Vendor Consignment - Mvmt 411k ISsue

Hi:
This seems to be strange to me. I would like to get explanation and if possible resolution for following problem when we perform movement type 411 K through MIGO to own stock stock from Vendor consignment to own stock disposition.
When doing a transfer posting from vendor consignment into our own stock you have the chance to change the destination material so, taking stock from consignment lets you create stock of any other material.
That means System allows me to change the destination Material to different material.
e.g. I have a stock of Material A under Vendor consignment of 5 Ea.
When I perform movement 411 K through MIGO, On transfer posting tab, System allows me to change destination Material to B and hence it increases stock for Material B and not A. Means Stock of A is issued from the consignment and increased for material B in own stock.
Any Idea??/

Hi,
The system has allowed u to change the destination material but if u try to post it, it will not allow u, it first throws an error
saying
The "receiving" material is not managed in the same stockkeeping unit as
the "issuing" material. A transfer posting "material to material" is
only possible if both materials are managed in the same stockkeeping
unit.
System checks that u r trying to do material to material transfer so it throws above error saying base UOM of both the material should be same.
Even if u try to post it with two material having same UOM , then it says this movement type 411K is not allowed for this posting.
Just try posting it, it will not allow u.
Even though it has accpeted ur entries but during check it throws an error message.

Similar Messages

  • How to Handle Returns of Vendor Consigned Stock Issued via Delivery ?

    Hi.
    I am currently able to issue Vendor Consigned Stock via Delivery. I use Lean Warehouse Management, and I have implemented Stock Determination Rule to take Vendor Consigned Stock and Unrestricted own stock in account during Issue. I am even able to insert the correct Vendor Number during the confirmation of the Transfer Order. When I generate the Goods Issue of the Delivery Order, I get an accounting document that affects both the Account Payable Liability and a Consumption Account.
    Now My Question is this :
    How do I handle Customer Complaints that lead to a Return of the Goods, back into Vendor Consigned Stock ? The goods that is returned, needs to be taken back into Vendor-Consigned Status, and a appropriate Accounting Document needs to be generated to reverse out the Acct Payable Liability and Consumption Account entries.
    Do I use a Returns 'RE' Sales Order to bring back the Stock ? I need to be able to create a Return Delivery that will immediately post the returned Stock back into Vendor Consigned Status. So where and how can I key in the vendor number in the Return delivery, keeping in mind Return Delivery in Standard SAP does not use Warehouse Management ?
    regards
    Peo

    Hi Edmund
    I think you can try the following:
    1. Define a new schedule line category - here you can define the movement type and the item category (as given in a Purchase Info Record). - Transaction VOV6
    2. Define a new sales order type for returns. - Transaction VOV8
    3. Define a new item category for the returns document, - you can mention the special stock type here too
    4. Carry out the sales order to item category and item category to schedule line category assignments.
    I am not sure if the system will prompt you to provide the vendor number or how does it populate the vendor no. while posting the material doc. However you can try this out and check if this solves your issue.
    Reward points if you find this helpful

  • Vendor consignment issue price determined by Customer

    hi all expert,
    i have the following business requirement.
    we have vendor consignment stock. the consumption price for the vendor is based by the customer which we are selling to.
    i have configured stock determination, movement type 601K is used for sales order outbound delivery. it picks up the info record price of the vendor directly.
    however, the info record doesn't not have customer information. therefore i have tried to create a new access sequence table 817 copied from standard table 17. field KUNNR is added as following:
    LIFNR     KOMK     LIFNR     Vendor
    MATNR     KOMP     MATNR     Material
    EKORG     KOMK     EKORG     Purch. Org
    WERKS     KOMP     WERKS     Plant
    ESOKZ     KOMP     ESOKZ     Info record cat.
    KUNNR     KOMK     KUNNR     Sold-to party
    corresponding condition record is also been maintained.
    any chance that this access sequence is being run by the standard system when the price determination happen during the PGI for sales order?
    do i need to activate any user-exit for this business requirement?
    anything that i have missed?
    i have also activated the customer field in MB1B 411K movment type. hoping that price determination also take this customized access seq. to determine the price when moving K-stock to own stock.
    many thanks!
    Matthew

