Various system start problems

I get the following errors on system start up: (kernel26-2.6.27.6-1, udev 130-1)
1.
udevd[356]: specified group 'optical' unknown
udevd[356]: specified group 'disk' unknown
(... for every group)
2.
/etc/rc.sysinit: eval: line 223: syntax error near unexpected token `newline`
/etc/rc.sysinit: eval: line 223: `do_crypt <device DEVNO="..." TIME="..." LABEL="archlinux" UUID="..." SEC_TYPE="ext" TYPE="ext3">/dev/sdb2</device>`
(... for every partition)
3.
Boot process gets stuck when 'Starting Network', I do not think it is a network issue because it is simply stuck and it does not break with a timeout.
I had a filesystem issue some days ago, but I *think* I fixed it properly (e2fsck), so there is a slight possibility I damaged it.
What are the key problems behind all this?
Last edited by jakobm (2008-12-04 20:51:23)

jakobm wrote:
1.
udevd[356]: specified group 'optical' unknown
udevd[356]: specified group 'disk' unknown
(... for every group)
/etc/groups... does that file exist?  if udev can't find *any* groups, it sounds like no.
2.
/etc/rc.sysinit: eval: line 223: syntax error near unexpected token `newline`
/etc/rc.sysinit: eval: line 223: `do_crypt <device DEVNO="..." TIME="..." LABEL="archlinux" UUID="..." SEC_TYPE="ext" TYPE="ext3">/dev/sdb2</device>`
(... for every partition)
um, can you post the your /etc/crypttab?  line 223 of /etc/rc.sysinit is
eval do_crypt "$line"
and $line is a line of /etc/crypttab.  but everything after do_crypt in your code snippet looks nothing like a crypttab line.
Boot process gets stuck when 'Starting Network', I do not think it is a network issue because it is simply stuck and it does not break with a timeout.
have you defined network interfaces, routes, etc. in /etc/rc.conf?  hell, please post yr rc.conf!

Similar Messages

  • System starting problem

    My system is not re booting  why?

    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • OSX Mavericks Wifi connection problem when system starts

    My macbook pro unable to connect to the preset wifi when system started, same whether starts and ready from sleep-mode, or previous shutdown mode.
    This starts to happen just several weeks recently.
    However, after restart the entire OSx, the connection (auto detect and connect) would be back to normal.
    What's wrong? and any idea to solve this problem? Restart the OS takes very long time, and I don't like to waste time everytime open the laptop.
    Please help. Thanks.

    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About
    Also try turning off Bluetooth

  • STARTSAP_NBAS - status NO SYSTEM START

    Hi all,
    I'm upgrading R/3 4.7 to ERP 6.0 SR3 NUC; Windows 2008 + SQL Server 2008. I'm in weekend downtime. In phase status STARTSAP_NBAS I have the error:
    UPGRADEPHASE STARTSAP_NBAS
    ...started at 20140222060031
    # Reading Parameter File "D:\usr\sap\put\bin\ALPALL.LST" at 20140222060031
    ..finished at 20140222060636 with status NO SYSTEM START.
    ...begin dialogue at 20140222060636
    tp.ECO log:
    SAPup>  Starting subprocess tp.exe with id 5024 at 20140222061006
    EXECUTING D:\usr\sap\<SID>\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\SHADOW.TPP unlocksys <SID>
    Environment: dbms_type=mss
    Environment: dbs_mss_schema=<sid>
    initial value of NLS_LANG: '<NULL>'
    This is D:\usr\sap\<SID>\SYS\exe\run\tp.exe version 372.05.88 (release 700)
    Warning: Parameter INTERRUPT is no longer used.
    Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
    Warning: Parameter WITH_TACOB is no longer used.
    Warning: Parameter IMPDP_BY_EVENT is no longer used.
    Warning: Parameter INTERRUPT is no longer used.
    Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
    Warning: Parameter WITH_TACOB is no longer used.
    Warning: Parameter IMPDP_BY_EVENT is no longer used.
    TRACE-INFO: 1:  [     dev trc,00000]  Sat Feb 22 06:10:08 2014                                                         2182  0.002182
    TRACE-INFO: 2:  [     dev trc,00000]  DlLoadLib success: LoadLibrary("dbmssslib.dll"), hdl 0, addr 0000000187740000
    TRACE-INFO: 3:                                                                                                           10  0.002192
    TRACE-INFO: 4:  [     dev trc,00000]      using "D:\usr\sap\<SID>\SYS\exe\run\dbmssslib.dll"                                9  0.002201
    TRACE-INFO: 5:  [     dev trc,00000]  Thread ID:5516                                                                   1590  0.003791
    TRACE-INFO: 6:  [     dev trc,00000]  Thank You for using the SLODBC-interface                                           11  0.003802
    TRACE-INFO: 7:  [     dev trc,00000]  Using dynamic link library 'D:\usr\sap\<SID>\SYS\exe\run\dbmssslib.dll'              19  0.003821
    TRACE-INFO: 8:  [     dev trc,00000]  dbmssslib.dll patch info                                                           40  0.003861
    TRACE-INFO: 9:  [     dev trc,00000]    SAP patchlevel  0                                                                 9  0.003870
    TRACE-INFO: 10:  [     dev trc,00000]    SAP patchno  353                                                                  8  0.003878
    TRACE-INFO: 11:  [     dev trc,00000]    Last MSSQL DBSL patchlevel 0                                                     11  0.003889
    TRACE-INFO: 12:  [     dev trc,00000]    Last MSSQL DBSL patchno         350                                               9  0.003898
    TRACE-INFO: 13:  [     dev trc,00000]    Last MSSQL DBSL patchcomment Work process can not be cancelled (1740162)         12  0.003910
    TRACE-INFO: 14:  [     dev trc,00000]  lpc:(local) connection used on SAP<SID>                                             534  0.004444
    TRACE-INFO: 15:  [     dev trc,00000]  ERROR: -1 in function ExecuteAndFlush (SQLExecDirect) [line 5520]               78212  0.082656
    TRACE-INFO: 16:  [     dev trc,00000]  (15157) [42000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Setuser failed because of one of the following reasons: the database principal '<sid>_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    TRACE-INFO: 17:                                                                                                           29  0.082685
    TRACE-INFO: 18:  [     dev trc,00000]  <if user_name() != '<sid>_shd' setuser '<sid>_shd'> failed -- connect terminated       32  0.082717
    TRACE-INFO: 19:  [    dblink  ,00433]  ***LOG BY2=>sql error 15157  performing CON [dblink#8 @ 433]                       57  0.082774
    TRACE-INFO: 20:  [    dblink  ,00433]  ***LOG BY0=>Setuser failed because of one of the following reasons: the database principal '<sid>_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission. [dblink#8 @ 433]
    TRACE-INFO: 21:                                                                                                           23  0.082797
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0232
    tp finished with return code: 232
    meaning:
      connect failed
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    ERROR: Connect to <SID> failed (20140222061008, probably wrong environment).
    Process with ID 1756 terminated with status 232
    <SID>Adm User has this environment variables:
    dbms/type = mss
    dbs/mss/server = <HOST>
    dbs/mss/dbname = <SID>
    dbs/mss/schema = <sid>
    I check the following SAP Notes:
    - 128126 - Database connect for external tools
    - 525677 - Problems when starting shadow instance
    - 592514 - MSSQL: internal database users, permissions and security
    - 1294762 - SCHEMA4SAP.VBS
    - 1727986 - Upgrade Phase MAIN_NEWBAS/STARTSAP_NBAS: Error Starting SAP
    - 1910759 - Start of Shadow Instance Failed during upgrade
    but any of them, help me to fix the stopper.
    Can anybody give me any idea, please?

    Hi Javier,
    Have you tried by executing script mssupgsps.sql ,which you can find under D:\usr\sap\put\bin.This script will create stored procedure sap_upg_getrelease.
    After execution provide grant with following
    add setuser '<sid>'
    grant all on sap_upg_getrelease to <sid>_shd
    Hope this will help you.
    Regards,
    Gaurav

  • Various E Mail problems: Junk Mail, Log Off, etc

    I am having various and frustrating problems that are intermittant.
    I have two incoming e mail accounts, one is IMAP and one is POP.
    1. Junk Mail. After having reset my junk mail settings as advised on this site just a few days ago, I am continuing to experience this problem. Messages that the systems "knows" is Junk Mail do NOT go to Junk Mail folder, but to the regular In box. It knows they are Junk Mail because the Tab for changing the message at top of screen says "Not Junk", which means it thinks it is JUNK. They why won't it go into Junk Mail folder?
    2. When I try to delete these messages one by one in In box, the computer "freezes" and takes forever to delete the messages. The In box counter on left hand side of the screen does not decrease as I delete messages, but takes a long time (minutes) to catch up with the deletions.
    3. When receiving certain e mail from specific recipients, the system intermittantly says "message not dowloaded from server, you need to take this account on line". Well. it IS online! Again, this does not happen all the time, but often enough and from the same e mail recipients) that it is very frustrating.
    4. Oftentimes when I try to shut down, I get the dreaded spinning color wheel, only to have to force quit. This is a lengthy process, and then I lose all of the deletions that I have tried to make to my Inbox.
    Are all of these problems somehow related? Cumulatively, they are very frustrating. I never had these kinds of issues with Windows Mail apps. Uuughh!
    Thanks for reading and any assistance.

