Various pricing procedures

hello SD Gurus, please provide various examples of pricing procedures which are normally used

hi
commonly used pricing procedures are Standard ,Customer specific and document specific
There are two simple reasons for making any Pricing Procedure in SAP  SD Modules.
1) Business Reason. What are the pricing aspects or strategies you want to apply for the client requirement in order to sell their
goods or render services, is all about the reason for various pricing procedures.
Eg: Domestic sales pricing procedure,
- Export Pricing Procedure,
- A rebate pricing procedure or
- A High Discount oriented pricing Procedures.
- A repair pricing procedures.
You have your own conditions intended to few transactions only. Put all this conditions as a set defining your own Procedures. It may even include special requirements and formulas applied for such Pricing Procedures.
2) A special pricing procedures, in order to facilitate added functionalities of SAP pricing architecture, we must define new
pricing procedure. SAP Standard programmes checks these special Indicators in-order to do some required functions.
As a example 1, you need to have a Pricing procedure for condition supplement inorder to use the condition supplements. The condition supplement pricing procedure must be given in the condition type definitions (v/06) of the Pricing Condition where you need to supplement, without which SAP SD Condtion Supplements functionality doesnt work.
As a example 2, you need to have a Pricing procedure for Inter Company Billing Conditions(IV01 & IV02) inorder to be active for Inter Company Billing specific transactions. Thus make sure that, the procedure wouldnot apply for non-Inter company transactions.
Eg: KA0000 for Condition Supplement for KA00
- PR0000 for Condition Supplement for PR00
- ICAA01 for Inter-Company Billing
Here I would like to remind about a important field in pricing.
In V/08 of defining a new Pricing Procedure, in main screen, you have a field called TSPP (Transaction Specific Pricing Procedure). This has to be ticked on for Intercompany Billings.
The SAP help reads for this field as Under:
Transaction-specific pricing procedure
Pricing procedure transaction-specific indicator
Before Release 4.0A, no special pricing procedures were used for intercompany billing and rebate credit memos, programs were just set accordingly to deal with these situations. As of Release 4.0A you are offered greater flexibility in the form of the option to define special pricing procedures for intercompany billing and rebate credit memos. For reasons of future compatability, you will still be able to use the old program specifications. For this reason, you must set this indicator if you want to create a special pricing procedure. This is to prevent the program settings being used.
This indicator is also used as of Release 4.0A to redetermine the condition class and the statistical condition indicator when copying from a reference document.
Example:
You copy prices from a shipment document to the billing document. The prices should lead to a surcharge in the billing document. This is guaranteed by the redetermination of the condition class in the pricing procedure.
Same case with Standard Pricing procedure or Inter Company Pricing Procedure.
to view different pricing procedure u can proceed through the t-code<b> V/08</b>
Message was edited by:
        SHESAGIRI GEDILA

Similar Messages

  • Difference among different pricing procedure

    Hi,
    I want to know that, what is the difference among different pricing procedure,Like
    Standard,return,sample,scrap and credit memo.
    Please reply soon.
    Regards
    prabudh

    Hell tiwari,
    <b>**Please Do reward if it helps**</b>
    sales org + dist chan + div + document pric proc + cust pric proc --- > Pric Proc.
    we determine the pric procedure. So, just have a different document pricing procedure for sales order document type and invoice document type. You can have a different pricing procedure with this change.
    There are two simple reasons for making any Pricing Procedure in SAP  SD Modules.
    1) Business Reason. What are the pricing aspects or strategies you want to apply for the client requirement in order to sell their
    goods or render services, is all about the reason for various pricing procedures.
    Eg: Domestic sales pricing procedure,
    - Export Pricing Procedure,
    - A rebate pricing procedure or
    - A High Discount oriented pricing Procedures.
    - A repair pricing procedures.
    You have your own conditions intended to few transactions only. Put all this conditions as a set defining your own Procedures. It may even include special requirements and formulas applied for such Pricing Procedures.
    2) A special pricing procedures, in order to facilitate added functionalities of SAP pricing architecture, we must define new
    pricing procedure. SAP Standard programmes checks these special Indicators in-order to do some required functions.
    As a example 1, you need to have a Pricing procedure for condition supplement inorder to use the condition supplements. The condition supplement pricing procedure must be given in the condition type definitions (v/06) of the Pricing Condition where you need to supplement, without which SAP SD Condtion Supplements functionality doesnt work.
    As a example 2, you need to have a Pricing procedure for Inter Company Billing Conditions(IV01 & IV02) inorder to be active for Inter Company Billing specific transactions. Thus make sure that, the procedure wouldnot apply for non-Inter company transactions.
    Eg: KA0000 for Condition Supplement for KA00
    - PR0000 for Condition Supplement for PR00
    - ICAA01 for Inter-Company Billing
    In V/08 of defining a new Pricing Procedure, in main screen, you have a field called TSPP (Transaction Specific Pricing Procedure). This has to be ticked on for Intercompany Billings.
    The SAP help reads for this field as Under: Transaction-specific pricing procedure
    Pricing procedure transaction-specific indicator
    Before Release 4.0A, no special pricing procedures were used for intercompany billing and rebate credit memos, programs were just set accordingly to deal with these situations. As of Release 4.0A you are offered greater flexibility in the form of the option to define special pricing procedures for intercompany billing and rebate credit memos. For reasons of future compatability, you will still be able to use the old program specifications. For this reason, you must set this indicator if you want to create a special pricing procedure. This is to prevent the program settings being used.
    This indicator is also used as of Release 4.0A to redetermine the condition class and the statistical condition indicator when copying from a reference document.
    Example:
    You copy prices from a shipment document to the billing document. The prices should lead to a surcharge in the billing document. This is guaranteed by the redetermination of the condition class in the pricing procedure.
    Same case with Standard Pricing procedure or Inter Company Pricing Procedure.
    Regards
    AK

  • How to display modified condition base value in Pricing Procedure?

    Hi everyone:
    I used a formula to change the condition base value (via the VOFM transaction) of various price conditions that are assigned to the same material. In this way, I can distribute the total quantity of the item line in smaller quantities for each price condition.
    Now the problem is that in the conditions tab of the sales order, I can not see the Condition Base Value of each Price Condition, and that's a little confusing.
    Did Anyone know's a way to show the modified Condition Base Value in the Pricing Procedure of the Condition Tab?
    Thanks a lot,
    Ginno Giuffra

    Thanks JJ:
    Yes,  I can found the modified base value in the condition details, but I still need to show it in the Pricing Procedure scheme.
    It is curious that the table options does not allow you to add that field to the escheme.
    Does anyone knows a user exit wich can modifye the table?
    Thanks again,
    Ginno Giuffra

  • Pricing procedure and CIN master

    Hi MM Gurus,
         I need one simple procedure for creating Pricing Procedure.........and ......creating Excise details and relating  and can anybody show how the pricing procedure and excise (CIN) is related .
    Regards,
    Girish.C.M

