Field Value not passed from IDOC (orders01) to File Generated
Hi All,
I have added a custom field to a PO at item level (ekpo-Ztest)and Passing it to OUTBOUND IDOC.
In process of passing to IDOC(ORDERS01) i mapped the field to segment E2EDP19001-MFRPN and i see the value in the IDOC when i view it in WE02.
The problem is when i generate a file i don't see the value of E2EDP19001-MFRPN
We are already using QUALF,IDTNR,KTEXT of E2EDP19001 and i see all the values of these fields being passed from IDOC to file generated .
Let me know as i'm missing anything in here
I quick note ,
I see 3 version for E2EDP19 Segment for orders01
Vesrion
002 E2EDP19002 8 242 02/14/2005
001 E2EDP19001 40A 5 160 08/19/1997
000 E2EDP19 30A 3 108 04/03/1995
1)The version 000 and 001 are released but not 002 Version
2)May be i 'm using version 000 and its out put length is only 108 and these fields(QUALF,IDTNR,KTEXT) together occupy 108 and there is no room for my new field but My IDOC dispalys E2EDP19001 and E2EDP19002 and also it displays my new field but its the output file generated that doesn't show the value
Thanks
Resolved Myself
Thanks
Similar Messages
-
Values not passing from form to context attributes (value attributes)
Hi Experts,
I have bound the properties of theadobe interactive form (WD-Java) to the context attributes but the values are not passing to the value attributes at runtime.
For your information I have not bound the pdfsource binary attribute of the view to the custom controller pdfsource binary attribute.
Please advise.
Thanks,
ShobhitContext
GetData - ModelNode mapped to controller context (DataSource)
Attribute1 - Value Attribute (Form Field)
Is it allright to have the Data Source as a ModelNode (mapped to the controller context node) and then have Value Attributes under the ModelNode which are then bound to the adobe form input fields.
I know its frustrating to advise on such questions without looking at the code actually. But I would definitely need your support.
If possible could you mail me a project of yours where you have the form being PREFILLED with some values coming from a RFC FM and then the same form gets posted to SAP though another RFC FM.
Thanks,
[email protected]
OK. When I create a Fresh Adobe Interactive Form application, it works fine.
The problem Im facing is in the case, when Im using an existing PDF file created in the ABAP stack (TCode SFP). I am importing this PDF file into the WebDynpro Java Application and then binding the fields. So in this case the context binding does not work.
You guyz are right, I need to check if there is any other script which exists. But still what are views after this update?
Message was edited by:
Shobhit Swarup Mathur -
Values not passing from program to Layout
Hi Abaper's
My requirement is I need to set company logo in Invoice ( VF03 ) if a particualar condition satisifies, for this I have set a FLAG in my
driver program and called the FLAG in my Script Layout.
Here my issue is, for certain invoices the FLAG set in the program is being called in the Layout and Logo is displayed in invoice copy ( when excuted both in foreground and back ground).
But in certain invoices, if run in foreground none of the values ( means not only flag but also all the values to be passed to layout)
is displayed in invoice. It is only displaying the hard coded values in the layout ( showing blank page ).
and if I run in background all the values are passing to layout except all Global Variables (flags) in the program even though it
has value in the program.
Please advice what should be the problem, I have checked with my Functional and it seems to be fine in customization part.
Karthik
Edited by: Karthik R on Sep 21, 2010 2:42 PMHi Tamas,
I have tried it, but still not able to figure out the exact problem....since while running in background or foreground some of the all values including my logo are displayed in invoice but for some invoices none of the values from driver prgram is getting passed to layout while running in forground....but when run in background all values are passing except the FLAG set in the drvier program.
what should be the reason for this ? for some invoices all the values from driver is passing to layout but for some cases its not passing -
New field data not passed from BupaSearch to BupaCreate
Hi,
We have 2 new fields on BupaSearch. When we hit the create button to create a new BP, any data entered in the 2 new fields is not then passed through to the BupaCreate view. I've debugged in method 'CREATE_ACCOUNT' in BupaSearch, where it sets up parameters but the fields are not available to use at this point for some reason. So, for example, the following will fail:
lv_nickname = lv_query->get_property_as_string( 'NICKNAME' ).