    There appears to be a problem with the index.
    Verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
    1. Quit Mail if it’s running.
    2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is locally stored.
    3. Locate Envelope Index and move it to the Trash. If you see any other “Envelope Index”-named file there, delete it as well.
    4. Move the “IMAP-” account folder to the Trash. Note that you can do this with IMAP-type accounts because they store mail on the server and Mail can easily re-create them. DON’T trash any “POP-” account folders, as that would cause all mail stored there to be lost.
    5. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index — Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
    6. As a side effect of having removed the IMAP account folder, that accounts may be in an “offline” state now. Do Mailbox > Go Online to bring it back online.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.
    <hr>
    If the problem persists, what are your Preferences > Accounts > Mailbox Behaviors > Junk settings, particularly for the IMAP account?
    Also, what have you done to “reset [your] junk mail settings as advised on this site”? This is what I’d suggest:
    1. Go to Preferences > Junk Mail, disable junk mail filtering, then enable it again. This resets the rule that governs what the junk filter does.
    2. Choose either Training or Automatic mode (it doesn’t matter) and leave the other options checked. Click Advanced to see how the junk filter rule is defined now if you want, but don’t touch anything there.
    3. Reset the junk filter database (Preferences > Junk Mail > Reset).
    4. Open Window > Previous Recipients and get rid of any addresses that you don’t want Mail to treat as legit.

  • Agent and TNSListener service can not run when system starting

    The Agent and TNSListener services can not run automaticaly when system startes.If run Agent service by hand in control panel,system prompt 3221356559 error message.If run TNSListener service in control panel,system prompt none.But after refresh,TNSListener service is not running.How can i do next?Thanks very much!

    geno.nullfree wrote:
    I'm not sure but since it's saying there's a library issue, you could try running:
    # ldconfig
    Failing that you could try a:
    # pacman -Rns slim
    # pacman -Syu slim
    I tried both "ldconfig" and "pacman -XXX", but the problem is still there.
    Maybe I need use another way to recompile slim in my machine.
    But I have no time to test it now, I will try it another day.
    Thx for replies.

  • Launching AIR application When Operating system starts

    Hi
    I want to lauch my AIR application automatically when windows operating system starts. How can i solve this problem.
    Thanks in advance to all
    Regards
    sss

    I found some information about this here:
    http://www.adobe.com/devnet/air/flex/quickstart/startup_options.html

  • Connection at system start

    Hi,
    since system upgrade (about 2 weeks ago) i have problem with estabilish internet connection at system start.
    To connect i have to:
    ifconfig ra0 10.14.1.4 broadcast 10.14.1.255 netmask 255.255.255.0
    iwconfig ra0 essid WiNet-AP14 mode 2 channel 7
    but, even before it iwconfig and ifconfig looks ok:
    iwconfig:
    ra0       RT2400PCI  ESSID:"WiNet-AP14"
              Mode:Managed  Channel=7  Bit Rate:11 Mb/s   
              RTS thr:off   Fragment thr:off
              Encryption key:off
    ifconfig:
    ra0       Link encap:Ethernet  HWaddr 00:0C:76:CA:85:7C
              inet addr:10.14.1.4  Bcast:10.14.1.255  Mask:255.255.255.0
              inet6 addr: fe80::20c:76ff:feca:857c/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
              Interrupt:17 Base address:0x4000
    any ideas?
    /etc/rc.conf and /etc/conf.d/wireless seems to be fine.
    i'm using card with rt2400 chip. drivers from http://rt2x00.serialmonkey.com/wiki/ind … =Main_Page (i tried with beta and daily)
    sorry for my english.
    Last edited by edpl (2007-06-21 12:57:34)

    in /var/log.everything.log
    i found line:
    Jun 22 13:57:45 skrzynia ra0: no IPv6 routers present
    and in messages.log:
    Jun 22 13:59:50 skrzynia ***RT2400***: !!! MLME busy, NIC will be reset!!!
    Last edited by edpl (2007-06-22 13:22:24)

  • What are the various system variabels in ABAP

    What are the various system variabels in ABAP?

