VB Script always in Pending status In CMC

HI,
I have VB script file which archives old reports into dated folders on a network drive.
When I schedule the script in CMC..its status is always pending...why the script is not running?
Help will be appriciated.
Thanks,
Jyothi

Please post your SDK development questions to the Developers forum

Similar Messages

Messages always in pending status

Any help would be great with the following issue, when external messages are sent the status from within the GroupWise 7.0.3 client by all end users shows the status as pending, the messages however are delivered successfully to the external source. The messages are going but the status always seems to show pending and does not seem to update. The server is running 7.0.3. Does anyone have any ideas about a resolution for this issue?

gmwnhs1,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Indexing Pending Status

Hello All ,
Indexing is always showing pending status for the document.
Need to specify any property for this?
Regards,
Art

Hi Art Tech ,
You can see the topic for Cache Monitor with the parameters:
http://help.sap.com/saphelp_nw04s/helpdata/en/70/795647ef46bb4185afc32920cee1a0/frameset.htm
You can see the topic for Content Management System with the parameters:
http://help.sap.com/saphelp_nw70/helpdata/en/1f/2df44eeebf8145b67b31f513a83fc5/frameset.htm
More information about Indexing Pending Status you can search in KM Administration Guide :
http://help.sap.com/saphelp_nw70/helpdata/en/ec/171e3e7181b60ae10000000a114084/frameset.htm
Regards,
Lubi

Child CPs are always in PENDING STATE.

Procedure parent_cp (errbuf out nocopy varchar2, retcode out nocopy varchar2) IS
ret number;
i number;
BEGIN
fnd_msg_pub.initialize;
BEGIN ---Block A
req_data := fnd_conc_global.request_data;
if (req_data is not null) then
i := to_number(req_data);
if (i < 5 ) then
errbuf := 'Done!';
retcode := 0 ;
return;
end if;
else
i := 1;
end if;
for j in 1 .. 4 loop
vRequestId(j) := fnd_request.submit_request('CZ', 'Child','Delete Localized Text - Child Number : ' ||TO_CHAR(vChildNo), NULL,TRUE, vChildMdlRange);
fnd_conc_global.set_req_globals(conc_status => 'PAUSED', request_data => to_char(vChildNo)) ;
IF (vRequestId(j) = 0 ) THEN
errbuf := fnd_Message.get;
retcode := 2;
ELSE
errbuf := 'Sub-Request submitted!';
retcode := 0 ;
END IF;
END LOOP;
END;
BEGIN ---block B
For j in vRequestId.FIRST..vRequestId.LAST LOOP
fnd_file.put_line(fnd_file.log,' reuest' || vRequestId(j));
vrequeststatus := fnd_concurrent.get_request_status(vRequestId(j),
NULL,
NULL,
phase,
status,
dev_phase ,
dev_status ,
message );
WHILE (dev_phase != 'COMPLETE') LOOP
fnd_file.put_line(fnd_file.log,' while loop' || vRequestId(j));
vrequeststatus := fnd_concurrent.wait_for_request(vRequestId(j),
60,
10,
phase ,
status ,
dev_phase ,
dev_status ,
message );
END LOOP;
END LOOP;
dbms_output.put_line(' Block after submitting Child CP ');
END;
END parent_cp;
The above procedure was the Parent CP. Here the problem is in fnd_request.submit_request('CZ', 'Child','Delete Localized Text - Child Number : ' ||TO_CHAR(vChildNo), NULL,TRUE, vChildMdlRange); i have given sub_request as True and used fnd_conc_global.set_req_globals(conc_status => 'PAUSED', request_data => to_char(vChildNo)) ; to make parent CP to pause it.
It submits 4 child CPs as expected but the phase as INACTIVE and status NO MANAGER and PARENT CP was always in running state.
If i make sub_request parameter of fnd_request.sub_request to FALSE . It submits 4 child CPs as expected with the phase as PENDING and status NORMAL and PARENT CP was always in running state. But child cps are never changing the Phase to RUNNING. It is always in PENDING STATE.
Please suggest how to use fnd_conc_global.set_req_globals and fnd_concurrent.wait_for_request together.

Pl do not post duplicates - Parent Concurrent Program executes rest of the logic before PAUSED STATE.

