Variant-layout problem

I ve an option on 1st screen to choose the variant for layout.
my 1st display with any selected layout is executing fine and displaying the list.
from this screen, if i come back and change the variant and execute... then its not displaying accordingly.
i am doing this by OO ABAP.
Any help plz

check this, i guess this might help u.......
*Variables for variant
data:
wk_variant          like disvariant,
wx_variant          like disvariant,
wk_variant_save(1) type c,
wk_repid            like sy-repid,
wk_exit(1)          type c.
selection-screen begin of block b3 with frame title text-027.
parameters:p_vari like disvariant-variant.    "Variant
selection-screen end of block b3.
initialization.
perform f_init_variant.
perform f_variant_default using p_vari.
*This event is used for Layout Variant
at selection-screen on value-request for p_vari.
perform f_variant_f4 using p_vari.
form f_init_variant.
clear: wk_variant.
wk_repid              = sy-repid.
wk_variant-report     = wk_repid.
wk_variant-username   = sy-uname.
wk_variant_save       = 'A'. "All types
endform.                    "F_INIT_VARIANT
form f_variant_default using p_variant type disvariant-variant.
wx_variant = wk_variant.
if ( not p_variant is initial ).
    wx_variant-variant = p_variant.
endif.
call function 'LVC_VARIANT_DEFAULT_GET'
    exporting
      i_save        = wk_variant_save
    changing
      cs_variant    = wx_variant
    exceptions
      wrong_input   = 1
      not_found     = 2
      program_error = 3
      others        = 4.
case sy-subrc.
    when 0.
      p_variant = wx_variant-variant.
    when 2.
      clear: p_variant.
endcase.
endform.                    "f_variant_default
form f_variant_f4 using p_variant type disvariant-variant.
call function 'LVC_VARIANT_F4'
    exporting
      is_variant    = wk_variant
      i_save        = wk_variant_save
    importing
      e_exit        = wk_exit
      es_variant    = wx_variant
    exceptions
      not_found     = 1
      program_error = 2
      others        = 3.
if sy-subrc <> 0.
    message i122(zpp).
endif.
if wk_exit is initial.
    wk_variant-variant = wx_variant-variant.
    p_variant         = wx_variant-variant.
endif.
endform.                    "F_VARIANT_F4
pass wk_variant to alv FM
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_callback_program = sy-repid
      i_background_id    = 'ALV_BACKGROUND'
      it_fieldcat        = fieldcat[]
      is_layout          = wk_layout
      it_events          = v_events[]
      i_default          = 'X'
      i_save             = 'A'
      is_variant         = wk_variant
    tables
      t_outtab           = it_final_list.

Similar Messages

Div layout problem

Hi - stuck on what I think should be a fairly basic layout problem:
I have 2 divs, equal widths but varying heights, one floated to the left and one to the right so that they appear next to eachother on the page. The one on the left contains varying amounts of text, the one on the right contains a flash player so never varies.
Where the text for the left div is long, I want it to start off next to the player, but then flow beneath it rather than continuing downwards at the same width as the div. If I remove the width of the left div, so that it reverts to the container width, the player div positions itself below it, so I can't work out how to get the effect.
Can anyone help?

Hi,
hope I understood in the right way: I used (translated from German DW) "modify table" and so I got one more row and two columns in your Main_Content. In one of the new columns I copied the image and beneath I took the text (you now can replace with image and text of your choice), like this:
If that's not a help for your question, please ask me again.
What concerns the width of the pictures, I would format them with PS or a similar program in the same wide.
Hans-G.

Report painter variants/ layouts

Dear sirs,
a colleague of mine needs your experience. Our customer needs us to create some Report Painter reports with the possibility to change the layout. Is this/ something like this possible?
An example would be to pick up the columns or to change number format: see numbers in units or tousands of units. Something like ALV variants/ layout?
Any customizing option or workaround would help, thanks Otto

My users are very lazy and want me to do the columns changes automatically. An example: the supervisors work with much money and the want to see the numbers in tousands only. The basic users need to see the whole numbers. This is the simplified problem. And I don´t want to copy each RP report 5-10 times. And yes, I am an ABAPer, and if it would not be so time demanding requirement I would program the ALV reports instead of these RP.
New idea: could you extract the RP report code out of the generated report to reuse it in the standard ALV report?
Thank you for your effort, Otto

CSS Layout Problem?

