Value adjustment field in sq01

Hi
There is a requirement to fetch "value adjustment" field (in asset explorer)  in an asset report (designed through sq01, logical database ada).
I tried abumn & value adjustment field gets populated for the asset but I can not trace out the table & the field where it is stored.
Can someone help me in pulling out this data from the table?
Regards
Ravi

Thanks Bernhard.
I have developed sap abap query using sq01. fetched most of the details from ANLAV, ANLZ, ANLB, ANLK, ANLP.
specific reqirement is to include value adjustment field (Ord. Depreciation CY + Ord. Depreciation PY) in this report.
but ANEP provides amount posted with respect to transaction type.
Closest one I reached is: table ANEA with two fields (Ord Dep. CY, Ord Dep PY). There summation can provide the total value adjustment but that I doubt could be of any use.
There is one structure FIAA_COMPARE_VALUES which holds the value but this cant be used in the query.
So, am i missing out on a table which directly holds the value ?
Regards

Similar Messages

  • Activate "Value Adjustment Required Indicator" Field in FMX1

    Hi Expert
    Transaction Code FMX1/FMX2/FMX3 (Earmarked Fund Maintenance), in More Button of earmarked fund line item, there is no Indicator Field for "Value Adjustment Required" marking.
    This is the new SAP client setup. I have config field selection string and assigned. I set Opt. Entry for "_Indicator: Amount Change Only with Value Adjustment Document_" but in Earmarked Fund Maintenenace still not be appeared.
    I would like to use earmarekd fund with Value Adjustment function (FMXPM1 - FMXPM3) so I need to mark the Value Adjustment Required field in FMX1/FMX2.
    Could you please advice, how to show Value Adjustment Required indicator in Earmarked Fund Maintenenace Transaction?
    Rgds
    Ton

    Hi,
    Did you switch "IMG - Public Sector Management - Funds Management Government - Funds Management-Specific Postings - Earmarked Funds and Funds Transfers - Maintain Global Settings" indicator for value adjustment?
    Regards,
    Eli

  • How to adjust fields display width?

    work in jdev 11.1.2.3.
    in the form VISUAL DESIGNER, all fields looks same length, and there is no width attributes to adjust. When it runs, some fields display too long.
    How to adjust fields display width during design?
    Thanks.

    Hi,
    You dont need to redo it again , unless you have changed properties after initial drag and drop.
    If you have changed , use the value #{bindings.yourAttribute.hints.displayWidth} for columns property.
    <af:inputText value="#{bindings.name.inputValue}"
    label="#{bindings.name.hints.label}"
    required="#{bindings.name.hints.mandatory}"
    *columns="#{bindings.name.hints.displayWidth}"*
    maximumLength="#{bindings.name.hints.precision}"
    shortDesc="#{bindings.name.hints.tooltip}" id="it38">
    <f:validator binding="#{bindings.name.validator}"/>
    </af:inputText>
    Thanks,
    Naresh

  • Values from field range

    how to obtain all values in field range of domain?

