Value category description not appearing in PM WO

Gurus,
On the cost overview tab of a PM work order, one of the value category description isn't appearing like the others. I thought it was a translation problem but am logged in EN and all descriptions are entered in this language (OIK1).
Any clues ?
Cheers
Olivier

There are actually 2 problems:
-> Value category DESCRIPTION linked to stock materials GL account does not appear in cost overview tab as mentioned before.
-> Value category line linked to internal maintenance GL account does not appear AT ALL in cost overview.
Although, when i launched the report planned/actual everything is there.
Matt -> Where can i check about the value category being assigned to a specific currency ?
Murray -> was actually a problem earlier with a one of the GL accounts assigned to a value category (the one for internal services). It wasn't created on the controlling area i work with. I created it, runned OIVC again and now all traffic lights are green but my value category doesn't appear AT ALL in the WO cost overview.
Thanks for your help

Similar Messages

In case of Factory sales, ECS values alone are not appearing

Hi friends,
In case of Factory sales, ECS values alone are not appearing in the sale order
and billing document even after maintaining excise rates in J1ID as 2% and condition
record as 100% for both JECS and JECX condition types, finally I checked with tax
code but still I am facing same problem. But same 2% values are appearing in J1IIN
screen.
Please help me out in solving this problem.
Thanks and regards,
Swamy H P

Dear Swamy
Ensure the following in your pricing procedure, for condition type JECS.
- The "From-To" step number should be the step number of JEX2.
- The Calculation Type should be 366
- For JEX2, Calculation Type 353 and Account Key EXD are maintained
thanks
G. Lakshmipathi

GL & PC description not appear in report painter (ECC6)

Dear Expert,
kindly help me on this issue. GL description and Profit Center description not appear in report using OFL Table.

Hello sayujya Patil,
Thanks for your reply, i have created report in Report Painter, after execution the report i tried in all the parameters under setting menu > report and section layout as well> lead column --> and kept the radio button on key and description, still its not showing the description of the GLs under lead column....
Please reply...
Thank You.

Where can I find the value category description

I need the the value category description as well as the value category. Value category I found on table PMCO-ACPOS. do you know where the description would be held?

You can find in the table TPIR2-KTEXT.
Regards,
Elza

Variable description not appearing in variable screen

Hi Experts,
we have created a variable which is ready for input. While executing the query, the variable description is not appearing in the variable screen, instead variable technical name is only appearing in the variable screen.
The same variable is being used in two queries. In one query, it displays the technical name and in the other query it displays the description of that variable.
your solution would be greatly appreciated.
Thanks,
Franks

yeah......it is strange. As soon as the variable screen comes up, all the variables normally shown in description rather than a technical name, unless you select "Key & text" OR only "key" OR only "Text".
But, in this case this particular variable is showing in technical name, the description itself is disappearing from the variable screen.
No changes have been made to variable. The same variable displays with descriptions in other query. so difficult to analyze.

Condition value of JMOD not appearing in the sales order.

Hi all,
Im encountering a peculiar situation where the conditon value of JMOD is not showing up in the sales order..It is however showing the tax rate.. Pls suggest.
thanks and regards
Joe

Hi joseph
some soution for you I googled for you
one example like yours i am just copying and providing info for you i dont know whether i can copy link or not here
here is the solution
I'm using TAXINJ procedure with JFACT as the pricing procedure for sales.
Here, I've maintained in FTXP, for IN00 and taxcode V1(new one defined),
taxes as desired and JMOD = 16%, AED as 2%.
But these values are not getting picked up in the pricing in sales order.
I'm keeping UTXJ correctly. I tried with % of UTXJ with 100%.
In the pricing analysis, I see that the condition record for JMOD is found correctly with 16%.
But it appears in the condition items as 0%
solution:
Check whether you have maintained the tax classification in material master and also check whether u have defined the same tax classification in VK11 for UTXJ, where u assign the Tax code.
Also check for customer tax classification. And check what you have maintained in J1ID. System will first search for values from J1ID, and then in FTXP.
And have you a sales pricing condition like JEX2 which is a copy of JMOD ? The value of JEX2 gets posted for Excise account key. This ensures that the cost accounting of excise value paid is done correctly - account key EX2.
I'm maintaining TAX classifications correctly in the material master, customer master and final tax classification for plant also is set correctly.
As I told, JIN1, JIN2, JIN4,JIN5 are picked up correctly and calculated. Problem is only for Excise.
And these values are getting copied initially, before I put PR00 manually.
Once I put PR00, all the conditions are set to zero back
Then after entering the price manually, u do the update pricing in Conditions View.
See, I have not altered any thing in the standard JFACT procedure. That means sales condition is there for JMOD to enable account posting..
Now, I've changed Tax category in OVK1, and put UTXJ alone there and now, JMOD is getting picked up and is calculating the value..
But note that I've maintained 10% as JMOD in FTXP.. and 8% in the J1ID excise rate maintenance for chapter ID.
Can I do away with Excise rate maintenance for chapter ID. So that I will get the % maintained in the FTXP..
did the tax code pick up correctly... did u maintain the chapter Id and excise rate fro teh chapter ID
I could solve the proble..
In the excise group assigned to the plant, I had to check on the indicators, SED and AED.
Hope its clear your issue.
Regards,
Krishna.