    u can view all the system variables in SYST TABLE Also   ...............
    ABAP System Fields
    ABAP system fields are always available in ABAP programs. The runtime system fills them according to context. They can then be used in programs to query the system status. System fields are variables but you should always treat them as though they were constants, and only read them. If you change their values, important information for the flow of the program may be lost. In exceptional circumstances, system fields may be overwritten in an ABAP program to control the system – for example, SY-LSIND (for navigating to a detail list).
    With one exception the names and data types of the system fields are stored in the ABAP Dictionary in the SYST structure and realized as components of the predefined structure SY in ABAP programs.
    The system field SY-REPID is not part of SYST or SY. Instead, every program contains the predefined constants SY-REPID and SYST-REPID, which both contain the name of the corresponding program. Furthermore, there are two predefined types of the same name, SY-REPID and SYST-REPID.
    All system fields are addressed using SY field name and their types using SYST field name.
                                                                                    Alphabetical Overview
    The following table lists the definitions of the structure SYST in the ABAP Dictionary alphabetically. The character in the first column indicates how you can use the corresponding system field in ABAP programs. Name is the name of the component, Type is the Dictionary data type, and Length is the field length defined in the Dictionary. The Use column shows in which environment the system fields are set. The Description indicates the content.
    Name
    Type
    Length
    Use
    Description
    ABCDE
    CHAR
    26
    Constants
    Alphabet (A,B,C,...)
    APPLI
    RAW
    2
    Obsolete
    BATCH
    CHAR
    1
    Background processing
    Program runs in the background
    BATZD
    CHAR
    1
    Obsolete
    BATZM
    CHAR
    1
    Obsolete
    BATZO
    CHAR
    1
    Obsolete
    BATZS
    CHAR
    1
    Obsolete
    BATZW
    CHAR
    1
    Obsolete
    BINPT
    CHAR
    1
    Batch input
    Program runs under batch input
    BREP4
    CHAR
    4
    Obsolete
    BSPLD
    CHAR
    1
    Obsolete
    CALLD
    CHAR
    1
    ABAP Program
    Call mode of ABAP program
    CALLR
    CHAR
    8
    Printing Lists
    ID for print dialog function
    CCURS
    DEC
    9
    Obsolete
    CCURT
    DEC
    9
    Obsolete
    CDATE
    DATS
    8
    Obsolete
    CFWAE
    CUKY
    5
    Internal
    CHWAE
    CUKY
    5
    Internal
    COLNO
    INT4
    10
    Creating Lists
    Current column in the list
    CPAGE
    INT4
    10
    List processing
    Current page number
    CPROG
    CHAR
    40
    ABAP Program
    External procedure call
    CTABL
    CHAR
    4
    Obsolete
    CTYPE
    CHAR
    1
    Obsolete
    CUCOL
    INT4
    10
    Screens
    Horizontal cursor position at PAI
    CUROW
    INT4
    10
    Screens
    Vertical cursor position at PAI
    DATAR
    CHAR
    1
    Screens
    Displays user input
    DATLO
    DATS
    8
    Date and time
    Local date of user
    DATUM
    DATS
    8
    Date and time
    Current (application server) date
    DAYST
    CHAR
    1
    Date and time
    Daylight saving time flag
    DBCNT
    INT4
    10
    Database accesses
    Number of processed table rows
    DBNAM
    CHAR
    20
    ABAP Program
    Linked logical database
    DBSYS
    CHAR
    10
    R/3 System
    Name of central database system
    DCSYS
    CHAR
    4
    Obsolete
    DEBUG
    CHAR
    1
    Internal
    DSNAM
    CHAR
    8
    Internal
    DYNGR
    CHAR
    4
    ABAP Program
    Screen group of current screen
    DYNNR
    CHAR
    4
    ABAP Program
    Number of current screen
    ENTRY
    CHAR
    72
    Internal
    FDAYW
    INT1
    3
    Date and time
    Factory calendar weekday
    FDPOS
    INT4
    10
    Character strings
    Offset in character strings
    FFILE
    CHAR
    8
    Internal
    FLENG
    INT4
    10
    Internal
    FMKEY
    CHAR
    3
    Obsolete
    FODEC
    INT4
    10
    Internal
    FOLEN
    INT4
    10
    Internal
    FTYPE
    CHAR
    1
    Internal
    GROUP
    CHAR
    1
    Internal
    HOST
    CHAR
    8
    R/3 System
    Name of application server
    INDEX
    INT4
    10
    Loops
    Current loop pass
    INPUT
    CHAR
    1
    Internal
    LANGU
    LANG
    1
    R/3 System
    Current language
    LDBPG
    CHAR
    40
    ABAP Program
    Program of logical database
    LILLI
    INT4
    10
    List processing
    Selected list row
    LINCT
    INT4
    10
    Creating Lists
    Page length of list
    LINNO
    INT4
    10
    Creating Lists
    Current row
    LINSZ
    INT4
    10
    Creating Lists
    Column width of list
    LISEL
    CHAR
    255
    List processing
    Content of selected row
    LISTI
    INT4
    10
    List processing
    Index of selected list
    LOCDB
    CHAR
    1
    Obsolete
    LOCOP
    CHAR
    1
    Obsolete
    LOOPC
    INT4
    10
    Screens
    Number of rows visible in table
    LPASS
    CHAR
    4
    Internal
    LSIND
    INT4
    10
    List processing
    Index of detail list
    LSTAT
    CHAR
    16
    List processing
    ID for list levels
    MACDB
    CHAR
    4
    Obsolete
    MACOL
    INT4
    10
    Printing Lists
    Columns from SET MARGIN statement
    MANDT
    CLNT
    3
    R/3 System
    Client number from logon
    MARKY
    CHAR
    1
    Obsolete
    MAROW
    INT4
    10
    Printing Lists
    Rows from SET MARGIN statement
    MODNO
    CHAR
    1
    R/3 System
    Index of external modes
    MSGID
    CHAR
    20
    Messages
    Message class
    MSGLI
    CHAR
    60
    Messages
    Message line
    MSGNO
    NUMC
    3
    Messages
    Message number
    MSGTY
    CHAR
    1
    Messages
    Message type
    MSGV1
    CHAR
    50
    Messages
    Message variable
    MSGV2
    CHAR
    50
    Messages
    Message variable
    MSGV3
    CHAR
    50
    Messages
    Message variable
    MSGV4
    CHAR
    50
    Messages
    Message variable
    NEWPA
    CHAR
    1
    Internal
    NRPAG
    CHAR
    1
    Internal
    ONCOM
    CHAR
    1
    Internal
    OPSYS
    CHAR
    10
    R/3 System
    Operating system of application server
    PAART
    CHAR
    16
    Print parameters
    Print formatting
    PAGCT
    INT4
    10
    Obsolete
    PAGNO
    INT4
    10
    Creating Lists
    Current page:
    PAUTH
    NUMC
    2
    Internal
    PDEST
    CHAR
    4
    Print parameters
    Output device
    PEXPI
    NUMC
    1
    Print parameters
    Retention period
    PFKEY
    CHAR
    20
    Screens
    Current GUI status
    PLAYO
    CHAR
    5
    Internal
    PLAYP
    CHAR
    1
    Internal
    PLIST
    CHAR
    12
    Print parameters
    Name of spool request
    PNWPA
    CHAR
    1
    Internal
    PRABT
    CHAR
    12
    Print parameters
    Part of cover sheet
    PRBIG
    CHAR
    1
    Print parameters
    Selection cover page
    PRCOP
    NUMC
    3
    Print parameters
    Number of copies
    PRDSN
    CHAR
    6
    Print parameters
    Name of spool dataset
    PREFX
    CHAR
    3
    Obsolete
    PRI40
    CHAR
    1
    Internal
    PRIMM
    CHAR
    1
    Print parameters
    Print immediately
    PRINI
    NUMC
    1
    Internal
    PRLOG
    CHAR
    1
    Internal
    PRNEW
    CHAR
    1
    Print parameters
    New spool request
    PRREC
    CHAR
    12
    Print parameters
    Recipient
    PRREL
    CHAR
    1
    Print parameters
    Delete after print
    PRTXT
    CHAR
    68
    Print parameters
    Text for cover sheet
    REPI2
    CHAR
    40
    Internal
    REPID
    CHAR
    40
    ABAP Program
    Current main program
    RSTRT
    CHAR
    1
    Internal
    RTITL
    CHAR
    70
    Print parameters
    Title of printing program
    SAPRL
    CHAR
    4
    R/3 System
    Release status R/3 System
    SCOLS
    INT4
    10
    Screens
    Number of columns
    SFNAM
    CHAR
    30
    Obsolete
    SFOFF
    INT4
    10
    Internal
    SLSET
    CHAR
    14
    Selection screens
    Name of variant
    SPONO
    NUMC
    10
    Printing Lists
    Spool number
    SPONR
    NUMC
    10
    Obsolete
    SROWS
    INT4
    10
    Screens
    Number of rows
    STACO
    INT4
    10
    List processing
    First displayed column
    STARO
    INT4
    10
    List processing
    Uppermost displayed row
    STEPL
    INT4
    10
    Screens
    Index of current table row
    SUBCS
    CHAR
    1
    Internal
    SUBRC
    INT4
    10
    Return value
    Return value after ABAP statement
    SUBTY
    RAW
    1
    Internal
    SYSID
    CHAR
    8
    R/3 System
    Name of R/3 System
    TABID
    CHAR
    8
    Internal
    TABIX
    INT4
    10
    Internal Tables
    Current row index
    TCODE
    CHAR
    20
    ABAP Program
    Current transaction code
    TFDSN
    CHAR
    8
    Obsolete
    TFILL
    INT4
    10
    Internal Tables
    Current number of rows
    TIMLO
    TIMS
    6
    Date and time
    Local time of user
    TITLE
    CHAR
    70
    Screens
    Text in header line
    TLENG
    INT4
    10
    Internal Tables
    Row size
    TLOPC
    INT4
    10
    Internal
    TMAXL
    INT4
    10
    Obsolete
    TNAME
    CHAR
    30
    Obsolete
    TOCCU
    INT4
    10
    Obsolete
    TPAGI
    INT4
    10
    Obsolete
    TSTIS
    INT4
    10
    Internal
    TTABC
    INT4
    10
    Obsolete
    TTABI
    INT4
    10
    Obsolete
    TVAR0
    CHAR
    20
    Creating Lists
    Text variable for headers
    TVAR1
    CHAR
    20
    Creating Lists
    Text variable for headers
    TVAR2
    CHAR
    20
    Creating Lists
    Text variable for headers
    TVAR3
    CHAR
    20
    Creating Lists
    Text variable for headers
    TVAR4
    CHAR
    20
    Creating Lists
    Text variable for headers
    TVAR5
    CHAR
    20
    Creating Lists
    Text variable for headers
    TVAR6
    CHAR
    20
    Creating Lists
    Text variable for headers
    TVAR7
    CHAR
    20
    Creating Lists
    Text variable for headers
    TVAR8
    CHAR
    20
    Creating Lists
    Text variable for headers
    TVAR9
    CHAR
    20
    Creating Lists
    Text variable for headers
    TZONE
    INT4
    10
    Date and time
    Time difference to Greenwich Mean Time
    UCOMM
    CHAR
    70
    Screens
    Function code that triggered PAI
    ULINE
    CHAR
    255
    Constants
    Horizontal line with length 255
    UNAME
    CHAR
    12
    R/3 System
    Logon name of user
    UZEIT
    TIMS
    6
    Date and time
    Current (application server) time
    VLINE
    CHAR
    1
    Constants
    Vertical line
    WAERS
    CUKY
    5
    Obsolete
    WILLI
    INT4
    10
    Obsolete
    WINCO
    INT4
    10
    Obsolete
    WINDI
    INT4
    10
    Obsolete
    WINRO
    INT4
    10
    Obsolete
    WINSL
    CHAR
    79
    Obsolete
    WINX1
    INT4
    10
    Obsolete
    WINX2
    INT4
    10
    Obsolete
    WINY1
    INT4
    10
    Obsolete
    WINY2
    INT4
    10
    Obsolete
    WTITL
    CHAR
    1
    Creating Lists
    Flag for standard page header
    XCODE
    CHAR
    70
    Internal
    XFORM
    CHAR
    30
    Internal
    XPROG
    CHAR
    40
    Internal
    ZONLO
    CHAR
    6
    Date and time
    Time zone of user
    Key:
    The system field is set by the runtime environment. Its content can be evaluated in the ABAP program but not changed.
    The system field is set by the runtime environment. Its content can be changed in the ABAP program to influence the runtime environment.
    The system field must be set in the ABAP program. It can then be evaluated by the runtime environment or the program.
