VDI 3.1 EA - Internal Error when assigning a user to a pool

Hello:
I'm hoping somebody can help point me in the right place to troubleshoot this. I'm using OpenLDAP and I've changed my LDAP filters so I can search for the users but when I select the user and click on the 'OK' button, it pukes out with an Internal Server Error and a stack trace that some Java exception threw.
I don't know what the problem is or what direction to even start looking...
-K

I figured out what my problem was. I needed to set my group filters for ldap. As soon as I set all of my group filters it stopped crashing on me. It's interesting that it crashed but basically if I had followed the direction it would have worked the first time. I stopped after I set the user filters.
I would post all of the filters I set but since they are specific to my LDAP setup they wouldn't do anybody else any good.
But understanding LDAP filters in general and then reading this page completely should keep others out of trouble.
http://wikis.sun.com/display/VDI3dot1/How+to+Edit+the+LDAP+Filters+and+Attributes
Thanks anyway!

Similar Messages

Error when assigning business partners to positions in org. mgmt.

Hello,
I've got the following problem. I want to assign business partners to a position in organisation management. When doing this, the following error occurs:
"Object cannot be assigned to object xxx in the period xx.xx.xxxx - xx.xx.xxxx"
(xxx is the position to which the business partner should be assigned)
The number of this error message is 5A368.
Diagnosis in the detailed description of this message:
"The object period of object '1st Level Support' is not within the relationship period 26.03.2007 - 31.12.9999."
I've changed the object period of the position "1st Level Support" to several other dates, but it did not solve the problem.
The described problem does not occur, when assigning an user to this position.
Can anybody help me with this problem? I'm using SolMan 4.0.
Thank you in advance!

Thanks for your answer so far. Unfortunately it's not possible for me to upgrade to SP11. So I tried to solve the problem the way you described. I double-clicked the position on the left, the desired position is shown in the main screen and I try to assign the business partner to the position. But the same error appears.
Are there any other possible solutions?
What are the consequences of assigning users to a position instead of business partners?

Error when assigning SID while uploading text in the info-object of the DSO

Hi
I have a scenario where I need to extract a char 60 field from R/3 in the DSO.
I have created the info-object which is char 60 which has the master data text activated.
In the DSO transformation I have mapped it to the R/3 field.
While activating the data in DSO its giving the error message
'Value '20 per action plan' (hex. '32302070657220616374696F6E20706C616E') of characteristic'
'Error when assigning SID: Action VAL_SID_CONVERT InfoObject ZRMSD '
How to overcome this issue.
Please advise.
Thanks in advance.

Change the InfoObject for this text so that it will allow lowercase letters. To do this, go into Change mode on the InfoObject, go to the General tab, check the Lowercase letters checkbox and activate the InfoObject. After this has been activated, you can then restart your process and this SID violation error should no longer be thrown for this.
If you don't want to do this, then you can use the TOUPPER formula in the Characteristic Routine, in the Transformation, to change the value of this field contents to uppercase. This can also be done by using an ABAP routine like this:
TRANSLATE column TO UPPER CASE.
Edited by: Dennis Scoville on Nov 3, 2009 9:55 AM

Internal error when accessing a table -

Hi,
The program which is running as background was running for last 1 year, last two days the RFC call in the program is dumping.
In DUMP its showing Internal error when accessing a table
Error : DBIF_RSQL_SQL_ERROR
I checed the size of the table its quite huge for the application.
So there is no issue with table.
Please advise what causes these sort of error.
System is ECC 6.0
With SQL server 8.0
Regards,
Thomas

