Valuation mode for QI MIC and QN MIC

Dear Friends,
For QI MIC the requirement for valuation of results recording is by catalog accept and rejection
For QN the requirement for valuation of results recording is by upper and lower level , meaning if the recorded value is upper limit and lower limit the results is fail or pass
so i decided to use
for QN - Mean value in tolerance range
for QI - Attribute inspection non conf units
Is my decsion is correct , if i am wrong some one can help me also i need to know when we can use manual valuation
Thanks & regards
Raj

Rajkumar,
Quali - catalogs & Quant - upper & lower
for both case you can use attributive inspection -- but in sampling procedure you have to define allowed no.of nonconformance to accept that particular MIC.
mean value - only applicable for quantitative characteristics.
you have to define Sampling procedure and assign this your plan
regards
Sami

Similar Messages

My iphone 4 went into recovery mode for some reason and it is unable to be restored. any ideas how to fix this?

my iphone went into recovery mode for some reason and is unable to be restored. it wont turn on and when plugged into a charger it shows a usb and itunes symbol. so i plugged it into my mac and connected to itunes then itunes said it has detected a phone in recovery mode and needs to be restored. so it goes through the restoration process for a couple minutes or so then stops and says itunes is unable to restore because an unknown error occurred (2001) or (2006) and other times i try it says its unable to restore because itunes cant detect the device... any ideas how to fix this?

Errors 2000-2009 (from Apple support): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604. If the issue persists, it may be related to conflicting security software.
2001: Use up to date software. Make sure your device is in DFU Mode: http://www.iclarified.com/entry/index.php?enid=1034
2006: Use a different USB cable. Possibly the one that came with your iPhone.

Iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?

iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?
the iphone 4S has been in recovery mode for a long time and i have tried to press and hold the power and home buttons until the apple symbols comes on the screen again but it stay on the screen until the screen turns off and doesn't come back on to the home screen and have tried to sync with mac and doesn't do anything it does display the itunes and cable icons for a while but then goes back to the apple symbol and doers nothing what can I do to fix this and not loose what is on the phone at all?

Hi, simonRM.
Thank you for visiting Apple Support Communities.
I understand that you are unable to restore your iPhone. Here are the best troubleshooting resources to start with when not being able to update or restore your iPhone.
If you can't update or restore your iPhone, iPad, or iPod touch
Resolve iOS update and restore errors in iTunes
-Jason H.

Petition: Programable play mode for MuVo V200 (and posibly othe

I would like to suggest ti include a programable play mode for MuVo V200 (and N200), I mean, a a play mode wich the user could select one-by-one songs on the MuVo and then the MuVo play those songs in the given order.
Creative may implement this by introducing virtual folders, folders that only contains references to the stored songs, so user could use the existing diferent play modes over those folders.
I think there's no technical reason that avoids this feature, but I know it may be not simple.
Thanks.
PD: Oh, of course I suggest Ogg Vorbis support, I don't care if my battery stands half time (WMV do it also, but no so hard), but I know Creative don't like Ogg Vorbis

The MuVo's don't have rescue mode, except for the MuVo?.

Can I use my headset for "sound-out" and phone mic...

I have an E51 and the headset that came with it. I would like to achieve the following during calls: To use the headset for sound-out (i.e. as headphones) and the phone mic for sound-in. The mic on the headset gives a lot of static and I would rather use the phone mic (girlfriend complains).
So I tried this: Under Tools>Settings>General>Enhancement, I set the Default to Headphones.
Still, when I connect my headset it says "Default Enhancement: Headset" and the headset mic is automatically used.
The default enhancement settings does not seem to matter.
Does anyone know if there is a way to solve this? Is there a way to manually switch between the headset and phone mics?
Thanks!

Thanks for the reply. I am not using a bluetooth headset but a cabled one (that one that came with the phone for me -- I guess nokia skimped a bit here, not shipping with a bt headset).
I was recently told basically the same thing you are saying in a store, that it is not possible to use the mic for sound-in during a headset call. He also said that any cabled headset or even *headphones* will be recognized as a headset by nokia phones because they all have the same 3 connectors (right, left, mic) on the 2.5mm jack. Can that really be right?
So that means that even if I get a set of cabled headphones for my e51, I will not be able to use them for sound-out during a call?
cheers

HT5624 when I turn my iMassage on it will go to activation mode for along time and then fails Whats teh problem ?!!

when I turn my iMassage on, it will go to activation mode for a long time and then fails. Whats the problem ?!!