Can someone please help me with a layout problem.
As far as I can tell the page looks as it should in Netscape,
Firefox, etc., but IE6 and 7 refuse to work correctly.
The page I am working on is:
http://www.vmtampademo.com/localangler/testpage.html
Most of the picture caption and headline of the middle column
is behind the picture. I attempted to force the info with a
seperating div which seems to work sometimes. I doubt that this is
the correct solution. What am I doing wrong?
Thank you for the help!

It looks fine in Firefox 2.0.0.1, Opera 9.10, and IE 7.

Layout problem in PDF conversion

Hi all,
i am downloading spool data using the function module CONVERT_ABAPSPOOLJOB_2_PDF. But i am facing layout problem. e.g. RFBILA00(financial statement generation program) has written balancesheet data to the spool. This spool data has some 6 columns. but CONVERT_ABAPSPOOLJOB_2_PDF is writing only first 3 columns to the generated PDF file. i used 'GET_PRINT_PARAMETERS' function module also with values like layout as 'X_65_132' and 'X_90_120'. but no success. if anybody knows the answer, please let me know.
Thanks in advance,
Naveen

Hi All,
i am following the below approach to download the information from spool.
program/spool output is an ALV List output data having 8 columns. but below approach is converting only first 5 columns in to PDF format. other 3 columns are getting truncated.
FUNCTION /ngl/download_spoolinfo_as_pdf.
""Local Interface:
*" IMPORTING
*"     REFERENCE(I_SPOOL_REQUEST) LIKE TSP01-RQIDENT
*"     REFERENCE(I_FILENAME) LIKE RLGRAP-FILENAME
*" EXCEPTIONS
*"      DOWNLOAD_ERROR
TABLES tsp01.
DATA: mtab_pdf LIKE tline OCCURS 0 WITH HEADER LINE,
        mc_filename LIKE rlgrap-filename.
DATA: mstr_print_parms LIKE pri_params,
        mc_valid(1) TYPE c,
        mi_bytecount TYPE i.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      copies                 = '1'
      cover_page             = space
      destination            = 'locl'
      expiration             = '1'
      immediately            = space
      mode                   = space
      new_list_id            = 'X'
      no_dialog              = 'X'
      user                   = sy-uname
      line_size              = 200
      line_count             = 65
     layout                 = 'X_65_200'
      layout                 = 'X_90_120'
      sap_cover_page         = 'X'
    IMPORTING
      out_parameters         = mstr_print_parms
      valid                  = mc_valid
    EXCEPTIONS
      archive_info_not_found = 1
      invalid_print_params   = 2
      invalid_archive_params = 3
      OTHERS                 = 4.
IF sy-subrc EQ 0.
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
      EXPORTING
        src_spoolid              = i_spool_request
        no_dialog                = 'X'
        dst_device               = mstr_print_parms-pdest
      IMPORTING
        pdf_bytecount            = mi_bytecount
      TABLES
        pdf                      = mtab_pdf
      EXCEPTIONS
        err_no_abap_spooljob     = 1
        err_no_spooljob          = 2
        err_no_permission        = 3
        err_conv_not_possible    = 4
        err_bad_destdevice       = 5
        user_cancelled           = 6
        err_spoolerror           = 7
        err_temseerror           = 8
        err_btcjob_open_failed   = 9
        err_btcjob_submit_failed = 10
        err_btcjob_close_failed = 11
        OTHERS                   = 12.
    IF sy-subrc EQ 0.
      mc_filename = i_filename.
      DATA: lv_filename TYPE string.
      lv_filename = i_filename.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          bin_filesize = mi_bytecount
          filename     = lv_filename
          filetype     = 'BIN'
        TABLES
          data_tab     = mtab_pdf
        EXCEPTIONS
          OTHERS       = 22.
      IF sy-subrc EQ 0.
        WRITE:/ mc_filename, 'CONVERTED TO PDF AND DOWNLOADED'.
      ELSE.
        WRITE:/ 'PROBLEM WITH DOWNLOAD'.
        RAISE download_error.
      ENDIF.
    ELSE.
      WRITE:/ 'PROBLEM WITH PDF CONVERSION'.
      RAISE download_error.
    ENDIF.
ELSE.
    WRITE:/ 'PROBLEM GETTING PRINT PARAMETERS'.
    RAISE download_error.
ENDIF.
ENDFUNCTION.