    The system field is only for internal use and must not be used in ABAP programs.
    The system field is obsolete and its content is not set. It cannot be used in ABAP programs.
                                                                                    Thematic Overview
    The following is a thematic summary of the system fields with notes on their use:
    System information
    ·        Information on the current R/3 System
    ·        Information on the user session
    ·        Date and time information
    ·        Information on the current ABAP program
    ·        Background processing
    ·        Batch input
    ABAP programming
    ·        Constants
    ·        Character strings
    ·        Loops
    ·        Internal Tables
    ·        Database accesses
    ·        Return value
    Screens
    ·        Screens
    ·        Selection screens
    ·        Lists
    ·        Messages
    Internal system fields
    Obsolete system fields
                                                                                    System Information
    Information on the Current R/3 System
    SY-DBSYS
    Central database system, for example INFORMIX, ORACLE
    SY-HOST
    Application server, for example HS0333, PAWDF087
    SY-OPSYS
    Operating system of application server, for example HP-UX, SINIX
    SY-SAPRL
    Release status of R/3 System, for example 30D, 46A
    SY-SYSID
    Name of R/3 System, for example B20, I47
    Information on the User Session
    SY-LANGU
    One-digit language key, for example D, E, F. Either logon language of user or set using the SET LOCALE LANGUAGE statement.
    SY-MANDT
    Client number the user logged on with, for example 000, 400.
    For database accesses with Open SQL, SY-MANDT is used as the first key field of the WHERE clause.
    SY-MODNO
    Indexes external modes. Zero in first mode. In new modes, opened using the Create Mode function or by calling a transaction using /o, it is raised by 1. If previous modes were deleted, the free numbers are used first. Modes opened using  CALL TRANSACTION … STARTING NEW TASK start back at 0.
    SY-UNAME
    Logon name of user, for example KELLERH, BC400-01.
    Date and Time Information
    The following system fields are always set automatically. If necessary, the GET TIME statement synchronizes the application server time with that of the database server and writes it to the system field SY-UZEIT. SY-DATUM and the system fields for the local time zone, that is SY-TIMLO, SY-DATLO, and SY-ZONLO are also reset.
    SY-DATLO
    Local date of user, for example 19981129, 19990628.
    SY-DATUM
    Current (application server) date, for example 19981130, 19990627.
    SY-DAYST
    During daylight saving time X, otherwise empty.
    SY-FDAYW
    Factory calendar weekday, Sunday 0 … Saturday 6.
    SY-TIMLO
    Local time of user, for example 154353, 225312.
    SY-TZONE
    Time difference to Greenwich Mean Time (UTC) in seconds, for example 3600, 10800.
    SY-UZEIT
    Current (application server) time, for example 164353, 215312.
    SY-ZONLO
    Time zone of user, for example CET, UTC.
    Information on the Current ABAP Program
    SY-CALLD
    SY-CALLD contains SPACE if the program is the first and only program in a call chain. SY_CALLD contains 'X' if the program is a called program in a call chain (see ABAP Calls Overview).
    ·        SY-CALLD is set to ‘X‘ in a program called using CALL TRANSACTION, CALL DIALOG, or SUBMIT … AND RETURN.
    ·        SY-CALLD is set to SPACE in a program called using LEAVE TO TRANSACTION, entering a transaction code on a screen, and processing batch input folders. 
    ·        With SUBMIT (without RETURN) SY-CALLD retains the previous value.
    SY-CPROG
    In externally called procedures, the name of the calling program, otherwise the name of the current program. If an externally called procedure calls another external procedure, SY-CPROG keeps the name of the first main program and is not given the name of the main program of the further caller.
    SY-DBNAM
    With executable programs this is the linked logical database.
    SY-DYNGR
    Screen group of current screen. You can assign several screens to a common screen group. You can use this, for example, to modify all of the screens in the group in a uniform way.
    SY-DYNNR
    Number of current screen During the selection screen processing, SY-DYNNR contains the screen number of the current selection screen. During list processing, SY-DYNNR contains the number of the container screen. While a subscreen is being processed, SY-DYNNR contains its screen number. This also applies to tabstrips.
    SY-LDBPG
    With executable programs, the database program of the linked logical database.
    SY-REPID
    Name of current ABAP program. With externally called procedures this is the name of the procedure’s main program.
    If SY-REPID was transferred to an external procedure as an actual parameter before Release 6.10, the formal parameter was not given the name of the caller, but the name of the procedure’s main program. SY-REID had to be transferred to an auxiliary variable before the call or you had to use SY-PROG.
    As of Release 6.10, SY-REPID is a separate constant that is no longer part of the structure SYST or SY. It can be transferred to external procedures directly.
    SY-TCODE
    Name of current transaction code.
    Background Processing
    SY-BATCH
    SY-BATCH is set to X in an ABAP program running in the background. Otherwise it is empty.
    Batch Input
    SY-BINPT
    SY-BINPT is set to X during processing of batch input folders and in ABAP programs called with CALL TRANSACTION USING. Otherwise it is empty.
    ·         OPTIONS FROM in the CALL TRANSACTION USING statement can set SY-BINPT to empty for the whole program execution, as well as at the end of the BDC data.
    ·         In CATT procedures, SY-BINPT is always empty.
                                                                                    ABAP Programming
    Constants
    SY-ABCDE
    Contains the Alphabet. Can be used to access individual letters independently of the codepage by specifying offset.
    SY-ULINE
    Contains a horizontal line with length 255. Can be used when creating the list.
    SY-VLINE
    Contains a vertical line (|). Can be used when creating the list
    Loops
    SY-INDEX
    SY-INDEX contains the number of loop passes in DO and WHILE loops, including the current loop pass.
    Character Strings
    SY-FDPOS
    Found location for operations with character-type fields.
    ·        If the operators CO, CN, CA, NA, CS, NS, CP, NP are used in comparisons, SY-FDPOS is assigned offset values depending on the comparison result.
    ·        SEARCH … FOR … sets SY-FDPOS to the offset of the found search string.
    Internal Tables
    SY-TABIX
    Current line in an internal table. With the following statements SY-TABIX is set for index tables. With hashed tables, SY-TABIX is not filled or it is set to 0.
    ·        APPEND sets SY-TABIX to the index of the last table row, that is the total number of entries in the target table.
    ·        COLLECT sets SY-TABIX to the index of the existing or appended table row. With hashed tables, SY-TABIX is set to 0.
    ·        LOOP AT sets SY-TABIX to the index of the current table row at the beginning of every loop pass. After leaving a loop, SY-TABIX is set to the value it had before entering the loop. With hashed tables, SY-TABIX is set to 0.
    ·        READ TABLE sets SY-TABIX to the index of the table row read. If no row is found with binary search while reading, SY-TABIX contains the index of the next-highest row or the total number of rows +1. If no row is found with linear search while reading, SY-TABIX is undefined.
    ·        SEARCH  0). Each time an interactive list event occurs, the system automatically increases SY-LSIND by 1. SY-LSIND can be changed in the ABAP program to navigate between detail lists. Changes to SY-LSIND are not taken into account until the end of the list event. Therefore, any manipulation of SY-LISND should be done using the last command of the processing block.
    SY-LSTAT
    ID for list levels within the program. SY-LSTAT can be filled with values during list creation in the ABAP program. The value valid when the list is completed is saved with the list. In the case of an interactive list event, SY-LSTAT is set to the value it was assigned during the creation of the list from which the event takes place. SY-LSTAT is no longer maintained and should therefore no longer be used.
    SY-STACO
    Number of the first displayed column of the list from which the event was triggered. Counting starts at 1.
    SY-STARO
    Number of the upper-most displayed row of the upper-most page of the list, from which the event was triggered. Counting begins at 1. This does not include the page header.
    Printing Lists
    When printing lists, the spool and runtime systems require certain internal information, which is available in the following system fields and is set during print activation.
    SY-CALLR
    Contains a value that displays where printing was started, for example NEW-PAGE for program-controlled printing or RSDBRUNT for printing from the selection screen.
    SY-PRDSN
    Contains the name of the spool file during printing.
    SY-SPONO
    Contains the name of the spool number during printing.
    SY-MAROW, SY-MACOL
    The SET MARGIN statement fills the system fields SY-MAROW and SY-MACOL, which determine the number of lines on the upper margin and the number of columns on the left margin when printing.
    Print Parameters
    The print parameters are transferred to the spool system by the runtime system in a structure of dictionary type PRI_PARAMS. Before this structure was used, its purpose was served by system fields. Today a subset of the PRI_PARAMS structure is still written to system fields with the same names when printing is activated. This information is redundant and should not be used.
    Messages
    If you execute the MESSAGE statement, the following system fields are set. If you execute the MESSAGE … RAISING statement in function modules and methods, these fields are also set in the calling program, if it handles the exception.
    SY-MSGID
    SY-MSGID contains the message ID.
    SY-MSGNO
    SY-MSGNO contains the message number.
    SY-MSGTY
    SY-MSGTY contains the message type.
    SY-MSGV1,…,SY-MSGV4
    SY-MSGV1 to SY-MSGV4 contain the field contents that are used for the message’s placeholders. 
    Special Actions that Fill Message Fields
    ·        If you request database locks using the ENQUEUE function module, the field SY-MSGV1 contains the name of the user who holds the lock, in the case of the FOREIGN_LOCK exception.
    ·        IN the case of CALL TRANSACTION or CALL DIALOG with the USING addition, a message displayed during the called screen sequence is returned in the fields SY-MSGID, SY-MSGTY, SY-MSGNO, SY-MSGV1, ... , SY-MSGV4.
    ·        During Remote Function Call (RFC), error messages are transferred from the remote system to the calling system and SY-MSGID, SY-MSGTY, SY-MSGNO,SY-MSGV1, SY-MSGV2, SY-MSGV3, SY-MSGV4 are set. If short dumps or type X messages occur, the system also sets the fields.
                                                                                    Internal System Fields
    Internal system fields are only for internal use in the ABAP runtime environment and are defined in the kernel. Under no circumstances must they be overwritten in ABAP programs and they should also not be read (processed).
    SY-CFWAE
    Undocumented
    SY-CHWAE
    Undocumented
    SY-DEBUG
    Undocumented
    SY-DSNAM
    Name of spool output file.

