ALEAUD not coming to SAP from XI & u0093Acknowledgment not possible" in idx5
Hi All,
I am trying to configure ALEAUD in SAP->XI->JDBC scenario for Idoc acknowledgment.
I did following config in SAP
WE21 create port for XI
WE20 create Partner type XIDLOGSYS1 LS , Inbound parameter ALEAUD.
In XI I delete all entries from IDXNOALE table.
But still I am not receiving any ALEAUD in D02 when, any IDOC posted from SAP to XI.
In SXMB_MONI I am able to see Ack status Acknowledgment not possible
Please guide how to get ALE AUD in SAP from XI.
Regards
Before I ask my questions, please note I do have a copy of the "How To Handle Acknowledgements for IDoc" How To Guide. I just need some clarification from the group.
Here are my questions:
1. XI will not send a positve acknowledgement/status to let the sender system know it made it to XI ok, correct?
2. The only status that XI itself will initiate will be if there is a techncial issue with XI, correct? (Granted the Receiver system could send a positive or negative status back to Sender System) I just want to make sure that XI will not send a status back to Sender System that equates to "Triggering EDI subsystem OK" (or something like that)
3. How does the status of an idoc get set to 12 from 03? Does that mean that I always have the program RBDMOIND configured when I am interfacing to XI in order to force the status from 03 to 12?
4. As a norm, are those who are using XI seeing a 12 status on the Sender System IDoc Status?
5. If a techical issue error occurs in XI, what specific error status will be sent back to the Sender System?(if at all) I am looking for an example status number of what to expect.
6. If we are doing SAP R/3 to a partners XI system directly and that partner does not have RBDSTATE configured on their SAP R/3 environment and there is nothing else on their XI system for ALEAUD processing, I am out of luck in determining if the IDoc actually made it to their XI system, correct?
7. The Configure Scenario 2 in the document How To Handle Acknowledgements for IDoc" How To Guide should allow us to determine "did the Idoc get to that Server" correct?
Thanks for any feedback on this,
Ian
Similar Messages
-
Opened Notes and screen changed from listing my notes to no notes. How do I recover the missing notes?
Would you please explain how you did this? Most of my Notes dissapeared after the latest update. I tried restoring them from TM, but nothing shows up and QuickLook only shows (null). I took them from the IMAPnote file under (eventually) CoreData (~Library/Containers...), but that is not working for me. My Notes are synced with iCloud, so my solution may be different from yours.
Thank you. -
Data not coming to BW from SAP system from last 7 days....please help
Hi Experts,
I am monitoring the process chain from last 7-8 days but no data is coming to BW from SAP R/3 . then i checked in SAP R/3 system in RSA7 there weree no queues it was empty. then i checked LBWQ and some MCEX03,MCEX11,MCEX13,MCEX04 were there and i double clicked on one of them then i saw the status in queue as NOSEND . we have used QUEUED DELTA as update mode in LBWE. now i want to bring data for last 7-8 days in BW system. please can anyone provide me the detail steps for this as it is our PRODUCTION system. please provide the steps...!!!!Hi,
Go to SM37 in your R/3 environment and check if there are any jobs starting with LIS* in released status. This is the job which would push the entries from LBWQ to RSA7 for specific applications. If there are no jobs, this is the reason for your problem.
If you do find any job there, then double click on them to check their frequency. Generally it should be hourly.
If there is no such job, then go to LBWE. For each of your applications, click on Job Control and maintain the job scheduling. In the start date, maintain it as periodic job. Then simply schedule teh jobs. Once the jobs are scheduled, after every run of them, LBWQ would get cleared.
Then it would get picked from RSA7 by the BI job.
Edited by: Rahul K Rai on Dec 8, 2010 4:00 PM -
Educationau200Bl SCessCVD (J1CV) is not coming in MIGO from MIRO
Hi,
This is a scenario of Import Purchasing of Excisable Material
I did Invoice Verification (MIRO) for Custom and CVD and while doing Goods Receipt (MIGO), I referred the Invoice Document No. as well.