    Hi,
    CIN Setting:
    Check Calculation Procedure
    In this activity, you can check and, if necessary, change existing procedures for tax calculation.
    Standard settings
    Calculation procedures containing the necessary specifications for the calculation and posting of taxes on sales/purchases have already been defined in the standard SAP system for certain countries. Every calculation procedure groups several tax types together into a condition type (for example, output tax or input tax) in the calculation procedure, and determines calculation rules for it.
    The calculation procedure determines for which amount the individual condition types are to be calculated. This can be the base amount (total of the expense items and the revenue items) or a subtotal. The entry in column FrmLvl, determines for which amount tax is calculated.
    Note
    In this activity, the condition types for the check and the possible change provided in the standard system are also displayed. Here, for example, the condition calculation rule, or for which base amount the tax is calculated is determined (= condition type).
    Recommendation
    If possible, do not change the condition types and calculation procedures provided in the standard system. Only check the standard condition types and calculation procedures regarding whether you can use them for your requirements. If necessary, make changes.
    Activities
    If you cannot use the standard settings, change the condition types and calculation procedures delivered to meet your requirements.
    Procedure (pricing, output control, acct. det., costing,...)
    Specifies the conditions that are allowed for a document and defines the sequence in which they are used.
    Example
    Procedures are used, for example, in the following applications:
    · Pricing in sales and distribution
    · Applying overhead in Product Costing (costing sheets) and for CO internal orders
    · Calculating accrued costs in Profitability Analysis
    · Output control (printed confirmations, EDI messages, electronic mail)
    · Account determination
    · Calculating taxes on sales/purchases
    · Calculating accruals in Cost Center Accounting
    · Pricing for resource planning
    Definition: condition type
    Controlling (CO)
    A distinction, in overhead calculation, is made between:
    · Base condition types, which determine the object for which the overhead is to be calculated
    · Overhead condition types, which define the percentage overhead to be applied
    In resource planning, a condition type determines the types of resource prices that are stored in the SAP System. These can be absolute or percentage values, for example.
    Real Estate Management (RE)
    An exact definition of a condition that specifies the amount paid for a specific service.
    Condition types include:
    · Basic rent
    · Advance payment for operating costs
    · Pest control
    Sales and Distribution (SD)
    A characteristic of a condition.
    For example, in pricing, different condition types are used to distinguish between a discount that refers to a net price and a discount that refers to a gross price.
    Treasury (TR)
    A characteristic of a condition used to classify financial transactions.
    Typical examples of condition types are interest, dividends, or full repayment upon maturity. The various parameters specified for the individual condition types determine how the flows are calculated in the cash flow.
    Return ->
    Definition: condition_type
    Condition type
    The condition type is used for different functions. In pricing, for example, the condition type lets you differentiate between different kinds of discount; in output determination, between different output types such as order confirmation or delivery note; in batch determination, between different strategy types.
    Access sequence
    With the access sequence you define
    · the condition tables used to access the condition records
    · the sequence of the condition tables
    · which field contents are the criteria for reading the tables
    Assign Country to Calculation Procedure
    In this activity, you enter the key for the calculation procedure which determines the conditions which are allowed per document and which defines the sequence of the conditions in the document for each country.
    Requirements
    Each calculation procedure which you enter must contain the necessary specifications for calculating and posting the taxes on sales/purchases. For more information on this, read the chapter "Create calculation procedure".
    Activities
    1. Assign a procedure for tax calculation to every country with which your company has business dealings.
    2. Make sure that the corresponding data for calculating taxes is stored for each calculation procedure which you enter here.
    Check and Change Settings for Tax Processing
    In this activity you make the necessary specifications for posting taxes. In doing this you specify under a process key the following indicators:
    · Tax type
    Output tax, input tax, additional taxes, or "not tax-relevant" can be specified as the tax type.
    · Nondeductibility of tax amounts
    For this, tax amounts are marked as not deductible.
    · Posting indicator
    Here you specify whether the tax amount is posted separately or distributed to expense or revenue items.
    · Tax not relevant to cash discount (Not discount relevant)
    This indicator is set only for Canada. If you select it, the system does not take into account the corresponding tax amount when determining the tax base.
    Standard settings
    Process keys with the most important characteristics for tax amounts have already been set in the standard SAP system.
    Recommendation
    Do not change the standard settings. Check whether you can use these process keys for your company, making changes only if necessary.
    Activities
    If you cannot use the standard settings, use new process keys and enter them in your calculation procedure. Do not change the standard SAP process keys.
    Note
    You must make enhancements to the standard settings if you want to specify a new account key in the "Create calculation procedure" activity. You must create and maintain this key beforehand in the "Settings for tax processing" activity.
    Internal processing key
    The internal processing keys are used by the system to determine accounts or posting keys for line items which are created automatically.
    The processing keys are defined in the system and cannot be changed by the user.
    Definition: posting key
    Financial Accounting (FI)
    A two-digit numerical key that determines the way line items are posted.
    This key determines several factors including the:
    · Account type
    · Type of posting (debit or credit)
    · Layout of entry screens
    Return ->
    Definition: posting_key
    Maintain Excise Registrations
    Use
    In this IMG activity, you maintain the data relating to your excise registrations.
    Activities
    Enter each of your excise registrations, specifying a four-character code for each.
    Definition: excise registration
    Financial Accounting (FI)
    An entity in India that is entitled by law to produce any goods liable to excise.
    Each entity is assigned its own excise registration number.
    Every factory that manufactures excisable goods is required to register separately, so that a business with seven factories requires seven registrations.
    Return ->
    Definition: excise registration
    Maintain Company Code Settings
    Use
    In this IMG activity, you maintain the data relating to your company codes.
    Maintain Plant Settings
    Use
    In this IMG activity, you maintain excise information relating to your plants.
    Maintain Excise Groups
    Use
    In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
    Definition: excise group
    Financial Accounting (FI)
    A unit within an excise registration, in India, which keeps its own set of excise records.
    Whereas the excise registration reports to the excise authorities, the excise group is a purely internal organizational unit. Each excise group keeps records of all transactions that have to be reported to the excise authorities. When the time comes to present these records to the authorities, the excise registration compiles the information from all of its excise groups.
    Return ->
    Definition: excise group
    Maintain Series Groups
    Use
    In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
    Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    Activities
    · Define excise series groups based on type of outgoing document
    · Assign series group to excise registration ID
    · If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    · If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
    Example
    You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
    Maintain Excise Duty Indicators
    Use
    In this IMG activity, you maintain the excise duty indicators.
    Maintain Postal Addresses
    Use
    In this IMG activity, you maintain the addresses of various customs and excise organizations that your company deals with.
    You use these addresses in the ARE Documents functions. When you create an ARE-1 or ARE-3, you enter the address of the excise department and the customs department involved in the export process. The system then prints their names and addresses on the AREs.
    You can then define a default local excise department for each excise group and a default customs department for each series group.
    Definition: ARE-1 document
    Logistics - General (LO)
    A form, in India, that companies have to fill out when they remove excisable goods from their manufacturing plants for export.
    The form exempts them from paying excise duty when they remove the goods from their premises.
    Return ->
    Definition: ARE-1 document
    Definition: ARE-3 document
    Logistics - General (LO)
    A form, in India, that allows companies to sell otherwise excisable goods from their premises without paying basic excise duty. The buyer of the goods must be in possession of a deemed export license.
    The ARE-3 states what goods are being removed and which deemed excise license covers it.
    Return ->
    Definition: ARE-3 document
    Maintain Subtransaction Type with Text
    Sub Transaction Type
    Sub transaction type is used for multiple purposes