  • CRS on Redhat 5 auto-start problem

    Dear all
    Recently I tried to install Oracle 10gR2 on Redhat 5. I did research and took all the necessary actions to install it on Redhat. Everything went well, according to the documents and at the end of the installation, all the resources were up and running. However, after the install, only the VIP was up and ONS and GSD was in unknown format. When I stop the nodeapps and start it again, everything stars working. It seems that the problem is something to do with boot process. I tried to put some delay ( for OCR mount ) but still no luck. This is the result from crsd.log from node1 when node2 is down.. :
    2009-06-24 22:00:07.461: [ default][3594852768]0CRS Daemon Starting
    2009-06-24 22:00:07.461: [ CRSMAIN][3594852768]0Checking the OCR device
    2009-06-24 22:00:07.464: [ CRSMAIN][3594852768]0Connecting to the CSS Daemon
    2009-06-24 22:00:07.838: [ COMMCRS][1103116608]clsc_connect: (0x151f20d0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
    2009-06-24 22:00:07.838: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
    2009-06-24 22:00:07.838: [  CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
    2009-06-24 22:00:09.307: [ COMMCRS][1103116608]clsc_connect: (0x151f23b0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
    2009-06-24 22:00:09.307: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
    2009-06-24 22:00:09.307: [  CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
    2009-06-24 22:00:10.773: [ COMMCRS][1103116608]clsc_connect: (0x151f25c0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
    2009-06-24 22:00:10.773: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
    2009-06-24 22:00:10.774: [  CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
    2009-06-24 22:00:12.150: [ COMMCRS][1103116608]clsc_connect: (0x151f2880) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
    2009-06-24 22:00:12.150: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
    2009-06-24 22:00:12.150: [  CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
    2009-06-24 22:00:19.093: [    CRSD][3594852768]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
    2009-06-24 22:00:19.093: [    CRSD][3594852768]0Active Version and Software Version are same
    2009-06-24 22:00:19.093: [ CRSMAIN][3594852768]0Initializing OCR
    2009-06-24 22:00:19.098: [  OCRRAW][3594852768]proprioo: for disk 0 (/u02/oradata/orcl/OCRFile), id match (1), my id set (503252545,1028247821) total id sets (1), 1st set (503252545,1028247821), 2nd set (0,0) my votes (2), total votes (2)
    2009-06-24 22:00:19.128: [  OCRMAS][1228994880]th_master:12: I AM THE NEW OCR MASTER at incar 1. Node Number = 1
    2009-06-24 22:00:19.129: [  OCRRAW][1228994880]proprioo: for disk 0 (/u02/oradata/orcl/OCRFile), id match (1), my id set (503252545,1028247821) total id sets (1), 1st set (503252545,1028247821), 2nd set (0,0) my votes (2), total votes (2)
    2009-06-24 22:00:19.144: [    CRSD][3594852768]0ENV Logging level for Module: allcomp 0
    2009-06-24 22:00:19.144: [    CRSD][3594852768]0ENV Logging level for Module: default 0
    2009-06-24 22:00:19.145: [    CRSD][3594852768]0ENV Logging level for Module: COMMCRS 0
    2009-06-24 22:00:19.145: [    CRSD][3594852768]0ENV Logging level for Module: COMMNS 0
    2009-06-24 22:00:19.146: [    CRSD][3594852768]0ENV Logging level for Module: CRSUI 0
    2009-06-24 22:00:19.146: [    CRSD][3594852768]0ENV Logging level for Module: CRSCOMM 0
    2009-06-24 22:00:19.148: [    CRSD][3594852768]0ENV Logging level for Module: CRSRTI 0
    2009-06-24 22:00:19.148: [    CRSD][3594852768]0ENV Logging level for Module: CRSMAIN 0
    2009-06-24 22:00:19.149: [  OCRSRV][1249974592]th_select_handler: Failed to retrieve procctx from ht. constr = [363817168] retval lht [-27] Signal CV.
    2009-06-24 22:00:19.149: [    CRSD][3594852768]0ENV Logging level for Module: CRSPLACE 0
    2009-06-24 22:00:19.149: [    CRSD][3594852768]0ENV Logging level for Module: CRSAPP 0
    2009-06-24 22:00:19.150: [    CRSD][3594852768]0ENV Logging level for Module: CRSRES 0
    2009-06-24 22:00:19.150: [    CRSD][3594852768]0ENV Logging level for Module: CRSOCR 0
    2009-06-24 22:00:19.151: [    CRSD][3594852768]0ENV Logging level for Module: CRSTIMER 0
    2009-06-24 22:00:19.151: [    CRSD][3594852768]0ENV Logging level for Module: CRSEVT 0
    2009-06-24 22:00:19.152: [    CRSD][3594852768]0ENV Logging level for Module: CRSD 0
    2009-06-24 22:00:19.153: [    CRSD][3594852768]0ENV Logging level for Module: CLUCLS 0
    2009-06-24 22:00:19.154: [    CRSD][3594852768]0ENV Logging level for Module: OCRRAW 0
    2009-06-24 22:00:19.155: [    CRSD][3594852768]0ENV Logging level for Module: OCROSD 0
    2009-06-24 22:00:19.155: [    CRSD][3594852768]0ENV Logging level for Module: CSSCLNT 0
    2009-06-24 22:00:19.156: [    CRSD][3594852768]0ENV Logging level for Module: OCRAPI 0
    2009-06-24 22:00:19.157: [    CRSD][3594852768]0ENV Logging level for Module: OCRUTL 0
    2009-06-24 22:00:19.158: [    CRSD][3594852768]0ENV Logging level for Module: OCRMSG 0
    2009-06-24 22:00:19.159: [    CRSD][3594852768]0ENV Logging level for Module: OCRCLI 0
    2009-06-24 22:00:19.159: [    CRSD][3594852768]0ENV Logging level for Module: OCRCAC 0
    2009-06-24 22:00:19.160: [    CRSD][3594852768]0ENV Logging level for Module: OCRSRV 0
    2009-06-24 22:00:19.160: [    CRSD][3594852768]0ENV Logging level for Module: OCRMAS 0
    2009-06-24 22:00:19.161: [ CRSMAIN][3594852768]0Filename is /u01/app/crs/crs/init/rac1dr.pid
    [  clsdmt][1417812288]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1drDBG_CRSD))
    2009-06-24 22:00:19.506: [ CRSMAIN][3594852768]0Using Authorizer location: /u01/app/crs/crs/auth/
    2009-06-24 22:00:19.760: [ CRSMAIN][3594852768]0Initializing RTI
    2009-06-24 22:00:19.761: [CRSTIMER][1438792000]0Timer Thread Starting.
    2009-06-24 22:00:19.770: [  CRSRES][3594852768]0Parameter SECURITY = 1, running in USER Mode
    2009-06-24 22:00:19.770: [ CRSMAIN][3594852768]0Initializing EVMMgr
    2009-06-24 22:00:19.996: [ COMMCRS][1449281856]clsc_connect: (0x15b1dc20) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
    2009-06-24 22:00:21.860: [ CRSMAIN][3594852768]0CRSD locked during state recovery, please wait.
    2009-06-24 22:00:22.494: [ CRSMAIN][3594852768]0CRSD recovered, unlocked.
    2009-06-24 22:00:22.496: [ CRSMAIN][3594852768]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
    2009-06-24 22:00:22.604: [ CRSMAIN][3594852768]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
    2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=rac1dr-priv)(PORT=49896))
    2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0Starting Threads
    2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0CRS Daemon Started.
    2009-06-24 22:00:23.732: [  CRSRES][1554180416]0startRunnable: setting CLI values
    2009-06-24 22:00:23.821: [  CRSRES][1554180416]0Attempting to start `ora.rac2dr.vip` on member `rac1dr`
    2009-06-24 22:00:23.822: [  CRSRES][1543690560]0startRunnable: setting CLI values
    2009-06-24 22:00:23.935: [  CRSRES][1543690560]0Attempting to start `ora.rac1dr.vip` on member `rac1dr`
    2009-06-24 22:00:30.657: [  CRSRES][1554180416]0Start of `ora.rac2dr.vip` on member `rac1dr` succeeded.
    2009-06-24 22:00:30.705: [  CRSRES][1543690560]0Start of `ora.rac1dr.vip` on member `rac1dr` succeeded.
    2009-06-24 22:00:31.408: [  CRSRES][1554180416]0startRunnable: setting CLI values
    2009-06-24 22:00:31.410: [  CRSRES][1543690560]0startRunnable: setting CLI values
    2009-06-24 22:00:31.647: [  CRSRES][1554180416]0Attempting to start `ora.rac1dr.gsd` on member `rac1dr`
    2009-06-24 22:00:31.708: [  CRSRES][1543690560]0Attempting to start `ora.rac1dr.ons` on member `rac1dr`
    2009-06-24 22:00:32.538: [  CRSEVT][1554180416]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.rac1dr.gsd! (timeout=600)
    2009-06-24 22:00:32.538: [  CRSAPP][1554180416]0StartResource error for ora.rac1dr.gsd error code = -2
    2009-06-24 22:00:32.573: [  CRSEVT][1543690560]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.rac1dr.ons! (timeout=600)
    2009-06-24 22:00:32.573: [  CRSAPP][1543690560]0StartResource error for ora.rac1dr.ons error code = -2
    2009-06-24 22:00:32.737: [  CRSEVT][1554180416]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.rac1dr.gsd! (timeout=600)
    2009-06-24 22:00:32.737: [  CRSAPP][1554180416]0StopResource error for ora.rac1dr.gsd error code = -2
    2009-06-24 22:00:32.837: [  CRSEVT][1543690560]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.rac1dr.ons! (timeout=600)
    2009-06-24 22:00:32.837: [  CRSAPP][1543690560]0StopResource error for ora.rac1dr.ons error code = -2
    2009-06-24 22:00:32.873: [  CRSRES][1554180416]0X_OP_StopResourceFailed : Stop Resource failed
    (File: rti.cpp, line: 1698
    2009-06-24 22:00:32.873: [  CRSRES][1554180416][ALERT]0`ora.rac1dr.gsd` on member `rac1dr` has experienced an unrecoverable failure.
    2009-06-24 22:00:32.873: [  CRSRES][1554180416]0Human intervention required to resume its availability.
    2009-06-24 22:00:32.921: [  CRSRES][1543690560]0X_OP_StopResourceFailed : Stop Resource failed
    (File: rti.cpp, line: 1698
    2009-06-24 22:00:32.921: [  CRSRES][1543690560][ALERT]0`ora.rac1dr.ons` on member `rac1dr` has experienced an unrecoverable failure.
    2009-06-24 22:00:32.921: [  CRSRES][1543690560]0Human intervention required to resume its availability.
    Any help is highly appreciated.
    Kamy