The value of CVD (JCV1), ECess CVD (JECV) and Add. Customs duty (JADC) is being captured in MIGO from the Invoice document but the value of Educational SCessCVD (J1CV) is not flowing from the Invoice document.
The CIN settings regarding Excise default seems to be properly maintained for the rest three condition types above mentioned but since the condition type J1CV is hard coded in SAP so this couldn't be maintained in Excise Default.
Please provide the expert opinion to overcome this issue.
Thanks in advance
Rajesh PraveenHi
J1CV SEcess you have to maintain in AT1
Check once again Chapter ID Tax indicator, Vendor Tax indicator, Cenvat determination for particular materials all are in J1ID, and check your condition type is in classify condition types
[Re: Ecess and SCEss values are not coming automatically in MIGO for import;
Regards
Kailas ugale -
Agent is determining properly but workitem is not coming in sap inbox.
Hello Expert,
In my workflow agent is determining properly. i have seen from workflow log.
but the workitem(approval mail) is not coming into agents workflow inbox.the problem is happening in production.
same workflow is running successfully in development. means workitem is coming in agents workflow inbox.
i don't have authorization in T CODES SCOT SO16 so I can check and suggest something.
I want to ask that is it any config issue or something else.
is there any other way so i can cross check.
please help.
thanks raj.Hi Rajib,
Check in the workflow log in production for the user decision task what error message it displays. If it is stuck due to missing agents, then there is a possibility that you missed to transport the agent assignment for the workflow task. Check if the same was included in the customizing task that is transported.
Also check if the buffer refresh was done after the changes were imported in the production system using transaction SWU_OBUF.
Regards,
Saumya -
Subtemplate footer is not coming when calling from the main template
Hi All,
The footer from the subtemplate is not coming in the output when calling from the main template. Does anybody worked on the subtemplate?
If the same footer is put in the main template, it is displaying.
Please respond as this is a critical issue for us.
Thanks,
AmbadasHi Tim,
Thanks for your reply. Here is syntax which I got from the Oracle BI Publisher blog. And this is to just test locally.
http://blogs.oracle.com/xmlpublisher/2006/04/11?import:file:///C:/temp/HeaderFooter.rtf
<?import:file:///d:/test/GEPOPRINT_GER_GER.rtf?>
<?import:file:///d:/test/GEPOPRINT_US.rtf?>
<?for-each@section:G_HEADERS?>
<?if:POH_REPORT_NAME='GER PO w/GERMAN Data'?>
<?call-template:PO_GERMAN?>
<?end if?>
<?if:POH_REPORT_NAME='US Purchase Order'?>
<?call-template:PO_US?>
<?end if?>
<?End for-each?>
And I don't have any footers in the main template but in the subtemplate I have the respective footers. If you want, I can send all the RTF's to you directly.
Let me know.
Thanks,
Ambadas -
The work item not coming in SAP inbox ....
Hi experts,
I am doing PR realese workflow.It is moved to quality server from development. In quality it is activated and showing no error.When a PR is created mail is send to approver and the workflow is waiting for his approval. But the work item is not available in his SAP inbox. Even he is getting the remainder mails.But the work item is not available in his business workplace(SBWP).I cross checked user ids of approvers. But still its not working ....the mails are sent to approvers external mail ID.....
Is there any configurations to make for making the SBWP active ?????
Pls anyone give me a solution for this problem...
Thanks & regards,
JayarajHello,
The best solution would be to take your mouse, move your cusror to the top part of your screen, and click on the "Before you ask (here are many workflow answers)" thread. If you've tried everything that is proposed there then please reply to this thread explaing what you have tried.
Cheers,
P. -
Blank Fields not coming in SAP Query
Hi All,
I have created an SAP Query through SQ01 to show Vendor Details. I have 5 master tables corresponding to Vendor Details: LFA1, LFB1, LFBK, BNKA, LFM1. All connected through LIFNR.