Do you have a texting plan and are you connected to data when you try to activate? Check this support document for trouble with activating iMessage. http://support.apple.com/kb/TS4268

Getting IntelliType for Microsoft keyboards and/or mice to load at startup in Mountain Lion

To date, Microsoft hasn't fixed the issue with the IntelliType drivers in Mountain Lion so they load by themselves. You have to open the System Preferences and click on the Microsoft Keyboard or Mouse panes to get them to load. The following will eliminate the need to perform these manual steps.
I'd like to give credit to the person who first discovered this, but having found the same text in numerous places, I can't single out the origin.
Navigate to the folder /Library/PreferencePanes/ of the startup drive
Right click on Microsoft Mouse.prefpane for mice, Microsoft Keyboard.prefPane for keyboards
From the resulting contextual menu, select Show Package Contents
Navigate down to Contents > Resources
Leave the Resources folder open on the desktop and open the System Preferences
Select Users & Groups
Click on your user account and then the Login Items tab
Go back to the Resources folder on the desktop, select the file MicrosoftMouseHelper or MicrosoftKeyboardHelper, then drag and drop it into the Login Items window on the right hand side of the Login Items page (in the System Preferences window).
In the sample below, I added the keyboard helper.
Repeat the steps if you added the keyboard helper and also need the mouse helper.
Now when you restart or start up your Mac, these helpers will load automatically.
For users wondering if this is some sort of hack, it is not. If you've used IntelliType in Lion, Snow Leopard, or other previous versions of OS X, you'll see that MicrosoftMouseHelper and/or MicrosoftKeyboardHelper are in the user account Login Items. What's probably happening is security changes in Mountain Lion, such as sandboxing, are preventing these Login Items from being added during installation. So all you're doing is manually completing a step the IntelliType installer is failing at.

how you found this solution is beyond me as i did google a few days ago and found nothing.
I've looked numerous times, also. Must have gotten the right keywords this time.
What symptoms will a poster have if this is the problem?
I can't speak for users of the mouse panel, but if you're using one of the Microsoft keyboards the drivers are for, your keyboard won't be completely functional. Among the problems:
1) The keyboard will remain mapped for a PC. The Alt (Option) key is next to the spacebar and will stay there, which means the Windows logo key will respond as the Command key, which is between Alt and Ctrl. To the right of the spacebar, the Alt key will again be Option, but the menu key between that and the right Ctrl key won't do anything you expect. To say the least, not having the Command key in its normal Mac position is a real pain.
2) None of the other special keys will work, like the entire string of silver keys across the top of the 4000.
gave you credit and pointed back to this for ya. great guy.
Thanks! I hadn't seen that site before. Looks like a person could spend days there. I'll have to bookmark that one.
A secondary note: For users wondering if this is some sort of hack, it is not. If you've used IntelliType in Lion, Snow Leopard, or other previous versions of OS X, you'll see that MicrosoftMouseHelper and/or MicrosoftKeyboardHelper are in the user account Login Items. What's probably happening is security changes in Mountain Lion, such as sandboxing, are preventing these Login Items from being added during installation. So all you're doing is manually completing a step the IntelliType installer is failing at.

I have updated to IOS 6, the App store won't work, is stuck in update mode for 1 day and the battery now goes flat in 3 hrs without use. Can I go back to IOS 5?

Hi, I was forced to upgrade to IOS 6 due to a restore.
Since the upgrade, I have lost information, the App store is stuck in update mode, my battery drains in hours and many more problems.
Is there a way to go back to the VERY RELIABLE IOS 5? This phone is nearly useless now.
Thanks

Just FYI - the situation is resolved. I downloaded the new snow leopard 10.6.8 update for safari and now itunes works. I have no idea what that has to do with anything - but I saw it on another forum and it actually worked.