    CRS on RHEL 5.5 auto-start problem
    hi all
    Recently I install RAC Oracle 10gR2 on Red hat RHEL 5.5. “Two node cluster, iscsi storage, ocfs2 mounted files & ASM ”
    I did research and took all the necessary actions to install it on Red hat. Everything went well, according to the documents and at the end of the installation, all the resources were up and running. However, after the install, only the VIP was up and ONS and GSD ,ASM and the other services was in unknown state. When I stop the CRS & start it –all again, everything stars working. Please friends I need to fix this problem because the cluster services and the client workstation are stopping when the servicers is relocated to node 1 after the server reboot because the CRS did not worked still on node and manual starting is taking time.
    This is the result from crsd.log from node1 when node is online .
    Name Type Target State Host
    ora....SM1.asm      application ONLINE UNKNOWN linux1
    ora....X1.lsnr      application ONLINE UNKNOWN linux1
    ora.linux1.gsd     application ONLINE UNKNOWN linux1
    ora.linux1.ons      application ONLINE UNKNOWN linux1
    ora.linux1.vip     application ONLINE ONLINE linux1
    ora....SM2.asm     application ONLINE ONLINE linux2
    ora....X2.lsnr      application ONLINE ONLINE linux2
    ora.linux2.gsd      application ONLINE ONLINE linux2
    ora.linux2.ons     application ONLINE ONLINE linux2
    ora.linux2.vip      application ONLINE ONLINE linux2
    ora.mutdb.db      application ONLINE ONLINE linux2
    ora....b1.inst      application ONLINE OFFLINE
    ora....b2.inst      application ONLINE ONLINE linux2
    ora...._taf.cs      application ONLINE ONLINE linux2
    ora....db1.srv      application ONLINE UNKNOWN linux1
    ora....db2.srv      application ONLINE ONLINE linux2
    ############################### CRS Log ON Node 1 ##################################
    2010-05-27 11:54:57.357: [ default][3741415840][ENTER]0
    Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2004, Oracle. All rights reserved
    2010-05-27 11:54:57.366: [ default][3741415840]0CRS Daemon Starting
    2010-05-27 11:54:57.366: [ CRSMAIN][3741415840]0Checking the OCR device
    2010-05-27 11:54:57.379: [ CRSMAIN][3741415840]0Connecting to the CSS Daemon
    2010-05-27 11:54:57.783: [ COMMCRS][1107867968]clsc_connect: (0x8481ce0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
    2010-05-27 11:54:57.783: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
    2010-05-27 11:54:57.783: [  CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
    2010-05-27 11:54:59.182: [ COMMCRS][1107867968]clsc_connect: (0x8481f60) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
    2010-05-27 11:54:59.182: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
    2010-05-27 11:54:59.182: [  CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
    2010-05-27 11:55:00.569: [ COMMCRS][1107867968]clsc_connect: (0x84821f0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
    2010-05-27 11:55:00.569: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
    2010-05-27 11:55:00.569: [  CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
    2010-05-27 11:55:01.954: [ COMMCRS][1107867968]clsc_connect: (0x84824b0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
    2010-05-27 11:55:01.954: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
    2010-05-27 11:55:01.954: [  CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
    2010-05-27 11:55:05.924: [    CRSD][3741415840]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
    2010-05-27 11:55:05.924: [    CRSD][3741415840]0Active Version and Software Version are same
    2010-05-27 11:55:05.924: [ CRSMAIN][3741415840]0Initializing OCR
    2010-05-27 11:55:05.937: [  OCRRAW][3741415840]proprioo: for disk 0 (/u02/OCR_1.dbf), id match (1), my id set (1273042630,1936275375) total id sets (1), 1st set (1273042630,1936275375), 2nd set (0,0) my votes (1), total votes (2)
    2010-05-27 11:55:05.938: [  OCRRAW][3741415840]proprioo: for disk 1 (/u03/OCR_2.dbf), id match (1), my id set (1273042630,1936275375) total id sets (1), 1st set (1273042630,1936275375), 2nd set (0,0) my votes (1), total votes (2)
    2010-05-27 11:55:05.981: [    CRSD][3741415840]0ENV Logging level for Module: allcomp 0
    2010-05-27 11:55:05.983: [    CRSD][3741415840]0ENV Logging level for Module: default 0
    2010-05-27 11:55:05.994: [    CRSD][3741415840]0ENV Logging level for Module: COMMCRS 0
    2010-05-27 11:55:05.996: [    CRSD][3741415840]0ENV Logging level for Module: COMMNS 0
    2010-05-27 11:55:05.999: [    CRSD][3741415840]0ENV Logging level for Module: CRSUI 0
    2010-05-27 11:55:06.001: [    CRSD][3741415840]0ENV Logging level for Module: CRSCOMM 0
    2010-05-27 11:55:06.003: [    CRSD][3741415840]0ENV Logging level for Module: CRSRTI 0
    2010-05-27 11:55:06.006: [    CRSD][3741415840]0ENV Logging level for Module: CRSMAIN 0
    2010-05-27 11:55:06.008: [    CRSD][3741415840]0ENV Logging level for Module: CRSPLACE 0
    2010-05-27 11:55:06.010: [    CRSD][3741415840]0ENV Logging level for Module: CRSAPP 0
    2010-05-27 11:55:06.012: [    CRSD][3741415840]0ENV Logging level for Module: CRSRES 0
    2010-05-27 11:55:06.015: [    CRSD][3741415840]0ENV Logging level for Module: CRSOCR 0
    2010-05-27 11:55:06.017: [    CRSD][3741415840]0ENV Logging level for Module: CRSTIMER 0
    2010-05-27 11:55:06.019: [  OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [148436880] retval lht [-27] Signal CV.
    2010-05-27 11:55:06.019: [    CRSD][3741415840]0ENV Logging level for Module: CRSEVT 0
    2010-05-27 11:55:06.022: [    CRSD][3741415840]0ENV Logging level for Module: CRSD 0
    2010-05-27 11:55:06.024: [    CRSD][3741415840]0ENV Logging level for Module: CLUCLS 0
    2010-05-27 11:55:06.027: [    CRSD][3741415840]0ENV Logging level for Module: OCRRAW 0
    2010-05-27 11:55:06.029: [    CRSD][3741415840]0ENV Logging level for Module: OCROSD 0
    2010-05-27 11:55:06.032: [    CRSD][3741415840]0ENV Logging level for Module: CSSCLNT 0
    2010-05-27 11:55:06.034: [    CRSD][3741415840]0ENV Logging level for Module: OCRAPI 0
    2010-05-27 11:55:06.036: [    CRSD][3741415840]0ENV Logging level for Module: OCRUTL 0
    2010-05-27 11:55:06.039: [    CRSD][3741415840]0ENV Logging level for Module: OCRMSG 0
    2010-05-27 11:55:06.041: [    CRSD][3741415840]0ENV Logging level for Module: OCRCLI 0
    2010-05-27 11:55:06.043: [    CRSD][3741415840]0ENV Logging level for Module: OCRCAC 0
    2010-05-27 11:55:06.046: [    CRSD][3741415840]0ENV Logging level for Module: OCRSRV 0
    2010-05-27 11:55:06.048: [    CRSD][3741415840]0ENV Logging level for Module: OCRMAS 0
    2010-05-27 11:55:06.048: [ CRSMAIN][3741415840]0Filename is /u01/app/crs/crs/init/linux1.pid
    [  clsdmt][1401583936]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=linux1DBG_CRSD))
    2010-05-27 11:55:06.119: [  OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149741888] retval lht [-27] Signal CV.
    2010-05-27 11:55:07.002: [ CRSMAIN][3741415840]0Using Authorizer location: /u01/app/crs/crs/auth/
    2010-05-27 11:55:07.008: [  OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149755728] retval lht [-27] Signal CV.
    2010-05-27 11:55:07.230: [  OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149740416] retval lht [-27] Signal CV.
    2010-05-27 11:55:07.380: [ CRSMAIN][3741415840]0Initializing RTI
    2010-05-27 11:55:07.380: [CRSTIMER][1422563648]0Timer Thread Starting.
    2010-05-27 11:55:07.386: [  CRSRES][3741415840]0Parameter SECURITY = 1, running in USER Mode
    2010-05-27 11:55:07.386: [ CRSMAIN][3741415840]0Initializing EVMMgr
    2010-05-27 11:55:07.453: [  OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150974816] retval lht [-27] Signal CV.
    2010-05-27 11:55:07.474: [  OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150975552] retval lht [-27] Signal CV.
    2010-05-27 11:55:07.485: [  OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150988032] retval lht [-27] Signal CV.
    2010-05-27 11:55:07.723: [  OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150998720] retval lht [-27] Signal CV.
    2010-05-27 11:55:07.734: [ CRSMAIN][3741415840]0CRSD locked during state recovery, please wait.
    2010-05-27 11:55:07.737: [  OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150997792] retval lht [-27] Signal CV.
    2010-05-27 11:55:07.923: [  OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [151007072] retval lht [-27] Signal CV.
