Values in [ ] on query
hi,
I have designed and executed inventory management query. Some KF values are displayed like that [100] What does it mean?
Regards,
Andrzej
hi aksik,
You can do Formatted Reporting : Crystal Reports Integration .
http://help.sap.com/saphelp_nw04/helpdata/en/27/c3fa3a00b0a452e10000000a11402f/frameset.htm
[100] means Positioning Query Cell Areas .
hope it helps. Following link give you some ideas about displaying query.
http://help.sap.com/saphelp_nw04/helpdata/en/f9/73303e8e229a0be10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a5680e09411d2acb90000e829fbfe/frameset.htm
Thanks
Varun
Similar Messages
-
CHAR's value in the query but not in the report??
Hi all,
I loaded master data and crm transaction data from ODS to Cube. The data is in the cube but there is no value in my report when running it. EX: there are some CHARs in my report, I checked those CHARs have value in the query but it shows 'not assign' in my report when I run it. What happen?
Thanks.
J.Please see below text and also the sent link..
If a navigation attribute is used in an aggregate, this aggregate has to be adjusted using a change run as soon as new values are loaded for the navigation attribute (when master data for the characteristic belonging to the navigation attribute is loaded.) This change run is usually one of the processes that are critical to the system performance of a production BW system. This is why, by avoiding using navigation attributes or not using navigation attributes in aggregates, you can improve the performance of this process. On the other hand, not using navigation attributes in aggregates can lead to poor query response times. The data modeler needs to find the right balance.
http://help.sap.com/saphelp_nw04/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm
cheers,
Vishvesh -
Dynamically passing the values to IN query in JDBC
Hi,
I have a list which contains a single or multiple values which does have CustomerVO as a generic.Here i need to iterate the list pass these values to "IN" query.
These should happen dynamically, as we dont know whether the list will hold a single or multiple value. If the list.size ==1 , then it contains a single value in it. Hence there is no need for a comma(,) in the IN query else we need to have it, like .... IN (Aaron,Bob). Please help me in this?
Thanks.797836 wrote:
I have a list which contains a single or multiple values which does have CustomerVO as a generic.Here i need to iterate the list pass these values to "IN" query.
These should happen dynamically, as we dont know whether the list will hold a single or multiple value. If the list.size ==1 , then it contains a single value in it. Hence there is no need for a comma(,) in the IN query else we need to have it, like .... IN (Aaron,Bob).So basically you need to output the List (capital 'L') as a comma-delimited list (small 'l').
The procedure for that is usually something like:
1. Output the first element.
2. For any further elements:
2a. Output ","
2b. Output the element.
Winston -
How to use Item value in chart query
Hi Folks,
I am looking to use calander item value in sql query used to populate flash chart. I tried with following query where P2_DATE1 is the calander item name. This says no data found. I am not sure if I am missing some thing with BUTTON settings which I am using to put data into chart.
Select null "link",to_date(entry_date,'dd-mon-yy hh:mi:ss') "Time in GMT", to_number(load_avg_5,'99.99') "Load Avg 5 Min" from oracle_ocm.top_load_avg --where trunc(entry_date)=:P2_DATE1
I am new to APEX
Please helpHere are few things for you to try:
Hardcode the value and see if it works. "where trunc(entry_date) = to_date('01-May-2010', 'dd-Mon-yyyy')". If it works, then click Session link at the bottom of the page, and check the value of the item P2_DATE1. If null, then you have a problem. If not null, please ensure that you use TO_DATE function as shown above with proper format mask.
Good luck.
Ravi A -
How to get the max value in the query??
Plant calday(mm.dd.yyyy) Soldout.Qty
0001 01.01.2005 10
0001 01.02.2005 20
0001 01.03.2005 05
0001 01.04.2005 16
0001 01.05.2005 10
0001 01.06.2005 14
From the above values , how can i findout Max(Soldout.Qty)(i.e 20) for the above week...Suppose present aggregation = summation...How can i findout the value in the Query??don't want to do changes to design...Hi Bhanu,
I tried the calculation results as...Maximum,..
But that will pick the maximum value among the avialable values..like
plant1 max 10
plant2 max 20
plant3 max 30
then it will show as..
plant1 max 30
plant2 max 30
...like this...but my case is
plant1 calday1 10
plant1 calday2 05
plan1 calday7 08
plant2 calday1 10
plant2 calday2 05
plan2 calday7 20
so for each set it need to bring the maximum value... -
Select more than 60 values at a query isn't possible?
Post Author: fmonsma
CA Forum: WebIntelligence Reporting
I can't select more than 60 values at my query. We got id numbers. I want to select the name, adress, zipcode etc. of for example 80 id numbers. BO doesn't allow me to make this query. In SQL it's no problem.
