Vendor not coming in RFQ from PR

Hi,
I created PR, and i checked source determination and i got fixed vendor in PR from source list...
Now while creating RFQ wrt above PR, i am getting entire details along with vendor...Now after clicking adopt + details, i can see all details of PR but vendor field is not getting fetched in RFQ..
Why?
Utsav

Hi,
In general:
In any businesse PR is created by the concren person who is goining to consume the material may be production people may be admin or any other dept.
Now RFQ is created by Purchase dept. again its depends on them whether they will raise the RFQ or they will raise the PO directly. As you said price flactuation , now purcharer may need to confirm from some other vendor also. So you can not say fixed vendor.
Moreover UtsavI will request you to open the PR, go to the feild fiexd vendor and read the help file.
regards
anamika

Similar Messages

Educationau200Bl SCessCVD (J1CV) is not coming in MIGO from MIRO

Hi,
This is a scenario of Import Purchasing of Excisable Material
I did Invoice Verification (MIRO) for Custom and CVD and while doing Goods Receipt (MIGO), I referred the Invoice Document No. as well.
The value of CVD (JCV1), ECess CVD (JECV) and Add. Customs duty (JADC) is being captured in MIGO from the Invoice document but the value of Educational SCessCVD (J1CV) is not flowing from the Invoice document.
The CIN settings regarding Excise default seems to be properly maintained for the rest three condition types above mentioned but since the condition type J1CV is hard coded in SAP so this couldn't be maintained in Excise Default.
Please provide the expert opinion to overcome this issue.
Thanks in advance
Rajesh Praveen

Hi
J1CV SEcess you have to maintain in AT1
Check once again Chapter ID Tax indicator, Vendor Tax indicator, Cenvat determination for particular materials all are in J1ID, and check your condition type is in classify condition types
[Re: Ecess and SCEss values are not coming automatically in MIGO for import;
Regards
Kailas ugale

Subtemplate footer is not coming when calling from the main template

Hi All,
The footer from the subtemplate is not coming in the output when calling from the main template. Does anybody worked on the subtemplate?
If the same footer is put in the main template, it is displaying.
Please respond as this is a critical issue for us.
Thanks,
Ambadas

Hi Tim,
Thanks for your reply. Here is syntax which I got from the Oracle BI Publisher blog. And this is to just test locally.
http://blogs.oracle.com/xmlpublisher/2006/04/11?import:file:///C:/temp/HeaderFooter.rtf
<?import:file:///d:/test/GEPOPRINT_GER_GER.rtf?>
<?import:file:///d:/test/GEPOPRINT_US.rtf?>
<?for-each@section:G_HEADERS?>
<?if:POH_REPORT_NAME='GER PO w/GERMAN Data'?>
<?call-template:PO_GERMAN?>
<?end if?>
<?if:POH_REPORT_NAME='US Purchase Order'?>
<?call-template:PO_US?>
<?end if?>
<?End for-each?>
And I don't have any footers in the main template but in the subtemplate I have the respective footers. If you want, I can send all the RTF's to you directly.
Let me know.
Thanks,
Ambadas

Data not coming to BW from SAP system from last 7 days....please help

Hi Experts,
I am monitoring the process chain from last 7-8 days but no data is coming to BW from SAP R/3 . then i checked in SAP R/3 system in RSA7 there weree no queues it was empty. then i checked LBWQ and some MCEX03,MCEX11,MCEX13,MCEX04 were there and i double clicked on one of them then i saw the status in queue as NOSEND . we have used QUEUED DELTA as update mode in LBWE. now i want to bring data for last 7-8 days in BW system. please can anyone provide me the detail steps for this as it is our PRODUCTION system. please provide the steps...!!!!

Hi,
Go to SM37 in your R/3 environment and check if there are any jobs starting with LIS* in released status. This is the job which would push the entries from LBWQ to RSA7 for specific applications. If there are no jobs, this is the reason for your problem.
If you do find any job there, then double click on them to check their frequency. Generally it should be hourly.
If there is no such job, then go to LBWE. For each of your applications, click on Job Control and maintain the job scheduling. In the start date, maintain it as periodic job. Then simply schedule teh jobs. Once the jobs are scheduled, after every run of them, LBWQ would get cleared.
Then it would get picked from RSA7 by the BI job.
Edited by: Rahul K Rai on Dec 8, 2010 4:00 PM