Now, my problem is when i give a company code to fetch details of all vendors corresponding to that company code, It gives me details only when the all the lifnr selected in LFB1 (Vendor Master : Company Code) is present in all other table i.e LFA1, LFBK, LFM1.
Now for one Company Code, Table LFM1 is not maintained, so if I select that Company Code, I dont get any line item in SAP Query. Ideally it shoudl be like, fields from LFM1 whould be blank but other fields from other tables should appear.
Please suggest that is there any setting in SAP Query where we can give a sort of OR condition that if data is not maintained in a table, fields from those tables are left blank instead of those line items not appearing totally.
Regards,
RaviHow did you do? I try to do a query but I don´t get Information in Query when there is no Information in a SAP table, but I want get empty fields
Please help me
Thank you -
"Clip Time" not coming through properly from P2 Cards
Hi,
I'm using Log and Transfer to bring across video shot yesterday. I setup a custom Name Preset to include the time the clip was shot at. The clips aren't coming across with the actual time they were shot though. The first few clips were shot around 7:30AM and are coming across as "01-30-09", which I'm assuming means 1:30 and 9 seconds. I checked the time on the camera (HPX-170) and it is set properly, but the timezone wasn't... it was set at 00:00, but should have been -06 :00.
The workflow so far:
1. Shot on HPX-170 to two 64GB A series P2 cards
2. Used Pansonic's P2CMS to transfer clips from camera to external hard drive (does anyone else use this software? It seems to do a good job, but is the ugliest thing ever. Any other options?)
3. Using Log and Transfer to bring clips from external drive to internal RAID.
Here's the Clip metadata:
<CreationDate>2010-09-29T07:30:09+00:00</CreationDate>
<LastUpdatePerson>stevemebs</LastUpdatePerson>
<LastUpdateDate>2010-09-29T16:04:57-06:00</LastUpdateDate>
It seems like maybe the problem is that the time zone isn't set properly on the camera, but is set properly on my computer (-06:00) so the clips were automatically adjusted to local time. Is there any way to adjust this on the clips so they come in with the proper times? Without going through and editing the metadata on all 50 clips preferably.I use ShotPut Pro. It not only will automatically create the folders, with names, and backup the cards when you insert them, but it will also do a data verification. All automated.
After you make the disk image, do you use Find & Transfer to transfer the clips directly from the P2 cards in the camera? (I'm assuming you can't transfer from the .dmg.)
NO NO NO! From the backup. Because you have those Unique file names, those names are your REEL numbers. So you can track the footage.
Gotta watch this mebs... Tapeless Workflow for FCP 7 Tutorial
Shane -
Deltas are not coming to RSA7 from SM13
Hi All,
In BW i am not getting Delta's for 2LIS_02 Datasources,
I have checked in RSA7 it is showing 0 Records, but in SM13 there are many V2 Processed Jobs.
Please can anybody help me how to get Delta's to RSA7, this problem is persist since 1 week.
Regards,
KiranHi Praveen,
I have run that, still i am not getting records in RSA7.
I have followed like this, Please correct me if i am wrong
Gone to LBWE, Selected Job Control towards 02,
Maintained Start Data is Immediate in Job Parameter,
And Scheduled Job from Job Control,
When i checked in SM37, there is no job, Only one job is in Released state for Tomorrows load.
Please let me know your views on this.
Regards,
Kiran -
Vendor not coming in RFQ from PR
Hi,
I created PR, and i checked source determination and i got fixed vendor in PR from source list...
Now while creating RFQ wrt above PR, i am getting entire details along with vendor...Now after clicking adopt + details, i can see all details of PR but vendor field is not getting fetched in RFQ..
Why?
UtsavHi,
In general:
In any businesse PR is created by the concren person who is goining to consume the material may be production people may be admin or any other dept.