The only thing i can do is to make a query with all id numbers and in the report itself i can select this more than 60 values. This is not very handy if you havemore than 150,000 id's in your databases.Rather several select fields because single returned value is a functional limitation of <select>.
-
Using item values in the query
Hi,
Is there a way I can use item values in the query...?
as an example, something like this
select a.*, :P20_CUST_NAME as CUSTOMER_NAME
from
table TEMP a;
haven't tried it yet but want to get the feedback first before making an attempt...
ThanksYes, as long as that item has a value in session state..
Thank you,
Tony Miller
Webster, TX -
Restrict the values in the Query Designer
Hi Gurus,
I want to Restrict PLANT or SALES ORG values in the Query Designer, in the Query, PLANT has selected in the rows and having variable and SALES ORG is display attribute of the PLANT. In this scenario How can we Restrict the values?
Thanks in Advance,
Ravi.Hi Ravi,
You cannot restrict values on the display attributes. Better change it to navigational attribute and check the box as navigational in the cube.
Regards
Ram -
Set value in af:query with value from method
hello all
i have problem, when they want set value in af:query (inputText) with value from method, how to do that?
anyone help..?
thx
agungdmtHi,
are you facing this issue when you try to show few values on right side (selected list) of shuttle component.
what is your usecase exactly ? -
Send values to IN query with parameter
Subject: send values to IN query with parameter
Hello. Hope I'll explain my problem well enough:
I have a query:
-- select id from table where id in ('100')
Now I used parameter for the IN part:
-- select id from table where id in (:param)
and I gave the parameter the value 100.
now I want to have the query with two values:
-- select id from table where id in ('100','200')
I tried to use the parameter and give him the value of: '100','200'.
It didn't worked :(
Is there a syntax to give the parameter more then one value for the IN query (with out using another table or function etc')?
Thanks in advance,Roy.This is the best solution I have for it.
variable parameter varchar2(4000);
exec :parameter := 'SYSTEM,SYS';
select username
from dba_users
where username in ( select COLUMN_VALUE from table (split_string(:parameter,',')))It uses this function
CREATE OR REPLACE
type string_table as table of varchar2(4000)
CREATE OR REPLACE
FUNCTION split_string (
string IN varchar2,
delimiter IN varchar2
) RETURN string_table IS
tab string_table;
pre integer;
post integer;
step integer;
i integer;
BEGIN
pre := 1;
step := length(delimiter);
i := 0;
tab := string_table();
loop
tab.extend;
i := i + 1;
post := instr(string,delimiter,pre);
if ( post = 0 ) then
tab(i) := substr(string,pre);
return tab;
end if;
tab(i) := substr(string,pre,post-pre);
pre := post + step;
end loop;
END;
/Bye Alessandro -
Text Box Value in the Query Bind Parameter
Hi
I have to use text box value in the query bind parameter
Thanks to help...Hi,
- drag Execute with params
- use EL
Frank -
Passing Multiple Single Values from Sender Query to Receiver Query in RRI
Dear All.
We have 2 - Bex Reports ZBEX_1 & ZBEX_2
1. In ZBEX_1 having the fileds data like the below.
Account Doc. Number - Clearing Document --- Amount
12345 - 65432 --- 100
12346 - 54321 --- 50
2. In ZBEX_2 having the following data.
Account Doc.Number -- Amount
45342 - 10
66666 - 100
65432 - 10
54321 - 5
3. I am Traying to create RRI Between ZBEX_1 & ZBEX_2 , with Sender query as ZBEX_1 and Receiver query as ZBEX_2
If I drilldown from ZBEX_1 need to show the following output in the ZBEX_2
Account Doc. Number - Amount
65432 - 10
54321 - 5
i.e If Clearing Documnet in the ZBEX_1 is same as Account Doc. Number in ZBEX_2 those Account Doc. Numbers I have to show in the output of ZBEX_2 RRI Report.
Both the records I have to show at a time.
So please suggest me
1. How to pass Multiple Single Values to Next Query using RRI
2. How to Map Clearing Document to Account Doc. Number in RRI.
NOTE: Account Doc. Num length is same as Clearing Document
Please suggest me.
Thanks & Regards,
Kiran ManyamYour scenario of passing values from multiple records in Source does not suit well for RRI Jumps.
In ZBEX_2 query, create a Replacement path variable on Clearing Document. In that Replacement path variable, use the Replacement with query option and choose the ZBEX_1 as the underlying query source.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/bd/589b3c494d8e15e10000000a114084/frameset.htm
When you execute ZBEX_2, what ever clearing document values that ZBEX_1 has will be passed through the replacement path variable as a filter to the ZBEX_2
Hope it helps!