    We have designed a solution that allows the vendor consignment price to be discounted based on the Customer we are selling to.  Although this is an old thread, I wanted to post in case it is of benefit to others in the future.
    In summary, we created a new pricing condition table that includes Customer (KUNNR).  In a user exit that is available in the pricing routine for movement 411K, we retrieve the sold-to customer number.  In our case, we do this only when picking an outbound delivery.  Our business rule is that consignment stock is automatically moved to unrestricted stock at time of picking and we have already automated the 411K movement via our custom RF picking solution (by calling HU_CREATE_GOODS_MOVEMENT).  Since we know the delivery line we are picking, we can get the sold-to customer.  We are HU managed and already have our own ZHUMO transaction (a copy of HUMO) that we could modify so the user can optionally enter Customer when manually executing 411K for an HU, which would execute the same pricing user exit described below - still determining business rules for HUMO piece.
    Details...
    Passing Customer Number to Pricing:
    1.  At time of picking with custom RF transaction, call function module HU_CREATE_GOODS_MOVEMENT to execute 411K movement.
    2.  Extend User Exit EMM115 to get the Customer number (from delivery) and Vendor at time of 411K and pass it to the pricing procedure.
    Pricing Procedure - Create new Condition Table, Condition Type, and Access Sequence:
    When 411 K movement is posted, the system will grab the info record pricing (maintained in MEK1) for pricing condition PB00 from Pricing Procedure ZM0000 - access 0002, and now also grabs our new pricing condition - access ZCPD, if conditions are met as described below:
    - Append u201CField Catalog (Pricing Purchasing)u201D - ABAP programmer adds Customer (KUNNR) representing Sold-to in the purchasing catalog
       - Create New Condition Table (ex: u201C514u201D) with the following fields:
          1. Sold-to Customer (KUNNR)
          2. Vendor (LIFNR)
          3. Material (MATNR)
          4. Plant (WERKS)
    - Create new Access Sequence ZCPD and attach the new condition table
    - Add Access Sequence ZCPD to new Pricing Condition ZCPD - Consignment Discount %
    - Modify ZM0000 Pricing procedure (Calculation Schema) to access ZCPD.
    Maintain New ZCPD Condition Record:
    - Once Condition Table has been set up and associated to new Pricing Condition ZCPD, a condition record will need to be maintained in MEK1.  The condition record will house the specific combination of Material / Plant / Vendor and the line items will contain the Customer # & Discount %.

  • About goods issue from vendor consignment stock

    Hi, I meet some issue needs your help!
    The outbound delivery needs to post goods issue from vendor consigment stock directly. then how to choose which vendor's
    stock for this delivery base on the actual process?
    thanks
    Best Regards,
    Rory

    Hi
    In R3 it is not possible
    If say material X is 100 units lies in your premises the vendor  consignment stocks (the vendor property lying in your premises ) and out of that 100 units if you are making a sales order and then a goods issue means it is not possible
    To sell that material you need to make it your own stock ( that is transfer from vendor consignment to your own ) as good as buying that stocks and then sell it
    But the same scenario is possible in IS retail
    For this iS retail server is reqd
    In Retail you can play with vendor consignment stocks as much as possible without making our own stocks
    You can search SAP library regarding the settings of the same
    http://help.sap.com/erp2005_ehp_04/helpdata/en/c6/af3c415e5dde2be10000000a1550b0/frameset.htm
    Regards
    Raja

  • Goods Issue from Vendor Consignment

    Hi All,
    Does SAP have a functionality to facilitate us to issue the stock
    against a customer order from the Vendor consignment?
    In fact there should be no transfer posting of the consignment to own.
    Stock should straight away get picked from the consignment stock while
    doing the PGI for the outbound delivery.
    I would appreciate for your valuable comments.
    Regards,
    S Anand

    Hi,
    You can achieve this using stock determiantion.
    SPRO > MM > IM > Stock Determination > Define Strategies for SD
    Here you have to define group, rule and assign them, etc
    SPRO > MM > IM > Stock Determination > Assign Stock Determination Rules for CP > Delibery
    Assign the rule to the suitable item category
    SPRO > MM > IM > Stock Determination > Assign Stock Determination Rules for CP > IM
    Assign the rule to the suitable movement type
    MM02 > Plant data / storage 2
    Assign the suitable group for your material
    Regards,
    Csaba

  • Goods Issue in SD delivery (from vendor consignment stock)