Now RFQ is created by Purchase dept. again its depends on them whether they will raise the RFQ or they will raise the PO directly. As you said price flactuation , now purcharer may need to confirm from some other vendor also. So you can not say fixed vendor.
Moreover UtsavI will request you to open the PR, go to the feild fiexd vendor and read the help file.
regards
anamika -
Can not start instance SAP - ABAP Database is not available via R3trans
Dear all !
My OS : Linux RHEL 4U7 32bit
Oracle 10G R2 32bit 10.2.0.2
when system running but power off suddenly
and when power on ->
i am having problem as below when i start instance SAP (Databse Oracle Started)
Step 1 : I login user (ora<sid>) of Oracel to start up database
Database startup -> OK
then i tried to shutdown database -> OK too
and start up again -> OK
Query -> OK
I think Database do not problem
Step 2: start listener -> OK
Step 3: i login user (<sid>adm) and startup instance SAP (command : startsap r3) with error:
Checking SED Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
11:11:48 10.02.2010 LOG: Effective User Id is root
This is Saposcol Version COLL 20.90 700 - Intel x86 with Linux, PL:75, Aug 29 2006
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 6870) is already running .....
saposcol already running
ABAP Database SED must be started first
Please help me to resolve this problem
Thanks for your adviceDear all !
1. output of tnsping SED :
TNS Ping Utility for Linux: Version 10.2.0.2.0 - Production on 11-FEB-2010 13:51:24
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/SED/102_32/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD)(PROTOCOL = TCP)(HOST = sapsed)(PORT = 1527))) (CONNECT_DATA = (SID = SED) (GLOBAL_NAME = SED.WORLD)))
OK (0 msec)
2. output startsap_.log
Checking SED Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
saposcol already running
ABAP Database SED must be started first
---> output above repeats many
3. output trans.log
4 ETW000 R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 11.02.2010 - 13:49:36
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu Feb 11 13:49:36 2010 159 0.000159
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000186
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 55 0.000241
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/SED/SYS/exe/run/dboraslib.so' ...
4 ETW000 63 0.000304
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/SED/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 16430 0.016734
4 ETW000 [dev trc ,00000] Library '/usr/sap/SED/SYS/exe/run/dboraslib.so' loaded
4 ETW000 56 0.016790
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/SED/SYS/exe/run/dboraslib.so
4 ETW000 41 0.016831
4 ETW000 [dev trc ,00000] Version of '/usr/sap/SED/SYS/exe/run/dboraslib.so' is "700.08", patchlevel (0.73)
4 ETW000 94 0.016925
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/SED/SYS/exe/run/dboraslib.so
4 ETW000 38 0.016963
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/SED/SYS/exe/run/dboraslib.so
4 ETW000 68 0.017031
4 ETW000 [dev trc ,00000] New connection 0 created 44 0.017075
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 46 0.017121
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 38 0.017159
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 37 0.017196
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.017235
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 480 0.017715
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 42 0.017757
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 3789 0.021546
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 48 0.021594
4 ETW000 [dev trc ,00000] Connecting as /@SED on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 51 0.021645
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 43 0.021688
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x9511ea0 0x951750c 0x9516d94
4 ETW000 40 0.021728
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 40 0.021768
4 ETW000 [dev trc ,00000] Allocating server context handle 52 0.021820
4 ETW000 [dev trc ,00000] Attaching to DB Server SED (con_hdl=0,svchp=0x9516d20,svrhp=0x9528504)
4 ETW000 88 0.021908
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12505
4 ETW000 4712 0.026620
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12505'
4 ETW000 49 0.026669
4 ETW000 [dev trc ,00000] Try to connect with default password 62 0.026731
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@SED on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 39 0.026770
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 56 0.026826
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x9511ea0 0x951750c 0x9516d94
