Values not passing from form to context attributes (value attributes)

Hi Experts,
I have bound the properties of theadobe interactive form (WD-Java) to the context attributes but the values are not passing to the value attributes at runtime.
For your information I have not bound the pdfsource binary attribute of the view to the custom controller pdfsource binary attribute.
Please advise.
Thanks,
Shobhit

Context
   GetData - ModelNode mapped to controller context (DataSource)
         Attribute1 - Value Attribute (Form Field)
Is it allright to have the Data Source as a ModelNode (mapped to the controller context node) and then have Value Attributes under the ModelNode which are then bound to the adobe form input fields.
I know its frustrating to advise on such questions without looking at the code actually. But I would definitely need your support.
If possible could you mail me a project of yours where you have the form being PREFILLED with some values coming from a RFC FM and then the same form gets posted to SAP though another RFC FM.
Thanks,
[email protected]
OK. When I create a Fresh Adobe Interactive Form application, it works fine.
The problem Im facing is in the case, when Im using an existing PDF file created in the ABAP stack (TCode SFP). I am importing this PDF file into the WebDynpro Java Application and then binding the fields. So in this case the context binding does not work.
You guyz are right, I need to check if there is any other script which exists. But still what are views after this update?
Message was edited by:
        Shobhit Swarup Mathur

Similar Messages

SAP HCM P&F - Update an infotype field which is NOT passed from Form

Dear Experts,
I have a requirement to update the Infotype with the entries in the HCM form (input by Employee in ESS) upon Manager's approval in MSS.
We are achieving this functionality using HCM P&F (FPM) with an Workflow associated. In this Workflow Standard Task (TS17900108) is used to Save the form data into the Database.
But there is one field (APPROVED_DATE) in the Infotype whose value is not from the FORM but should be updated in the Infotype.
Please help me with your inputs.
Regards,
Shankar

Dear Christopher,
I am extremely thankful to you for all the replies. But, unfortunately, we are messed up with this requirement and we couldn't achieve it.
In this regard, could you please give us the step-by-step procedure to achieve this functionality?
Requirement in brief again:
We have designed Overtime HCM form (FPM) using which employee requests for the Overtime. This form is sent for the Manager for approval. We have achieved this functionality. With the Manager Approval, the database is also updated perfectly.
Then we have added one more field in the infotype to track the Approved Date. This field is to be updated along with the other fields (sent from FORM) upon the approval of the manager.
And now though the other fields are updated correctly into the infotype, the approved date is not updated.
Thanks a ton in advance for your guidance as this is very critical and urgent requirement for us.
Regards,
Shankar.

Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)

Hi,
Did the issue happen only for you or for multiple users?
Make sure phone update to the latest firmware.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Forms 6i - Types of parameters, which can be passed from forms to reports?

Hello all,
Can somebody tell me about
Types of parameters, which can be passed from forms to reports?
plzz

Please ask this question in the appropriate forum for [url http://forums.oracle.com/forums/forum.jspa?forumID=82]Oracle Forms.
Regards,
Rob.

Do not pass from sign in page

I down loaded Elements 12, it is installed but do not open. Do not pass from sign in page. I have windows 8 OS.

Hi Jeff. Yes, I was prompted to enter my Adobe ID, after that the program did not continue. It only show a little circle spinning on the lower right. But after 5 minutes it still was spinning.
De: Jeff A Wright [email protected]
Enviado el: martes, 10 de diciembre de 2013 11:57 a. m.
Para: panamito
Asunto: Do not pass from sign in page
Re: Do not pass from sign in page
created by Jeff A Wright <http://forums.adobe.com/people/JeffAWright> in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/5917358#5917358

My iTune Match does not pass from step 1

My iTunes Match does not pass from step 1. Every time I start it I get an error msg (4010). Does anybody knows whats the problem?

