'VariableOrderUnit' is not a source

Hello
I have extracted the matmas lookup tables from the ERP-System. After that, I have mapped the key fields in the import manager. I think those are prerequisites to automatically import material master data.
However, the import of a file is not working:
Error:
The map could not be loaded because table 'VariableOrderUnit' is not a source.
Do I have to change the matmas05 xsd file?
Is there any other workaround?
Regards,
Go:khan

Hi Tanveer
Of course.
There are several import maps for "Regions", "Plants" etc. and I didn't use them before. The second mistake was that I didn't use the Client MDC R/3.
My scenario is ERP-XI-MDM (matmas) and those lookup table information import is a prerequisite.
Regards,
Go:khan

Similar Messages

Disk image Restore returns "Could not validate source - error 254"

I had backed up an older G4 with a disk image of the boot disk. I was having severe problems so I reformatted the boot drive and started a restore (using disk utility from startup disk). The restore started fine and ran a while but then "stalled." The "progress" bar stopped and the system just kept "hitting" the Utility DVD install disk non-stop (as shown by disk access light).
Now when I try again, I immediately get a "Restore Failure - Could not validate source - error 254"
The disk image being restored is on a hard drive. I copied it to another drive and tried again with the same result.
This is being done on an old G4 Tower, dual 1 GHz PPC under 10.5.8
Comments?
(This won't kill me as all my data files are also on my MBP, I just don't want to have to reinstall all my apps, setups, etc.)

Yes, for my "real" machine (my Intel MBP) I have images, clones, and Time Machine Backups not to mention my data files written to DVD. I've got at least triplicate backup. This was a old machine I was setting up for a specific purpose. I'm not losing any data but I just didn't want to have to reload apps and such. But guess I have no alternative. Thanks for the tip. I had never used the "scan for restore option" before so I learned something. Usually I just trust my multiple backup method so if one source is bad, no big deal. Thanks baltwo!

[ERROR] could not find source for resource bundle modules.

We are in the process of upgrading our flex application from SDK3.6 to SDK4.5.0.17899.
Flexmojos version used for compilation is 3.9.
The flex library project is complied with SDK4.5.0 version but BUILD is not getting SUCESS from maven.
The following is the reason is showing and unable to find out the root cause.
[ERROR] could not find source for resource bundle modules.
Can you please help me out.
Thanks,

Copying
/Software/FB\ Eclipse\ Plugin/Adobe\ Flex\ Builder\ 3\ Plug-in/sdks/2.0.1/frameworks/locale/en_US/charts_rb.swc into
the 3.5 SDK directory
/usr/local/lib/flex_sdk/3.5.0/frameworks/locale/en_US
solves the problem.
Not sure why as the charts_rb.swc comes from Flex 2.0

Error: could not find source for resource bundle charts

I am trying to upgrade from Flex SDk 3.4 to 3.5.
I have copied the Data Visualisation SWCs under libs, locale and rlsls folders as suggested by adobe.
I get the following error when building the application
flex-library:
     [java] Loading configuration file /usr/local/lib/flex_sdk/3.5.0/frameworks/flex-config.xml
     [java] Error: could not find source for resource bundle charts.
     [java]
What am I missing? Any help is highly appreciated.
Thanks

Copying
/Software/FB\ Eclipse\ Plugin/Adobe\ Flex\ Builder\ 3\ Plug-in/sdks/2.0.1/frameworks/locale/en_US/charts_rb.swc into
the 3.5 SDK directory
/usr/local/lib/flex_sdk/3.5.0/frameworks/locale/en_US
solves the problem.
Not sure why as the charts_rb.swc comes from Flex 2.0

Whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help

Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC.

"Project is not under source control" Prompt.

Hello,
When I create a simple dictionary type, I get a prompt "Project is not under source control", with following message:
Could not check package name. Do you want to continue ?
Yes/NO
This started happening today as I started working on a new DC.
I am not using NWDI. My workspace contains about 10 projects, all are closed except the one I am working.
Is it ok if I ignore this message ?
Thanks
Srinivas

Hi,
You can safely answer "Yes". This message means that the wizard could not ascertain whether the namespace for your package has already been reserved or not.
Regards,
Satyajit

My iPhone 4 has lost SIM connection several times over the past week when the phone is left on continually. I have had the SIM checked and it was not the source of the problem. I have found that I can reactivate the SIM by switching the phone off and on.

My iPhone 4 has lost SIM connection several times over the past week when the phone is left on continually. I have had the SIM checked and it was not the source of the problem. I have found that I can reactivate the SIM by switching the phone off and on again. Has anyone else experienced this problem and if so, is there an easy fix. I have been advised by Apple that the latest IOS update may overcome this situation but I'm only on slow download speeds and 690 Mb would take forever. I would appreciate any advice.
Best regards,
Rob.