These are the system log i got it from SM21. For this error logs are as below
Very High Priority error
Details Page 2 Line 9 System Log: Local Analysis of onsaprp1                  1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:43:09
DIA
009
300
AB
0
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Details
Recording at local and central time........................ 11.02.2011 15:43:09
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
1
SAPMSSY1
T
Transaction Problem
SABP
Further details for this message type
Module nam
Line
Error text
absapsql
0786
HandleRsqlErrors
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
abcdefghijklmnopqrstuvwxyz .. DBIF_RSQL_INTERNAL_ERROR
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
119
618840
l
Error (Module, Row)
AB
0
HandleRsqlErrors                                    absapsql0786
High Priority error
Details Page 2 Line 18 System Log: Local Analysis of onsaprp1                 1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:44:07
DIA
009
300
SMEN
BZ
Y
Unexpected return value 8 when calling up
Unexpected return value 8 when calling up
Details
Recording at local and central time........................ 11.02.2011 15:44:07
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
om-blr-l
1
SMEN
SAPLSMTR_NAVIGATION
K
SAP Web AS Problem
SBAC
Further details for this message type
Module nam
Line
Table Name
Field Name
dbrepolo
172
8
Documentation for system log message BZ Y :
When calling a function within the database interface, a return
value which cannot be processed by the calling function was
provided.
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
120
11160
h
Database Error (Non-SQL)
BZ
Y
8                                                   dbrepolo172
Edited by: Thomas Paul jr on Feb 14, 2011 6:36 AM
Edited by: Thomas Paul jr on Feb 14, 2011 6:38 AM

SM58 : Internal error when accessing a table

Hi there,
We have just upgraded from R/3 4.7 to ECC 6.0. After the upgarde we face many "Internal error when accessing a table" in sm58. Is there any table mapping mismatched happened during unicode conversions? How to check the details? Most of the errors are SWW_WI_EXECUTE_INTERNAL_RFC, SWW_WI_CREATE_VIA_EVENT_IBF and etc which are workflow modules.
can you help?
Thanks.
Regards,
Thava

Hi
Have u checked this thread?
problem in TRFC
Error while executing Workflow: User is locked.
/message/5804053#5804053 [original link is broken]
Regards
Sridhar Goli

Internal error when deploying a mapping

Helllo,
I am getting an ORA-00600 internal error when I deploy a mapping using the following case statement (case statement executes fine in SQLplus):
CASE WHEN (LINE_CANCEL_FLAG ='Y' OR PO_CANCEL_FLAG = 'Y')
THEN ('Y')
ELSE ('N')
END
If I comment out the "OR" section it deploys without errors:
CASE WHEN (LINE_CANCEL_FLAG ='Y' )
--OR PO_CANCEL_FLAG = 'Y')
THEN ('Y')
ELSE ('N')
END
What am I doing wrong?
(Oracle 9i Warehouse Builder Client 9.2.0.4.0
Oracle 9i Warehouse Builder Repository 9.2.0.2.0
Platform for Application Server: Windows 2003
Platform for database: HP Unix (Risc Processor) V11i)
Thanks

Hello again,
Please observe that I asked whether you pressed the Validate button in EXPRESSION BUILDER (the window that appears every time you click on the ellipsis ... in the property editor for every SQL or PL/SQL expression property), not whether you validated the mapping (as a whole). These are separate things.
The mapping can be validated OK with expression syntax errors, but the mapping PL/SQL code cannot be compiled / deployed.
Regards, Hans Henrik

Error"There was an internal error when submitting the form" URM Disposition

Hello
I get the following error - "*There was an internal error when submitting the form*" - when i allocate a Retention Disposition to a Retention Category.
Any Ideas how this can be solved?
Thank you

Not based on the minimal information provided.
Error messages in 11g, from a UI standpoint, are severely deficient. How about looking in the content server logs and posting some more information?

FM 10 - Serious Internal Error When Copying/Pasting

We regularly encounter a serious internal error when copying text from one FM doc to another. We also get the error (occasionally) when we run FrameScript. Does anyone know what could cause this? It appears to happen randomly (i.e. it doesn't appear to be tied to one particular .book or .fm file). We use FM 10, Windows 7, 64-bit OS, and have 4GB of RAM installed. Help please!

We have version 10.0.2.419. There is nothing out of the ordinary with the content except that it is typically in track text edits. We cannot reproduce the crash on demand. It seems to happen randomly and to some users more than others.

GR224 Report Painter: Internal error when converting a report

Hi
Using FAGL_RMIGR transaction I've trasferred report 8A3-0010 in a
custom library ZXX. The migration happened without error messages. I've
tryed then to run report FL3-0010 by GRR3 transaction but error message
GR224 appears
Report Painter: Internal error when converting a report
Message no. GR224
Diagnosis
During the internal compilation of a Report Painter report to a
Report Writer report, sets are generated. This caused an error in the
subprogramm GENERATE_ROW_MULTI. The return code was 7.
System Response
The report could not be generated and/or saved.
Procedure
Please call the SAP Hotline and send them this longtext as well as
detailed information describing the circumstances in which this
error
occured.
Please could you help me?
Thanks in advance
Giovanna Scamardella