I want to cancel all pending status in my payment

I want to cancel all pending status in my payment

please contact Skype customer service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Po Requisition workflow pending status issue

Hi
We have updated some quantity from 200 to 250 for a requisition line and sent for approval,at this time the user who updated the qty did not have the email address in oracle user name.So requistion status is always showing as pending.We have updated the oracle User with email address and ran Sync WF local tables concurrent program.
But we still could see requisition line in pending status.
Could anyone please tell me how to restart the requistion or any other solution to solve the issue.
Our apps version is 11.5.10.2
Thanks

Hi user;
please follow below and see its helpful:
Stuck POAPPRV Workflow Records At The Email PO Process Activity [ID 417722.1]
View Approval Workflow Hangs With No Error for Approved Purchase Orders and Requisitions [ID 413272.1]
APPROVE PO, WORKFLOW PROCESS, PROCESS HANGS [ID 1056081.6]
Workflow Is Not Completing For PO Supplier Change [ID 554024.1]
Regard
Helios

URGENT!pls hlpDAC Full Load always in 'Running' status at a particular task

Hi Friends,
I started a full load yesterday.There are totally 257 tasks.The load went fine without issues till 248th task.But while executing 249th task(Load into Activity Fact),it is always in 'Running' status and is not getting completed even after executing for 2 hours. I checked in the informatica workflow monitor and found that the workflow is in 'running' state and is not getting completed. When right-clicked the session and selected run properties,I can see that 0 rows are inserted into the target table.So I manually tried to stop the workflow.Even after that the task is always in 'Stopping' status and is not getting stopped.Then I manually aborted the workflow.
Below is the session log file.Could you please check and let me know.
Regards,
Vijay
Edited by: vijayobi on Jul 22, 2011 4:26 AM

