VBScript message when opening URL's in new window.
Hi,
I've got a folio that uisng buttons to oopen up some external URL's. On some of them I get this error message
<%@ Language=VBScript %> <% ' Permanent redirection Response.Status = "301 Moved Permanently" Response.AddHeader "Location", "URL/" Response.End %>
And some work fine. I can't find any difference in the method of making the buttons or any consistency. Has any one else seen this message before?
Thanks
P
Has anybody found a solution to this?
We have the same problem when calling BW Reports.
Best regards,
Manuel Schaffner
Similar Messages
-
Open URL in a new window by closing the parent window
Hi Friends,
Is there any option to open URL in a new window by closing the parent window on a button click?
Already implemented the logics suggested in /people/mohammed.anzys/blog/2007/06/05/how-to-close-parent-window-in-webdynpro-applications , the thread ' URL in same window ' and the standard component WDR_TEST_EXIT_PLUG .But button is not triggerring any actions .plz help me ..............
Regards,
Radhikahi,
Do the following steps :
-> Make an Outbound Plug to the Window.
->Make the type of Outbound plug to Exit Type.
->Add URL of type String as a parameter to the outbound plug of Window.
->Do remember to add Component Name in the Properties Tab of View ( othervs Calling Outbound plug of window from view wont b possible ).
To open a new URL with closing the previous one write this Code in OnAction of Button : ( this Code can be get from Code Wizard too ).
DATA lo_zexit TYPE REF TO ig_zexit . <zexit is name of my Component>
lo_zexit = wd_this->get_zexit_ctr( ).
lo_zexit->fire_out_window_plg(
url = 'http://www.google.com' " string
I hope it helps.
Thanx. -
I have a project slide with buttons that open a URL that points to the .htm project file for another project in a new window with the current project to stay running. This causes the course to close completely in the LMS?
Hi,
try setting the button to open the url in a new window, that way the students will not have to "start over" when they need to go back to the module.
Just go into your button properties and next to your url, click the down arrow and select new. This will open the url in a new window. You can uncheck the continue playing move choice also to stop the movie so it doesnt continue to play when the user is visiting the webpage. -
Button is not opening URL in a new window
I have set the action and the URL and the NEW window ...but nothing opens in Preview or once published...can you help me?
See if the link below helps with that.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
APEX... Link to open URL in a new window
I have one of my interactive reports' column linked to a URL... so when my user click on the link it opens an associated webpage...
How can I make it to open in a new window...
ThanksHi,
I am trying to open my page as a popup without refreshing the parent window.
Here is what i have done
1. created a navigation bar entry for help
2. pointed the entry to a page in the application
3. opening the page as a popup with the following code in it.
javascript:window.open('&WORKSPACE_IMAGES.APEX_Reporting_User_Guide.pdf#&P0_PAGE_NAME.','popup1');
my help page opens as a popup, but also refreshes the parent window with a blank screen.
i also tried a few other options
javascript:window.open('&WORKSPACE_IMAGES.APEX_Reporting_User_Guide.pdf#&P0_PAGE_NAME.','popup1');void(0);
javascript:window.open('&WORKSPACE_IMAGES.APEX_Reporting_User_Guide.pdf#&P0_PAGE_NAME.','popup1');return false;
but none of these are helpful
Am I going wrong somewhere?
Thanks
MM -
Strange behavior when opening ESS iview in new window
Hi all,
I have a problem that i find very strange. In ESS, when opening a iView in a new window, for some users the link to the ITS service gets corrupt..
An example:
http://XXXXXX:54500/irj/servlet/prt/portal/prtroot/com.sap.portal.pagebuilder.IviewModeProxy?iview_id=pcd%3Aportal_content/com.ericsson.Ericsson/com.ericsson.ESS/com.ericsson.roles/com.ericsson.EP_ESS_HRMS/com.ericsson.personal_information/com.ericsson.previous_employers/com.sap.pct.ess.persinfo.pz28&iview_mode=defaultNavPathUpdate=false&buildTree=false
If you look at this link you can see that the & sign between iview_mode and NavPathUpdate is missing and makes the launch of the iview will fail.
If I use the same link for opening the page in a new window this error does not appear.
I have tried to change the parameters that are passed on but this does not help..
Any ideas?