    Hello,
    YOu can find those values in table DD07L
    Regards
    Naimesh

  • Get value of field object when I double click on any column of report

    Hi,
    We are converting our projects from .NET 2003 to .Net 2008 and upgrading reports10 to crystal reports 2008 and changing our Active x report viewer control  to crystal report viewer.
    We donu2019t use reports just to see and print the data. Our use is a bit more.
    As we were using Active X Control (CRAXDDRT) to perform different operations
    Following are some functions which are included in our requirements:
    1-     We need the columns width to be flexible which we can changed in the code dynamically according to the users wish
    2-     Setting text of some fields dynamically from .Net code
    3-     Hide and show the columns dynamically from .Net code
           Upto here we are done using crystal report 2008 and .net 2008
           Now we are stuck with problem
    4-     When we double click on fieldobject at runtime we are able to fetch the value of field object by using e.objectinfo.text.tostring, so far it is perfect
    But we have different situation here and need a solution for this
    I have two fields like Account ID and Account Description
    I need the solution so that when user clicks either on Account ID or Account Description I should be able to fetch the Field object value of Account ID Column only so that i will be able to open different forms and reports based on that ID
    As we were doing it before using Active X Control the code snippet is giving below
    case "Field: Account. AccountID ", "Field: Account.Description"
    GlobalCode = GiveCode(mYFields.Item(1).value) '------ Where 1 refer to Account ID, so in both cases either we click Account ID or Description Field at run time we are able to return the account ID field value.
    so we need solution some thing like that please do let us know how we can do that
    For Your reference we were using CrystalActivexReportViewerLib10.CRVFields obejct to fectch the report values
    Thanx in Advance
    Regards,
    Arshad Hussain Bhatt

    Hello,
    I am getting value of that cell where I am clicking. But I need the value of other columns also in that particular row where I double clicked. For this I gave one example also that suppose I have a report where there are two columns. One is AccountID and other is AccountDescription. Now if I click on Account ID I get the value of AccountID and when I click on AccountDescription I get the value of AccountDescripiton This is oK n good but I want that If i double click on AccountDescription I should be able to get the value of AccountID also.Please tell me is there anyway to do so?
    We did so when we were using CRAXDRT.Report Bellow is the code snippet for how I did it in that.
    Dim MyField As CrystalActiveXReportViewerLIb10.CRVFields
    Private Function GiveFieldIndex(ByVal As CrystalActiveXReportViewerLib10.CRVFields, ByVal FldName As String) As Integer
    For i as integer = 1 To FldArry.Count
        If FldArry.Item(i).name = FldName Then
                    GiveFieldIndex = i
          End If
    End Function
    Private Sub CRViewer1_DoubleClick(ByVal eventSender As System.Object, ByVal eventArgs As AxCrystalActiveXReportViewerLib10._ICRViewerEvents_DblClickedEvent) Handles CRViewer1.DblClicked
    If MyField.Name = "Field: AdoJV.AccountID" Or MyField.Name = "Field: AdoJV.AccountDesc" Then
    /Following line will give us AccountID in anycase either we click on AccountID or Account Desc or even you can add more column by adding Or Operator. We need something like this in Crystal Report 2008/
      Dim GlobeAddEditCode  as String = myFields.Item(GiveFieldIndex(myFields, "Field: AdoJV.AccountID")).Value
    End If
    End Sub
    Regards,
    Arshad Hussain Bhatt
    Edited by: arshhb on Oct 31, 2009 6:44 AM
    Edited by: arshhb on Oct 31, 2009 7:09 AM
    Edited by: arshhb on Oct 31, 2009 7:13 AM

  • Error  Enter a value for field BP_GUID

    I am using MDG  7.0
    When I create a  Request for "Create ERP Customer",
    I then enter data including the sales Area Data and Company Code data
    Then Submit
    at the following approval step , Sales Area data and CC data is missing.
    I get ERROR message  "Enter a value for Field BP_GUID"
    Please advise what Table or T-code am I missing values for .
    Thanks for your assistance,

    hi,
    See the attached screen shot.
    Regards,
    Tushar

  • Assigning value to field in proxy report

    Hello,
    I am writing the abap report for sproxy.
    The link to the field in structure is very long.
    e.g. it-fault_message_mt-request-calldata-requester-gid = 'Z12345'.
    In the structure one field in calldata is ADDITIONAL_ATTRIBUTE which is of table type.
    I want to assign values to the fields of ADDITIONAL_ATTRIBUTE.
    When I click on field ADDITIONAL_ATTRIBUTE we can see line type ZFAULT_MESSAGE_ADDITIONAL_ATTR and this line type is having NAME as on of the field.
    I want to pass value to field NAME.
    Regards,
    Neelambari