Hi Friends,
We executed a Full-Load again on Saturday i.e 23rd July 2011.This time we allowed the task 'Load into Activity Fact_CUSTOM' to execute without stopping it manully like we did in the previous data load.It got executed for 3 hours and 45 minutes and then 'Failed' giving the following error ORA-01652(unable to extend temp segment by string in tablespace string).This task got executed successfully in our dev environment.Below is what we found in the sessio .log file and help us resolve this issue.Please revert back as soon as possible as we have this issue in our prod environment.
2011-07-23 14:56:07 : ERROR : (8128 | LKPDP_25:READER_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : RR_4035 : SQL Error [
ORA-01652: unable to extend temp segment by 128 in tablespace TEMP
Database driver error...
Function Name : Execute
SQL Stmt : SELECT distinct LOOKUP_TABLE.ROW_WID AS ROW_WID, LOOKUP_TABLE.GEO_WID AS GEO_WID, LOOKUP_TABLE.INTEGRATION_ID AS INTEGRATION_ID, LOOKUP_TABLE.DATASOURCE_NUM_ID AS DATASOURCE_NUM_ID, LOOKUP_TABLE.EFFECTIVE_FROM_DT AS EFFECTIVE_FROM_DT, LOOKUP_TABLE.EFFECTIVE_TO_DT AS EFFECTIVE_TO_DT FROM W_PARTY_D LOOKUP_TABLE,W_ACTIVITY_FS LEFT OUTER JOIN W_CUSTOMER_ACCOUNT_DON (W_ACTIVITY_FS.CUSTOMER_ACCOUNT_ID=W_CUSTOMER_ACCOUNT_D.INTEGRATION_IDAND W_ACTIVITY_FS.DATASOURCE_NUM_ID=W_CUSTOMER_ACCOUNT_D.DATASOURCE_NUM_ID)WHERECOALESCE(W_ACTIVITY_FS.CUSTOMER_ID,W_CUSTOMER_ACCOUNT_D.PARTY_ID)=LOOKUP_TABLE.INTEGRATION_IDAND W_ACTIVITY_FS.DATASOURCE_NUM_ID=LOOKUP_TABLE.DATASOURCE_NUM_IDAND COALESCE(W_ACTIVITY_FS.PLANNED_START_DT,W_ACTIVITY_FS.CREATED_DT) >= LOOKUP_TABLE.EFFECTIVE_FROM_DT AND COALESCE(W_ACTIVITY_FS.PLANNED_START_DT,W_ACTIVITY_FS.CREATED_DT) < LOOKUP_TABLE.EFFECTIVE_TO_DTORDER BY LOOKUP_TABLE.INTEGRATION_ID, LOOKUP_TABLE.DATASOURCE_NUM_ID, LOOKUP_TABLE.EFFECTIVE_FROM_DT, LOOKUP_TABLE.EFFECTIVE_TO_DT, LOOKUP_TABLE.ROW_WID, LOOKUP_TABLE.GEO_WID -- ORDER BY INTEGRATION_ID,DATASOURCE_NUM_ID,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,ROW_WID,GEO_WID
Oracle Fatal Error
Database driver error...
Function Name : Execute
SQL Stmt : SELECT distinct LOOKUP_TABLE.ROW_WID AS ROW_WID, LOOKUP_TABLE.GEO_WID AS GEO_WID, LOOKUP_TABLE.INTEGRATION_ID AS INTEGRATION_ID, LOOKUP_TABLE.DATASOURCE_NUM_ID AS DATASOURCE_NUM_ID, LOOKUP_TABLE.EFFECTIVE_FROM_DT AS EFFECTIVE_FROM_DT, LOOKUP_TABLE.EFFECTIVE_TO_DT AS EFFECTIVE_TO_DT FROM W_PARTY_D LOOKUP_TABLE,W_ACTIVITY_FS LEFT OUTER JOIN W_CUSTOMER_ACCOUNT_DON (W_ACTIVITY_FS.CUSTOMER_ACCOUNT_ID=W_CUSTOMER_ACCOUNT_D.INTEGRATION_IDAND W_ACTIVITY_FS.DATASOURCE_NUM_ID=W_CUSTOMER_ACCOUNT_D.DATASOURCE_NUM_ID)WHERECOALESCE(W_ACTIVITY_FS.CUSTOMER_ID,W_CUSTOMER_ACCOUNT_D.PARTY_ID)=LOOKUP_TABLE.INTEGRATION_IDAND W_ACTIVITY_FS.DATASOURCE_NUM_ID=LOOKUP_TABLE.DATASOURCE_NUM_IDAND COALESCE(W_ACTIVITY_FS.PLANNED_START_DT,W_ACTIVITY_FS.CREATED_DT) >= LOOKUP_TABLE.EFFECTIVE_FROM_DT AND COALESCE(W_ACTIVITY_FS.PLANNED_START_DT,W_ACTIVITY_FS.CREATED_DT) < LOOKUP_TABLE.EFFECTIVE_TO_DTORDER BY LOOKUP_TABLE.INTEGRATION_ID, LOOKUP_TABLE.DATASOURCE_NUM_ID, LOOKUP_TABLE.EFFECTIVE_FROM_DT, LOOKUP_TABLE.EFFECTIVE_TO_DT, LOOKUP_TABLE.ROW_WID, LOOKUP_TABLE.GEO_WID -- ORDER BY INTEGRATION_ID,DATASOURCE_NUM_ID,EFFECTIVE_FROM_DT,EFFECTIVE_TO_DT,ROW_WID,GEO_WID
Oracle Fatal Error].
2011-07-23 14:56:07 : ERROR : (8128 | LKPDP_25:READER_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : BLKR_16004 : ERROR: Prepare failed.
2011-07-23 14:56:07 : INFO : (8128 | WRITER_1_*_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : WRT_8333 : Rolling back all the targets due to fatal session error.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.LKP_W_PARTY_D_With_Geo_Wid], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.EXP_Decode_CustomerId], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.EXP_Decode_CustomerId], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.LKP_W_CUSTOMER_ACCOUNT_D_With_Party_ID], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.LKP_W_CUSTOMER_ACCOUNT_D_With_Party_ID], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.EXPTRANS], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [mplt_SIL_ActivityFact.EXPTRANS], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [FIL_ETL_PROC_WID], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [FIL_ETL_PROC_WID], and the session is terminating.
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [MPLT_Get_ETL_Proc_WID.Exp_Decide_Etl_Proc_Wid], and the session is terminating.
2011-07-23 14:56:07 : INFO : (8128 | WRITER_1_*_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : WRT_8325 : Final rollback executed for the target [W_ACTIVITY_F] at end of load
2011-07-23 14:56:07 : ERROR : (8128 | TRANSF_1_1_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : TM_6085 : A fatal error occurred at transformation [MPLT_Get_ETL_Proc_WID.Exp_Decide_Etl_Proc_Wid], and the session is terminating.
2011-07-23 14:56:07 : INFO : (8128 | MANAGER) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : PETL_24007 : Received request to stop session run. Attempting to stop worker threads.
2011-07-23 14:56:07 : INFO : (8128 | WRITER_1_*_1) : (IS | Oracle_BI_DW_Base_Integration_Service) : node01_MACAW : WRT_8035 : Load complete time: Sat Jul 23 14:56:07 2011
Thanks in advance.
Vinay