    Hi, all.
    I'm trying to make a goods issue in SD delivery from a vendor consignment stock (movement 601K), but the system gives me an error message M7071 - I have to enter a vendor at item level, but where? And if I have a stock determination strategie, why the system needs the vendor, if I have stock K available for a vendor?
    Please advise.
    Thanks,
    HA

    Hi Helena Maria,
    I think you have made some mistake in the movement types in the consignment processes..
    just go through this and its easy to remember...
    <b>Please reward if this is useful for you..</b>
    1. Consignment fill up:
    Sales document type is KB
    Item category KBN
    schedule line category 1
    In this step, you are not invoicing the customer. document flow is sales order -
    delivery item category. It will not be relevant for billing and pricing because you are not charging money for these goods in this step.
    In schedule line category, you will set movement type 631 & set for availability check and TOR.
    2. Consignment Issue.
    Once the customer informed you that he used all the goods or partial goods then you will create consignment issue for used goods.
    Sales document: KE
    Item category: KEN
    schedule line category: C0 or C1
    Here you are invoicing the customer(because he used the goods). you are assigning the delivery document and billing document to the sales document.
    In item category, you are setting relevant for billing, pricing, special stock.
    In schedule line category, your setting is 633 movement type, relevant for availability check & TOR.
    3. Consignment Return:
    Customer found that some goods are damaged or he not able to sold the goods he want to send it back. that you are creating this document.
    Sales document type: KR
    Item category: KRN
    You will assign delivery document and billing to sales document. you will create return order, return delivery, return billing.
    Your setting item category relevant for billing, returns, pricing, special stock.
    Your setting schedule line item category: 634 movement type, NO availability NO TOR.
    4. Consignment Pick up:
    Even if you create the consignment return the goods are not come to direct to your plant. For that you need to create consignment pick up. here the owner ship is not changing so you do not need to create billing.
    Assign return delivery to sales document type.
    Sales document: KA
    Item category: KAN

  • How to adjust vendor consignment stock

    Hello
    We have one material , that material is having one scheduling agreement (consignment), in 2003 he was received 3600 qty, that is shown in Purchase order history of Scheduling agreement, with 101 movement type and material document.
    when we saw now the stock in MMBE the 1800 qty is showing as vendor consignment.
    Now user says that, he has no any vendor consignment stock physicaly. now it is showing as 1800 qty vendor consignment.
    I have checked in MB51 there is no documents from 2003 it is showing only 2004 onwards
    if i suppose willing to scrapp then we need to take it as Unresticted stock, then Accounting document generates.
    if i want to cancel old material document , then this document is not exist of 2003
    How to remove the Vendor consignment stock? now
    sap

    Hi,
          They has not been done tranfer posting consignment to own(411k) and issues.Thats y stock is still avilabe.So user have to do these things in sap.
    If you want to do stock is nil without these things do Physical inventory but it is not advisable.
    Regards,
    Murali

  • Subcontract PO Item with Vendor Consignment

    Hi,
    We want to issue vendor consignment stock when processing subcontract PO.
    But we found that we need to identify the stock when issuing the stock with seperate operation.
    Is there any method to make it simpler?
    regards,
    Steven

    Hi
    I would suggest
    once you make the subcontracted PO and you know the quantity of goods to be supplied to the vendor then first do a 411k this good would come into your inventory, and then u can do 541. Also what you can do here is that if it is for a specific material then you can add a specific identifier in material master in any test field, therefore when 411 K is done for them 541 would be done automatically.
    Thanks
    Ankit

  • Vendor consignment M7001 Error

    hi.
    While doing the GI for raising the vendor consignment liability from MIGO with 201 K mvt type, after entering the vendor, the system is throwing such message.
    "In table XMRES the entry 0000000000 0001 is missing"
    Please provide me a path to follow on.
    Thanks for your time!!!!!!