Can anyone point me in the right direction ?
thanks,
Malcolm.Hi,
I need your help. Im trying to create a new field "identification type" in a view. This field is existing as a attribute of "BuilIdNumber" object. Im able to add this as context node. But when i include this field in view, and launch webclient, this field is disabled, Can you help me on this. I have used the wizard for creating a context node.
Can you plz tell all the steps in detail that are to be carried to add new field to a view.
Thanks in advance,
chandan -
VALUE NOT PASSING FROM 1 PAGE TO OTHER PAGE ?
Hi friends
I have bsp application with 3 htm pages.
I have a input value in first page like i_matnr.
If i give input material no its valu is coming in second page.
But its not coming in 3rd page.So what i have to do?
MoosaHi:
you should put like
in page attribute,
declare matnr
and in oninputprocessing or at where you have put your query.
matnr = request->get_form_field( 'matnr' ).
Regards
Shashi -
Data or Field value not found(ALE/IDoc)
Dear All,
I succesfully sent IDoc to the Destination client.In BD87(Destination) i found Data in IDoc type but it unable to update into database so what could be problem.
plz reply me soon,
RPThanks Dear,
Finally i got success.
thanks a lot -
Assignment field is not picking from GL
Dear All,
We are posting one real estate document with reference of the contract number. But when we see the FI document assignment field is not updating from GL which we maintained in sort key.
In that FI document we have 4 line items but one line has got updated assignment which we maintained in GL as a sort key.
Anyone have a idea please replay.
Regards,Hi,
It should pick the field value based on the sort key maintained.
What is the sort key maintained in the GL in which line item the assignment field is empty.
You can check your self as below:
Goto TCODE : OB16
Goto the Sort key for which the data is missing.
Select that and check the field maintained in that.
Check the data of that field in the BSEG/BKPF.
It should pick based on the data in that field.
OTHER POSSIBILITES:
Check the Substitution using the TCODE : GGB4 for the field BSEG-ZUONR
OR
any user exit.
VVR -
Unable to detect any parameter in html (webresource) when value is passed from onload method of form
I am trying out some stuff. For which I created a simple Entity. In the form of the entity I have added a simple web resource (html). And for the onload of the form I am calling the following function
function HelpDeskActivityOnLoadhandler()
var customParameters = encodeURIComponent("first=First Value&second=Second Value&third=Third Value");
Xrm.Utility.openWebResource("tsi_scriptzz",customParameters);
Here is the code for the tsi_scriptzz.html
<html>
<body>
<script type="text/javascript">
var vals = new Array();
if (location.search != "") {
vals = location.search.substr(1).split("&");
for (var i in vals) {
vals[i] = vals[i].replace(/\+/g, " ").split("=");
</script>
</body>
</html>
MY PROBLEM IS -> location.search is always coming back with empty string. So, it not getting the parametrs I am passing from the load method of the form.
Could someone kindly help me.
Thanks,
HasibHello, I tried it myself. I got a new_test.htm file and a new_test.js file. The loadWebResource function is called on the OnLoad event of an Entity.
function loadWebResource()
var params = encodeURIComponent('param1=value one¶m2=value two¶m3=value three');
Xrm.Utility.openWebResource('new_test.htm', params);
<html>
<head>
<title>Web Resource Parameter Example</title>
<!-- Use ../ClientGlobalContext.js.aspx if your webresource is in a deeper folder on CRM -->
<script src="ClientGlobalContext.js.aspx" type="text/javascript"></script>
<script type="text/javascript">
document.onreadystatechange = function () {
if (document.readyState == 'complete') {
var params = getParams();
for(var i=0; i<params.length; i++)
log(params[i].name + ' ' + params[i].value);
// this functions puts the params in a 'dictionary format'
// f.e params[0].name = param1 & params[0].value = 'value one'
// You could customize this function or find some on the internet to retrieve a param fe by name...