Layout problem - multiple repeating frames

Hi, I have a layout problem, pls help!
Short report description:
- Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
- - Frame2 - contains all frames beneath - variable vertical elasticity
- - - Frame3 - variable vertical elasticity
- - - - some boilerplates
- - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
- - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
- - - - .. other repeating frames ..
When reaching the bottom of a page, and there is not enough room to print a record for Repeating frame 2, a record from Repeating frame 3 is printed in the bottom.
Next page starts with the remaining records from Repeating frame 2.. and then the remaining records from Repeating frame 3.
For example:
Page 1:
Rep frame 2 - Record 1
Rep frame 2 - Record 2
Rep frame 2 - Record 3
Rep frame 3 - Record 1 -- not enough space to print Record 4, so this record is printed
Page 2:
Rep frame 2 - Record 4
Rep frame 2 - Record 5
Rep frame 3 - Record 2
How can i ensure that all records from Rep frame 2 is printed before records from Rep frame 3?

Hi, thanks for helping me out!
I tried to use anchors, but they had no effect when connecting top of 3 to bottom of 2, got the same layout.
I then tried to create frames with vertical elasticity expand around both rep frame 2 and rep frame 3, and it seems to do the job.
- Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
- - Frame2 - contains all frames beneath - variable vertical elasticity
- - - Frame3 - variable vertical elasticity
- - - - some boilerplates
- - - - Frame 4 - vertical elasticity expand
- - - - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
- - - - Frame 5 - vertical elasticity expand
- - - - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
and so on..
Thanks again

Layout Problem in swings

I have an Layout problem. My Applications consists of a label and a panel in which some more labels are present.
The panel should contain the scrollbar in order to view all the label that excced the size of the panel.This label and a panel should be adjacent to each other.
My problem is, I am not getting the scroll bar to the panel when I am adding the label that excced the size of the panel, when I am adding the label adjacent to this label.

Did you use JScrollPanel? If not, use it.

[solved] layout problem in amarok 2.02

Hi,
Here, I have a bad layout problem with amarok 2.02. Amarok does not fit on my screen which is 1400 pixels large! I cannot reduce the part where the collection is shown. So that it is really unpractical to use.
I uploaded a snapshot to illustrate the problem (it is the full screen!):
emmanuelfavrenicolin.free.fr/Public/Sna … ok202.jpeg
Someone have the same problem ?
I tried to install svn version but I stopped after 3 hours of compilation, it is quite a big application.
Last edited by manouchk (2009-05-23 06:28:43)

Well, I tried amarok2-devel 2.0.90-1 but the problem of graphic layout remains similar, no improvement. Is it normall? Maybe amarok is only available for computer with screen >= 1600x1200 or is there an hidden configuration file where I could tweek this?
Last edited by manouchk (2009-05-18 02:41:03)

Urgent: Layout problem in "light inner page"

Hi Experts,
I am facing a problem in portal content area on external facing portal. I see a vertical scroll bar which restricts application from being displayed on entire screen.
I am getting this problem after a patching of EP 7.0, before patching every thing was running fine.
To me it looks like a layout problem in "light inner page", When I use "Light - 1: column (Full width)" layout I get a vertical scroll bar on portal. When I use default layout then this vertical scroll bar disappears but I see an empty navigation bar on left side which is not required.
Can some one advise a solution for this.
-Lave

hi,
Similar problem in this thread. check it out
Desktop inner page lost
Regardss,
Ganesh N

How to make display variant layout as default ?

Hi All,
I have created display variant for VA05 layout as per user requirement.
Now whenever I execute VA05, I want that display variant layout should get defaulted. Currently SAP default one is executing and everytime I have to select manually my own display variant layout.
Please suggest.
Thanks.
Swarup.

Hi,
you can set your layout as default.
Goto VA05, enter necessary info. press enter. system will give list of sales order
Goto settings, select layout and choose administration.
click on default setting for your layout ( you get right symbol for your layout) and save it.
Regards,
Chandra

Design/Layout Problem in OOTB SP "Docs I'm following" page

Hello
The "Docs I'm following" My Sites page in SP 2013 has the following layout problem:
Long document titles overlap with other elements (see also screenshot).
Note: This is default SP, i.e. we have not deployed any custom branding.
I guess this is a problem which can easily be corrected even without having to wait for a SP update. Since I'm not very good with design changes I would be grateful if you could provide
us with a quick fix, e.g. an updated css file.
Thanks a lot.
Best regards
John