Pdf form in read-mode for the users and...allowing me to save my new modifications

I wanted to save a modification in my pdf form. Unfortunally, it was opened by another user in read-only mode.
When I tried to save my new modifications, my screen pops me up the classic error message: cannot not save because it is opened in read....
The form is stored in network shared drive and I am the owner. The users have the read only permission.
I open it with Acrobat Pro X and users open it with Adobe Reader XI. Both sofwares are setted with the enable protected mode and javascript disabled,
I tried to not use the preview mode in Windows explorer without succes.
Is my problem a bug or is it the normal way abobe acrobat works ?
Thank you for any replyer !

Hello Gkaiseril,
Thank you for your fast reply !
I am not at my office right now, however I am pretty sure in the Word case, I will be able to edit.
During my problem, I checked in the File manager on the server side (windows 2003 r2 sp1 x64). The reader had not write permission on the file, and I am the only owner with the full permissions.

Stereo speakers mod for ALL apps and sounds

Hi Sony Community,
I want ask you if there is a mod without root to use the speakers of my Xperia Z2 on stereo for ALL apps, calls and sounds (system and not system).
I found very bad that Sony hasn't optimize Android 5 with this feature because the speakers of Xperia Z2 are very beautiful and functional, better than Z3, but without stereo output are very limited and reduce the potential of this smartphone!
The stereo front speakers of Xperia are one of the GREAT and BEST design features against ALL Samsung and Apple devices, so I don't understand why Sony use they on stereo to give us a powerful and especially COMPLETE sound output
I hope in a future implemention of this setting into next firmware update, but now I will very haapy if there is a sostitutive mod to force to use speakers o stereo for ALL.
Every answers are welcome to me!
Cheers
Solved!
Go to Solution.

No problem.. It's as safe as any modification of software I guess. I have never had any issues, but yes I'm sure just rooting the device will not lose your drm keys. You only lose drm keys when unlocking the bootloader which I do not feel comfortable doing.
There's a full tutorial on XDA on how to do this. To sum it up, you pretty much have to downgrade in order to root and have custom recovery, then flash a pre-rooted stock rom. This will give you 100% stock experience, but with root added. Then you can choose which mods, etc you like to flash like the one mentioned above.
It doesn't require too much knowledge, and isn't too complicated, but I'd still recommend reading up on it a lot before doing it, just in case anything happens. I always make sure I read instructions in full at least 3 or 4 times to feel comfortable.

BIOS Collection(modded) for Socket A and Socket 754

Modded BIOS Use At your own Risk!
MSI K7N2 Delta 2 LSR/FSR/Platinum:
Recommended BIOS:
Download B72c
password for instalation is "T9-246ED", enter it when asked. instruction is included due instalation. after simple extraction proceed as regular BIOS flash.
do not forget to Enable APIC in BIOS its disabled by default..
If B72c isnt fit well(work well) that depend of your memory here B62 mod which your memory should work fine if B72c refuse:
<a href="http://www.ukshazam.com/download/bosskiller/W6570NMS B.62.rar">Download B62[/url]
Latest Version Beta by MSI named also B72(newest release):
Download B72 Latest MSI Beta, Floppy Image
Download B72 Latest MSI Beta, flash util and BIOS only
B62 and B72c information and discuss here: https://forum-en.msi.com/index.php?topic=84715.0
MSI K7N2 Delta ILSR:
Info:
MSI K7N2 Delta ILSR Modded BIOS based on Official v. 7.80 BIOS
Version History:
version 1.1 add-on
- Added Mobile Barton Support
- Added full RAID support and latest firmware for Fastrack 376
- Add Cpu Vcore selection to 1.85(original was 1.80)
- ICPA Function Activated
- CAS Latency Auto Option added
- Super Stability Option Activated, can be turned off.
- Small EPA Logo Added
- CPU Internal Cache can be enabled/disabled
- Power Status Led Activated
- Reset Configuration Data Activated
- Added Shutdown Temperature
- Added DRAM 2.8Vcore
ver 1.0 add-on
Description:
- Add Halt On Error option
- Fix problem where some hard drives are sometimes not detected
- Better Stability and perfomance improvement
<a href="http://www.ukshazam.com/download/bosskiller/k7n2deltaILSR mod.7.80 F RAID + CPU VCORE.rar">Download 7.8 mod[/url]
MSI K8N Neo3 F:
Info:
BIOS has the PCI and SATA lock which is restoring OC potencial.
Minor USB problem fixed.
Added 183 Memory Devider.
Download 183 mod