    Subcontracting:
    It determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
    Excise removals
    Sub transaction type is also used for determining the accounts while doing excise removals.
    With in CIN the account determination is based on the transaction type. So normally you can have a single set of accounts for Excise utilization. In case you need alternate account determination for handling various scenarios you can define sub transaction types. The sub transaction types and corresponding account assignments needs to be maintained in CIN customization
    Select Tax Calculation Procedure
    Use
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
    · If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    · If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
    Definition: condition-based excise determination
    Logistics - General (LO
    A method that the system uses of determining excise duty in India.
    This method requires you to create condition records for each combination of vendor or customer and material (and possibly other conditions).
    When you create a purchasing document, the system calls the tax procedure assigned to India. The tax procedure finds all of the condition records that you have created for that combination of vendor and material.
    When you create a sales document, the excise duties and sales taxes are determined by the pricing procedure (not the tax procedure).
    Return ->
    Definition: condition-based excise determination
    Definition: formula-based excise determination
    Logistics - General (LO)
    A method that the system uses of determining excise duty in India.
    This method was used in the Country Version India Add-On and requires you to maintain additional data in the Excise Rate Maintenance transaction, J1ID.
    When you create a purchasing document, the system calls the tax procedure assigned to India. Each of the excise duties in the tax procedure has its own condition types, and each condition type is assigned to a formula. This formula instructs the system to calculate the excise duty using the data that you have maintained in the Excise Rate Maintenance transaction.
    When you create a sales document, the system determines the excise duties and sales taxes using the pricing procedure (not the tax procedure).
    Return ->
    Definition: formula-based excise determination
    Maintain Excise Defaults
    Use
    In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    Activities
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    · Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    · Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    · Specify the conditions in the sales order that are used for excise rates.
    · Specify the countervailing duty condition type used for import purchase orders.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
    Definition: basic excise duty
    Financial Accounting (FI)
    The main type of excise duty in India.
    It is levied on a wide range of products, for example, foodstuffs, metals, jewellery, leather goods, and machinery.
    Return ->
    Definition: basic excise duty
    Definition: additional excise duty
    Financial Accounting (FI)
    A form of excise duty, in India, levied on a select range of products, for the most part, textiles.
    Return ->
    Definition: additional excise duty
    Definition: special excise duty
    Financial Accounting (FI)
    A form of excise duty in India on a limited number of goods, mostly luxury goods, including pan masala, sparkling waters, furs, and yachts.
    Return ->
    Definition: special excise duty
    Definition: cess
    Financial Accounting (FI)
    In India, a tax on the manufacture of certain products, mostly foodstuffs.
    Return ->
    Definition: cess
    Definition: countervailing duty
    Financial Accounting (FI)
    A form of excise duty imposed on imports that are subsidized by the country in which they were manufactured.
    Countervailing duty (also known as CVD) is intended to make the imports more expensive, thereby redressing any competitive advantage they might have over goods produced locally.
    Return ->
    Definition: countervailing duty
    Define Tax Code for Purchasing Documents
    Use
    In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
    Only carry out this activity if you use condition-based excise determination.
    Activities
    Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Deter
    Sales Tax Code
    The tax code represents a tax category which must be taken into consideration when making a tax return to the tax authorities.
    Tax codes are unique per country. The tax rate calculation rules and further features are stored in a table for each tax code.
    Procedure
    For tax-exempt or non-taxable transactions, you should use tax codes with a 0 percentage rate if the corresponding transactions are to be displayed in the tax returns.
    Note
    You must define new tax codes if tax rates are changed by the state. The old codes with the old tax rates must remain in the system until no more open items which use this tax code exist.
    Definition: tax code
    Financial Accounting (FI)
    A two-digit code that represents the specifications used for calculating and displaying tax.
    Examples of the specifications defined under the tax code are:
    · Tax rate
    · Type of tax (input tax or output tax)
    · Calculation method (percentage included or percentage separate)
    Return ->
    Definition: tax_code
    Definition: tax rate
    Financial Accounting (FI)
    The percentage rate used to calculate the tax amount.
    Return ->
    Definition: tax_rate
    Assign Tax Code to Company Codes
    Use
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination
    Classify Condition Types
    Use
    In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
    The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
    In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    · For taxes on purchases, use the condition types contained in the tax procedure.
    · For taxes on sales, use the condition types contained in the pricing procedures.
    Standard settings
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    Maintain Chapter IDs
    Use
    In this IMG activity, you maintain the chapter IDs and the corresponding descriptions as per the schedules published by the Central Board of Excise and Customs.
    Definition: chapter ID
    Logistics - General (LO)
    The number given to a material in the schedules of materials published by the government of India.
    The schedule lists all materials involved in manufacturing, input materials and output materials alike. It shows how much excise duty is levied on each material.
    Each material in the schedule is assigned its own identification code, called "chapter ID."
    Example
    The schedule contains an entry for ceramic roofing tiles, which are liable to basic excise duty at 16%. The chapter ID associated with these tiles is 6903.10.
    Return ->
    Definition: chapter ID
    Assign Users to Material Master Screen Sequence for Excise D
    Use
    In this IMG activity, you customize the material master data so that it shows the information relating to excise duty.
    Standard settings
    Country Version India comes with a screen sequence (IN) that shows the excise duty fields. You have to assign it to each of your users.
    Activities
    1. Double-click User Screen Reference.
    2. Assign all users who need to see the excise duty information to the screen reference IN.
    Example
    Name Screen Reference
    MISHRA IN
    Screen Sequence Number
    Alphanumeric key identifying the screen sequence. The screen sequence defines the sequence of information units in the material master dialog. A screen sequence is made up of data screens. For information on the screen sequences defined in the standard R/3 system, see the IMG documentation Configuring the Material Master.
    Note
    When creating a screen sequence, use an alphanumeric key beginning with the letter Y or Z (customer name range). This key cannot subsequently be changed.
    Dependencies
    You can assign screen sequences to users in the IMG activity Assign Screen Sequences to Users/Material Types/Transactions/Industry Sectors.
    Screen reference depending on the user
    Grouping of users that determines what screens are displayed in accordance with the user master record when you maintain material master records. It also determines the order in which the screens appear.
    Definition: user master record
    User and Authorization Management (BC-SEC-USR)
    Record that contains important master data for a user in the SAP System.
    The user master record contains the assignment of one or more roles to the user. This is how a user menu and the corresponding authorizations for the activities contained in the user menu are assigned to the user. Only users who have a user master record can log on to the system.
    Return ->
    Definition: user_master_record
    Define Form Types
    Use
    In this IMG activity, you define which form types you want to record in the system. You can only use form tracking for the form types that you enter here.
    Example
    · Form type: CT3
    · Form description: Concessional tax form
    · Status: Receive
    Define G/L Accounts for Taxes
    Use
    In this IMG activity, you specify which G/L accounts you will use to record which taxes.
    Requirements
    You have set up G/L accounts for each of the processing keys listed below.
    Activities
    Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
    · VS1 (basic excise duty)
    · VS2 (additional excise duty)
    · VS3 (special excise duty)
    · VS5 (sales tax setoff)
    · MWS (central sales tax)
    · MW3 (local sales tax)
    · ESA (service tax)
    · ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction
    Use
    In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
    If you use subtransaction types, enter the accounts for each subtransaction type as well.
    Activities
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
    The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example
    Excise TT DC ind Account name
    GRPO CR CENVAT clearing account
    GRPO CR RG 23 BED account
    GRPO DR CENVAT on hold account
    Specify G/L Accounts per Excise Transaction
    Use