There is a robust discussion about this here:
https://discussions.apple.com/message/18858414?ac_cid=tw123456#18858414

Field Value not passed from IDOC (orders01) to File Generated

Hi All,
I have added a custom field to a PO at item level (ekpo-Ztest)and Passing it to OUTBOUND IDOC.
In process of passing to IDOC(ORDERS01) i mapped the field to segment E2EDP19001-MFRPN and i see the value in the IDOC when i view it in WE02.
The problem is when i generate a file i don't see the value of E2EDP19001-MFRPN
We are already using QUALF,IDTNR,KTEXT of E2EDP19001 and i see all the values of these fields being passed from IDOC to file generated .
Let me know as i'm missing anything in here
I quick note ,
I see 3 version for E2EDP19 Segment for orders01
Vesrion
002     E2EDP19002                             8     242     02/14/2005
001     E2EDP19001     40A                    5     160     08/19/1997
000     E2EDP19             30A                     3     108     04/03/1995
1)The version 000 and 001 are released but not 002 Version
2)May be i 'm using version 000 and its out put length is only 108 and these fields(QUALF,IDTNR,KTEXT) together occupy 108 and there is no room for my new field but My IDOC dispalys E2EDP19001 and E2EDP19002 and also it displays my new field but its the output file generated that doesn't show the value
Thanks

Resolved Myself
Thanks

Oracle forms 10g Parameter passing from forms to reports

Hello Room,
Please let me know what is wrong with this code. It is not passing parameter at all to the reports 10g parameter form from forms 10g, no matter what. I tried to delete the parameter from reports parameter form, I also tried to enable/disable restricted values from reports, I tried to hide the parameter from reports, but it is just not doing it.
DECLARE
pl_id PARAMLIST;
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
report_job_id VARCHAR2(100);
fill varchar2(100);
reportname varchar2(200);
ab varchar2(200);
cursor c200 is select CONAME,LOCATIONMASTER.LOCNAME FROM USERCODETL,MULCOMP,LOCATIONMASTER
WHERE MULCOMP.CO=USERCODETL.CO
AND USERCODETL.USERID = SUBSTR(AB,1,50) AND USERCODETL.LOCCD = LOCATIONMASTER.LOCCD;
begin
AB := GET_APPLICATION_PROPERTY(USERNAME);
OPEN C200;
FETCH C200 INTO :block4.coname,:block4.locname;
CLOSE C200;
synchronize;
pl_id:=GET_PARAMETER_LIST('paramlist');
IF NOT ID_NULL(pl_id) THEN
DESTROY_PARAMETER_LIST(pl_id);
END IF;
pl_id:=CREATE_PARAMETER_LIST('paramlist');
Add_Parameter(pl_id, 'vcompany', TEXT_PARAMETER, :block4.coname);
Add_Parameter(pl_id, 'vlocname', TEXT_PARAMETER, :block4.locname);
repid := find_report_object('testreport');
fill := GET_REPORT_OBJECT_PROPERTY(repid, report_server);
reportname := GET_REPORT_OBJECT_PROPERTY(repid, report_filename);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repsrv');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no'||'vcompany='||:block4.coname||'vlocname='||:block4.locname);
v_rep := RUN_REPORT_OBJECT(repid,pl_id);
WEB.SHOW_DOCUMENT('/reports/rwservlet?report='||reportname||'&desformat=pdf&destype=cache&userid=scott/tiger@servernew&paramform=yes');
END;
Please help. Thank you in advance.

Hello Inol,
Greetings !
There seems to be a syntax error when I run your code:-
REP-52251: Cannot get output of job ID 272 you requested on Fri Apr 08 02:37:25 GMT 2011.<P>REP-51026: No output for job 272
when I run then command:-
http://local-pc:8889/reports/rwservlet/showjobs
Terminated with error: <br>REP-159: Syntax error on command line.
Is there a error on your statement ?
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1) ||'?server=repsrv );
it should be
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1) ||'?server=repsrv ' );
then only it is getting compiled properly. A single quote in the end !
And finally I changed this line
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no p_1='||:SP_USERCODE 'p_my_second_parameter='||:block.my_second_parameter);
to this line
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no p_1='||:SP_USERCODE|| *'p*mysecond_parameter='||:block.my_second_parameter);
as it is giving error where highlighted in bold Is it necessary to change and add a concatenation there ?_
But... But... even though I compile it properly the code is getting executed and it is giving the above error. Please note the same.
Also please tell me what should be the status of the following things in report builder 10g.
1. Shall I remove the parameters vcompany and vlocname from the parameter form and keep it just in parameters of report , There is a third parameter which I want the user to input while running the report other than these 2 parameters ?
2. Shall I restrict the parameter to predetermined values ?
3. Shall I hide the first column of the parameter in report builder.
I have also tried to simulate the execution parameters from batch to runtime and comm mode to synchronous and asynchronous and vice versa. I have also given command rwserver server = repsrv on my pc and also server pc. please let me know about this also whether I need to give this command every time ? I mean for every booting ?
As this problem is faced by many people. I think it should work across the fly as given by you or rather corrected by you. I would also like to know is there any patch available for the same released by oracle, as I have read somewhere in the forum here which I cannot locate the thread now. I do not mind paying for support if I find the need ?
Please help me further. Thank you.

