Vendor open items wise ALV Grid Display (FBL1N) report to Excel Sheet

Hi All,
I need vendor wise open items and cleared items in ALV Grid format in excel sheet.
I'm Trying that in T Code FBL1N, After the execution. I had select ALV Grid format like this From the menu bar->Settings-> Switch list.
After that i get ALV  Grid format, Then i'm doing export the data to excel sheet. like this From the Menu bar->List->Export->Spread sheet.
That time i'm getting Error Message no. 0K064, Filter criteria, sorting, totals and subtotals are not taken into account.
I want vendor wise sorting totals and subtotals,
How can i over come this Error please let me now.
Thanks,
Amar

Hi Amar,
Please check the KBA 2083705.
https://websmp230.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3230383337303526
Regards,
Monika

Similar Messages

  • Field symbol has not yet been defined-ALV Grid Display in Report

    Hi all,
              Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?

    Hi,
    <li> This is problem with fieldcatalog.
    <li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
    <li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
    Thanks
    Venkat.O

  • How can I Display my Reports in Excel sheet?

    Hello,
    I have developed my reports using oracle report Developer 6i, I am getting output in PDF and HTML CSS by the the parameter DESTYPT=HTML CSS/PDF through web.
    1.Now I want to show reports in Excel sheet also through web using 9 Internet Development Suit/9IAS .How it can be possible?
    2. Another thing is where should I deploy my all RDF reports in 9IAS?
    3. In 9IAS no Web DB listener is present so how it can be possible to run the reports through web?
    Thanks and Regards,
    Ashwani

    Hi,
    1. To display the output in Excel, refer "Output to Excel with Oracle9i Report"
    at http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
    2. The Reports RDF files will be deployed in Report server tier, i.e the place you
    have installed your Business Inteligence componentes of 9iAS.
    3. In 9 iAS, Report servlet/JSP can be run inside oc4j container. Report cgi can be
    run the default http server present in 9iAS. Refer the 9iAS rel-2 manulas for more information
    Thanks,
    Rohit

  • Reports to display vendor open items by payment methods

    Hi Gurus,
    Is there any reports to display vendor open items by payment methods?
    Thanks i

    Hi,
      Use FBl1N or F.41
    Goto Dynamic selections, Select payment method give that and execute. It will give you the report payment methd wise.
    Regards,
    Radhika.

  • Vendor Open item issue - Functional area wise

    Hi Gurus,
    We want to create Vendor Open item report using SQVI / report painter - Functional area wise, we are creating the report using BSIK table, but it is showing the credit amount coming as +ve.  We are not able extract the net amount, as it is not reconcile with FBL1N open balances.
    Please help me with your inputs with steps / procedures to design the report in SQVI, if there is no possibility, please let me know if there is any Std Report Group to achieve this functionality.
    Regards
    Naveen

    Hi Naveen,
    I would suggest you to follow following threads from Mr. Jogeswara Rao Kavala on Query reports:
    Calling Reports from an Infoset Query
    Infoset Query: User Defined Fields
    10 Useful Tips on Infoset Queries
    Alias Tables in Infosets and QuickViews
    Infoset Query: Display message in Status bar
    Regards
    Saurabh

  • Vendor open item not displayed in F-44

    Dear Gurus,
    I have vendor open item (posted via MIRO). Item is displayed correctly in FBL1N and is also in table BSIK -  but item is not seen in F-44.
    Please help
    Pavel

    Hi,
    Please check those items are selected in f110 proposals.
    Please delete the unused proposals to avoid the reported issue.
    please check the same at 152813
    Regards
    madhu M
    SDN-WIKI-PAGES
    http://wiki.sdn.sap.com/wiki/x/UgTpCw  (RUPEE WORD FORMAT)
    http://wiki.sdn.sap.com/wiki/x/8oMEDg  (J1INEMIS )
    http://wiki.sdn.sap.com/wiki/x/2BAMDg  (J1INACKN )
    http://wiki.sdn.sap.com/wiki/x/3xAMDg  (J1INCCREP)
    http://wiki.sdn.sap.com/wiki/x/6xYODg  (J1INREV  )
    Edited by: M Madhu on Nov 18, 2011 10:17 AM

  • Re:- How to see customer/vendor open items for profit center wise

    any one help me regarding : How to see customer/vendor open items for profit center wise. That is possiable or not please suggest to me. I am using 4.6c version .