    In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
    When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
    · Excise group
    · Company code
    · Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
    Requirements
    You have already:
    · Defined the G/L accounts
    · Defined the excise groups
    · Maintained the transaction accounts
    Activities
    For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
    Note
    You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
    Define Processing Modes Per Transaction
    Use
    In this IMG activity, you specify which processing modes the user can use in the various Incoming Excise Invoice transactions.
    This way, you can tailor the transaction to what your users have to do.
    Standard settings
    The system comes with three standard transactions relating to the Incoming Excise Invoices function (those that are included in the role SAP_CIN). The processing modes available in these transactions are as follows:
    · J1IEX_C
    This transaction is for excise clerks: users of this transaction can only capture and display excise invoices.
    · J1IEX_P
    This transaction is for excise supervisors: they can change, display, cancel, and post excise invoices.
    · J1IEX
    In this transaction, users can capture and post excise invoices, as well as displaying, changing, and canceling them.
    Activities
    If the standard settings meet your requirements, do not do anything.
    Otherwise, you can adjust the standard settings or you can create your own transactions. To do so:
    1. In Maintain Transaction, create a new transaction by making a copy of one of the standard transactions. Give the new transaction a transaction code of your choice.
    2. In this activity, enter data as follows:
    o Tcode: The transaction code that you have just created.
    o Proc. mode: Specify what the users of the transaction will do with the excise invoices.
    o Active: Select this indicator to activate the setting.
    Example
    You might want to create a transaction that only allows users to display excise invoices.
    Define Reference Documents Per Transaction
    Use
    In this IMG activity, you specify for each combination of transaction and processing mode which reference documents you want the users to be able to use.
    Activities
    If the standard settings meet your requirements, you do not have to do anything.
    Otherwise, add the entries that you need to the table: For each transaction, make one entry per combination of processing mode and reference document. Activate each entry for it to work.
    Definition: excise invoice reference document
    Logistics - General (LO)
    A document, in India, that you refer to when you enter an incoming excise invoice.
    If you have already posted the goods receipt, you can use the goods receipt document as the reference document. Otherwise, you can use the purchase order (or another purchasing document, such as a be a contract or a scheduling agreement).
    Example
    In the SAP System, you create a purchase order for 100 bags of sand and send the order to your vendor. Two weeks later, the vendor delivers the sand, accompanied by an excise invoice.
    When you enter the excise invoice in the system, you specify the number of the original purchase order: this is the reference document.
    Return ->
    Definition: excise invoice reference document
    Maintain Rejection Codes
    Use
    In this IMG activity, you define the rejection codes that are used in the Incoming Excise Invoices transaction.
    Activities
    For each rejection code, enter a code and a description. You can also specify whether the excise duty in the invoice is to be posted to the CENVAT on hold account, instead of the CENVAT clearing account.
    Specify Which Movement Types Involve Excise InvoicesUse
    In this IMG activity, you specify which movement types relating to goods receipts involve excise invoices.
    The system uses this information during the goods receipt procedure. When you post a goods receipt using one of the moevement types that you have specified here, the system prompts you to enter the excise invoice number.
    Note
    This option cannot be used for processing goods receipts without purchase orders.
    Maintain Default Excise Groups and Series Groups
    Use
    In this IMG activity, you specify which excise group and series group you want to appear in these fields by default. You can make separate settings for different combinations of sales organization, distribution channel, division, and shipping point.
    Activities
    This activity is optional, unless you want the system to automatically create outgoing excise invoices when you create a customer invoice.
    In this case, you must also make the appropriate setting in Customizing for Excise Duty, by choosing Basic Subcontracting Attributes
    Use
    The subcontracting attributes help determine conditions for a combination of an excise group, a transaction type, and a subtransaction type.
    The conditions such as the number of excise items per subcontracting challan, if the nonexciseable materials have to be filtered or not when the subcontracting challan is created, the movement type groups for issues and receipts and the hierarchy of determining the excise base value are mentioned here.
    Requirements
    Before you continue with this activity, work through the following activities:
    · Materials Management -> Inventory Management and Physical Inventory -> Goods Issue / Transfer Postings -> Define Screen Layout.
    For the movement type 541, maintain the field Purchase Order as an optional entry or as a required entry.
    · Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Maintain OutputTypes.
    Maintain the output type. On the Default Values tab, maintain the dispatch time and the transmission medium. Maintain the print parameter on the Print tab. This output type has to be maintained in this activity here.
    · Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Assign Forms andPrograms.
    Maintain the Program, FORM routine, and the form for the output type.
    · Materials Management -> Inventory Management and Physical Inventory -> Output Determination ->Printer Determination -> Printer Determination by Plant / Storage Location.
    Enter the output device that you use.
    Settings -> Maintain Excise Groups, and selecting Create EI (Create Excise Invoice Automatically).
    Maintain Movement Type Groups
    Use
    In this IMG activity, you group movement types together to form movement type groups.
    Definition: movement type
    Inventory Management (MM-IM)
    A classification key indicating the type of material movement (for example, goods receipt, goods issue, physical stock transfer).
    The movement type enables the system to find predefined posting rules determining how the accounts of the financial accounting system (stock and consumption accounts) are to be posted and how the stock fields in the material master record are to be updated.
    Return ->
    Definition: movement type
    Utilization Determination
    Use
    In this IMG activity, you specify which CENVAT accounts are to be debited by the Fortnight Utilization of CENVAT report: When the report calculates how much excise duty you must remit, it automatically proposes which CENVAT accounts the duty should be debited to. Here, you specify those defaults.
    You can either:
    · Debit all the excise duty to one account
    · Debit the excise duty to more than one account, in which case you specify which percentage is to be debited to each account
    Example
    If you want 50% of basic excise duty (BED) to be debited to the RG 23A account and the remaining 50% to the RG 23C account, you would make the following settings:
    Acct name BED perc.
    RG 23A BED account 50
    RG 23C BED account 50
    Alternatively, to debit all of the BED to the RG 23A account, and then RG 23C account, if there is not enough in the RG 23A account, you would make the following settings:
    Acct name BED perc. +
    RG 23A BED account X
    RG 23C BED account X
    When you come to run the report, the system takes the RG 23A account because it is the first one you have entered. If this account does not cover the BED, the system takes the RG 23C account instead.
    Maintain Minimum Balances for Excise Accounts
    Use
    In this IMG activity, you can maintain minimum balances in your excise accounts. When the balance in these accounts during utilization falls below this level, the system automatically utilizes funds in the PLA account.
    Activities
    Maintain the minimum balance amount for the excise accounts. If you have more than one excise group, you can maintain different minimum balances.
    Specify SAPscript Forms
    Use
    In this IMG activity, for each of your company codes, you specify which SAPscript forms the system prints the excise registers with.
    Standard settings
    Country Version India includes a number of sample SAPscript forms and printing programs, which you can use as follows:
    Reg. name Lay. no. Form Tcode/Prog
    RG 23A Part I 1 J_2IRG23A_PART1 J_2IRAP1
    RG 23C Part I 1 J_2IRG23C_PART1 J_2IRCP1
    RG 23A Part II 1 J_2IRG23A_PART2 J_2IRAP2
    RG 23C Part II 1 J_2IRG23C_PART2 J_2IRCP2
    PLA 1 J_2I_PLA J_2IPLA
    RG 23 D 1 J_2I_RG23D J_2IRG23
    RG 1 1 J_2I_RG1 J_2IRRG1
    RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
    RT 12 1 J_2I_RT12_ABSTRA J_2IRT12
    RT 12 1 J_2I_RT12_3 J_2IRT12
    The layout description can be left blank or an appropriate description maybe filled in. You may not change the register name. You can have your own layouts and maintain the name here. If the output device and number of copies are maintained it is automatically picked up for printing.
    Number Ranges
    You can maintain the number ranges for all CIN Number range objects using this transaction
    Activities
    Please maintain the number ranges for the folllowing objects The no nr has to be '01' for all
    1. j_1iintnum
    At an Excise group
    1. j_1irg23a1
    2. j_1irg23a2
    3. j_1iRG1
    4. j_1irg23c1
    5. j_1irg23c2
    6. j_1ipla2
    7. j_1iintpr2
    8. j_1irg23d
    9. j_1irg1_t ( material level)
    10. j_1iconpla ( if Consolidated PLA is used )
    At Series group
    1. j_1iexcloc
    2. j_1iexcexp
    3. j_1idepinv
    4. j_1i57Fc ( 57F Challans )
    Rewards if Helpful
    regards
    rb