    Hi,
    Had your PO is having the Item category as K ( consignment) ????
    Once you received from the vendor with respect to consignment PO... it will be in movemetn type 101K ( consignment stock)
    Now... u can issue to cost center (201K) or you can take to your own stock ( 411K)
    as per your 2nd answare ( but my GR is to unrestricted stock warehouse stock only??)
    it is understud that you have already taken vendor consignment stock to your own stock...
    Now if you want to issue to costcenter you have to take only 201 movement type.... not 201K
    Hope this is clear to you r question.
    REgards
    anand

  • Vendor Consignment stock or vendor managed stock

    Dear All,
    My client wants to manage vendor consignment stock.
    Vendor will be given a area and vendor will keep the stock in his area. Based on the plan he will supply the stock.
    the GR for rawmaterials will be made on the consumption report given by the production person. This activity will happen next day only. i will do the GR only to the quantity consumed.
    for example if i consumed 100 qty, i will do GR only for 100 and vendor will issue invoice for 100. But when the vendor issue the stock, he will raise a excise invoice based on which i have to take excise credit. I want to know how to do the same.
    secondly, i take credit for 100 qty, but actual consumption is 95 only, how do i reverse the 5 only excise invoice.
    regards
    ranga

    No, it is possible to sell from vendor consignment stock directly and I have done it in ECC 6.0 (not IS-retail).
    - Pls refer the note 607604.
    - Establish the 'stock determination rule' in MM -> Inventory Management -> Stock Determination.
    - You need to assign it to the material (MRP3 view) or assign it to item-ategory.
    - DONOT mark the special stock indicator in item-category used in SD (e.g. TAN) with 'K'..I did this mistake and wasted some time. If you do, it will ask you to populate the Vendor field in the Delivery which is not available and you may get stuck up because of that.
    This should make it work.
    Pls award points if you find this information useful.
    Regards,
    Shripad

  • Request for help on Vendor Consignment stock and Customer Consignment Stock

    HI Experts,
    We have a requirement to segregate the Customer Consignment stock and Vendor consignment stock from the total Consignment stock available in the BW report.
    Currently in the report the calculation of total consignment stock is based up on Issued consignment stock and Received consignment stock .
    The calculations of the Issued and Received consignments stocks are specified below.
    Issued consignment Stock
    The below following parameters are checked when the quantity is considered as Issued consignment Stock 
    Transaction or Process keys :  100, 101, 104, 105, 106, 110
    Application    :   MM    
    Stock relevance : 1
    Adding to the above conditions,
    u2022     When the stock category is u2018Ku2019, the Quantity in Base Unit of Measure is assigned to Issued Consignment Stock.  or
    u2022     When the stock category is blank and the stock type is u2018Eu2019 or u2018Ku2019 or u2018Lu2019 then also the Quantity in Base Unit of Measure is assigned to Issued Consignment Stock.
    Received Consignment Stock :
    The below following parameters are checked when the quantity is considered as Issued consignment Stock 
    Transaction or Process keys :  000, 001, 004, 005, 006, 010
    Application    :   MM    
    Stock relevance : 1
    Adding to the above conditions,
    u2022     When the stock category is u2018Ku2019, the Quantity in Base Unit of Measure is assigned to Received Consignment Stock.  or
    u2022     When the stock category is blank and the stock type is u2018Eu2019 or u2018Ku2019 or u2018Lu2019 then also the Quantity in Base Unit of Measure is assigned to Received Consignment Stock
    Only stock category and stock type are available in the BW report for determining the type of consignment stock . So, with respect to stock category and stock type, could you please kindly advise if it is possible to determine the Customer consignment stock and Vendor consignment stock in the report
    Thanks a lot
    Warm Regards,
    Jeswanth
    Edited by: jeswanth kadali on Jun 23, 2009 4:10 PM

    Hi,
    We can settle consignment goods to vendor through MRKO transaction.Even user transafers consignment stock to own stock through MB1B transaction.We can use same document to settle vendor through MRKO transaction.
    What is implications of such Action (like Goods issue, 1 step transfer) on SAP.
    Nothing will happpen after after stock converted to own stock.
    Regards,
    JS

  • T-code WV31 create physical inventory for vendor consignment stock

    Hi all,
    I have some issue with T-code WV31i n Sap Retail. Even though it supposed to create physical inventory doc for unrestricted use stock, it also create physical inventory Docs for special stocks (vendor consignment stock). What could be the reason?
    Best regards
    Sameera
    Edited by: Sameera on Dec 23, 2011 7:07 AM

    Hi,
    If i do physical inventory for 2 quantity.
    1. Consignment Payables account debited with 2 qty ( Now stock becomes 4 nos)
    If i issue 4 quantity
    2. Consignment Payables account credited with 4 qty.
    If i do consignment settelment, it is setteling 4-2 (for 2 quantity).
    But I want to settele for 4 quantity.
    Thanks,
    Maruthi