Not able to get the context attribute set in ServletContextListener

Hi all,
I have written a simple ServletContextListener and set an attribute in it. when i am trying to retrieve the attribute value in my servlet, I am getting as null. Could anybody please let me know about this if i need to add any more changes.
Below is the complete code of my sample application
web.xml
<web-app>
<servlet>
<servlet-name>myServlet</servlet-name>
<servlet-class>com.mypackage.MyServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>myServlet</servlet-name>
<url-pattern>/*</url-pattern>
</servlet-mapping>
<listener>
<listener-class>
com.mypackage.MyContextListener
</listener-class>
</listener>
<context-param>
<param-name>testMe</param-name>
<param-value>TestedSuccessfully</param-value>
</context-param>
</web-app>
ContextListener
package com.mypackage;
import javax.servlet.ServletContext;
import javax.servlet.ServletContextEvent;
import javax.servlet.ServletContextListener;
public class MyContextListener implements ServletContextListener{
public void contextDestroyed(ServletContextEvent arg0) {
public void contextInitialized(ServletContextEvent arg0) {
ServletContext context = arg0.getServletContext();
String testApplication = context.getInitParameter("testMe");
context.setAttribute("myTest", "mkmmkmmkm");
Servlet
package com.mypackage;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.ServletContext;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class MyServlet extends HttpServlet{
public void doGet(HttpServletRequest request, HttpServletResponse response){
ServletContext context = getServletContext();
if(context != null){
response.setContentType("text/html");
try {
String output = (String) getServletContext().getAttribute("testMe");
PrintWriter out = response.getWriter();
out.print("The required value is... "+output);
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
OUTPUT
When accessed with any url as below:
http://localhost:8080/helloworld/u
gettting output as "The required value is... null" . Because i set the context attribute, I am expecting not null. Can anybody suggest me on this.

context.setAttribute("myTest", "mkmmkmmkm");
String output = (String) getServletContext().getAttribute("testMe");You set "myTest" but try to get "testMe"

10g Report not running from Forms if called thru paramform on other domain

Hi...
I'm using Dev10g Rel.2....If I call a report with paramform=no and pass it a value from forms then report runs well. but if I call report thru parameter form and pass value from parameter form the report doesn't run with error:
The webpage cannot be displayed.
Interesting fact is that If I call the report from a client on same domain as that of Application Server then it runs even thru paramform. I've also entered the application server I.P and name on other domain's client but no way. Can u guess whats the problem there???

It sounds like a Firewall permissions issue to me. You might want to have your Firewall admin watch the firewall as you run your form to see if the packets are getting intercepted and blocked.
Hope this helps,
Craig
If a response is helpful or correct, please mark it accordingly.

How get runing total but opening balance pass from form through parameter

Sir I have tow table in accbal have opening balance and in voudetail have daily transaction I need ledger report with opening balance
My report get opening balance from accbal and get befor given date balance from voudetail
Such as
For opening balance
Selelect case when dr>cr then dr-cr
When cr>dr then cr-dr
End opbal from accbal
For get balance form daily transaction
Select case when sum(debit)-sum(credit)> sum(credit)-sum(debit) then
sum(debit)-sum(credit)
when sum(credit)-sum(debit)>sum(debit)-sum(credit) then
sum(credit)-sum(debit)
end trbalance from voudetail
where date <givendate
cal acute both balance in variable
total =opbal+trbal
and send this total in report as opening balance on top of report and add this amount asper condition in amount report amount is debit and totalbal is debit then
placeholdercolumn=totalbal+reportdebit
or credit then
placeholdercolumn=totalbal-reportdebit
sir I need this type of calculation in report
or
if you give me idea n query is best for me I calculate with over function and use report only for output
please sir give me idea urgent
thank
aamir

Meilan (guest) wrote:
: I wrote a Report called by a Form and pass a parameter from the
: Form to the Report, successfully! But I imported a Graphic in
: the Report, and the Graphic could not get the parameter...(the
: parameter in the Report and Graphic should both pass from the
: Form).
: I call the Report by " Run_Product( REPORTS, :V_PRTNAME,
: SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,NULL); " in the Form.
: and I imported the image from file for the Graphic in the
Report.
: Thanks for your help!
Meilan,
This forum is for Headstart related questions and experiences
only. Please go to metalink.oracle.com to get more information on
your problem.
Regards,
Ton
null