Hi ,
For your issue, you can add the following code into your MySite MasterPage:
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(document).ready(function () {
$(".ms-contentFollowing-itemTitle a").each(function(i){
$(this).text(shorten($(this).text(),32));
function shorten(text,maxLength) {
var ret = text;
if (ret.length > maxLength) {
ret = ret.substr(0,maxLength-3) + "...";
return ret;
</script>
Best Regards,
Eric
Eric Tao
TechNet Community Support

MM PO Layout problem

Hello MM gurus,
I seem to have a peculiar MM issue which I am not able to figure out. Whenever I display a Purchase Order using ME23N in the QA system, I am able to see field column such as Tracking Number in the Item overview (not Item details). When i try to view the same PO in the Production system, i do not see that column at all.
I have already
a) Checked the customizing settings " Define Screen Layout at doc level" between QA and production. No Anomalies there. (I have checked NBF and PTOF field groups)
b) checked if there are any variants present in the PO layout - Everything Standard. No Variants at all.
c) Checked if is it because of any personalised settings in the PO and again could not find anything interesting there.
d) Checked prior postings for a similar problem in Sapfans and couldn't find any.
So my fellow MM'ers, any help that you could offer would be greatly appreciated.
Regards,
Arvind

Hello,
I had already tried whatever you had suggested. I cannot see the "Administrator" button when i login to Production. This could probably be an access issue. But what baffles me most is that when i view the settings in production by looking at the entries in TCVIEW table, the check in the Invisible column for this field (BEDNR) is not there. which means it is visible. But when i display in the PO it is not visible. I tried to very carefully hover my mouse over these fields so that i can catch it and expand it. But to no vain.
Regards,
Arvind

Layout problem in grid

Hi,
I created an ALV Report with one basic list and two secondary lists. Functional owner created 3 layout varients one for each list so that he can see only selected fields in the output and he kept layout varient of basic list as default.when i execute the program i am getting basic list with out any problem where as when i am clicking in basic list to navigate to secondary list , secondary list is coming with top of page header but layout is not displaying by default, but when i am going to view menu + layout + choose and choosing the layout varient created by functional for that secondary list only it is coming and same problem for second secondary list.
I am getting data into all 3 final internal tables and even fieldcat for 3 list is also populating.
Please help me regarding this asap as we hae go live on 2nd of Jan.
waiting for replies at earliest.
Regards,
Subhani.

Hi
The layout variant is linked to the report, not to the list level.
So you should force the right variant when you call the ALV again for the secondary list.
U should try to fill the field HANDLE of the variant structure to indicate which variant can be used in certain level.
Max

Layout problem for Drill down ALV Report

Hello Everyone,
                       I have developed a ALV drill down report using the method G_GRID->SET_TABLE_FOR_FIRST_DISPLAY. The problem is what ever layout i save for the primary list 'Screen 100' is effecting my secondary list 'Screen 200'. User need to save both Screen 100 and Screen 200 layouts independently without affecting each other.
I am calling screen 100 as below,
Call metthod g_grid_100->set_table_for_first_display
Exporting
   i_Save                                     = 'A'
   is_layout                                 = ls_layout
   is_Variant                                =   ls_Variant
Changing
   it_outtab                                  = ct_poitems
   it_fieldcatalog                           = lt_fieldcat
Exceptions
   Invalid_parameter_combimation   = 1
   Program_error                            = 2
   too_many_lines                         = 3
   others                                       = 4.
Could any body suggest me a way to do this..
Thanks in advance.
Regards,
Shyam.

Hi,
Use multiple Layout structure (each alv have its own structure) .
Note the use of disvariant-log_group .
DATA: gs_disvariant_1 TYPE disvariant ,
           gs_disvariant_2 TYPE disvariant .
* Layout-Logical groups
CONSTANTS: gc_log_group_1 TYPE disvariant-log_group VALUE 'ALV1' ,
                        gc_log_group_2 TYPE disvariant-log_group VALUE 'ALV2' .
INITIALIZATION.
PERFORM at_initialization .
FORM at_initialization .
DATA: vari TYPE disvariant-variant .
PERFORM alv_variant_get_default USING gc_log_group_1 CHANGING gs_disvariant_1 vari .
PERFORM alv_variant_get_default USING gc_log_group_2 CHANGING gs_disvariant_2 vari .
ENDFORM.
FORM alv_variant_get_default
USING
    log_group TYPE disvariant-log_group
CHANGING
    disvariant TYPE disvariant
    variant    TYPE slis_vari .
DATA: ls_disvariant TYPE disvariant.
ls_disvariant-report = sy-repid .
ls_disvariant-log_group = log_group .
disvariant = ls_disvariant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = ls_disvariant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    disvariant = ls_disvariant.
    variant    = ls_disvariant-variant .
ENDIF.
ENDFORM.                    "alv_variant_get_default
Later....
   CALL METHOD gui_alv_grid_1->set_table_for_first_display
      EXPORTING
        is_layout       = wa_layout
        is_print        = wa_print
        i_save          = 'A'
        is_variant      = gs_disvariant_1
      CHANGING
        it_sort         = it_sort
        it_fieldcatalog = it_fieldcatalog
        it_outtab       = it_alv_grid_1.
CALL METHOD gui_alv_grid_2->set_table_for_first_display
      EXPORTING
        is_layout       = wa_layout
        is_print        = wa_print
        i_save          = 'A'
        is_variant      = gs_disvariant_2
      CHANGING
        it_sort         = it_sort
        it_fieldcatalog = it_fieldcatalog
        it_outtab       = it_alv_grid_2.
Regards.