    2010-05-27 11:55:08.032: [ CRSMAIN][3741415840]0CRSD recovered, unlocked.
    2010-05-27 11:55:08.032: [ CRSMAIN][3741415840]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
    2010-05-27 11:55:08.051: [ CRSMAIN][3741415840]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
    2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=linux1-priv)(PORT=49896))
    2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0Starting Threads
    2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0CRS Daemon Started.
    2010-05-27 11:55:08.204: [  CRSRES][1527462208]0StopResource: setting CLI values
    2010-05-27 11:55:08.220: [  CRSRES][1527462208]0Attempting to stop `ora.linux1.vip` on member `linux2`
    2010-05-27 11:55:08.515: [  CRSRES][1527462208]0Stop of `ora.linux1.vip` on member `linux2` succeeded.
    2010-05-27 11:55:08.529: [  CRSRES][1527462208]0startRunnable: setting CLI values
    2010-05-27 11:55:08.529: [  CRSRES][1527462208]0Attempting to start `ora.linux1.vip` on member `linux1`
    2010-05-27 11:55:08.686: [  OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154566384] retval lht [-27] Signal CV.
    2010-05-27 11:55:14.000: [  CRSRES][1527462208]0Start of `ora.linux1.vip` on member `linux1` succeeded.
    2010-05-27 11:55:14.231: [  CRSRES][1527462208]0startRunnable: setting CLI values
    2010-05-27 11:55:14.272: [  CRSRES][1527462208]0Attempting to start `ora.linux1.LISTENER_LINUX1.lsnr` on member `linux1`
    2010-05-27 11:55:14.426: [  CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.linux1.LISTENER_LINUX1.lsnr! (timeout=600)
    2010-05-27 11:55:14.426: [  CRSAPP][1527462208]0StartResource error for ora.linux1.LISTENER_LINUX1.lsnr error code = -2
    2010-05-27 11:55:14.489: [  CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.linux1.LISTENER_LINUX1.lsnr! (timeout=600)
    2010-05-27 11:55:14.489: [  CRSAPP][1527462208]0StopResource error for ora.linux1.LISTENER_LINUX1.lsnr error code = -2
    2010-05-27 11:55:14.495: [  CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
    (File: rti.cpp, line: 1698
    2010-05-27 11:55:14.495: [  CRSRES][1527462208][ALERT]0`ora.linux1.LISTENER_LINUX1.lsnr` on member `linux1` has experienced an unrecoverable failure.
    2010-05-27 11:55:14.495: [  CRSRES][1527462208]0Human intervention required to resume its availability.
    2010-05-27 11:55:14.628: [  CRSRES][1527462208]0startRunnable: setting CLI values
    2010-05-27 11:55:14.698: [  CRSRES][1527462208]0Attempting to start `ora.linux1.ASM1.asm` on member `linux1`
    2010-05-27 11:55:14.836: [  CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.linux1.ASM1.asm! (timeout=600)
    2010-05-27 11:55:14.836: [  CRSAPP][1527462208]0StartResource error for ora.linux1.ASM1.asm error code = -2
    2010-05-27 11:55:14.875: [  CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.linux1.ASM1.asm! (timeout=600)
    2010-05-27 11:55:14.875: [  CRSAPP][1527462208]0StopResource error for ora.linux1.ASM1.asm error code = -2
    2010-05-27 11:55:14.881: [  CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
    (File: rti.cpp, line: 1698
    2010-05-27 11:55:14.881: [  CRSRES][1527462208][ALERT]0`ora.linux1.ASM1.asm` on member `linux1` has experienced an unrecoverable failure.
    2010-05-27 11:55:14.881: [  CRSRES][1527462208]0Human intervention required to resume its availability.
    2010-05-27 11:55:15.051: [  CRSRES][1527462208]0CRS-1028: Dependency analysis failed because of:
    'Resource in UNKNOWN state: ora.linux1.ASM1.asm'
    2010-05-27 11:55:15.185: [  CRSRES][1527462208]0startRunnable: setting CLI values
    2010-05-27 11:55:15.237: [  CRSRES][1537952064]0startRunnable: setting CLI values
    2010-05-27 11:55:15.306: [  CRSRES][1558931776]0startRunnable: setting CLI values
    2010-05-27 11:55:15.339: [  CRSRES][1527462208]0Attempting to start `ora.linux1.gsd` on member `linux1`
    2010-05-27 11:55:15.397: [  CRSRES][1537952064]0Attempting to start `ora.linux1.ons` on member `linux1`
    2010-05-27 11:55:15.407: [  CRSRES][1558931776]0Attempting to start `ora.mutdb.mutdb_taf.mutdb1.srv` on member `linux1`
    2010-05-27 11:55:15.789: [  CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.linux1.gsd! (timeout=600)
    2010-05-27 11:55:15.789: [  CRSAPP][1527462208]0StartResource error for ora.linux1.gsd error code = -2
    2010-05-27 11:55:15.808: [  CRSEVT][1537952064]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.linux1.ons! (timeout=600)
    2010-05-27 11:55:15.808: [  CRSAPP][1537952064]0StartResource error for ora.linux1.ons error code = -2
    2010-05-27 11:55:15.812: [  CRSEVT][1558931776]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.mutdb.mutdb_taf.mutdb1.srv! (timeout=600)
    2010-05-27 11:55:15.812: [  CRSAPP][1558931776]0StartResource error for ora.mutdb.mutdb_taf.mutdb1.srv error code = -2
    2010-05-27 11:55:15.838: [  CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.linux1.gsd! (timeout=600)
    2010-05-27 11:55:15.838: [  CRSAPP][1527462208]0StopResource error for ora.linux1.gsd error code = -2
    2010-05-27 11:55:15.844: [  CRSEVT][1537952064]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.linux1.ons! (timeout=600)
    2010-05-27 11:55:15.845: [  CRSAPP][1537952064]0StopResource error for ora.linux1.ons error code = -2
    2010-05-27 11:55:15.849: [  CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
    (File: rti.cpp, line: 1698
    2010-05-27 11:55:15.849: [  CRSRES][1527462208][ALERT]0`ora.linux1.gsd` on member `linux1` has experienced an unrecoverable failure.
    2010-05-27 11:55:15.849: [  CRSRES][1527462208]0Human intervention required to resume its availability.
    2010-05-27 11:55:15.859: [  CRSEVT][1558931776]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.mutdb.mutdb_taf.mutdb1.srv! (timeout=600)
    2010-05-27 11:55:15.860: [  CRSAPP][1558931776]0StopResource error for ora.mutdb.mutdb_taf.mutdb1.srv error code = -2
    2010-05-27 11:55:15.863: [  CRSRES][1537952064]0X_OP_StopResourceFailed : Stop Resource failed
    (File: rti.cpp, line: 1698
    2010-05-27 11:55:15.863: [  CRSRES][1537952064][ALERT]0`ora.linux1.ons` on member `linux1` has experienced an unrecoverable failure.
    2010-05-27 11:55:15.863: [  CRSRES][1537952064]0Human intervention required to resume its availability.
    2010-05-27 11:55:15.869: [  CRSRES][1558931776]0X_OP_StopResourceFailed : Stop Resource failed
    (File: rti.cpp, line: 1698
    2010-05-27 11:55:15.869: [  CRSRES][1558931776][ALERT]0`ora.mutdb.mutdb_taf.mutdb1.srv` on member `linux1` has experienced an unrecoverable failure.
    2010-05-27 11:55:15.869: [  CRSRES][1558931776]0Human intervention required to resume its availability.
    2010-05-27 11:55:20.450: [  OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154578560] retval lht [-27] Signal CV.
    2010-05-27 11:55:21.130: [  OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154578560] retval lht [-27] Signal CV.
    I tired this solution it was on website “but it did not work”
    下面是METALINK给出的解释:
    I have checked the information provided. crsd is reporting timeouts when running the checking actions. The racgmain process on the other hand, executed by racgwrap, remain running so the number is increasing.This issue has been reported in Bug 7009245 ""RACGMAIN CHECK" PROCESS NOT TERMINATING", and drill down and determine the root cause this require to get a stack trace from racgmain process(es) as well as you should runOSWatcher with a specific parameters, finally the issue of Bug 7009245 has been fixed by the fix of Bug 6196746 (unpublished bug -- summary is "racgwrap spawns racgmain child process. crsd timeout kills racgwrap but bot racgmain")So please perform the following action plan that intend to solve the issue.
    .ACTION PLAN
    ============
    1. Stop CRS on this node.
    2. Make a copy of racgwrap located under $ORACLE_HOME/bin and $CRS_HOME/bin
    3. Edit the file racgwrap and modify the last 3 lines from:
    .$ORACLE_HOME/bin/racgmain "$@"
    status=$?
    exit $status
    .to:
    .# Line added to test fix for Bug 6196746
    exec $ORACLE_HOME/bin/racgmain "$@"
    .4. Restart CRS and make sure that all the resources are startes
    This should solve the issue. also if you are not able to stop CRS right now, you can try the
    solution without crs stop/start.
    BUT IT DID NOT WORK
    ###################################################3