"Clip Time" not coming through properly from P2 Cards

Hi,
I'm using Log and Transfer to bring across video shot yesterday. I setup a custom Name Preset to include the time the clip was shot at. The clips aren't coming across with the actual time they were shot though. The first few clips were shot around 7:30AM and are coming across as "01-30-09", which I'm assuming means 1:30 and 9 seconds. I checked the time on the camera (HPX-170) and it is set properly, but the timezone wasn't... it was set at 00:00, but should have been -06 :00.
The workflow so far:
1. Shot on HPX-170 to two 64GB A series P2 cards
2. Used Pansonic's P2CMS to transfer clips from camera to external hard drive (does anyone else use this software? It seems to do a good job, but is the ugliest thing ever. Any other options?)
3. Using Log and Transfer to bring clips from external drive to internal RAID.
Here's the Clip metadata:
<CreationDate>2010-09-29T07:30:09+00:00</CreationDate>
<LastUpdatePerson>stevemebs</LastUpdatePerson>
<LastUpdateDate>2010-09-29T16:04:57-06:00</LastUpdateDate>
It seems like maybe the problem is that the time zone isn't set properly on the camera, but is set properly on my computer (-06:00) so the clips were automatically adjusted to local time. Is there any way to adjust this on the clips so they come in with the proper times? Without going through and editing the metadata on all 50 clips preferably.

I use ShotPut Pro. It not only will automatically create the folders, with names, and backup the cards when you insert them, but it will also do a data verification. All automated.
After you make the disk image, do you use Find & Transfer to transfer the clips directly from the P2 cards in the camera? (I'm assuming you can't transfer from the .dmg.)
NO NO NO! From the backup. Because you have those Unique file names, those names are your REEL numbers. So you can track the footage.
Gotta watch this mebs... Tapeless Workflow for FCP 7 Tutorial
Shane

Deltas are not coming to RSA7 from SM13

Hi All,
In BW i am not getting Delta's for 2LIS_02 Datasources,
I have checked in RSA7 it is showing 0 Records, but in SM13 there are many V2 Processed Jobs.
Please can anybody help me how to get Delta's to RSA7, this problem is persist since 1 week.
Regards,
Kiran

Hi Praveen,
I have run that, still i am not getting records in RSA7.
I have followed like this, Please correct me if i am wrong
Gone to LBWE, Selected Job Control towards 02,
Maintained Start Data is Immediate in Job Parameter,
And Scheduled Job from Job Control,
When i checked in SM37, there is no job, Only one job is in Released state for Tomorrows load.
Please let me know your views on this.
Regards,
Kiran

ALEAUD not coming to SAP from XI & u0093Acknowledgment not possible" in idx5

Hi All,
I am trying to configure ALEAUD in SAP->XI->JDBC scenario for Idoc acknowledgment.
I did following config in SAP
WE21 create port for XI
WE20 create Partner type XIDLOGSYS1 LS , Inbound parameter ALEAUD.
In XI I delete all entries from IDXNOALE table.
But still I am not receiving any ALEAUD in D02 when, any IDOC posted from SAP to XI.
In SXMB_MONI I am able to see Ack status Acknowledgment not possible
Please guide how to get ALE AUD in SAP from XI.
Regards

Before I ask my questions, please note I do have a copy of the "How To Handle Acknowledgements for IDoc" How To Guide. I just need some clarification from the group.
Here are my questions:
1. XI will not send a positve acknowledgement/status to let the sender system know it made it to XI ok, correct?
2. The only status that XI itself will initiate will be if there is a techncial issue with XI, correct? (Granted the Receiver system could send a positive or negative status back to Sender System) I just want to make sure that XI will not send a status back to Sender System that equates to "Triggering EDI subsystem OK" (or something like that)
3. How does the status of an idoc get set to 12 from 03? Does that mean that I always have the program RBDMOIND configured when I am interfacing to XI in order to force the status from 03 to 12?
4. As a norm, are those who are using XI seeing a 12 status on the Sender System IDoc Status?
5. If a techical issue error occurs in XI, what specific error status will be sent back to the Sender System?(if at all) I am looking for an example status number of what to expect.
6. If we are doing SAP R/3 to a partners XI system directly and that partner does not have RBDSTATE configured on their SAP R/3 environment and there is nothing else on their XI system for ALEAUD processing, I am out of luck in determining if the IDoc actually made it to their XI system, correct?
7. The Configure Scenario 2 in the document How To Handle Acknowledgements for IDoc" How To Guide should allow us to determine "did the Idoc get to that Server" correct?
Thanks for any feedback on this,
Ian