Cheers,
MaxHas anybody found a solution to this?
We have the same problem when calling BW Reports.
Best regards,
Manuel Schaffner -
The customized link on CRM screen opens URL in a new window
Hello CRM gurus
I have customized the main CRM screen by adding a link on the left hand menu bar. When I click on this link, it starts the right URL but it is opening it in a seperate window.
I want that to be displayed on the right hand side of the same screen like other standard items does.
Is there any switch that I need to select to make this happen.
Any feedback or response will be highly appreciated.
Thanks
RamI was able to solve this issue with a friend's help.
Here is what I did
used tr.code spro
and then
selected
SAP Implementation Guide -> CRM -> Interaction Center WebClient -> Basic Functions -> Transaction Launcher -> Define URLs and parameters.
Hope this help others with same question.
Ram -
How to open URL iView in new window
HI,
We are not able to open the URL iView, which is assigned to page, in new window.
We set the property "Launch in New Window" to Launch in Separate Window but no use.
Please let us know the solution
ThanksHi Tatayya,
Remove the delta-link that you have done for that iview to the page. Change the necessary settings on the iview level (skip this part if you have already done). Then re-"delta-link"the iview to the page and test if it open in a different window.
Could also be your cache, so go ..navigate via Sys adm--> Navigation -> clear cache.
Hope that helps.
Ray -
I have been using Safari to access a gmail account for about a year. Today, I got a message that Safari is no longer supported by gmail and I need to upgrade. But I'm using the latest version of Safari. as far as I can tell. Anyone else getting this message? Is there a solution?
Also having issues with yahoo mail, as of today, when using Safari, but I'll post that on a separate forum question. I am mentioning it here because I wonder if the 2 are related. Gmail message appeared for first time today but I was getting this message from Yahoo earlier this year. I tried the work around found on this and Yahoo forum but could only get "basis" to work on Yahoo. .Today, even basic yahoo is not acting the same, reformating and showing commands in the text when I try to reply to an email. Annoying.Google seem to have decided in the last week or so that Safari 5.x, which is the newest Safari version available for Mac OS X 10.5 (Leopard) and 10.6 (Snow Leopard) is "not supported" any more, even though there are many reasons for staying with these OS X versions.
Try this (at your own risk, but it works for me), as it seems to remove the message by tricking Gmail into thinking your Safari version is newer:
-- Quit Safari
-- Locate the following file (location depends on your OS X version):
OS X 10.6 Snow Leopard:
/System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/Resources/Info.pl ist
OS X 10.5 Leopard and older:
/System/Library/Frameworks/WebKit.framework/Versions/A/Resources/Info.plist
-- Drag the file to your Mac's desktop to make a copy. Also make a safe copy somewhere else eg your Documents folder, as if you lose or mess up the file Safari will not launch at all. Having a backup browser is also recommended.
-- Double-click it to open it in TextEdit
-- Locate the CFBundleVersion value (the last line in the file that has numbers in it) and increment the second digit of it to the required version of Safari e.g. Safari 6 now seems to be the minimum version that Google support so change the second number from 5 to 6 (don't change anything else, only the change the second number). The value is different depending on your OS X version but as an example, for Snow Leopard 6534.59.10 becomes 6634.59.10
-- Drag the file back from the desktop to its original location, choose the option to replace the old version, and enter your password when prompted.
-- Run a permissions repair in Disk Utility to set the permissions in the file back to what they should be (not required, but good practice).
-- Launch Safari and test Gmail. -
Error message when trying to install a new windows 7
Hi I am using a pavillion dv6 2140ei. My hard disk crashed so I bought a new one and now when I try to install windows I get a message saying "windows cannot be installed to this disk. This computers hardware may not support bootingh to this disk. Ensure that the disks controller is enabled in the comupeters BIOS menu.
I was using windows 7 ultimate 32 bit, which is the same windows I am trying to install now.
Thank youMAGCINA wrote:
Hi I am using a pavillion dv6 2140ei. My hard disk crashed so I bought a new one and now when I try to install windows I get a message saying "windows cannot be installed to this disk. This computers hardware may not support bootingh to this disk. Ensure that the disks controller is enabled in the comupeters BIOS menu.
I was using windows 7 ultimate 32 bit, which is the same windows I am trying to install now.