New description not appearing in analyzer

Hi,
We have changed the description of two navigational attribute in the query and traported to production system. These changes are appearing in the query designer but not in analyzer when we execute the query.
We have trasported the query through overwirte mode also but chnages are not reflecting in production system.
We are facing same problem in the web portal as well.
Any pointer on this is highly appreaciable.
Thanks,
Meghana

Hi
Coudl you check if the master data of the navigational attributes in teh production system has texts along with the Key.
If yes, open the query in Analyzer and select the navigational attribute and dispaly teh Properties>General Tab>Display and also check the Text Type.
In the Wed also try to display the Text instead of Key.
Regards, Hyma

Planned revenue in PS report for Value general contract not appearing

Dear all,
i am assigning the WBS element in my value contract general.I need to get this value reflected in the PS report S_ALR_87013542 in the planned revenue .i am not able to acheive this.i am using a service material with item cat TAD.
when i create a sales order type ZOT copied from standard order OR and assign the WBS element i am able to get the planned value in the above PS report.could anyone guide me how to get the same in value contract general.
thanking you,
Best regards,
R.Srinivasan

Kindly do following checks
check your planning/Revenue profile i.e. OPSB whether revenue from Sales Order is ticked in that.
Also checkk if WBS is a billing element.
Check Tcode OLPE.
If problem, still persists, then refer following SAP Notes
- Note 96404 - VA01/21/41: No quotation value/order value/planned revenue
FYI - How does the planned revenue update for contracts work?
Contracts have customer quotation character - their planned revenues are reduced completely by the first contract release order.Since the value of the first contract release order does not correspond to the complete contract value in general, the planned revenue is consequently reduced.
Thanks & Regards
JP

Values Set does not appear in Input Element Entry (Com. and benefits)

Hi all
I have created one values set, but it does not shown, wenn i selecting this values set in Element Entry. Pls. give me some advices.
Thanks

Hi JIGAR BHATT,
Please have a look at below SPRO paths and verify it...
IMG menu path
SPRO->Financial Accounting->Financial Accounting Global Setting->Tax on Sales/Purchase->Basic Setting->Define Tax Juridiction
SPRO->Materials Management->Logistics Invoice Verification->Incoming Invoice->Maintain Default Values for Tax Codes.
Also have a look on Documentation which is available at the above path of SPRO
And also ask to BASIS and Functional Consultant if they can help you out for it.
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

Plan value(break up) not appearing in sales order cost report

hi
I have done sales order bom in cs61,operation in ca01,in va02 for sales order costing in itemization showing like
material 100
actity 10
total 110
saved and if I see in cost report it show only revenue , cogs(110),but it is not show raw materials and operations.
please advise me what to do?
Thanks and Regards,
Nagesh

Dear Nagesh,
Probably, you need to check the status of the BOM and the Routing in the Header. It should be active/released.
Kind Regards
Umapathi G
Edited by: Umapathi Naidu G on Aug 11, 2011 3:26 PM

Region Description not appearing in Infostructure in MCSI

Hi
I have created new infostructre where i have included "Region" (MCVBRK-REGIO) as a characteristic which is picked up from field catalog SD: Sales org. (billing doc.). but when i exeucte report i m unbale to see the region description but only the region code
Eg. Region code: 14 & its description as Andra pradesh. The report shows only region Code 14.
Pls advice
Rgds
VK

Hi,
You can populate the description with enhancement RMCSTEXT. You have a coding demo for module function EXIT_RMCSTEXT_001.
I hope this helps you
Regards,
Eduardo

While doing invoice verification, for fright value tax code not appearing

Hi All,
While doing invoice verification for PO which is having fright conditon, system is not displaying tax code in invoice.
Every time user has to select manually in the invoive verification.
Is there is any config missing for that fright condition?
Thanks in Advance.
Anil

Hi
If you wish to default the tax code for the planned delivery costs this
must be obtained from an independent source which is OMR2.
With OMR2 it is possible to default the tax in the delivery cost
line + header tax. It is not possible to default only in the delivery
cost line. The header tax needs to be changed manually to support the
different tax codes in the item lines.
Best regards
Erika

Bookmarks not appearing following an iCloud sync

I categorized my bookmarks in folders on my PC for easy retrieval. In some cases I have nested categories 2 or 3 levels deep. After I sync my bookmarks from my PC with my iPad via iCloud, the bookmark folders appear, but the bookmark URLs themselves, within each bookmarked folder category, do not appear in Safari on my iPad. I tried syncing both using the IE and Safari bookmarks to my iPad. In either case the bookmark URLs do not appear in the folders. Anyone had this issue and resolved it? Thanks.

Try to turn off Bookmark sync Settings > iCloud.
Close Safari, restart iPad, turn on Bookmark sync.

In the networking window the Computer item does not appear

I have network sharing turned on but the Computer category does not appear in the networking window. Any ideas how to add this category to the network window in windows 8.1?????

Mfrakes,
It’s possible that you’re not seeing the computer category simply because there aren’t any computers to list.
Make sure that the computers you’re expecting to see are powered on and connected to your network.
Another thing to ensure is that network discovery is enabled.
In order to enable network discovery in Windows 8.1, start by right-clicking on the Network system icon in the taskbar notification area, then click on Open Network and Sharing Center.
Next, in the left pane of the Network and Sharing Center window, click on the Change advanced sharing settings link.
The next window that comes up will give you the option of turning network discovery on.
I hope this helps!
Mike
Windows Outreach Team – IT Pro

KE30 - Characteristic in layout does not appear description

Hi all,
I have a query on my KE30 report where by the description of the characteristic does not appear as selection in change layout for object list display. For example, charateristic "customer" only appear value but there is no field in the selection to appear the customer name. I've checked in KEA5 and ALL characteristics has been set as "Not assigned" in display option at 'further properties' work area.
Appreciate your assistance on this.

Hi
Once you have run the report in object list, click on the choose fields (the third last icon on the 3rd bar)
Select the text for each of the characteristics.
You can save the layout for future use
Hope this helps
Kind regards
Dawn

Value category description not appearing in PM WO

Similar Messages

Maybe you are looking for