Theme not coming properly

Hi Experts,
We are having Federated Portal and the custom theme XYZ is developed in Consumer Portal. The ESS/MSS iviews are linked through Remote Role Assignment from Producer portal.
The theme is not coming properly. From Mashead to Top level navigation the theme XYZ is coming correctly but when I opens the page having iviews then the iView Tray is showing the SAP Standard theme and the content in the iView is sometimes taking correct XYZ theme.
I have cleared Federated cache, navigation cache and also cookies, but still it is not coming properly.
When I view source iView then
<html><head><LINK REL=stylesheet HREF="/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/sap_standard/prtl_std/prtl_std_ie6.css?7.1.6.0.0">
Please suggest.
Regards,
Deep

Try by re-starting the portal.
This is rarely necessary when dealing with the SAP Portal theme.
The advice from Sushil looks more like the solution as it is common to not upload the consumer portal theme in the producer portal. Because in an FPN the producer theme will be used when the consumer theme isn't found:
[SAP Note 880482|https://service.sap.com/sap/support/notes/880482]
http://help.sap.com/saphelp_nw04s/helpdata/en/5b/9f2d4293825333e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/46/06f6dc000a5a68e10000000a1553f7/content.htm
"If you are using custom made themes or have modified any of the out-of-the-box themes on the consumer portal, an administrator must manually import these themes to the producer portal. "
Next source of problems with themes is when your consumer and producer are on a different version (specifically when the producer is on a higher SPS or EHP) even when the consumer theme was imported into the producer.
br,
Tobias

The vendor code is not coming against some Assignment line items with the

Hi All,
While executing t.code FBL3N,the vendor code is not coming against some Assignment line items with the GL A/C4607000, some line items it is coming.
The GL A/c 4607000 is GR/IR clearing a/c.
Please let us know why this situation is happeing at the time of FBL3N.
Thanks
Ram

HI,
By activating the special fields you can the vendor number, but use the new reprot called "FAGLL03 - Display/Change Items (New) ".
First go to SPRO> Financial Accounting (New)> General Ledger Accounting (New)--> Master Data > G/L Accounts>Line Items --> Define Special Fields for Line Item Display
Click on New Entries -
Table - BSEG - Field - LIFNR
Save. Now execute the report - FAGLL03 - Display/Change Items (New)
Give the gl account number and execute.
After getting the line items list from menu select --Settings --> Special Fields --> Click on New Entries --> Enter Table BSEG, Field Name LIFNR.
After this come back and execute again. It will give you the vendor number.
Thanks & Regards,
Shashi Kanth.

FBL1( VENDOR LEDGER REPORT)- Withholding tax amount is not coming .

in FBL1 ( vENDOR lEDGER rEPORT) - WITHHOLDING TAX AMOUNT IS NOT CMING IN COLUMN QBSHB OF FBL1.
Purchasing document number is not coming also.
How these fields may appear in the above said report. Is any config missing ?
Thanks in advance
M K Agarwal
9967029930

TDS posted from MIRO will not reflect in line item report, i have taken opinion from SAP for the same issue few days back, SAP has given the following opinion.
*With reference to the difference in behaviour as compared to the document posted for example from MIRO which is an MM transaction and FB60 which is a FI transaction please note the following:
The withholding tax amount that you are using i.e. Field BSEG-QBSHB is designed to fill for the classic withholding tax. And extended withholding tax information is stored exclusive in table WITH_ITEM.
Also note that MIRO does not give the user the control in case of Classical withholding tax. It only supports Extended withholding tax. Hence it does not populate BSEG fields in case of Extended WT.
So in MIRO, the data for extended withholding tax are saved within the table WITH_ITEM and not within the table entry BSEG-QBSHB. The latter isnot updated during the procedure. Furthermore it is not possible to select data from table WITH_ITEM
within the transaction FBL1N in a transparent and unique way, as FBL1N only reads BSEG / BSIK / BSAK tables.
In your line layout,you define a field BSEG-QBSHB. But actually the field of vendor/customer line item is filled with zero from FI. Thus,it shows zero in line item display*
Please review note 363309 for detailed explanation and explains the functionality which is valid even for your release.
So it is not possible to display withholding tax information in the line item display transactions, since this information is not
held in the BSEG / BSIK / BSAK tables, but is instead stored in the WITH_ITEM table.
Please convey to your client, standard SAP will not show the TDS information in line item reports, documents posted from MIRO and refer the note 363309.