HI,
SAPNET notes search with GR 224 brings some old (but maybe helpful) notes: 37611, 193392,137231, pls. check.
Best regards, Christian

Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER

Hi All,
We are getting the following error when activating an ODS:
Fiscal year variant not expected
Error when assigning SID: Action VAL_SID_CONVERT table 0FISCPER
Interestingly, we have two systems for two different phases, on the same BW 3.5 SP level and the corresponding source R/3 SP Levels. BEx reporting is turned on for both the ODSs.
On one system, the ODS get's activated without any issue and on the other, it get's errored out.
I have tried different things like Rebuiding Global Transfer Settings, comparing the data between the two systems, etc., but no use.
Any ideas/solutions?
Thanks,
- Shashi

Marc,
I have checked once and found all the data is correct. I will do that again.
When I tried RSRV checks on 0FISCPER and 0FISCVARNT, I am getting the following message:
0FISCVARNT is not a characteristic but an InfoObject of type TIM
Message no. RSRV209
Diagnosis
The value entered 0FISCVARNT must be the name of a characteristic. However, 0FISCVARNT is an InfoObject of type TIM.
The following values can be types:
CHA characteristic
KYF key figure
TIM time characteristic
UNI unit
DPA package
ATR attribute
MTA meta-InfoObject
Thanks,
- Shashi

Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE

Hi Experts
When I am trying to load the data into DSO the data is scheduling But DSO data is not Activated It Showing Error
messages in Log for request processing in Request tab of DSO Manage.
1.Error when assigning SID: Action VAL_SID_CONVERT table 0TYPE
2.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
3.Error when assigning SID: Action VAL_SID_CONVERT table ZCH_O_TYP
4.Value 'area' (hex. '61726561') of characteristic 0TYPE contains invalid characters
5.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE
6.Value '0000000000000000860452655_PDF_45U x 200' (hex. '30303030303030303030303030303030383630343532363535') of
characteristic ZVALUE contains invalid characters
7.Error when assigning SID: Action VAL_SID_CONVERT table ZVALUE_O .
8.Value '224053 sht 1.pdf##~##000000153363' (hex. '3232343035332073687420312E70646623237E232330303030') of
characteristic ZVALUE_O contains invalid characters.
9.Activation of M records from DataStore object ZCF_O02 terminated
I have tried adding the special character # with transaction rskc but nothing seems to change and
I still get the same error.
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
i am getting the above error, one of the expert suggested to implement this code but i am getting some errros when i execute this one please can anyone check this code and correct the errors it would be help ful to me.
Regards
Venu

Hi ,
Implement this code to resolve the issue.
You can use the sample code below to choose only the charachters to be allowed in for the field. Using that you can remove all special charachters and # symbols as required
DATA: T_ALL(100) type C,
T_VAR1(45) type C value 'ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopq',
T_VAR2(50) type C Value 'rstuvwxyz 0123456789 @#$%^&*()_-+=:;\/?',
temp(60) type c,
cnt type i,
length type i.
clear : cnt,temp,length.
break-point.
temp = SOURCE_FIELDS-TXZ01.
CONCATENATE T_VAR1 T_VAR2 into T_ALL.
cnt = 0.
length = STRLEN( temp ).
IF NOT temp CO T_ALL.
WHILE cnt < length.
IF NOT temp+cnt(1) CO T_ALL.
CLEAR: temp+cnt(1).
ENDIF.
cnt = cnt + 1.
ENDWHILE.
ENDIF.
translate temp to upper case.
RESULT = temp.
Regards,
Rahul.

Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT

Hello Team,
WE are facing the error"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BP_ACTIVIT" .Please see he below screen shot.
Every day the failure is for a different value and this is fixed with the manual activation of he DSO, with out any change .
Below are the steps we have tried:
1. The RSRV tests for the info objects were consistant. We have done he below rsrv tests:
a. Compare characterstic of P/Q table with X/Y tables.
b.SID values in X and Y tables.
2. We have changed the DSO setting from Parallel to Serialized Activation.
Also the format of the values are as per the designated type.
One more thing which i noticed is , the values for which the failure occurs , are new entries to the DSO, and they do no exists in the Change log table.
Please let us know , what else can be done to fix this issue.
Thanks in Advance,
Nikhil

HI Nikhil,
please go through the documents.
http://scn.sap.com/thread/1820047
http://scn.sap.com/message/14266151
http://scn.sap.com/thread/1520825
Regards,
Abdul rAwoof Syed.

Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER

Dear experts,
I'm getting this error when activating an DSO.
I'll try to explain when this error happens.
I have a DTP in Delta Mode between 2 DSO's.
The first time I run the DTP the DSO activates with no problems.
The next time I run the DTP and it gets data the activation of the DSO has the error: Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0FISCPER
I've googled it but I can't find a solution for this.
The first time I got this error I've deleted the DSO anda loaded the Data again and got no errors.
The next Delta that has Data gave error when activating the DSO.
Whan can be happening here?
Best Regards,
Rui Romba

So you want to say that data loaded successfully in DSO 1 and while activating data in DSO2 you are getting this error.
DSO1 feed data to DSO2 correct.
Please check if generate SID upon activation setting is checked in DSO1 or not.Because if its the issue with fiscal year period then it should have given the error at DSO1 itself provided that setting is maintained.
I just stumbled upon a document which addresses this issue and it seems the problem is with fiscal year variant.
Check out the document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0a5a670-13f6-2c10-179d-a35e50a208bf?quicklink=index&…
Regards,
AL
Message was edited by: Anshu Lilhori

Graphics tab in REBDBU: Internal error when implementing extension

Hello,
Seek your kind help please.
I have entered in the building master data using REBDBE. We have a tab called Graphics. The pictures etc of the building are uploaded using a software called Korasoft. When i am clicking on the Graphics tab, it is entering the screen but immediately afterwards flashing the following message, "Internal error when implementing extension".
Doing a F1 on the error message shows the foll details:
"Diagnosis
An internal error occurred during the implementation of a customer-specific enhancement. A CHANGE-API module was called with an object reference (parameter IO_OBJECT) that was not instantiated in the required activity for changing (02). The API modules are function modules and begin with API_RE_.
Procedure
Within the BAdI implementation, transfer the parameter IO_OBJECT from the BAdI method directly to the API module. Make sure that the transferred instance is allowed to be changed."
I found that the SAP note 1139014 causes this error message to be generated. Note 1139014 forms a part of support pack level 13 (release 600). Recently we have upgraded our systems from support pack level 8 to support pack level 13. Naturally even this note got implemented at that time.
But now this note is causing this error message and so I will be grateful if someone can please tell me how to rectify the error.
Regards,
Suvarghya Dutta
Edited by: Suvarghya Dutta on Feb 11, 2009 5:30 PM

Hi Fabio,
I would kindly ask you appy the SAP note [1521903|https://service.sap.com/sap/support/notes/1521903] and proceed as described in the note to resolve the issue.
Hope this information is helpful for you.
Regards, Franz

Internal error when implementing extension

Hello everyone
At the moment I create a new contract (transaction RECN) an error occurs and I can not solve.
Someone could help me?
Internal error when implementing extension (see long text)
Message no. RECAAP093
Diagnosis
Call of GET_EXTENSION( ) method for enhancement CL_FILACI_VICN01_EXTENSION failed.
It tried to use an add-on or customer-specific enhancement that is not implemented in your system.
To be able to determine the technical attributes of enhancement CL_FILACI_VICN01_EXTENSION, the RECA_STORABLE_EXT Business Add-In has to supply the desired information. However, this was not the case. In an implementation of RECA_STORABLE_EXT, the GET_OBJNAME_EXT( ) method must supply the required enhancement CL_FILACI_VICN01_EXTENSION.
Below is example code for GET_OBJNAME_EXT( ):
CASE ID_OBJNAME_STD.
WHEN '...'.
APPEND 'CL_FILACI_VICN01_EXTENSION' TO CT_OBJNAME_EXT.
ENDCASE.
For more information, refer to the documentation for the RECA_STORABLE_EXT Business Add-In.
Start BAdI Builder
Procedure
Contact your system administrator.
tks a lot!

Hi Fabio,
I would kindly ask you appy the SAP note [1521903|https://service.sap.com/sap/support/notes/1521903] and proceed as described in the note to resolve the issue.
Hope this information is helpful for you.
Regards, Franz

VDI 3.1 EA - Internal Error when assigning a user to a pool

Similar Messages

Maybe you are looking for