PinguXeF wrote:
, while I have taken a backup of the iTunes Library,
this means nothing if it was not done correctly...
To have EVERYTHING on a New Computer...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751

Source of supply () not in source list (27423/0010) despite source list req

Hello,
We have soon upgrading APO in 7.0 version.
We have a SAP R/3 in 4.7 version.
APO created Purchase Requirements in SAP R3 with two kind of processes :
- Heuristics
- Deployment
In SAP R3 we have several database to maintain in order to affect correctly these Purchase Requirements to the good plant and the good scheduling agreement :
- info record
- scheduling agreement
- source list in wich we attached the number of the scheduling agreement
When we manage the heuristic, there is no problem .The Purchase Requirements are send via the C5 transaction.
When we manage the deplyment, we have the message "Source of supply () not in source list (27423/0010) despite source list req" - The purchase requirements of the deployment are sent directly to SAP R3.
I tried to compare the database of a OK item and a NOK item but I can'tfound something different.
Have you ever had this kind of problem ?
Thanks in advance for your help.

Hi Jingco,
I guess you have the PIR( Pur.Info record maintained ) in R/3 and CIFed to generate the Ext. Procurement relationship.
Please check that the Source of Suppy in Source list (ME01) is same as maintained in PIR.
revert back if still it doesn't help.
Regards
Kumar

Source of supply not in source list despite source list req.

I'm getting a log message "Source of supply (5300001019) not in source list (WCA0027/1001) despite source list req." when we run the SNP production planning (cdpsb0).
we are using APO and created an external procurement relationship based on the source list in ECC. i tested with 2 setups: with check and without check on the material master - purchasing (source list). I'm getting the same error.
whatelse should i check?

Hi Jingco,
I guess you have the PIR( Pur.Info record maintained ) in R/3 and CIFed to generate the Ext. Procurement relationship.
Please check that the Source of Suppy in Source list (ME01) is same as maintained in PIR.
revert back if still it doesn't help.
Regards
Kumar

IPOD Nano not in source list

OK... I've read several threads, and there doesn't seem to an answer out there...
The other night while updating my Nano (the second day I had it) it disappeared from the source list and hasn't reappeared. About half of my MP3s updated to it before it died. Now it just says "Do not disconnect" for days at a time. I can see the device in Windows XP explorer as an unnamed mass drive, but iTunes won't list the device as a source and I can't see any of the options for it. I've done all of the "R's" as far as resetting... even reinstalled iTunes from the web to ensure I had the latest version.
Any help out there?
Nano Windows XP

This worked for me after downloading that confounded 3_23 update:
1. Go to Start > Run
2. Type "diskmgmt.msc" (without quotes). If it tells you it can't find that program, try it without the ".msc"
3. That opens the Disk Management program.
4. You should see your Ipod listed as one of the "volumes." It may not be identified as an Ipod; might just say "removable storage device" or something like that. You can tell it's your Ipod by the gig space shown. If it's a 4 gig Ipod, you should see something like 3.7 gig shown (less if you've filled it with music already).
5. Right-click on that device and choose "Format..."
6. Choose the "FAT32" option and click "OK" or whatever it displays to start formatting (I forget, and I'm not testing it again now!)
7. You will lose any music files on the Ipod, but when it's done, your PC and Itunes should recognize the Ipod, and it should then work normally.
Be careful in that Disk Management program. You could wipe your hard drive if you choose drives incorrectly.

Why logical column in terms of other logical columns and not physical sourc

Hello
Can someone shed some light that in what scenario ..defining a logical column in terms of other logical column is beneficial compared to defining logical column in terms of physical sources?
I found something on google that said defining in terms of logical columns is like one time thing. I dont understand, even if you define in terms of physical source that' too one time.
In both the case we build an expression specifying which logical or physical columns.
Thank you

well logical columns from physical source, if in logical fact table you can set aggr rules. Logical columns based on other logical columns you can not. Logical columns based on other logical columns will inherit the aggr rules. So for instance, if you create col1 and col2. Both based off physical and both having sum aggr rule. If you create logical column col3 based off these two as such "col1"/"col2" it will produce the following sum(col1)/cum(col2). Now if you really wanted sum(col1/col2) then you should have made col3 based off physical as col1/col2 with aggr rule of sum.
Also of some note, all logical columns based off physical will be performed in the inner most query. So for my example above to get col3 where it is logical col1/logical col2 or sum(col1)/sum(col2) the physical query will be:
select D1.c1/D1.c2
from (
select sum(col1) as c1,
sum(col2) as c2
from tableA
) D1
So my short summary of this, is what or how do you want your sql to be created. Based on this can you lead you to your answer of whether to use logical col based on physical or other logical columns. And unltimately, check the sql generated from your work to ensure the sql queries generated are what you want and expect.
I hope this helps!

