsrm/if_pdo_do_apv_ext~get_process_info (Here lo_conf_adv is object of interface /sapsrm/if_pdo_bo_conf_adv) and the instance of lo_conf_adv is getting from METHOD /sapsrm/cl_pdo_fact_conf_adv=>get_buffered_instance By pasing Doc GUID.
As per my analysis, the above code only causing the short dump while adding the approver in aproval tab. More importantly the CHECK BADI (BBP_DOC_CHECK_BADI) is not triggered while adding the approver.
If I comment this code (which is mentioned in point 1), then the application is not giving any short dump and adding approver successfully.
I tried to find SAP notes but there are no SAP notes related to this issue. Also, I tried to find alternate METHOD to replace lo_conf_adv->/sapsrm/if_pdo_do_apv_ext~get_process_info but I have not got relevant method. Please let me know if there is any solution for this issue.
Thanks & Regards,
Sasidhar V

Hi Ritesh,
Thanks for the fast response.
We are using Process Controlled Workflow. In Doc Check BADI, we are checking the respective approver is added or not in approval tab in "Create Confirmation" Screen. While creating confirmation, when user click on "CHECK" button and If respective approver is not added then throwing error message.
We are using Method "GET_PROCESS_INFO" to get approval information only. when this method is triggered in Check BADI then it is doing respective validations and displaying messages. After that when we try to add approver then the system trying to read entry from table "/SAPSRM/D_WF_003" by passing OID to LEVEL_GUID. But there is no entry in this table and that's why it is giving short dump.
Can you please let me know why it is reading entry in that table and why entry is not exist.
FYI, If I don't use method "GET_PROCESS_INFO" in check BADI then respective code where short dump happening is not triggering (System is not trying to read entry from /SAPSRM/D_WF_003 table) and so it is not giving short dump.
Thanks & Regards,
Sasidhar V.

Error while adding A/P Credit Memo!

Error while adding A/P Credit Memo..........
'G/L Accounts' (OACT) (ODBC-2028) Message - 131-183
Please advice me .....
Thanks...

Hi
Check this thread this may help you.
[Re: AP Invoice - No Matching Account Error]
Regards
Balaji

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.

Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling

Validation while adding Partner to Activity

Similar Messages

Maybe you are looking for