Alv layout problem ?

Hi everyone,
I generating 2 alv reports within a program.In the selection screen there are 2 radio buttons for different alv reports. First i selected the 1st radio button and executed the prog to get a alv report.Then i went to change layout and selected the required columns from the columns set and then saved the layout as the default layout.
Then I came back to the selection screen again.In the selection screen, in the parameter p_var there is default variant,so i cleared the parameter with no layout variant selected.then i selected the 2nd radio button and executed the program.Here the program is again taking the default layout (even though i cleared it in the selection screen )and generating the alv report according to that.But i don't want to use the default layout when i select the 2nd radio button,unless i select it from the variant list.How can i do that?
Any suggestions please?

Hi Hymavathi,
Thanks for the reply.Below is my code for the layout.If u can see any problem in the code please tell me the changes.Thank you.
PARAMETERS: P_VAR LIKE DISVARIANT-VARIANT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VAR.
PERFORM GET_VARIANT CHANGING P_VAR.               " ALV Layout
FORM GET_VARIANT CHANGING X_VAR.
PERFORM F4_ALV_LAYOUT(PPIO_ENTRY) USING I_GRID-PROGRAM
                                 CHANGING X_VAR.
ENDFORM.
perform alv_display.
FORM ALV_DISPLAY.
DATA: I_GRID-LAYOUT TYPE SLIS_LAYOUT_ALV.
SORT I_HEADER BY PLNBEZ AUFNR.
Define layout.
CLEAR I_GRID-LAYOUT.
I_GRID-LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
Set up Variant
I_GRID-VARIANT-VARIANT = P_VAR.     " Variant
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM             = I_GRID-PROGRAM
    IS_LAYOUT                      = I_GRID-LAYOUT
    IT_FIELDCAT                    = I_GRID-FIELDCAT
    I_SAVE                         = 'A'
    IS_VARIANT                     = I_GRID-VARIANT
TABLES
     T_OUTTAB                      = I_HEADER
   EXCEPTIONS
    PROGRAM_ERROR                  = 1
    OTHERS                         = 2.
ALV Failed.
IF SY-SUBRC <> 0.
    WRITE: / 'Failed with',SY-SUBRC.
ENDIF.
ENDFORM.
PERFORM ALV_DISPLAY_2.
FORM ALV_DISPLAY_2.
DATA: I_GRID-LAYOUT TYPE SLIS_LAYOUT_ALV.
SORT I_HEADER BY PLNBEZ AUFNR.
Define layout.
CLEAR I_GRID-LAYOUT.
I_GRID-LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
Set up Variant
I_GRID-VARIANT-VARIANT = P_VAR.     " Variant
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM             = I_GRID-PROGRAM
    I_CALLBACK_PF_STATUS_SET       = I_GRID-PF_STATUS_SET
    I_CALLBACK_USER_COMMAND        = I_GRID-USER_COMMAND
    IS_LAYOUT                      = i_grid-layout
    IT_FIELDCAT                    = I_GRID-FIELDCAT
   I_SAVE                         = 'A'
   IS_VARIANT                     = I_GRID-VARIANT
   TABLES
     T_OUTTAB                      = I_HEADER
   EXCEPTIONS
    PROGRAM_ERROR                  = 1
    OTHERS                         = 2.
ALV Failed.
IF SY-SUBRC <> 0.
    WRITE: / 'Failed with',SY-SUBRC.
ENDIF.
ENDFORM.                    " ALV_DISPLAY_2

Variant-layout problem

Similar Messages

Maybe you are looking for