Database msdb cannot be opened due to inaccessible files or insufficient memory or disk space - in recovery pending status

came in this fine monday morning and it looks like developers were running some kind of trace that filled the primary DATA folder with about 80,000 5mb trace files. now that process has stopped and the logfiles have been cleaned up, but when attempting to connect to the server using the management console i get the error:
Database 'msdb' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. (.Net SqlClient Data Provider)
when i check the status it is in recovery pending mode. i have a backup from yesterday but im not sure if this database became corrupt before that backup or not because this process was ongoing over the weekend. the last timestamp on the msdb and log files is 7am this morning..
I am not sure how to proceed recovering the msdb database with limiting interruption to the users. any advice is extremely appreciated. this is sql server 2008. i can login via sqlcmd and see it is in recovery pending status:
1> select state_desc databasestatus_sysdtabase from
2> sys.databases where name ='msdb'
3> go
select state_desc databasestatus_sysdtabase from
sys.databases where name ='msdb'
databasestatus_sysdtabase
RECOVERY_PENDING
(1 rows affected)
1>

For someone experiencing a similar problem this answer is unacceptable. You're basically telling me to reboot the server to fix this. You vaguely mention using process explorer to find out who is using the file. Can you please provide
some more information on that? I have a similar problem and rebooting the server to fix it is not an option. This problem keeps reoccurring.
OS Error 32 means file has an open handle by someone else. If that is a user process then you can catch it via Process Explorer. If it's a kernel mode object then it's difficult to catch that and restart is the only choice.
http://sqlserver-help.com/2014/08/07/tips-and-tricks-os-error-32the-process-cannot-access-the-file-because-it-is-being-used-by-another-process/
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

"PENDING" Status in PROCESSING_STATUS_CODE field RCV_TRANSACTIONS_INTERFACE

Iam Working in R12 Instance,I created Purchase Order and it was apporved,now iam working in RCV_TRANSACTION. iam having data in rcv_headers_interface and rcv_transaction_interface as follows
rcv_headers_interface
INSERT INTO rcv_headers_interface
(header_interface_id,
GROUP_ID, processing_status_code, receipt_source_code,
transaction_type, auto_transact_code, test_flag,
last_update_date, last_updated_by, creation_date,
created_by, expected_receipt_date, comments,
validation_flag, transaction_date, org_id
VALUES (rcv_headers_interface_s.NEXTVAL,
rcv_interface_groups_s.NEXTVAL, 'BATCH', 'VENDOR',
'RECEIVE', NULL, 'N',
SYSDATE, fnd_global.user_id, SYSDATE,
fnd_global.user_id, SYSDATE, 'test',
'Y', SYSDATE, 204
rcv_transactions_interface
in below table i inserted two rows with different po_line_id,po_location_id,po_distribution_id
INSERT INTO rcv_transactions_interface
(interface_transaction_id,
header_interface_id, processing_status_code,
transaction_date, GROUP_ID, last_update_date,
last_updated_by, creation_date, created_by, transaction_type,
processing_mode_code, transaction_status_code, quantity,
to_organization_id, source_document_code, po_header_id,
po_line_id, po_line_location_id, po_distribution_id, comments
VALUES (rcv_transactions_interface_s.NEXTVAL,
rcv_headers_interface_s.CURRVAL, 'PENDING',
SYSDATE, rcv_interface_groups_s.CURRVAL, SYSDATE,
fnd_global.user_id, SYSDATE, fnd_global.user_id, 'RECIEVE',
'BATCH', 'PENDING', 1,
207, 'VENDOR', 81203,
102032, 193877, 199240, 'TEST'
and i run the "Receiving Transaction Processor",It completed with Normal Status,but in base tables data was not inserted,i got "ERROR" Status in PROCESSING_STATUS_CODE field of RCV_TRANSACTIONS_INTERFACE table and in rcv_interface_error iam getting "Error: Default Operating Unit has not been defined for the Org . (OU=)" in error_message field and "RCV_NOT_IN_ORG" in error_message_name field. and i assign responsibility level operating unit after that concurrent program completed normally and iam getting
"PENDING" Status in PROCESSING_STATUS_CODE field of RCV_TRANSACTIONS_INTERFACE table,why its is having pending status,weather i having to run any workflow,
Edited by: user8114609 on Apr 19, 2010 9:46 PM

Hi Jyoti,
Actually value is not set for "MO_SECURITY_PROFILE",so i tried to set the value at responisibility level,now in working in "vision operaions" opeating unit but in the list its is not coming,only vision "operations-supplier management" only coming.,weather its a setup program, please guide me this
Thank u for ur help
regards,
Viji

Payment pending status

Hi there,
I wanted to order a skype number but I have problem while processing to pay. Then I tried again and again by choosing new number but I didn't noticed that that it reserved the number and each time I failed, the payment status changed to pending. I only know that when I check my payment history. Now I can fix my problems and want to process to pay for only one number. And my question is if it will process to pay for 3 number for my account and will it charge me for 3 number? I don't need 3, I only need one. Can anyone show me how to delete my pending status.?
Thanks.