// This is just an example how to get the name and values
function getParams(){
var params = [];
var querystring = Xrm.Page.context.getQueryStringParameters().Data;
var querystringparts = querystring.split('&');
for(var i=0; i<querystringparts.length;i++)
var split = querystringparts[i].split('=');
params.push({
name: split[0],
value: split[1]
</script>
</head>
<body>
</body>
</html>
Hope it helps now. Kind Regards -
data:l_lotno like /JJVC/ERR851-master_lot_num,
l_batno like mchb-charg.
loop at i_inv_data into wa_inv_data.
l_batno = wa_inv_data-charg+0(1).
if l_batno ca SY-ABCDE.
translate l_batno to upper case.
l_lotno = wa_inv_data-charg.
perform f_idoc_851.
perform f_idoc_52 .
perform f_idoc850.
else.
if wa_inv_data-charg na SY-ABCDE
and wa_inv_data-werks eq c_us11.
l_lotno = wa_inv_data-charg+0(6).
perform f_idoc_851.
perform f_idoc_52 .
perform f_idoc850.
endif.
endif.
endloop.
data:l_lotno like /JJVC/ERR851-master_lot_num,
l_batno like mchb-charg.
IF p_werks EQ c_us11.
SELECT a~docnum "doc number
b~credat "creation date
b~status "status of idoc
b~statxt "last error message
FROM /jjvc/err851 AS a INNER JOIN edids AS b
ON adocnum = bdocnum
INTO TABLE i_idoc_error
WHERE a~master_lot_num eq l_lotno
AND werks EQ p_werks.
IF sy-subrc <> 0.
ENDIF.
the data in l_lotno and l_batno is not passing from the above if condition to the select statement can any one help me in this.You have to declare the l_lotno and l_batno as global variables.
here they are local variables and their scope is withing the block in which they are defined.
Declare them outside the blocks(Performs etc)
Regards,
Ravi -
Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)
Lync BToE - USB HeartBeat is not passed from Lync for long duration (more than 20 seconds)
Hi,
Did the issue happen only for you or for multiple users?
Make sure phone update to the latest firmware.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
I down loaded Elements 12, it is installed but do not open. Do not pass from sign in page. I have windows 8 OS.
Hi Jeff. Yes, I was prompted to enter my Adobe ID, after that the program did not continue. It only show a little circle spinning on the lower right. But after 5 minutes it still was spinning.
De: Jeff A Wright [email protected]
Enviado el: martes, 10 de diciembre de 2013 11:57 a. m.
Para: panamito
Asunto: Do not pass from sign in page
Re: Do not pass from sign in page
created by Jeff A Wright <http://forums.adobe.com/people/JeffAWright> in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/5917358#5917358 -
My iTune Match does not pass from step 1
My iTunes Match does not pass from step 1. Every time I start it I get an error msg (4010). Does anybody knows whats the problem?
There is a robust discussion about this here:
https://discussions.apple.com/message/18858414?ac_cid=tw123456#18858414 -
Passing field values to form from another form
Hi,
I have multiple detail table for a master table. The master table is project table and the details tables are all related to the project table. In the portal forms we cannot have a form based on multiple child tables. So I am trying to enter one detail table at a time. I have created a master-detail table based on project table and a detail table (cost table). After I enter data in this MD form I want to carry the projectid to another form based on another detail table (resource table) on the next page. I want to navigate to this next form by clicking on a next button after I have entered data on the previous MD form.
The projectid is a hidden field in the first MD form and is generated by a database sequence. I understood that there is many ways to send field values to a form:-
1. By creating a moduleid link on the next button. This link will have the projectid value
2. By calling the form from a PL/SQL procedure on the CALL/GO of the first MD form.
I am not sure how to get the 'projectid' value generated from the sequence and pass it to the link or a procedure. Will the projectid value be stored in the session ? How do I get it ?