  • On system start up safari boots up and shortly after chrome boots up. why? I do not want chrome to boot up.

    on system start up safari boots up and shortly after chrome boots up. why? I do not want chrome to boot up..  What do I need to do?

    It's likely that one of your login items is causing the problem. Select the Login Items tab in the Users & Groups pane of System Preferences. Delete any items that you don't recognize. If you're not sure which ones to delete, double-click each to test it.

  • I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to  OS X 10.9.5.  Soon after theupgrade the mail system started switching the senders address to another address, but same user name.  How do you fix this?

    I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to  OS X 10.9.5.  Soon after theupgrade the mail system started switching the senders address to another address, but same user name.  How do you fix this?

    Thanks for the reply,.  I went to the site provided and executed the directions but this did not solve the issue. 
    Even more details:
    If I send a message to the Jane Doe address from another account on this machine (all my family uses the same email services provider and each have accounts set up on this machine), when you open it, it shows Jane Doe then the <applejax.xx> address AND the picture associated with the Apple Jax account.
    So the problem shows up when the message is sent to this account from this machine, AND when it is sent from this machine from this account.  No other accounts on the machine are effected.
    I have sent and received email messages from the mail service provider's website, and everything is fine.

  • Auto Start IChat program at System Start?

    Is there a way to automatically start IChat when the system starts? IE: Auto Login so I don't have to "Manually" start it each time?

    NOTE for some.
    It is worth noting that on some (Slower) Macs that, as the Start Up procedure actually connects to the Network quite late in the order of things, you may have problems.
    The Mac will in fact start to launch apps listed in the Login Items before the whole Start Up procedure has finished.
    This can mean if iChat is the only item or high on the list in Login Items that it can not find the Network and Log In before Start Up has finished.
    You may have to delete iChat from it's position in the list as it is not drag-able and re-enter it to have it later in the order of things.
    4:32 PM Sunday; March 29, 2009

  • Ongoing System Freezing problems, won't Boot from CD, HELP!

    Three weeks ago, my system started freezing after about 20 minutes of use --completely stuck while not running anything more taxing than internet browser-- and then the infamous fans kick on and the thing sounds like its going to take off. I eliminate possible conflicts w/ peripherals with no improvement, back up my files and trot 100+ miles to the nearest Genius (which is questionable). They diagnose it as the power supply/logic board issue, replace both --the second time that they have been replaced-- and send me back home, smiling blissfully.
    Until I plug it in, and it does the same thing. I live with it for a week, then load it back up for another 200+ mile roundtrip back to the same Genius, who keeps it for a week, claims that he has run every test known to Apple and can't find anything wrong. His suggestion: new surge protector. So I make the 3rd trip to go pick it up, buy the heavy duty super charged surge protector, plug everything up, and ..... you guessed it. Same ol' same ol'.
    So torn between crying and cursing, I get on the phone and call apple support. After close to two hours on hold in the Que (I could have drove to the Apple Store in less time) in which I speak to a live person who transfers me to another who cuts me off as soon as they pick up the phone and I have to get back in the que to repeat the exercise in patience, I get a hold of someone that says, well it might be hardware or it might be software-- try running the hardware test first and if that doesn't give you an error, reformat your hard drive, reload the OS, and then your software and see if that doesn't fix it.
    So now, I really am about to cry... but I suck it up and start to do the deed. Except.... I can't get the hardware test or anything else to boot from the CD. I try my disk, I try my son's disk. Nada. Zip. Won't boot at all from the CD. One disk says "hold down the C key," one says "D key." Doesn't matter, neither works. It will restart but forget the CD.
    Here's the help part: what next? Is this an indication that its a software problem? Is there something else I can do? Or am I doomed to make another 200+ round trip to the Genius Bar? Frankly, I think I'm ready to drive in the other direction to the next closest Apple Store, but...
    I'm so tired and frustrated!! Out of the last 14 days, this <edited by host> has been in the service department for 9 days and I've logged 700+/- miles trying to get it fixed. Between the lost time cost, gas and repairs (the $800 for the most recent repair and the $1000+ the first time around that thankfully were on Apple), I could have bought a top of the line new Mac and still had $$$ left over for a nice dinner!
    PLEASE! Any suggestions?!

    Hi Stellaadora-
    A call to Customer Relations at 1-800-767-2775 may be useful. Be firm yet polite and explain the situation and have them open up a case number. This is not Apple Service,but more like the overseers. It may also be useful to research the Consumer Protection Laws in your state. Three attempts to repair it in MA and you get a new machine.
    My guess is that they will have you try someone else. I know I would.
    Certainly the store is not duplicating your 20 minutes of web-browsing. It could be something to do with networking. Have you tried disconnecting from the internet and doing something else for a while to see if it still locks up?
    Luck-
    -DaddyPaycheck

  • [SOLVED] Systemd - console-kit-log-system-start.service FAILED

    Hi!
    i'm using systemd, and i removed initscripts and sysvinit.
    I've now noticed this error, it seems that service failed to load.
    By the way, i can systemctl restart it, and then it will be active and running. So, where is the problem?  I found this, that seems to be my same problem, but it is 2 years old! https://bugzilla.redhat.com/show_bug.cgi?id=632714 .
    Any idea?
    thanks!
    Last edited by nierro (2012-07-31 18:59:21)

    Looking into the issue, i can't find a solution...
    so, here there are :
    systemctl status console-kit-log-system-start.service
    console-kit-log-system-start.service - Console System Startup Logging
    Loaded: loaded (/usr/lib/systemd/system/console-kit-log-system-start.service; static)
    Active: failed (Result: exit-code) since Tue, 03 Jul 2012 09:34:45 +0200; 1 day and 3h ago
    Process: 175 ExecStart=/usr/sbin/ck-log-system-start (code=exited, status=1/FAILURE)
    CGroup: name=systemd:/system/console-kit-log-system-start.service
    and
    journalctl -a | grep console-kit-log
    Jul 03 09:34:45 arch systemd[1]: console-kit-log-system-start.service: main process exited, code=exited, status=1
    Jul 03 09:34:45 arch systemd[1]: Unit console-kit-log-system-start.service entered failed state.
    Any idea?
    EDIT:as i said, i can restart it, without any sort of problem, so i guess the issue is related to the deps of this service (After=...). I left it untouched, never modified this service...
    Last edited by nierro (2012-07-04 12:11:10)

Maybe you are looking for

  • Cannot print from ANY application after upgrade to 10.4.8 !!!

    Hi all, as it is written in the subject. Up to yesterday, I had OS 10.3.9, everything ok, could print from any application. Then I moved to Tiger and to the last version (10.4.8). And today the "nice" surprise: either from Preview, Texshop, Word, any

  • How do I flip individual characters in a text frame.

    I have some outlined text, with tracking decreased so they overlap, and every second letter's size slightly different so the paths don't merge. I would like the 1st letter to be on top, without breaking it all into individual text frames, and i don't

  • Warnung !!!!!!!!!

    *W A R N U N G!!!!!!!* *Leopard-Installation auf G5 Dual 2 GHz PowerMac* Es gibt erhebliche Probleme bei der Installation, die zur vollständigen unwiederbringlichen Löschung des vorhandenen Systems führen. Folgendes passierte: Start des Installations

  • Global_db_name

    Hi just installed oracle 10g, and set the global name to databasename during installation. didnt provide a domain prefix. however, when i now query the select * from global_name it displays databasename.REGRESS.RDBMS.DEV.US.ORACLE.COM Is it of no ris

  • Unable to Download Adobe Flashplayer

    I am an owner of a 13 inch macbook. My computer said I needed to download adobe flash player in order to watch videos on certain websites, i.e. facebook. So, facebook gave me a link to the adobe page where it offered to let me download i clicked the