    Run the report from Tcode FBL1N for vendor open item and from FBL5N fron Customer open items.
    When you get the report, click on Change Layout icon ( or press Control + F8 from keyboard), search Profit Center fron the Table of Hidden fields on the right hand side. Move that field to the Left hand side table. Click ok, now you should be able to see the Profit Center column in your report.
    You can save this layout by clicking on the Save Layout icon ( or press Control + F12 from keyboard)
    Next time you can choose the saved layout by clicking on the Select Layout icon ( or press Control + F9 from keyboard)
    Regards
    Dharmveer

  • Folder in alv grid display report

    Hi Experts,
    I have a requirement  to generate the folder in alv grid display, to display the multiple line items where ever we have.
    Actually I am displaying the material details and production order details.
    If the material is having the multiple production order details , in that case we need to place all the production order details in one folder, and if you open that folder arrow, we have to display the production order details.
    I am using REUSE_ALV_GRID_DISPLAY function module to develope this application. Here Hierseq list is recommended to use for this application, why because folder option is already available in grid display. that we can observe in CL6AN. 
    Is it possible to implement it through function modules or through OOABAP.
    Actually, I have to generate the report which we can see in CL6AN Transaction code,,
    Your valuable suggestions surely will attract the benifits.
    Thanks in advance.
    Ramesh.

    Hi ramesh,
    Hierseq list is not supported in the grid display. You could do this using an OO tree display but this could be rather complicated. What about displaying one field per material line with the number of production orders. At double-click on that field, open a second grid display (possibly as popup) to show the production order details.
    Regards,
    Clemens

  • Vendor Open Item Was Not Offset After a Replacement Check

    Hi FI Guru,
    We have an issue with vendor replacement check.  Our vendor open item still apears in FBL1N after a replacement check is paid.  We initially issued a check against a vendor invoice and we had to void that check because due to check printing problem.   The check was cancelled in FCH8.  We then issued a replacement check in F110.  When I displayed open items for the vendor in FBL1N, the vendor invoice still showed up.  The replacement check already sent to our vendor.  So we have to apply the payment to the vendor's invoice.  It seems the second transaction (for the replacement check) is incomplete because I dont't think it hits our bank account.
    Here are my questions:
    1) Is there another transaction our user needs to offset vendor invoice?
    2) If we have to fix it manually, what is the best option to offset the open vendor invoice and still be able to hit our bank account.
    Any help is appreciated. 
    Thanks!!
    Reiling

    Hi,
    In order to change the Open Item Management for a G/L account using
    ZFSEPA02 the line item total(Total of open items)for this account
    should match/tally with the account balance for this account (FS10),
    otherwise the open item activation will not be possible.
    Unfortunately as per note 175960 you find reports RFSEPA02/ RFSEPA03
    are no longer supported as of release 4.5A.
    ALTHOUGH you can find a possible solution on how to tally the line items
    to the balance in the NOTE 403744.
    1.  Active New General Ledger
             This note applies ONLY WITH RESTRICTIONS to Release ERP 2004 or ERP
             2005 with activated New General Ledger and activated document
             splitting.
             In these releases, it is not currently possible to subsequently
             activate the open item management under the specified conditions.
             The only option currently available is to set up a new account with
             open item management and to use this instead of the original
             account.
             However, it is also possible to deactivate the open item management
             using report ZFSEPA03 under the prerequisites described below.
         2.  Migration to the New GL:
             If you are planning to migrate to the new General Ledger using a
             migration type that enables the use of document splitting, ensure
             that in Phase 1 and Phase 2 NO changes are make to the open item
             management. Phases 1 and 2 indicate the period between the migration
             date and the end of the actual migration (the "Migration Completed"
             indicator is set)

  • Vendors open items are not appearing in clearing

    Hi All,
    I am able to see 10 open items in FBL1N (Vendors' open Item), but when try to post the outgoing payment through manual clearing, it displays only 6 open items. This is happening for very few vendors.
    Please help me to get rid of this problem.
    Thanks
    Manish

    Hi Manish,
    Please check that the payment is scheduled in the APP. If it is there, then you can not see those line items while trying to do manual clearing/ payment.
    You can delete the particular payment from Payment Proposal and only after that you would be able to see those specific line itmes in manual outgoing payment.
    Thanks

  • Open item amt different between the FBL1N screen and the payment screen

    Hi,
    I have a vendor open item in foreign currency and the amt shown in the FBL1N screen and the payment screen F-53 is different for this open item. The difference is because the open item is shown as per the latest exchange rate in the payment screen. The open item is revaluated according to the latest exchange rate and shown in the payment screen.
    Actually the open item should not be revaluated in the payment screen. Instead of that it should show the original invoice amount as per the invoice posting without revaluation. Is my understanding correct or the system will revaluate the open item as per the latest exchange rate and display it in the payment screen?