  • Identify TAX condition type from pricing procedure

    Hello,
    I need to identify Tax condition type for various countries used in Old sales orders.We are moving to an external Tax engine and I need to identify what condition are being used to calculate tax in various countries. I know the pricing procedure but we have a lot of sales order and there is no documentation available.Is there any table where I can filter based on the sales org from existing sales order and find the Corresponding Tax condition type.
    Regards,
    Amanda

    One option is
    you have to execute SE16, input table KONV where you maintain the tax condition type and execute.
    System will populate all SD documents that are having that tax condition type.  There you have to copy the field "Doc. condition" and paste it in VBAK table in SE16 so that you will get all sale orders.
    The other option is
    you need to identify what access sequence is maintained for that tax condition type which you can see in V/06.  Next go to V/07, select this access sequence and execute.  There check what tables are maintained.  For example, in your case, it could be table 110.  So you have to develop a query by table joining A110 and VBAK in SQVI where you can take sale orders based on sales organisation.
    thanks
    G. Lakshmipathi

  • Condition type field when Define Pricing Procedure Determination

    Hello Gurus,
        there is a condition type field when Define Pricing Procedure Determination. what does it mean ?
    Many thanks,
    Frank Zhang

    Here is are the details of various fields while configuring pricing procedure.
    A. STEP
    This indicates the number of step-in the procedure.
    B. COUNTER
    This is used to show a second ministep
    C. CONDITION TYPE
    This is the most important component in the pricing procedure. The rates are picked up from this element, on the basis of the properties described.
    D. DESCRIPTION
    This forms the description of the condition type.
    E. FROM
    This is used to define the progression of the calculation and range of subtotals
    F. TO
    This is used to define the progression of the calculation and range of subtotals
    G. MANUAL
    This function enables to allow the condition type to be entered manually also apart from automatic pickup.
    H. MANDATORY
    This function identifies the conditions that are mandatory in the pricing procedure. The sales price is a mandatory condition type.
    I. STATISTICS
    This can be used to represent the cost price of the material sold, generally used for study statistical impacts of price
    J. PRINT
    The activation of this function will enable the printing of the values and conditions to the document.
    K. SUBTOTAL
    A key is assigned from the drop down menu; this can be used by the system in other area like Sis for reporting purpose also
    L. REQUIRMENT KEY
    This function is used to assign a requirement to the condition type. This requirement can be used to exclude the system from accessing the condition type and trying to determine the value. This can be used to specify that the condition type should only be accessed if the customer has a low risk credit.
    M. ALTERNATE CALCULATION TYPE
    This function allows you use a formula as an alternative in finding the value of the condition type, instead of standard condition technique. this can be used to calculate complex tax structures.
    N. ALTERNATE CONDITION BASE VALUE.
    The alternative condition base value is a formula assigned to a condition type in order to promote an alternative base value for the calculation of a value.
    O. ACCOUNTS KEY
    The account keys form part of account determination. These keys are used here to define the posting of the revenue generated to respective account heads& to subsequent assignment to GL accounts.
    PR00- ERL
    K007/KA00- ERS.
    KF00- ERFu2026u2026u2026u2026.& so On.
    P. ACCRUAL KEY.
    The accrual keys form part of account determination. These keys are used here to define the posting of the revenue generated to respective account heads& to subsequent assignment to GL accounts and payment to respective parties.
    Kalpesh

  • Related Pricing procedure

    Dear Gurus...,
    Can any body guide me the pricing procedure..
    I am looking to that , but i am not able to understand the following things.
    While going  M/08 Transaction -
    > selecting pricing procedure -
    > clicking the controls
    I am finding the table like this.
    Step-Counter-Condition typeDescription-FromToManual-RequiredStatisticsPrint-Sub totalRequirement-Call type--Base Type-Account Key----Accruels;;;;;;;
    Can any body explain this meaning and functions of this -
    ( I understood condtion type , Description , From , To)
    Please explain the remaining things clearly
    Rgds
    Surya

    Step - Number that determines the sequence of the conditions within a procedure.
    Counter-Access number of the conditions within a step in the pricing procedure.
    Condition type - The condition type is used for different functions. In pricing, for example, the condition type lets you differentiate between different kinds of discount; in output determination, between different output types such as order confirmation or delivery note; in batch determination, between different strategy types.
    Description u2013 Description of the condition type.
    From - Condition step, the value of which is the basis for percentage surcharges.(calculates the amount from the references step)
    To - Condition step up to which the condition values of the previous steps are totaled. .(calculates the amount up to the references step)
    Manually u2013 Conditions need to be entered manually.
    Mandatory - Indicates whether the condition is mandatory when the system carries out pricing using this pricing procedure.
    Statistical u2013 This will not include the amount to the net price.
    P-Print u2013 Prints in PO. u2018Su2019: Condition line is printed in totals block u2018Xu2019: Condition line is printed at item level.
    Sub total - Controls whether and in which fields condition amounts or subtotals (for example, a customer discount or the cost of a material) are stored. 9 u2013 Gross value, s u2013 effective value.
    Requirement u2013 It should fulfill the specified requirement.
    Alternative calculation type- Alternative formula to the formula in the standard system that determines a condition.
    Alternative formula for condition base value-Formula for determining the condition basis as an alternative to the standard.
    Account key - The account key enables the system to post amounts to certain types of revenue account. For example, the system can post freight charges (generated by the freight pricing condition) to the relevant freight revenue account.
    Accruals - Key which identifies various types of G/L accounts for accruals or provisions. With the aid of the account key, the system can post amounts to certain types of accruals accounts. For example, rebate accruals which are calculated from pricing conditions can be posted to the corresponding account for rebate accruals.
    Hope thsi helps
    Rakesh

  • Pricing procedure linkage to  EXIT_SAPLFYTX_USER_001 external tax calculati

    Hello friends,
    We are using sabris for external tax calculation. I am new to SD in our pricing procedure I need to make changes to add 20 more fields  to send to Sabrix. I understand that Pricing procedure calls   EXIT_SAPLFYTX_USER_001 for sending fields to sabrix .I wanted to know  how the PP is linked to the user exit and where I will need to add those fields.
    Any help will be appreciated
    Regards,
    Amanda

    Hi,
    Appedning only structure TAX_ALLOWED_FIELDS with the additional data elements  will not suffice as the actual structures that contain and pass the data to external system are TAX_CAL_ITEM_IN00, TAX_UPD_ITEM_IN00,,TAX_FRC_ITEM_IN00.
    TAX_CAL_ITEM_IN00 is used by tax interface during sales tax caluculation (When creating transactions like Sales order/ Invoice in SD or Purchase order/Invoice verification in MM)
    TAX_UPD_ITEM_IN00 this strucutre is used by SAP tax interface when it is updating the external system audit data base (Sabrix/taxware/vertex). (this occurs during Invoice released to accounts in SD, or invoice posting in MM)
    TAX_FRC_ITEM_IN00 is used by sap tax interface when sap does forced updated  to tax system audit data base(This happens because of various reasons if there is any interface issues or the tax calculated by external system is different from the one updated in sap, if any manual changes happens to the tax values in the transaction document)
    Please go through the doucmentaion provided by your tax engine supplier, it has very good information on how the interface works
    Thanks,
    Srini

  • Billing Document - Pricing Procedure.