Is the above way of entering multiple detail tables feasable ? Please advice.Hi,
I have multiple detail table for a master table. The master table is project table and the details tables are all related to the project table. In the portal forms we cannot have a form based on multiple child tables. So I am trying to enter one detail table at a time. I have created a master-detail table based on project table and a detail table (cost table). After I enter data in this MD form I want to carry the projectid to another form based on another detail table (resource table) on the next page. I want to navigate to this next form by clicking on a next button after I have entered data on the previous MD form.
The projectid is a hidden field in the first MD form and is generated by a database sequence. I understood that there is many ways to send field values to a form:-
1. By creating a moduleid link on the next button. This link will have the projectid value
2. By calling the form from a PL/SQL procedure on the CALL/GO of the first MD form.
I am not sure how to get the 'projectid' value generated from the sequence and pass it to the link or a procedure. Will the projectid value be stored in the session ? How do I get it ?
Is the above way of entering multiple detail tables feasable ? Please advice. -
Aggregate value of a transient field is not updated from cache
Hello together,
A view object has a transient field which display the count of records from a view accessor. In the EO for the view object ( of the view accessor) opearations on rows are perfomed from a different view object, this changes are not reflected in the transient field value.
I know is not very clear,here is sample:
Woker VO
-Worker EO
Worker2Department VO
-Worker2Department EO
Department VO
-Deparment EO
-workerCount: WorkersCounterViewAccesor.count("WorkerID")
WorkerCounter VO
-Worker EO
-Worker2Department EO
attribute binding: DepartmentID
If from Worker2Department records are deleted or inserted, the value of workerCount is not updated.
I've try to executeQuery on each view object,without success. I've notice that the WorkerCounter VO is having always the same records count after Worker2Department VO is updated.
If the method getDBTransaction().postChanges() is invoked, then the data is correctly fetched but then there are different other problems, and i would like to avoid using of postChanges().
My question is: why when rows are inserted/removes into/from a view object the changes are not visibile on different view objects declared for the same entiy object? Or how to make sure that the changes from an entity object are reflected in each view object that are using it?
Thank you a lot,
BogdanHi,
If you place the 0WBS_ELM_EX in the ODS ,either in the key field or in the data field , you can find it as a charecteristic in the report and you can drag it into the rows.
To reflet the changes that you made to the masterdata , you need to run the attribute change run every time you load the data .
regards,
haritha -
Screen-field value not visible
Hi All ,
I have added couple of fields to the standard transaction .Used a badi to achieve that.Now am able to send the values from one of the methods in the same badi to the custom field and a standard table is getting updated (which was created with append structure ).But am not able to see that value in the custom field after saving .
How come this is possible as the DB is getting updated .
Is there anything to be done in the module pool program or how ??
Regards ,
Hemanth Nugur .hi .Am using this badi to add custom fields in trading contract(WB22) .WB2_ADDITIONAL_DATA.
Everything is working fine except am not able to see the value passed onto the field .I am passing the value from the method CHANGE_BEFORE_UPDATE .
Thanks
Maybe you are looking for
-
Ipod touch 5 recognized by Itunes, but won't actually sync
Hi ~ I recently updated my itunes and ipod software. Now, my ipod touch 5 does not sync correctly. I go through all the motions of syncing my ipod, and itunes said it synced with my ipod, but I do not see the changes on my actual ipod. It is like the
-
What is the best database alternative?
I am collecting data (alarm & counter) from several serial devices which have memory and RTC. Therefore I have to take into account that the collected data will not be chronological and I may need to sum newly collected data to existing records and
-
Total number of lines of code in a class.
Dear Experts, Given a class, I want to find out the total number of lines of code in all of its methods. Following sub-parts are derived. 1. Find out all the methods of the class 2. Find out the number of lines for each of these methods and finall
-
I hope someone can help me as Adobe will not because they do not support version 5. They suggested I ask the forum. I am receving the following error message "an error has occured while writing the slide show to to WMV. The WMV file has not been cr
-
I download, click "Run" and it shows me a small progress window, asks me the question about admin privileges, then when I click OK, it just disappears and nothing happens. Running Windows 7