    Hi,
    Create a work area as line type. and loop at table type into work area.
    *wa like line type
    *loop at table_type into wa.
    *wa-name = Value.
    *append wa to target table type.
    ****target table type structure should be  same as that of source table type. *****
    Sachin

  • Write up the value adjustment in Asset Accounting

    Hi All,
    I did the asset transfer with in the company code using T-code: ABUMN
    Old Asset # 1000
    Asset Value Date: 18/04/2006
    Estimated Life time: 5 Years
    Depreciation: Every year: $ 5400.00/12 = $ 450.00 p.m.
    For the current year up to 31 Mar 2007 – Posted Depreciation is $ 5400.00
    I did the asset transfer
    New asset # 2000
    Asset Value Date: 18/04/2006
    Estimated Life Time : 15 Years
    Depreciation Posted  up to  31/03/2007 - $ 1800
    The issue is, after I did the transfer, the book value of the old asset # 1000 has transferred to new asset # 2000, the depreciation has also calculated correctly- $ 1800
    In addition to that, an extra amount $ 450 (Depreciation amount of the old asset #1000 per month) has also deducted the book value of new asset # 2000
    The Current information of New Asset #2000
    Acquisition Value: $ 27000
    Ord. Dep – Posted $   1800 -
    Value Adjustment $      450-
       Net Book Value $ 24750 - But this value is not correct.
    What I need to do that, I have to maintain the book value for the new asset #2000 for the current year 2006-07 is $ 25,200.00 and meanwhile require an entry for that value adjustment $ 450.
    If I want to do write up the value adjustment amount $450 for the current year, the system doesn’t allow to post the transaction and also in FI Doc posting (Because the account that I would like to post is a Recon Account). My company wants to write up in current year only ($450)
    Can you help me to resolve the issue?
    Thanks with Regards,
    Bala

    Hi Murali,
    Well and thank you for your answer and meanwhile you didn't mentioned that How to set back the Recon a/c indicator for the G/L acoount. Because I tried to reset and the system gives the Error message "the account is having balance" and doesn't save.
    But Finally I tried with T-code: OAK5 and result was fine.
    Thank you for your information.
    Bala

  • Is it possible to add value date field in the debit entry?

    Hi gurus,
    I'm an abapper and struggling to be an FI consultant since I have no one to consult with. Here's my issue:
    I want to add the Value Date field in a GL acct debit entry. I used optional in Field status group. It doesn't appear unless if I change the posting key to credit. But if I change it to required entry, an error appears " Rules for posting key 40 and acct 115-30-002 set incorrectly for "VALUT" field . Did I miss anything? As much as possible, I don't want to use the other GL Account (a credit entry) since I dont need it in the program flow.
    Need an expert explanation on this. Sorry I only have limited knowlege with regards to FI concepts.

    Hi
    Feild status at entry time looks for the following combination
    S- Supressed
    D- Display
    R- Required
    O- Optional
    System looks for this above combination at first in Posting Key and then in FSV of account which we enter. For this partical purpose the the feilds in posting key are kept optional.
    Check the feild status of posting key & account T-code FBKP.
    thanks
    Colin Thomas

  • Value date field is missing in MIRO

    Hi Gurus,
    When I insert an account in transaction code MIRO, in tab "G/L account", the system shows the follwing message error: "An entry is required in Value date field for account XXXXXXXXXXX".
    I try to create a variant to display this field but it' s impossible.
    Could you please say me how I do?
    I would insert the value date in MIRO.
    BR.
    Thanks.
    Angela

    Hi Angela,
    there is an old SAP note available regarding your issue: 391683
    It seems the value date has been removed from the MIRO dynpros. (Nvertheless, when you try to change the layout and set value date fo visible, the length of the field is 0. So no use setting it to visible.)
    But you can activate the "Define default value date" in the Company code global data (T001). So for g/l accounts with required entry for value date, the value date is filled with the system date.
    Hope this helps.
    Best regards,
    Stefan