    We want that at the time of billing Document,system should accept one extra Discount condition at Item Level automatically with some value which we want to put in the saystem or we will control using Exit & it should come on Calucating total Value.
    I want to know that can we do this.I dnt want to put DIscount Value at the time of Sales Order creation,but in billing doucment it should show one extra condition .
    Can it be done.
    Please help me to build this process.
    Viru.

    Hi !
    There can be various ways to do achieve this but I am listing few that I can think of,
    1. you could use some parameter may be like account assignment to  be maintained at invoice to triger this condition type at billing.
    2.assign a different pricing procedure at invoice which has additional condition type and will be triggered.
    3. you may use reference document number in invoice as feild in table of pricing procedure to triger this condition type.
    I hope it helps. Good day.

  • Pricing procedure+TAXINN

    Pl. give me configuration documents on Pricing +TAXINN procedure.
    E mail [email protected]
    Thanks
    Vaibhav

    In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenario's. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
    Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better):
    Country Version India comes with four pricing procedures as follows:
    1. JINFAC (Sales from manufacturing plants)
    2. JINEXP (Export sales)
    3. JINDEP (Sales from depots)
    4. JINSTK (Stock transfers
    CIN:
    IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
    Maintain Excise Registrations
    Use
    In this IMG activity, you maintain the data relating to your excise registrations.
    Enter each of your excise registrations, specifying a four-character code for each Excise Registration IDs
    In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
    Activities
    For each excise registration in your business create a registration ID, and state:
    1. Which taxes the registration covers (additional excise duty, special excise duty, and cess)Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
    2. The maximum number of items to be printed on each excise invoice
    3. Whether you are allowed partial CENVAT credits
    Maintain Registration ID NUMBER, Excise code number, excise registration number
    Excise Registration Number
    A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
    Every entity with an excise registration number is required to keep its own excise books.
    ECC Number
    Specifies the organization's ECC number.
    Excise Registration Number
    A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
    Every entity with an excise registration number is required to keep its own excise books.
    Excise range: Specifies the excise range in whose area the excise registration is located.
    Excise Division
    Specifies the excise division in whose area the excise registration is located.
    Excise Collectorate
    The code of the excise collectorate in whose area the excise registration is located.
    Indicator for confirming AED usage
    Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
    Example
    Additional Excise duty is leviable in case of textile products, tobacco and sugar.
    Similarly for SED CESS
    Number of Items in Excise Invoice
    Shows the maximum number of line items that the authorities allow per excise invoice.
    This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
    This information is used to split the transfer postings' items into multiple subcontracting challans.
    Excise register set description
    Description of the excise registers set.
    Partial CENVAT Credit
    Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
    Dependencies
    When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
    This information is also shown when you post the vendor's excise invoice.
    Maintain Company Code Settings
    Use
    In this IMG activity, you maintain the data relating to your company codes.
    Document Type for CENVAT Postings
    It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
    Indicator for providing debit account overwriting
    Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
    Automatic balance Indicator
    Excise year start month
    The calendar month marking the beginning of the excise year
    Use
    This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
    Excise invoice selection procedure
    Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
    Number of excise invoices to be selected
    Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
    Days to be considered for excise invoice selection
    Number of days from document date for excise invoice selection.
    Example
    If the value of this field is 20 and today is 28-03-97. The excise
    invoice selection will show the related invoices only for the
    period 08-03-97 to 28-03-97.
    Document type for TDS FI posting
    Financial accounting document type for TDS posting.
    Document type for FI posting on Utilisation
    Financial accounting document type for TDS posting.
    Indicator for item level excise duty round off
    This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
    Rounding off of Excise duty for outgoing excise invoice
    You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
    Immediate Credit on Capital Goods
    Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
    The rest is posted the CENVAT on hold account, for use in the following year.
    CVD Clearing Account
    Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
    Exchange rate type
    Key representing a type of exchange rate in the system.
    Use
    You enter the exchange rate type to store different exchange rates.
    Example
    You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
    Exchange rate type to be used for Export excise duty converts
    When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
    Maintain Plant Settings
    Use
    In this IMG activity, you maintain excise information relating to your plants.
    Plant Settings
    In this activity, you maintain excise information relating to your plants.
    Activities
    For each plant:
    1. Specify whether it is a manufacturing site or a depot.
    2. Assign it an excise registration ID.
    You can assign the same ID to more than one plant, if required.
    Depot
    Indicates that the plant in question is a depot.
    Dependencies
    Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    Number of goods receipt per excise invoice.
    Multiple GR for one excise invoice, Single credit
    Multiple GR for one excise invoice, Multiple credit
    Maintain Excise Groups
    Use
    In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
    Excise Groups
    In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
    Recommendation
    Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
    If your company has only one set of excise registers, then you need to maintain only one excise group.
    Activities
    1. Create one excise group for each set of registers that you need to keep.
    1. Assign the excise groups to plants.
    2. Maintain whether this Excise group is for a depot or not.
    3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
    4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
    5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
    6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
    7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
    8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
    9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
    10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
    11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
    • Excise Group
    Governs which set of excise registers a business transaction will be included in.
    Following is the relation between excise group, plant and registration.
    Dependencies
    In define excise groups in Customizing.
    Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
    At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
    Indicates that the plant in question is a depot.
    Dependencies
    Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    GR Per Excise Invoice
    Multiple GR for one excise invoice , Multiple credit
    Multiple GR for one excise invoice , Single Credit
    Create Excise Invoice Automatically
    Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
    The excise invoice is created in the background.
    If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
    RG23D Sales Creation and posting option
    RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
    If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
    If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
    Default excise qty in GR
    If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
    Folio number for depo
    Posting
    If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
    Also we can set indicator for creation of part 1 for:
    Blocked stock
    Stock transport order
    Consignment stock
    Maintain Series Groups
    Use
    In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
    Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    Activities
    1. Define excise series groups based on type of outgoing document
    2. Assign series group to excise registration ID
    3. If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    4. If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
    Example
    You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
    No account postings for CENVAT in sales cycle
    No utilization Flag
    If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
    IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
    Immediate Utilization of CENVAT
    Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
    If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
    Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
    Maintain Excise Duty Indicators
    Use
    In this IMG activity, you maintain the excise duty indicators.
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Select Tax Calculation Procedure
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
    1. If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    2. If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
    Maintain Excise Defaults
    Use
    In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    Activities
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    1. Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    2. Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    3. Specify the conditions in the sales order that are used for excise rates.
    4. Specify the countervailing duty condition type used for import purchase orders.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Condition-Based Excise Determination
    Use
    When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
    Features
    The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
    Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
    When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
    Activities
    Customizing
    Make the settings in Customizing Basic? India?for Logistics - General, by choosing Taxes on Goods Movements Account? Excise Duties Using Condition Technique and ...?Settings Determination.
    These activities include one activity where you define a tax code for condition-based excise determination.
    Master Data
    Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
    Day-to-Day Activities
    When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
    When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
    Creating Condition Records for Excise Duty
    1. In the command field, enter FV11 and choose .
    2. Enter the condition type that you want to create a condition record for and choose .
    The Key Combination dialog box appears.
    3. Select the combination of objects that you want to create the condition record for.
    On the dialog box, Control Code means "chapter ID."
    So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
    4. Choose .
    5. Enter data as required.
    In the Tax Code field, enter the dummy tax code that you have defined.
    6. Save the condition record.
    Formula-Based Excise Determination
    Use
    When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
    Prerequisites
    In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data?access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.?
    You maintain the following types of data:
    1. Plant master data
    You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
    See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
    2. Vendor master data
    For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type - for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
    For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
    3. Customer master data
    Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
    Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
    4. Material master data
    Each material is assigned a chapter ID.
    5. Excise tax rate
    For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
    If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
    Activities
    Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
    1. Looks up the customer master data to see what status you have assigned the customer.
    Let's assume you've assigned the customer status 3.
    2. Looks up the plant master data to see what status you have assigned the plant.
    Similarly, your plant has status 2.
    3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
    4. The system determines the chapter ID of the ball bearing for the plant.
    Let's assume the chapter ID at plant for the ball bearings is 1000.01.
    5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
    Define Tax Code for Purchasing Documents
    In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
    Only carry out this activity if you use condition-based excise determination.
    Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    Assign Tax Code to Company Codes
    Use
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    Classify Condition Types
    In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
    The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
    In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    1. For taxes on purchases, use the condition types contained in the tax procedure.
    2. For taxes on sales, use the condition types contained in the pricing procedures.
    Standard settings
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
    Define G/L Accounts for Taxes
    In this IMG activity, you specify which G/L accounts you will use to record which taxes. You have set up G/L accounts for each of the processing keys listed below.
    Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
    1. VS1 (basic excise duty)
    2. VS2 (additional excise duty)
    3. VS3 (special excise duty)
    4. VS5 (sales tax setoff)
    5. MWS (central sales tax)
    6. MW3 (local sales tax)
    7. ESA (service tax)
    8. ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction
    In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
    If you use subtransaction types, enter the accounts for each subtransaction type as well.
    Activities
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
    The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example
    Excise TT DC ind Account name
    GRPO CR CENVAT clearing account
    GRPO CR RG 23 BED account
    GRPO DR CENVAT on hld account
    Specify G/L Accounts per Excise Transaction
    In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
    When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
    1. Excise group
    2. Company code
    3. Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
    Requirements
    You have already:
    1. Defined the G/L accounts
    2. Defined the excise groups
    3. Maintained the transaction accounts
    Activities
    For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
    Note
    You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
    Config setting needed to be done in order to get the Excise Details Screen in Material Master.
    Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
    Following document helps you to do this configuration.
    ? Material Master ? Logistics General ?1. Go to IMG Define Structure of Data Screen for each?Configuring the Material master Screen Sequence.
    2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
    3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is "Foreign Trade: Import Data". Select the same and click on Subscreens in the left frame.
    4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
    5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 - 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
    6. Save the setting.
    7. Create a Material Master and check whether in Screen Foreign Trade - Import, Excise related subscreen appears.
    Reward points if helpful,
    Rewards,
    Archit