temp link for:
MSIP965 Neo BIOS ver. 1.62(Date: 08/30/06) :
http://rapidshare.de/files/33337455/7235v162.rar.html
MSIP965 Neo BIOS ver. 1.67(Date: 09/08/06) :
http://rapidshare.de/files/34366659/7235v167.rar.html
MSIP965 Neo BIOS ver: 16A(Date: 10/17/06)
MSIK8N Diamond Plus BIOS ver. 1.33:
http://rapidshare.de/files/35454120/K8NDP133.exe.html
MSIK8N Diamond Plus BIOS ver. 1.00:
http://rapidshare.de/files/35711075/K8NDP100.exe.html
MSIP965 Platinum(ID 7238):
BIOS ver. 1.22 (Date: 10/24/06)
MSIP965 Neo BIOS ver. 1.67(Date: 09/08/06) :
http://rapidshare.de/files/34366659/7235v167.rar.html
MSIP965 Neo BIOS ver: 16A(Date: 10/17/06)
MSIK8N Diamond Plus BIOS ver. 1.33:
http://rapidshare.de/files/35454120/K8NDP133.exe.html
MSIK8N Diamond Plus BIOS ver. 1.00:
http://rapidshare.de/files/35711075/K8NDP100.exe.html
MSIK9N Platinum(ID 7250):
BIOS ver. 1.51 (Date: 01/05/07)
MSIP965 Neo BIOS ver. 1.62(Date: 08/30/06) :
http://rapidshare.de/files/33337455/7235v162.rar.html
MSIP965 Neo BIOS ver. 1.67(Date: 09/08/06) :
http://rapidshare.de/files/34366659/7235v167.rar.html
MSIP965 Neo BIOS ver: 16A(Date: 10/17/06)
MSIK8N Diamond Plus BIOS ver. 1.33:
http://rapidshare.de/files/35454120/K8NDP133.exe.html
MSIK8N Diamond Plus BIOS ver. 1.00:
http://rapidshare.de/files/35711075/K8NDP100.exe.html
MSIP965 Platinum(ID 7238):
BIOS ver. 1.22 (Date: 10/24/06)
MSIP965 Neo BIOS ver. 1.67(Date: 09/08/06) :
http://rapidshare.de/files/34366659/7235v167.rar.html
MSIP965 Neo BIOS ver: 16A(Date: 10/17/06)
MSIK8N Diamond Plus BIOS ver. 1.33:
http://rapidshare.de/files/35454120/K8NDP133.exe.html
MSIK8N Diamond Plus BIOS ver. 1.00:
http://rapidshare.de/files/35711075/K8NDP100.exe.html
MSIK9NGM(ID 7252):
BIOS ver. 3.23 (Date: 09/21/06)
temp link for
MSI NX6600GT-VTD128 with temperature monitoring feature unlocked:
BIOS details:
MSI GeForce 6600 GT (VTD) BIOS - Rev 01
Card : MSI GeForce 6600 GT VTD
Chipset : NVIDIA GeForce 6600 GT
Version : 5.43.02.35.07
Memory : 128MB
Download
latest flash program included in archive. how to use:
download and extract file from archive. rename MSI.6600GT.VTD.128MB.Rev.01.rom to more sensitive short DOS name example: NX6600GT.ROM copy all files from extracted folder into your DOS bootable device(USB flash is recommended). reboot machine and boot from corespond device.(boot from your USB Drive)
after booting finished navigate to folder which contain VGA BIOS and your flash program and excute from there:
nvflash_-4_-5_-6_NX6600GT.ROM and press "ENTER" await a few seconds and program will requre confirmation. you will need to press "Y" key to proceed. after that after 10 seconds (CAPS,NUM,SCROLL LOCK will be blinking during update) after compelete procedure should see output message from program: Update complete successfully.
Shutdown PC. await 20 seconds, (to avoid capacitors shock) turned on. you have done.
NOTE: Replace symbol "_"(without quotes) with space in command line.