Hi, Bigtone13, and welcome to the Community,
Payment processing matters must be resolved by Skype Customer Service. Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
As you know you wish to contact Customer Service, skip past Step 2 of the instruction and proceed to Step 3, Continue Support Request. You may also skip past in Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started!
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Sending message while order get Pending Status

Hi,
We r using status profile for releasing order. If order fails the condition, it remains in the Pending Status. So we need to send these order to Sales Rep for review. How to send email to Sales Rep?

Hello
Create 'Z' Report and [send that report by mail|http://www.sap-img.com/fu016.htm]
Thanks & Regards
JP

OEM10g with pending status

Hi,
I've recreated EM, I've deleted all manually before, because drop or recreate command hangs in "Getting temp tablespace". It is 10.2.0.1.0 in Centos. I've deleted sysman user, and so on ... I've created EM again and it is ok, but when I go to the url, I enter with sys user and it shows "Pending Status".
I've searched in google, people speaks about tzregion in emd.properties, but it is ok ...
When I do emctl status dbconsole, it shows that it is running, and if I do the same for agent, it shows running and ready.
Can someone help me? Thanks beforehand.

Hi
What u can do login with ID who make approval
Then
Administrator > Approval procedure > Approval Status Report
Check Mark only Pending
So will display all transaction which are in Suspend Mode
Right click and choose cancel.
That will no further carry in pending stage...
as per me there is no way to delete pending records....
Thanks
Kevin

Script to know the status of existing FS

OS: SLES 10
Quite often we have FS unavilablilty issue.
FS become full, we need to request our Sys Admin group to increase the size.
Specially It is very painful when we are in the middle of soem thing.
Can I write script to know the status of existing FS in every 8 hours?
If yes, please give me the example. thanks
DN

Das N wrote:
OS: SLES 10
Quite often we have FS unavilablilty issue.
FS become full, we need to request our Sys Admin group to increase the size.
Specially It is very painful when we are in the middle of soem thing.
Can I write script to know the status of existing FS in every 8 hours?
If yes, please give me the example. thanks
DNThe command:
df -h /+dirInMyProblemFS+
Should do the trick for a one off.
Perhaps as a starter for ten the easiest (?) way is add the following line to your crontab:
15 4,12,20 * * * ( date ; /usr/bin/df -h /dirInMyProblemFS ) >> /tmp/FSwatch.log 2>&1Note: crontab -e changes your crontab :: (or if 'fails' try: export EDITOR=vi; crontab -e). Your crontab may of course be deny'd.
Rgds- bigdelboy

Async call gets stuck with pending status

Hi,
I am working on Tasklayer where need to invoke Async. call, the .bpel file has Invoke activity and below that it has pick activity with branches one for OnMessage and another is also OnMessage but, this is for fault. Now, when it invokes the Async. what i see in the instance is that the OnMessage activity gets stuck in Pending status, it doesn't proceed further. Kindly let me know if any one has faced similar issue.
Thanks & Regards,
Sanjay

Hi Sanjay,
you are saying that u r calling an asyc process.
So as an async process do not send the response back to parent through same port, you have to send the fault back to parent by invoking it(parent).
Here you can send the fault by using existing callback port otherwise you can define separate port for fault can send through that(you have to do it in WSDL).
So here for the first case no need to have the pick as u r getting both success and fault through same port. If you are going for separate one you have to have pick(one for success and other for faulted one)
So as Steven said you have to have a catch and invoke to send the fault back to parent.
Regards
PavanKumar.M

Need a bat script to check Server status remotly.

Hi,
I need bat script to check server status remotly (Ping) for multiple servers. It should generate a txt file for result.
Thanks.

Hi Ravi,
To ping multiple computers and generate report cia cmd, please refer to the script below, the "fnm" is computer name list and the "lnm" is the result, and you can save the script below as .bat file:
@echo off
set fnm=d:\test1\computers.txt
set lnm=d:\test1\ping.txt
if exist %fnm% goto Label1
echo.
echo Cannot find %fnm%
echo.
Pause
goto :eof
:Label1
echo PingTest STARTED on %date% at %time% > %lnm%
echo ================================================= >> %lnm%
echo.
for /f %%i in (%fnm%) do call :Sub %%i
echo.
echo ================================================= >> %lnm%
echo PingTest ENDED on %date% at %time% >> %lnm%
echo ... now exiting
goto :eof
:Sub
echo Testing %1
set state=alive
ping -n 1 %1
if errorlevel 1 set state=dead
echo %1 is %state% >> %lnm%
Refer to:
Explain the Batch script to ping multiple computers
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

VB Script always in Pending status In CMC

Similar Messages

Maybe you are looking for