  • Pricing procedure i

    hii Experts
    I know how to configure pricing procedure in MM
    Now some experts can tel me how i can develop more knowledge MM pricing procedure in SAP.???
    what is best way to become good in pricing procedure ....
    Explain me the way with some some future examples ...
    Thanks

    Hi,
    Access sequence:* An access sequence is a search strategy with the aid of which the SAP System searches for valid condition records of a certain condition type from the valid table and fetches the value in PO. *Condition type:* The condition types are used to represent pricing elements such as prices, discounts, surcharges, taxes, or delivery costs in the SAP System. These are stored in the system in condition records. Basically in Pricing procedure there 16 step/ column which are their own importance in pricing procedure the derive the value based on this configuration. Would like brief each and every field as under. *Step:* Number that determines the sequence of the conditions within a procedure. (This starts calculation based on from and to) *Counter:* Access number of the conditions within a step in the pricing procedure. During automatic pricing, the system takes into account the sequence specified by the counter. Ex if you are having freight condition type it is be possible to have different freight combination as per qty freight, fixed value freight & freight % on gross in this case you can have same from but o,1,2 different counter as whichever is applicable system will draws this condition fro step & counter. *Condition type:* The condition type is used for different functions. In pricing, for example, the condition type lets you differentiate between different kinds of discount, gross, freight, *Description:* Description of the condition type. *From:* Condition step, the value of which is the basis for percentage surcharges. If you specify a to reference step at the same time, the condition values of the two steps specified and the conditions values of the steps in between are totalled. *To:* Condition step up to which the condition values of the previous steps are totalled. Percentage surcharges are calculated on the basis of the total. If you specify a from reference step at the same time, the condition values of the two steps specified and the condition values of the steps in between are totalled. *Manual:* Conditions, that are given this indicator in the pricing procedure, are only included in determination either if they are entered manually, for example, on the condition overview screen in Pricing or if they are transferred from an external process. Here user has to enter the value system will determine automatically *Requirement:* Indicates whether the condition is mandatory when the system carries out pricing using this pricing procedure. For example, you always want to include a tax condition (VAT or sales tax) during pricing; you can set this indicator for the appropriate tax condition type. *Statistical:* This indicator causes a surcharge or discount to be set in the document statistically (that is, without altering the value or adding to the value Ex; if Gross + discount+ freight= 1000 this is statistical value). *Print:* Controls issue of condition lines when printing documents such as order confirmations or invoices. *Subtotal:* Controls whether and in which fields condition amounts or subtotals (for example, a customer discount or the cost of a material) are stored. If the same fields are used to store different condition amounts, the system totals the individual amounts. Ex if you wish to add freight to the Gross then taxes on the gross have to use subtotal 4 condition value of which will added to the gross. *Requirement:* If the requirement is fulfilled then output determination also takes into consideration output type or the access sequence, for which the requirement has been specified. *Calculation type:* Alternative formula to the formula in the standard system that determines a condition. *Condition base* calculation: Formula for determining the condition basis as an alternative to the standard. *Account key:* Key that identifies different types of G/L account. The account key enables the system to post amounts to certain types revenue account. For example, the system can post freight charges (generated by the freight pricing condition) to the relevant freight revenue account. *Accruals:* Key which identifies various types of G/L accounts for accruals or provisions. Hope this helps you.
    Edited by: Shubham RT on Aug 17, 2010 1:53 PM

  • Mandatory to Use Std CIN Pricing Procedures?

    Hai All,
               CIN, we have few std pricing procedures such as JINEXP,JINFACT etc..,
    is it mandatory to use the same pricing procedures by copying-
    or we can create our own without copying existing- bcoz in CIN PP- we wont have req'd cond types
    is it mandatory to have ED total cond types in our SD pricing procedure?
    just need a confirmation-  as am already using the my own SD PP

    Pricing Procedure datas are  dependent with some 25 to 30 entries and it is always recommended to copy the standard so that you need not worry about these dependent areas.
    On the other hand, If you are creating on your own without copying the standard, then you should double ensure that you have configured / assigned all those dependent entries also as otherwise, due to some reason or the other, while creating SD documents, you will face various issues and you cannot detect the root cause and you have to break your head unnecessarily which can be avoided.
    thanks
    G. Lakshmipathi

  • Butter stuff on Pricing Procedure Understanding

    Hi Gurus
    Please help me on Pricing Procedure Understating , Detail functionality of fileds , like   From , To, SubTo, Reqt, Altcty etc.
    Regards\Adnan