  • Vendor Consignment handling in SAP B1 9.0

    Hi all,
    How to handle Vendor Consignment in SAP B1 9.0.
    Issue:
    User places a purchase order receives stock as consignment. No effect should be shown on inventory reports and no financial impact shall be there.
    Further user bills the Vendor for the quantity for which he sends the bill exactly.
    at this point only finance and inventory shall reflect the change.
    Tried:
    Added a dropship warehouse in name of consignment, created the GRPO with no impact on finance/Inventory. But can not make Inventory transfer to actual warehouse from consignment warehouse as this is a dropship warehouse.
    Thus unable to reflect inventory in system.
    Please suggest the most appropriate solution.
    Thanks.

    Hi
    check this note 1089092 - Handling Consignment in SAP Business One
    Kind regards.
    Agustín Marcos Cividanes

  • Control of vendor consignment stock

    Hello
    We have agreements with some of our suppliers about vendor consignment stock. Problem is that from a financial point of view, we don't fell we are having enough control about the values of the consignment stock.
    When the supplier deliver the goods physically on our location, we agree about the prices. Deliveries to other prices can be mixed with each other - in other words; we do not empty the consignment stock before getting new materials from the vendor. When ordering materials for consignment stock it is done via a purchase order, item category K and price 0.
    When using the consignment stock material we do it via MVT 411, which creates a posting - value of this posting is the price from an info record. Monthly the consumed materials are settled via MRKO.
    Problem is that we would like to know the price of the consignment stock - before it is used in production, even though it is not our goods, but we have committed to pay a specific price.
    Best regards
    Søren Kirch

    Hi
    Please note that in ECC 6.0 way back in 2006 SAP had introduced new functionalities for Consignment material for Retail (internal distribution) and for wholesale customer sale (SD sale).
    To over come this problem of stock determination for DC to store distribution (Plant to Plant) we need to do customization for stock determination and prioritization of stock (which type of stock should be considered when a particular movement type is called).
    The same stock determination group once configured and assigned to movement type should also be maintained in Article master Store or DC view. Article consignment indicator in the Article Store or DC view should also be marked as "1".
    Depending on the Source of supply 2 or A the transactions pick up stock types as mentioned in the Stock determination group (As prioritized).
    When you create an STO (Stock transfer order) the item category for Consignment is not populated any where but when you do Goods issue in outbound delivery the 411 K indicator will be picked up in the background.
    This will allow movement of Vendor consignment stock from one plant to another.
    I hope i answered your question.
    Devesh

  • Vendor consignment India Localization scenario

    Hi Guys,
    I am working on Vendor consignment India Localization scenario. We are using TAXINJ procedure and for good receipt we use MB01.
    I follow the below process.
    1.Created Consignment Info Record with appropriate tax code and Base Price.
    2.PO with item category K.
    3.Good Receipt for PO (MB01) movement type 101. Entry to RG 23A Part1 reg.
    4.Transfer posting consignment stock to own stock ,Movement type 411K.
    When I am trying to Post the excise Invoice ,T/C J1iEX ,it is throwing me an error u201CPlease check excise base for the item is zero !u201DIt seems because of Purchase order price as in consignment PO the price is u201C0u201D.
    I have tried below mentioned processes for trial basis but it gives the same error message.
    1. First capture part1,Good receipt(MB01).
    2. Put an accessible value in J1ID for the material and then tried the scenario.
    3. Capture wrt Material doc(tried for both 101 and 411 doc) using j1I5.
    4. Tried to capture the excise Invoice using with selection without reference to Purchase order. I entered the Material, Chapter ID,Plant,Quantities,UoM,Duty rates,Exc group, vendor ,Ex Inv no,Doc date but here it doesnu2019t calculate the duty values., I am getting the information message.1) Available Credit quantity 100.000 is different from the defaulted 0.0 .2). BED, AED and SED for the excise item is zero.
    I posted this question to MM forum also but no one replied.can you help me here?
    Thanks in Advance,
    Sarvesh Kumar Vashist

    hi
    you have to capture the excise invoice against the Purchase order and then you have to post the entry.

Maybe you are looking for