DB-link is not connected from Forms 10g

Hi,
I have created the db-link(visdev) from mytest schema to APPS schema -- created successfully
->Login to mytest schema and ran the query: select * from all_objects@dblink -- Return values.
-> I have used the same dblink with below code from Forms 10g (Datablock - Pre-insert trigger)
cursor_handle := dbms_sql.open_cursor;
dbms_sql.parse(cursor_handle, 'select decode(object_type,''TABLE'',''T'',''VIEW'',''V'',null) col1 from all_objects'||'@'||db-link, 1);
dbms_sql.define_column(cursor_handle,1,col1,30);
execute_feedback := dbms_sql.execute (cursor_handle);
execute_feedback := dbms_sql.fetch_rows(cursor_handle);
dbms_sql.column_value(cursor_handle,1,col1);
Its throws error in Pre-insert trigger : select decode(object_type,'TABLE','T','VIEW','V',null) col1 from all_objects@db-link ---- Not return values -- error out
I found this error using log message.
Can you please help us... its very critical for us.
Edited by: user775668 on Jun 17, 2011 5:46 AM
Edited by: user775668 on Jun 17, 2011 5:46 AM

In terms of trying to debug this why don't you login to your schema and create a view:
create view testview as select * from all_objects@dblink
and deal with that instead?
(You would need to grant permissions to that view.)
I mean as a way to keep the complex dbms_sql out of the loop and look
more to permissions and schema issues. In the long term the view hard codes the structure and is
not a good solution if the structure changes. I just mean as a test.
BTW you know there is an all_objects already? Didn't know if you meant that literally or not.
You could not use that name.

Report not working from forms.

Hi
we are beginners and please help us.we have installed in LAN database 11g on vista
and application server 10g on os 2003.
we are developing some applications from our developer pc in vista and using developer suite 10g.
we want to generate some reports and call them from forms.
This is the code in when button pressed.
DECLARE
repid REPORT_OBJECT;
repjobid VARCHAR2(200);
repstatus VARCHAR2(200);
repjobno number;
repserver VARCHAR2(100) := 'rep_mbxserver_FRHome1';
BEGIN
repserver := 'rep_mbxserver_FRHome1';
/* Check to see if forms application is WEB deployed */
IF get_application_property(user_interface) = 'WEB' THEN
message('web');
repid:= FIND_REPORT_OBJECT('REP');
message('report found');
/* Set Report parameters given WEB deployment */
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'e:\users\pro\reports\emp.rdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,repserver);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
/* DESFORMAT could be HTML, HTMLCSS or PDF here */
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'HTML');
/* Run the report */
repjobid := RUN_REPORT_OBJECT(repid);
message('run report');
/* Check the report status */
repstatus:=REPORT_OBJECT_STATUS(repjobid);
WHILE repstatus in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
repstatus := report_object_status(repjobid);
message('rep status');
END LOOP;
IF repstatus='FINISHED' THEN
message('REPORT WAS CORRECTLY RUN');
/* Display the report output in the client browser */
repjobno := length(repserver) + 1;
WEB.SHOW_DOCUMENT ('http://printer1.mbxnet.com:8889/reports/rwservlet/showjobs?server='||repserver,'_blank');
copy_report_object_output(repjobid,'\\ansu\mtb-erp\emp.lis');-- (Trying to copy to local folder)
message('File copied to local pc');
/* If report has failed display message to user */
ELSE
message('REPORT FAILED WITH STATUS: '||repstatus);
END IF;
message('222222222222');
ELSE
/* Else if forms application is Client-Server deployed */
/* Set Report parameters given Client-Server deployment */
message('client server');
repid:= FIND_REPORT_OBJECT('rep1');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,'e:\users\pro\reports\emp.rdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,'\\printer1\mtb-erp\emp.lis');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt.prt');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,repserver);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=NO');
/* Report to be executed via Reports Background Engine, not the 'new' Reports Multi-Tier Server */
/* Destype SCREEN or PREVIEW can be used here */
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,SCREEN);
/* Run the report */
repjobid := RUN_REPORT_OBJECT(repid);
copy_report_object_output(repjobid,'\\printer1\mtb-erp\emp.lis');
message('File ok');
-- host('c:\mtb-erp\ansu.lis');
END IF;
END;
we are struck and unable to proceed.Actually when we run the report from report builder it works.we are calling the report from application server.
Also if we replace the above web.show document with this statement it works but even though it gives FRM-41214 error.
web.show_document('http://ansuya.mtbnet.local:8889/reports/rwservlet?destype=cache&desformat=html&report=\\mbxserver\developers\emp.jsp&userid=scott/tiger@mbxsql&paramform=no');
One more doubt , is it possible if we don not want to show the report in a browser in case of client server locally in lan
but just generate the report from forms and save it in local folder like we do in previous old versions.If so please guide us.
Thanks in advance.