4 ETW000 47 0.026873
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x9528504)
4 ETW000 37 0.026910
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x9516d20,srvhp=0x9528504)
4 ETW000 37 0.026947
4 ETW000 [dev trc ,00000] Deallocating server context handle 0x9528504 45 0.026992
4 ETW000 [dev trc ,00000] Allocating server context handle 48 0.027040
4 ETW000 [dev trc ,00000] Attaching to DB Server SED (con_hdl=0,svchp=0x9516d20,svrhp=0x9528504)
4 ETW000 60 0.027100
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12505
4 ETW000 1538 0.028638
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12505'
4 ETW000 41 0.028679
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12505 performing CON [dblink#3 @ 431]
4 ETW000 131 0.028810
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12505: TNS:listener does not currently know of SID given in connect descriptor [dblink#3 @ 431]
4 ETW000 39 0.028849
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'SED'"
thansk for your help
Edited by: myfriend280985 on Feb 11, 2010 7:53 AM -
Can not delete external HD from the "Do not backup list"
I just installed and began to use Time Machine. I have two external Hard Drives (one unpartitioned, and one partitioned into the time machine drive, and another drive) attached to my macbook Pro. In the list of drives to not back up, I see the two drives listed, along with the time machine drive. I can not remove the Hard Drives from the list to be excluded. They are there, I can select them, but the minus sign is grayed out, i.e. unselectable. Therefore this external drive does not get backed up by Time Machine. Any ideas?
That's correct. Time Machine needs the hidden +File System Event Store+ kept by OSX on disks formatted as +OSX Extended.+ Using that feature is how TM can quickly figure out what's changed since the last backup, rather than examining every file and folder on the disk.
That isn't available on other formats. -
Hello,
A friend of mine recently bought a new Macbook Pro. I believe it is a 2.8 Ghz i7 model.
Anyway, they wanted to transfer all of their stuff from a 5 year old Macbook (running Snow Leopard) to their new Macbook Pro (running Lion) and they asked me for help. I suggested they run Migration Assistant from a Time Machine backup. They did that last night and everything ran fine until the very end, when they got this error message "Superdrive firmware Update 2.1 is not compatible with this version of Mac OS X." Also, it appears that nothing had been transfered.
Any suggestions?
Thanks!Thanks a lot both. The thing was that I couldn't find any DVDs that belonged to my new computer, so I just used my old Leopard DVD thinking that it didn't matter which one I used anyway. When you said it did
matter, however, I looked a little closer and found two DVDs in my new computer's box. I'm doing a clean installation as we speak.
Thank you for your help! -
My friends macbook is not coming on, my friends macbook is not coming on
my friens macbook the wote glossy mac it has the MAC OS X lion when ever we try to switch it on the stop sign the similr sigh for no enry lane sorry did not have a beter e.g and we left it on for the night and still its not even had one change
i actually got it working. i gave it a little tap on the top left hand corner on the dropped it gently on the floor and voila!!! it worked!!!
Maybe you are looking for
-
Select Query in the receiver JDBC
Hello all, Is it Possible to use the select query in eceiver JDBC. Thanks, Srinivasa
-
Where can I download the Apple yellow pages widget?
I recently had my HD replaced and the yellow pages widget is now gone. I can't find it on the Apple Dashboard widgets web page either. Can someone tell me where I can get it? It was one of the most useful widgets I had.
-
Notification Center widgets are missing
I have a late 2010 iMac and a mid 2012 Macbook Air. I have installed Yosemite on both, and while the iMac works like a charm, the Macbook Air is missing the notification center calendar, stocks, clock, calculator, reminders and weather widgets. If
-
I am VERY unhappy with your app. All I tried to do is create a multi-page PDF out of images. I have not created a single PDF with it and would like to return your app. PS: Apple does not provide refunds anymore. If I tell them in Itunes there's a pro
-
Unlocked factory refurb works on O2 and Egyptian Vodaphone but not Cyprus or Spain
I have a 4s that I got from a friend who upgraded after they got a refurbished one. We thought it was unlocked, which is what I need as I travel a lot. I used it on O2 and Vodaphone in Egypt but it won't activate when I try to use a Cypriot or Spanis