Uday Pothireddy -
Workbook selection screen shown diffent value than its query selection scre
My work book contents only one query.
But the selection screen of work book gives me pop-up as 45.2008 for calweek as default value while my query was showing me 04.2009 is value of my current calendar week.
Regards,
KrunalKrunal,
When you say pop - up, do you mean the variables screen?
Are you saying that the variable has a default value of 45.2008? Is it a Customer Exit / SAP Exit variable or an input variable?
Regards
Gill -
How to get constant Value through RSQL Query
Is it possible to get constant value in rsql query?
Eg: select bBU, 0 Dummy column, part_number from test_rsNo. This is not available in IOP. What do you want to achieve using this?
-
How to Sort by the length of the returned value from a query.
Hi,
I was wondering if it is possible to sort by the length of the returned value from a query?
For example if I want to get a list of people with the name 'Samuel', I would like to short by how short the length of the whole name is.
Sort by length of the name in SQL
Samuel Syda
Samuel Indranaka
Samuel Johnsons
Samuel Longhenderson
Thank you.Hi,
Sorting is done by an ORDER BY clause at the end of the main query.
In most cases, you can ORDER BY any expression, even f it is not in the SELECT clause. In this case, it sounds like you just need:
ORDER BY LENGTH (name_column)
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
Post your query, using an ORDER BY clause like the one above, and point out where that query is producing the wrong results, and explain, using specific examples, how you get the right results from the given data in those places.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002 -
How to Pass Multiple Value Range From Query ?
Hi,
I have searched over SDN to find about how do we pass multiple value ranges from Query to SAP ODATA?
But I have not found suitable answers so I am posting it here.
If we need to pass a date parameter in Query which has a multiple range like sales orders created date between 03/02/2014 to 05/07/2014.
How do we phrase it in Query ?
I tried as below but the IT_FILTER_SELECT_OPTIONS of /IWBEP/IF_MGW_APPL_SRV_RUNTIME~GET_ENTITYSET does not get filled up with the parameters
How do we pass multiple values in Query?
http://ctnhsapapp16.corp.ken.com:8000/sap/opu/odata/sap/ZCHAKRABK_MAINT_ORDERS_SRV/Maint_Orders?$filter=Maint_Plant eq 'US19' and B_st_dt gt datetime'2015-02-01T00:00:00' and B_st_dt lt datetime'2015-02-28T00:00:00'
Thanks in Advance.
KC.Hi,
I Have Found solution to the Query posted above.
Please find the URL's below for more clarifications.
Revert for any suggestions please.
http://ctnhsapapp16.corp.ken.com:8000/sap/opu/odata/sap/ZCHAKRABK_MAINT_ORDERS_SRV/Maint_Orders?$filter=Maint_Plant eq 'US19' and ( B_st_dt ge (datetime'2015-02-01T00:00:00') or B_st_dt le (datetime'2015-02-27T00:00:00'))
http://ctnhsapapp16.corp.ken.com:8000/sap/opu/odata/sap/ZCHAKRABK_MAINT_ORDERS_SRV/Maint_Orders?$filter=Maint_Plant eq 'US19' and ( B_st_dt ge (datetime'2015-02-01T00:00:00') and B_st_dt le (datetime'2015-02-27T00:00:00'))
Thanks KC.
Maybe you are looking for
-
My computer crashed and I had to completely restore my computer and need photoshop to be running quickly I am in school right now and have projects I have to be working on. How do I re-install the programs and validate them because they come up as tr
-
I have an eMac I no longer use. Any advice on how to dispose of this eMac?
I have an eMac from 2002 and have upgraded to other Mac products sionce then. I would like to dispose of this computer but don't want to expose myself to anyone that could solicit information from my files. Does anyone out there have any advice for
-
Problems w/MS Office 2008 & Google Earth Ever Since Snow Leopard "Upgrade"
I probably should have checked this forum before taking my son's advice to upgrade from 10.5 to 10.6. Ever since this upgrade, I've had repeated and frustrating problems with two applications: MS Office 2008 for the Mac and Google Earth for the Mac.
-
Templates Not Working - Layouts Missing
I have several Templates with Layouts. Almost all of the templates work well when a new meeting is created from them. However, one of the templates seems to fail when a new meeting is created from it. I get a blank layout with a single Notes pod, wi
-
Intermittent in vm 4 on the weblogic 8
I have intermittent in vm 4 on the weblogic 8. My application work better when I down vm 4. What I need to do to know what's wrong on vm 4?