Hello ansu,
Did you solve this problem ?
Regards,
Felipe.

Reports are not called from form in browser plz help

Hi,
I have installed 9iAS+8.1.7 database on the same machine with NT4 server.My system's forms(.fmx) are running well but my reports are not running from my main form.i call reports from the
from as,
Run_Product(reports,'..\iReports\xglrxx12.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);
Actually want to know the report's setting when calling from the from in a browser(environment variables,virtual paths etc.).
My database is installed in drive E:\8idb_home\ and 9iAS is on
G:\9iAS_home\.My systems .fmx & .rep files are in "iforms" and "ireports" folder respectively.
Plz help!
Many thanks!

Hi,
First of all thanks to Vincent Botteman for solving the prob.
Yes when i changed my call of run_product by excluding the path i have specified when calling from form it then makes a result.
Also specified the entry of your reports .rep files by giving path in reports60_path registery variable as,
Run regedit-->Hkey_Local_Machine-->Software-->Oracle here give the full path of your .rep files as an first entry in reports60_path variable.And finally not mention the path when calling reports from form as,
Run_Product(reports,'xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Correct way.
Run_Product(reports,'..\iReports\xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Wrong way.
Regards!

Report(3.0) not executing from Forms 6.0.

Hello
I am trying to run a report (developed in Report designer 3.0) from a form (developed in Form Builder 6.0) as follows :
-- message ('Before Report...');
-- run_product (REPORTS, 'proj', SYNCHRONOUS, RUNTIME, FILESYSTEM, listid ) ;
-- message ('After Report...');
DECLARE
repid report_object ;
rep VARCHAR2(100);
BEGIN
message ('Before Report...');
repid := find_report_object('PROJ');
rep := RUN_REPORT_OBJECT(repid);
message ('After Report...');
END;
I have tried both of these methods (Run_Product and Run_Report_Object) but nothing works. What is the difference between Run_Product and Run_Report_Object for report processing point-of-view ? It is displaying both messages but giving no error. The Properties of PROJ node in 'REPORTS' class are as follows :
Name : PROJ
File-Name : <full-path>/proj.rdf
Execution Mode : RunTime
Communication Mode : Synchronous
Data Source Block : Null
Query Block : Null
Report Destination Type : Screen
Destination Name : Null
I am not able to see the results even by executing in form builder.
Any help will be appreciated.
Manish

Hi Shay
Thanks for your reply. I have compiled the report (repname.rdf) in Report Builder 6.0 and trying to execute it from a form, developed in Form Builder 6.0, as follows :
PROCEDURE run_report IS
list_id ParamList;
run_date date;
repid report_object ;
repout varchar2(100) ;
BEGIN
run_date := sysdate;
list_id := Create_Parameter_List('input_params');
Add_Parameter(list_id, 'DESTYPE', TEXT_PARAMETER, 'FILE');
Add_Parameter(list_id, 'DESNAME', TEXT_PARAMETER, '/home/mgupta/orep.ps');
-- Run_Product(REPORTS, 'Full-Path/repname.rdf', synchronous, runtime, filesystem, list_id);
repid := find_report_object('repname');
repout := run_report_object(repid);
Destroy_Parameter_List(list_id);
END;
I have tried both methods (Run_Product and Run_Report_Object) but nothing works. What is the difference between Run_Product and Run_Report_Object for report processing point-of-view? Note that I have given full path for Run_Product while report-name is given for Run_Report_Object. The full path is also given in the property palette report. It is displaying both messages but giving no error. The Properties of REPNAME node of 'REPORTS' class in Object Navigator of specified form are as follows :
Name : REPNAME
File-Name : <full-path>/repname.rdf
Execution Mode : RunTime
Communication Mode : Synchronous
Data Source Block : Null
Query Block : Null
Report Destination Type : Screen
Destination Name : Null
This report is running fine if I execute it in Report Builder but not running thru form.
Any help will be appreciated.
Manish

Values not passing from form to context attributes (value attributes)

Similar Messages

Maybe you are looking for