Can not set source file for Fireworks png in Dreamweaver

I recently purchased Adobe Design Premium CS5 to replace my CS3, but I have a big
problem. When I export a png in Fireworks to Dreamweaver it does not set the source
file correctly. It places the Fireworks object on the page, but when I select the table
that holds the Fireworks object, the path for the source on the Properties panel is
wrong - it says menu2.png. The correct document relative path is dress_images/menu2/menu2.png.
When I drag the Point to File icon over the menu2.png on the Files panel, it correctly displays
the full path, but when I let go of it, it sets the path back to menu2.png. I can not even type it
in the source box and get it to stay.
Here is the problem. When I click on the Edit button, it says it can't find the png. It is using
the full path from the C: drive instead of the document relative path. If I browse to the png file
and open it in Dreamweaver then click the Done button, it saves the png file but does not change
any of the content on the HTML page.
Fireworks and Dreamweaver CS3 worked perfectly here. Help!
I just tried to do this on another computer. This time when I pasted the Fireworks HTML onto the
page in Dreamweaver it set the path correctly (it was a root relative path instead of a document
relative path). I tried to edit in Fireworks using the Edit button, and it opened Fireworks without
any problem. I made some changes then clicked the Done button. Now the Done button is suppose
to be like magic. It is suppose to save the changes to the png file, make the changes on the HTML
page in Dreamweaver, and change any of the supporting files (images) that have been edited. It
always worked this way in CS3, and anything less than this would be a huge step backwards. In this
case, it saved the changes to the png, but did not make any other changes. The web page in
Dreamweaver is still the same. How do I get the Done button to work its magic using CS5.
Another problem - when I paste the code onto the page, the page looks totally messed up. If I save it
and reopen it then it looks fine. However, this never occurred with CS3. Aren't updates to software
suppose to be improvements?
Thanks.
Nathan

Yes, the web site is correctly defined in Dreamweaver. I teach web design for both high school and
adult school, and I have done this procedure 100's of times with CS3. There is something different with
CS5. I took your suggestion and imported the Fireworks HTML using Insert -> Image -> Fireworks HTML,
but it still does not work. I can edit it in Fireworks, hit the Done button, and the png file is saved but
the HTML page remains the same.
Also, the export does not get the path right, and it will not let me set the path right. The only way the path
is right is if the page that I am pasting the Fireworks HTML is in the same folder as the png. It always
sets the png's path as menu.png. Therefore, if the page is in a different folder, the document relative path
won't find it. This was never a problem with CS3. In fact, you could paste the code using Control-V and it
would work 100% of the time. That is how we always did it. When exporting from Fireworks, I would set
Export to "copy to clipboard" then move to Dreamweaver, click where I wanted the code pasted and do Control-V and presto it would
always work. You could come back a month later, select the table, click the Edit button, make changes
in Fireworks, click the Done button and the changes would be reflected on the HTML page in Dreamweaver without
doing anything more. I have tried it with "copy to clipboard" and I have tried it with "export HTML file". Neither
works. There is definitely something different between CS3 and CS5, and right now I am missing CS3.
Thanks for your help. I will keep fighting this until I get it, but any additional input would be appreciated.
Nathan

Xcode not saving source files

Hi
Has anyone else come across an issue where Xcode doesn't save source files before a build - despite setting the For Unsaved Files preference correctly?
My Java students are using Xcode 3.1.1 to create and build Java Tool projects. We've noticed that we can't modify the default source file for a newly created project, nor can we modify any new source files we add to the project UNLESS we close down and restart Xcode after adding each new file. Specifically, any edits are stored in the file buffers but these are not automatically saved to the hard disc when we trigger a build. However, once Xcode is closed and restarted, all source files in the project behave normally.
Interestingly, the problem doesn't seem to happen with Tool type projects in other languages, however, these projects by default put the source files in the top level of the project folder, whereas all Java projects put the source files one level down in a "src" sub-folder.
Has anyone else noticed these issues with Java projects? Do similar problems occur in other languages if source files are stored in sub-folders? Remember, the problem only exists for newly created files and it's resolved once Xcode is shut down and restarted - unless, of course, we need to add more files.
Anyone got any workarounds which avoid stopping and restarting Xcode?
Bob
PS: Please don't post comments saying that I should use Eclipse, Netbeans, BlueJ, etc That's not relevant to this discussion.

Thanks briyu. At least you've confirmed that I'm not going mad
As for 3.1.0, that's what the student machines are using and we have the problem there. I wonder why no one else has reported this before? Probably Xcode isn't used very much for Java.
Bob

Jdb in java 1.3.1 not listing source file...

Hi,
I'm trying to use the remote debugging option Xdebug for my server. If I attach using jdb -attach, I'm not able to list my source file using list command. It says Source file not found. I tried various means, -Denv.class.path, etc. nothing works. the use command is always showing "." I'm able to attach put breakpoints, stop the server code etc. please help.

it finally worked if I start the jdb from the ROOT dir. Then it takes the class path for the sources. But still, changing the "sourcepath" inside jdb is of no help.

Adobe Acrobat X - Saved Background Settings does not retain Source File

Hello,
I am using Adobe Acrobat X on windows 7.
I have a pdf file that I use as a background source file. When I select the Settings profile from the Saved Settings drop down it does not load in the Source File. It still has "From Color" selected and <No Source File Selected> is in the path location.
No matter how many times I add the file and click the save settings button it will not retain it
I've already tried both a 'repair' and 'reinstall' of the software.
Any ideas as to why this might be happening?

Hi Adam Baranek,
I am looking into this issue and will get back to you soon.
Regards,
Rahul Tyagi

'VariableOrderUnit' is not a source

Similar Messages

Maybe you are looking for