    Hello Adnan,
    Pricing –
         Menu path – IMG – sales & distribution – basic functions – pricing – pricing control – define & assign pricing procedures – maintain pricing procedures (V/08).
         A pricing procedure consists of a list of condition types in a defined order, such as price, less discount, plus tax. Some controls exist in the pricing procedure. For example you can specify that a condition type is mandatory; it must have an entry defined either automatically or entered manually.
         The pricing procedure is also used in account determination. This determines the general ledge (GL) accounts to which the prices, discounts and taxes must be posted. The condition types in the pricing procedure are linked to an account key. This key in turn is linked to the GL Accounts. This shows the integration between the pricing in the invoice and the financial accounting module.
         It is suggested to use to the SAP standard pricing procedure RVAA01 to copy and make necessary changes according to the requirement while configuring a pricing procedure. The following is the control data of the pricing procedure in detail –
    1.     Step – this indicates the number of steps in the procedure. The first condition type should be step 10; the second condition type should be step 20 and so on. It is possible to number the steps in the intervals of 1, but it is not suggestible as it may cause inconvenience when changing the procedure in future.
    2.     Condition counter – this is used to show a second mini-step within an actual step. For example, you may have assigned all you freight surcharges to step 100. However there may be three condition types, each representing a different freight surcharge. Thus you can assign a freight condition type to step 100, counter 1; another to step 100, counter 2; another to step 100, counter 3 and so on.
    3.     Condition type – this is the backbone of the pricing procedure. The condition type is the link from the access sequence all the way to the actual condition record. When you enter a condition type, the description field is automatically filled in with the description from the condition type.
         Note: A description without a condition type can be entered for sub-total or total or net price in between the condition types in the control data.
    4.     From & To columns – these are used in two circumstances –
    a)     To define the range for a sub-total – for example, if you want to add up all the condition types from step 10 to step 50; you would enter 10 and 50 in the From and To columns respectively.
    b)     To define the basis for a calculation – for example, if a discount is defined as a percentage, you need to indicate which step must be used as the basis for the calculation. If the calculation must be performed from step 100, you would enter 100 in the From field.
    5.     Conditions determined manually – indicates if the condition type it is assigned to is allowed to be processed automatically or only manually. Conditions, that are given this indicator in the pricing procedure, are only included in determination (price determination, output determination, and batch determination) either if they are entered manually, for example, on the condition overview screen in Pricing or if they are transferred from an external process, such as costing.
    6.     (Note: when assigning the pricing procedure to the sales documents, a condition type is also assigned to it; reason being that the condition type assigned to the sales document here is displayed in the sales document item level which can be manually changed - provided it is indicated while configuring the control data  - conditions determined manually). This feature is more often used in case of costing and output determination.
    7.     Condition is Mandatory – the mandatory column identifies those condition types that are mandatory in the pricing procedure. Mandatory condition types are the sales price or the cost price. If the mandatory condition is missing in the pricing procedure, the system has an error in pricing and the respective sales order cannot be processed.
    8.     Condition is used for statistics - This indicator causes a surcharge or discount to be set in the document statistically (that is, without altering the value). This can be used to represent the cost price of the material sold.
    9.     Print – determines which descriptions and associated values assigned to a step are printed on a document, such as order confirmation.
    10.     Condition Subtotal - Controls whether and in which fields condition amounts or subtotals (for example, a customer discount or the cost of a material) are stored. If the same fields are used to store different condition amounts, the system totals the individual amounts. These condition amounts or subtotals are used as a starting point for further calculations. You may, for example, want a subtotal of all the discounts included in the pricing of a sales order. These subtotals are used in other areas of the system such as in logistics information system. It is recommended that you assign the subtotal field 4 to the total value in the pricing procedure for Freight.
    11.     Requirement – this column is used to assign a requirement to the condition type. This requirement can then be used to exclude the system from accessing the condition type and trying to determine a value. This can be used to specify that the condition type, a discount, should only be accessed if the customer has a low risk credit group.
    12.     Alternative calculation type - specifies that the system is to use the formula represented in this column as an alternative in finding the value of the condition type, rather than by using the standard condition technique. This can be used to calculate complex tax scenarios. This field is used in obtaining values such as “Net Price”, ‘Profit Margin’ – where there wouldn’t be any access sequence to get the required value. Instead the system calculates net value using the existing amounts and the alternative calculation types. (formula: profit margin = net value – cost price)
    13.     Alternative condition base value – is a formula assigned to a condition type in order to promote an alternative base value for the calculation of a value. For example, one can specify a formula that uses a subtotal, such as 4, from the subtotal field; modify it slightly, such as dividing it by 2, and then using the resultant value as a base value for the condition type.
    14.     Account key - Key that identifies different types of G/L accounts. The account key enables the system to post amounts to certain types of revenue account. For example, the system can post freight charges (generated by the freight pricing condition) to the relevant freight revenue account.
    15.     Account key – accruals/provisions - Key which identifies various types of G/L accounts for accruals or provisions. With the aid of the account key, the system can post amounts to certain types of accruals accounts. For example, rebate accruals which are calculated from pricing conditions can be posted to the corresponding account for rebate accruals.
    REWARD POINTS IF HELPFUL
    Regards
    Sai

  • Pricing procedure of free goods

    Could anyone please tell me the effect of pricing procedure in free godds?And what is the difference between pricing procedure in free goods(IMG->Sales and Distribution->Basic Funcions->Free Goods) and pricing procedure in pricing(IMG->Sales and Distribution->Basic Funcions->Pricing)

    Hi Wei Zhang,
    When there are more than 2 materials say material A which is of some price, and material B which is Free of cost, then the item category will be different for those. TAN for Mat A and TANN for materail B.
    Pricing is depends upon the customer pricing procedure and document pricing procedure along with the Sales Area.
    When there are free Goods, Again yu have two conditions
    1. Give 100 % discount on free goods.
    2. Or charge 0 value for that.
    This pricing procedure you can do in free goods priocing procedure.
    Hope this will help.
    Thanks,
    Raja

  • Problem in pricing procedure of scheduling agreement

    Dear All,
    I am creating a scheduling agreement, when i am giving condition type at item level a message occur "Condition type XXXX is not in procedure A M ZB1002" Message no. VK045.
    I am not able to understand from where this pricing procedure is picking. But in Define Schema Determination the pricing procedure is different, it is ZBLOSR.
    The same case is happening in info record while maintaining condition type, the same pricing procedure ZB1002 is picking up by default. I want to change the pricing procedure.
    Please help.....

    hi..
    have u maintained the combination of schema group for vendor schema group, purchasing org and pricing procedure...
    and assign this vendor schema group to vendor master...
    From this combination system getch the pricing procedure for particular vendor...
    go to spro..MM ..Purchasing..Condition...Define Price Determination Process..Define Schema Group..
    check these settings...
    Hope it works..
    Thanks..

Maybe you are looking for

  • FCP 5 & Motion2 question

    Hi All, hope this question isn't a silly one. When I go to the send to (motion) option in FCP the media goes off-line, once I am in Motion I get asked the question to reconnect, however the name of the file it asks for is not the exact same one I am

  • Hw problems or ext3 bug?

    Hi, This message is posted in "Workstation User" and "Kernel and HW issues" because I'm not sure what the problem is. I'm having a problem with ext3 partition and I'm not sure if it's a bug o what. It has happened 3 times yesterday (Sunday), before I

  • Won't perform S/W update

    Yesterday my Mac told me there were updates available for iTunes, iMovie etc.. however I was in the middle of something and as they required a restart I didn't proceed with the update. Now I want to do the update and the S/W update tool tells me ther

  • Click on Simple tree

    Hi Experts, I have a problem ,please help me. I need event is trigger on single click on node of simple tree.There is event of double click but i need on single click only. If you have any test program please forward it also. Ankur Garg.

  • ECM - Eligibility

    I have configured an eligibility rule variant and grouping based on my merit compensation plan and employee group and sub-group.  I setup the feature to look for full-time employees.  I did not set any strict eligibility rules because the system is b