    Hi Raja,
    I think that the items will be revaluated while clearing.If you donot want the system to consider the same while clearing open items in local currency,in Company code global parameters select checkbox No ex.rate difference when clearing in local crcy.
    Thnaks
    Aravind

  • Vendor Open items Authorisation

    Hi Peers!
    Is there any report were i can authorise the payments to which vendor and which invoice i can pay today like that.
    Ex: Say my higher authority wants to select the open items vendor wise to pay the due. so that i will check that invoices and pay through outgoing payment.
    Pls reply soon, Its urgent
    Thanks
    Murali

    Hi
    There are so many age wise analysis reports are there for analysing the customers or vendors open items. out of those, F.41 for vendor open items there you can find all the relevant data including business area level also satisfied because in some cases higher management wants the particular business area wise required for analysis. similarly f.21 for customers.
    I hope it will be suffice your requirement.
    Regads
    madhav

  • F-44 Clear Vendor Open Items

    Hi Guru's,
    We are trying to manually clear some vendor open items using t-code F-44. For some reason we are not able to find the invoice so that we can clear when we go to F-44. However, if you go to FBL1N and pull the vendor open items as of 7/1/09 you can see the invoice listed there as an open item.
    Can someone please help me on this?
    Best Regards,
    Noopers

    Assuming the vendor document is not cleared there could be two reasons why the document is not in F-44
    - Wrong company code
    - A special G/L indicator  - Document is a special GL document and in F-44 selection screen indicator is missing.
    Try additional selection -document number.

  • Vendor Open items

    Hi,
    I am trying to use "post with clearing" transaction (F-51) and using the "outgoing payments" option there to clear the open items of the vendor. But the system is giving the message as
    "No open items found" eventhough the vendor has open invoices. The open invoices are getting diplayed in the FBL1N report as open items but I am not getting the open items list in F-04
    Please help me
    Thanks,
    Krishna Kireeti

    Hi Kireeti,
    Did u get the solutions for u r issue..
    I Got similar issue with Vendor open items..I can see few open items in Report FBl1n and BSIK table.But the same is not picking up in the F-53 manual pmnt.
    If u can share u r solution..it would be great help for me..
    Thanks in advance..
    Rgds
    Murali

  • How to clear archived vendor open items in F-44

    Hello Experts
    My user trying to clear the vendor open items through F-44.once he posted that document and he double clicking the document no, here he is getting error like below
    Express document "Update was terminated" received from author "Ravi"
    Before that he is trying to display the open item document, here he is getting error like below
    System error: Routine Beleg_Nachl info '0100-1100000001-2003-001' Not in
    BSEG/archive; inform systems administrator
        Message no. F5333
    Diagnosis
        In program routine 'Beleg_Nachle' an error
        ('0100-1100000001-2003-001') has occurred. Processing is terminated.
    Procedure
        This is caused by a program error and you should contact SAP Support.
    Can anybody please tell me how I can clear those document and also is there any possibility to get back archive data and clear it.
    Thanks in advance
    Regards
    Vamsi

    Hello!
    Please check if someone has activated the OpenFI/BTE 1650 in your 
    system.                                                                               
    Within this BTE you can change parts of the internal table where th
    data that should get displayed is in.                                                                               
    Please review the BTE, or if after you deactivate it the line item
    display works ok.                                                 
    In other cases this message can be caused due to inconsistencies, for example if ( for some reason ) there are
    entries in BKPF, BSID or BSIK or BSIS and nt in BSEG. Please  run the reports below to check inconsistencies:
    1) SAPF190 as per note 86067 if you have only the Classic GL active
    or
    2)TFC_COMPARE_VZ (tcode: FAGLF03) if they are using the NewGL.
    Regards,
    REnan

Maybe you are looking for