  • Billing doc. NET VALUE & TAX FIELD

    IN THE BILLING DOCUMENT ,CONDITIONS TAB on wat basis does the net value & tax field gets populated i.e what is the customisation done for that fields

    Dear Vipin
    System will understand <b>ONLY</b> based on the value you are assigning in the fields "<b>From" and "To".</b>
    For example, my sales price would be lke PR00 + 2% of PR00 towards Packing.  Now you have to define your pricing procedure in such a way that your duty is PR00 + 2% of PR00.  Assume I define "Step 100" for PR00 and "120" for Packing. In the next step, you create one column called "Sub-total" in Step "130" and in "From" tab, you have to give 100 and 120 in "To" tab.
    Now for tax calculation, you have to take the "130" step value and assign 130 in both "From" and "To" column.  By this way, you have to assign.
    Hope this is clear to you now and if so, reward points please.
    Thanks
    G. Lakshmipathi

  • Does Access 2013 Web App support multi-value lookup fields?

    I hope someone can please help me with this as I've not been able to find the answer by searching this site, nor elsewhere on the web. I have Access 2013 open connected to my web app on Sharepoint Skydrive with a table open in 'edit table' mode. When I add
    a new lookup field I don't see any option to make it a multi-value lookup field. Is there no support for that in web apps or am I doing something wrong?
    Cheers, Henk.
    Cheers, Henk.

    This is what I use in the Parent RowSource:
    This in the parent child relationship
    In the row source query from the child, I have a simular expression. By inverting the boolean 'childToggler' I can force the child-form to requery. Because the boolean is in the session table record (which is part of the child form recordsource query as
    well), the boolean will be inverted in both and won't disrupt the relationship.
    Besides the toggler this relationship only contains an ID with preceding zero's, but the expression can contain pretty much everything. 

  • Value date field BSEG-VALUT

    i want to populate BSEG-VALUT field at customer line item when i am using FB01.But i can populate only at GL account line item.Can some one tell me how can i populate Value date field at customer line item.I checked all the field status groups and its still not showing up.
    Regards,
    Nettem

    Hi Nettem
    this field will be taken from the field status of the reconciliation account. So check the reconciliation account in the customer master data and then the field status group on this gl account. This should help you to find out.
    please assign points if useful
    rgds Adi

  • How to pass variable value to field of standard sap transaction.

    Hi Experts,
       i want to pass the value of variable to field of standard sap transaction. but that field is not having the parameter ID. so please tell me how i pass the value to field.
    thanks in advance.

    You might like to provide a few more details of which field and transaction you are trying to interact with... typical solutions involve user exits / BAdIs / Enhancements, or transaction variants, or building a BDC to part fill the screens of the Tcode you are calling.
    Jonathan

  • Add field in sq01, infoset query.

    i am trying to create a virtual field in sq01. i am creating a infoset query where i want to add two fields and need to displayed in the report. how can i do that without enhancing the infotype? i just need to add two fields and need to be displyed in third field. i want to add some logic of addition to those two fields and the result need to be stored and displayed.
    Message was edited by:
            shahid mohammed syed

    Hi ,
    I have got a query in AD-HOC query.
    After creating the Adhoc query using the join table functionality the resulting adhoc query does not results any out put.
    What I have done is :
    1.Created a user group through SQ03
    2.Attched user to My user group
    3.Created an infoset using join table functionality(SQ02).
    4.Saved and generated the infoset
    5.Added the user group to the infoset and than run the ADHOC query.
    The table I have used to join is all PA table (For test pupose)
    Though the purpose of the custom infoset is to join PA,OM and E rec infotypes, for testing purpose I have joined only PA infotypes.
    Result:The adhoc query does not gives any out put instead it says no data could be read.
    Could you please tell what else I need to do so that the custom infosets gives an out put.
    Will greatly appreciate your help.
    Thanks and best regards
    Rajeev

Maybe you are looking for