Thank you
Hi,
You could disable AHCI in the BIOS settings (if possible). I have also noticed that some people used a live CD of Ubuntu or any other linux live environment and in Disk Utility or the default disk managament app set the drive/partition as bootable. Fdisk should also work.
http://tldp.org/HOWTO/Partition/fdisk_partitioning.html
The boot flag should be in your case(mine as well) on sda1 as the small partition for Windows.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"* -
??
When I try to open Adobe Photoshop CC 2014
I get an error message: Adobe Photoshop cannot run on this computer because
the version of Photoshop requires windows 7 or older.
The version of windows I am running is Windows 7 Home premier?
Mike Marks, V President
Top Quality Construction Services, Inc
e. [email protected]
o. 407.796.8133 | f. 321.422.5710 -
Captivate 7 Click box and bottons not able to open an URL on a new window
I inserted a button and a click box in CP7 to open an URL on a new window. The URL opens but in a New Tab. There is an issue that the URL cannot be opened on a NEW WINDOW, I am using IE and Chrome. Do you have any ideas about this issue and how to troubleshoot it? I tried with Safari and it works fine.
Thanks, Jorge - Adobe Captivate 7 user.Hi Jorge
It's my understanding that all you can do is to configure the link to open in a new "whatever". Whether you get the link opening in a tab or a window is left up to the browser and how the particular user has their browser configured. For example, I use Firefox and when I look at its settings here is what I see.
I'm guessing there must be a way to force a new window, because I do see new windows appear. But I think in those cases folks are doing it by using JavaScript.
Cheers... Rick -
Error message when opening a document "this document is being used by another user
error message when opening a document "this document is being used by another user, do you want to make a copy?
I select yes, then new message - word can not open this document.the document might be in use or it may not be an invalid document.
Any suggestions?Hello MrNeuf,
I would recommend releasing and renewing the IP lease on the affected computer. The following article provides further information and details the process of doing so.
Mac OS: How to release and renew a DHCP lease
http://support.apple.com/kb/TS1920
Cheers,
Allen -
I am trying to download new version of iTunes from App store having purchased it on my laptop. When I try to download on my iMac I get the following message:
Error message when I try to download new iTunes as follows: iPhoto 7.1.5 is already installed and was not purchased from the Mac App Store - and then I am asked if I want to buy it again. I don't understand the error message and I don't want to purchase the new version again.
Also, since upgrading to Lion my videos (from Sanyo Xacti camera) do not play on iTunes. I can only open photos.
Thank you.Make a back up of your Library. Now you can update without fear.
Regards
TD -
I am recieving an error message when I try to copy new files (images, documents) to mac from flash drive/SD card. The message is saying "operation cannot be completed because an item already exists with that name." They are brand new therefore not the same name? I cannot even put them in a brand new folder... How can I fix this?
Please help me!You don't need to recover the system.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press the space bar:
dot_clean -m
Switch to the Finder and drag the icon of the flash drive into the Terminal window. Some text will appear after what you entered. Press return.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear. Then quit Terminal and try the copy again.
Maybe you are looking for
-
Send email from j2me through servlet
Hi people, i hope you can help me because i am new in network programming. I am trying to send email from j2me to googlemail account I have 2 classes EmailMidlet (which has been tested with wireless Toolkit 2.5.2 and it works) and the second class is
-
HT204266 How do I see more than one issue of a magazine at a time in Newsstand on the iPad?
I can only see the most recent issue but I haven't read the last one (or the one before that, etc.). I want to see them for as long as it takes to read them.
-
Loop Page Style Sheet to set file name.
I am exporting pages to jpgs and pngs using a script that pulls the name from an applied style sheet. http://forums.adobe.com/message/5913479#5913479 the above works perfectly if I only want to specify one style sheet as the file name. the challenge
-
My iPhone 4 got stolen and it has apple protection care, will apple replace it?
My iPhone 4 got stolen and it has apple protection care, will apple replace it?
-
How to know current bandwidth to be able to increase or decrease reserved streaming units ?
Hi, how to know egress bandwidth by Azure Api to be able to increase reserved streaming unit if bandwidth reaches over 80%. Currently it is set to 1, but should be able to increase it when bandwidth is more than 160 mpbs(80% of available bandwidth wh