Unable to use debug mode for x64 application and debug doesn't work when target cpu set to x86

I am attempting to familiarize myself with Visual Basic programming in Visual Studio 2008, using the Visual Basic Guided Tour in Microsoft Visual Studio 2008 Documentation, and have run into a bit of a road-block. When following the lesson "It
Doesn't Work! Finding and Eliminating Run-Time Errors", the IDE does not allow me to edit the code when the debugger hits the intentionally programmed runtime error (divisor set to 0). It gives me an error that "Changes to 64 bit applications
are not allowed". I found some forum postings advising to set the project's Target CPU from "Any CPU" to "x86". However, when I do that, and re-execute the debug process, the debug fails to stop on the overflow/divide by
zero error.
How can I debug my programs when Any CPU/x64 target doesn't allow me to edit the code, and x86 target doesn't appear to recognize obvious runtime errors.

Hi Tim,
>>the IDE does not allow me to edit the code when the debugger hits the intentionally programmed runtime error (divisor set to 0). It gives me an error that "Changes to 64 bit applications are not allowed".
I'm afraid that the VS2008 has a limitation for this feature, I mean that Edit and Continue isn't supported on 64-bit.
Reference:
http://stackoverflow.com/questions/1498464/changes-to-64-bit-applications-are-not-allowed-when-debugging-in-visual-studio
http://blogs.msdn.com/b/habibh/archive/2009/10/12/how-to-edit-code-when-debugging-a-64-bit-application.aspx
But this feature has a improvement in VS2013 now:
http://blogs.msdn.com/b/visualstudioalm/archive/2013/06/26/debugging-support-for-64-bit-edit-and-continue-in-visual-studio-2013.aspx
So if possible, you could test it in the latest VS2013 version.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to stop booting windows in recovery mode (for windows 2008 and 2012 editions)

Hi ,
we are configure hyper-v cluster contain about 100 VM , if a host is down (unplanned failover ) its VM restarted but in the recovery mode on another hosts.
pls tell me How to disable booting in recovery mode ?
thanks,
Ramy Shaker

These two should sort it.
bcdedit /set {default} recoveryenabled No
bcdedit /set {default} bootstatuspolicy ignoreallfailures
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

When my MAC has been in sleep mode for a while and you try and get it started again the mouse makes a splotchy movement across the screen and i have to reboot

When my MAC has been asleep for awhile and I move the mouse it makes this digitized blob run across the screen and erases all below it. The only way I have found to get it to quit is restart the computer. Does anyone know what is making it do this?

okay, you know this is for the Mac pro (desktop mac) rather than the MacBook pro, right? That being said, sounds like you have a problem. Turn off your screensaver, if it's on. if it's a hardware problem, eg the GPU, then take it in. If it's software, try running disk Utility and repair permissions. Failing that, get out your original install dvd's, boot up from them, and try "Archive and Install"
John B

Microsoft optical mice and wheel scrolling in multi-row block

Hi.
One part of our form is a multi-row block. It has a scroll bar and upto this point you can scroll using the wheel when your mouse is on the scroll bar or if the pointer is anywhere within the multi-row block, you can use the wheel to scroll. This works for logitech ball and optical mice, ibm ball mice and even microsoft ball mice. All of them have the wheel. We do find a problem with microsoft optical mice whether its the explorer or optical brand. The wheel mouse works when the pointer is on the scroll bar but it does not scroll if the pointer is within the multi-row block. I have spoken with Oracle and of course they say its microsofts problem. Has anyone come across this? I have contacted microsoft but no word as yet.
Thank you,
Jayme

Forms has no support for the Wheel Scrolling action - if it works at all it's because the Mouse driver is clever enough to work out when it is on a ScrollBar and send the relevant Windows Events. You may find it also works in Multi-line text items.

Valuation mode for QI MIC and QN MIC

Similar Messages

Maybe you are looking for