Vendors not getting published from Sourcing 7.0 to ECC

Dear Experts,
In our SAP Sourcing System version 7.0 we are not being able to publish suppliers from Souring to ECC but opposite is working fine i.e Vendors are coming from ECC to sourcing perfectly fine.
When ever we are creating a supplier in Sourcing and trying to publish it to ECC the status always remains as "Create Supplier : Waiting For Response" . Even iDocs are not getting created and also in PI we are not getting any data in the inbound area.
Any help will be appreciated.
Regards,
Rakesh Daiya

Hi Rakesh
Please check if the Interface and communication channel have been configured properly from PI side -
Communication Component (Sender): SAP Sourcing system
Interface : MI_OB_Supplier
Namespace : http://sap.com/xi/Esourcing/SRMJS/OP
Communication Channel : CT_Generic_Receiving_IDOC_Channel_For_ERP_Inbound_IDOC
Thanks
Sudipta

Data from one cube is not coming in the multiprovider

Hi,
I have two cubes with a common characterstic.
I created multiprovider above these two cubes. But data is not coming from the cube 2. The values from cube 2 are showing as 0.
Can anyone help me out in this?

Hi ,
Check the following:-
1 Check whether you have made the joins properly.
2 Check data at multiprovider level .
3 is data available for reporting in both the cubes
Regards
Rahul

Data not coming from DOE to Mobile After defining Rule for device attribute

Hi All,
I have created a DO and rule for it.In case of Bulk Rule for all definition when i triggere extract from Portal then all the data comes to outbound queue but when i define rule for Device attribute then no data comes to my Outboun queue.Here is the scenario what i am doing :
1. I have order header in my backend which has a field named "Work_Center" and this will be criteria field.
2. In CDS table i have all the records for all the work center.
3. Now in RMM under customized , i have added an attribute named "Work_center".
4. Now i defined a rule with Device attribute mapping and activated the rule.
5. Now on Portal i assigned this data object and in the device attribute tab i assigned the value(this value exist in CDS table for few orders) of a Work center to the attribute "Work_Center" .
6. Then i triggrere extract but its Outbound queue is empty, what could be the reason.
Is my approach is correct
Regards,
Abhishek

Hi Abhishek,
You can check one ore thing, after you have performed all the steps till step 5, i.e. just before triggering
extract. Check if the AT table for ur DO has entries based on the criteria specified by you...
1. In the workbench click on the Data Object, and then right click and select "View Metadata".
2. Select Distribution Model tab.
3. Now select your DO's Association table.
4. For the input field DEVICE ID specify your corresponing device id,and also for status field specify it
as "I" and execute
If there are any entries now in the AT table, and on triggering extract if they are not coming to the
outbound Q there is some EXTRACT Q blocked. And is there were no entries in the AT then the rule
specified is not the satifying.
Thanks,
Swarna
Now if you have entries w

Data Not coming From DSO to Cube

Hi All,
I have data in DSO. When i run the DTP , request status is green.
Now when i go to cube and see the data the request has came but data has not transferred .....
The Request Status is green in cube but data is not cuming....
No transferred data.
How can bring data in cube..??
Regards,
Rohit

Hi,
When you loaded the DSO......after that are you loading the cube for the first time?If so .....and still data is not coming..then check if the last loaded request somehow got deleted from the DSO....
If after loading the DSO....you have already loaded the cube...and this is the second time you are loading the cube.........then obviously it will pick 0 records...........since delta DTP always picks the fresh new request..........if there is no new request in the source .......then it will pick 0 records.......
Also both the cased are not working.........then check the End routine or Start routine.if any.......
Thanks and Regards,
Debjani.......

Profit Center Not coming in Vendor Line Item in MIRO

Hi Experts,
We are facing one problem when we are posting miro in one plant profit center is coming in vendor line item in miro. But when we are posting miro with the same material code but with different plant same company code. But in miro vendor line item profit center is not coming.
What mistakes we have done in spro.
Kindly help me out.
Regards
GR

Hi
Normally vendor line item will not carry profit center, hence I think this is populated through some enhancements.
Hence you may need to analyze with the help of an Abaper.
Regards

Vendor not coming in RFQ from PR

Similar Messages

Maybe you are looking for