Version.bundle giving space errors

I'm having trouble with the Version device that was set up with FCS. Although there are 350 gigs of space available, I keep getting out of space errors. When I check a project in, it tries multiple times to copy it to the Version device, giving "error: E_FD, file write error, No space left on device" each time in the Log, and then giving an error of "Error: E_COM Error in comms channel to LDS (LDS did not complete request)" when the job fails.
If I turn off versioning, I can check in projects no problem.
I've checked permissions and added an edit in place URI to the device, as it is on XSAN. I can open up the bundle, and the subfolders allow anyone to write, but will only make files of size 0, as it thinks it is out of space. Any ideas?

Is the version.bundle located on the Xsan?
If so is that folder being stored on an Xsan affinity that has run out of space?
Nicholas Stokes
XPlatform Consulting

Similar Messages

Installing Bundle#1 in peoplesoft but it giving me error

Hi,
I want to install and ofigure SAIP, i have followed peoplebook for this purpose. It is written there that install Campus Solutions 9.0 Bundle #9 (or the multilingual version) and HCM 9.0 Maintenance Pack #4. For this i have downloaded all the required Bundles into my system. I ran change assistant and given all the files to it, it runs and after a little time giving me error that:
Invalid command in boot strap mode
Ended: Sat Feb 18 18:03:30 2012
Unsuccessful completion
i am unable to find such error resolutions on forums and over the other useful sites.
Please help me to out of this, because i have dead line which is very near and i have to implement SAIP.
Regards
Zubair Ali

Zubair wrote:
HCM 9.0 Maintenance Pack #4.
Campus Solutions 9.0 Bundles #7 and #8.
Apply Incident Resolution 768436.
My question is what will be the sequece of all Bndle and MPs? SHoud i install Mps first and then bundle? or i go with Bundles first and then Mps?The MP5 has been released and if I'm not wrong the MP5 cumulative includes all the bundles up to bundle #7. So, why not go for that MP5 then apply bundle #8 ?
Of course, you should check the prerequisites if any.
Nicolas.

PS 50301 error - No Registered Index Version for Information Space

Hi there,
I'm facing an issue with the "SAP Explorer Information Space". When I try to open the Information Space, it opens fine but when its about to load, an error message appears. "It is not possible to open Information Space. Can't load the Information Space Index. (PS 50301)"
When I click "Show Details", it displays:
"No registered index version for information space"
I'm seeing this error message after updating BO 4.0 SP4 to BO 4.0 SP6.
I did try to index the information space but it fails.
So basically the question is why did this update from BO 4.0 SP4 to BO 4.0 SP6 impact the Explorer Information Space?
Environment details:
BO 4.0 SP6 on Windows 2008 Server using Oracle 10g as back-end.
Front End: using Windows 7, Mozilla Firefox, Internet explorer.
Error Message:
Explorer Indexing Error after I tried to Index this:

The way this was solved was, I created 4 new explorer services in CMC.
1- Explorer Exploration Server
2- Explorer Indexing Server
3- Explorer Master Server
4- Explorer Search Server
After creating the new ones and running them, I deleted the old ones. Then I Indexed the Information Space and everything seemed fine.
Regards,
samique

I am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize

i am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize. I am not able to capture the content in DV mode. i am using a Firewire 800 to 400 converter and a 6 pin firewire cable to connect to the SonyHDV VTR. Please suggest me how do i do this.

The 800-400 converter plugs have proved a problem for this. What version of the software are you using. It sounds like an older version of FCP, if so you should ask your question on the Final Cut Studio forum.

Heap space error while creating XML document from Resultset

I am getting Heap space error while creating XML document from Resultset.
It was working fine from small result set object but when the size of resultset was more than 25,000, heap space error
I am already using -Xms32m -Xmx1024m
Is there a way to directly write to xml file from resultset instead of creating the whole document first and then writing it to file? Code examples please?
here is my code:
stmt = conn.prepareStatement(sql);
result = stmt.executeQuery();
result.setFetchSize(999);
Document doc = JDBCUtil.toDocument(result, Application.BANK_ID, interfaceType, Application.VERSION);
JDBCUtil.write(doc, fileName);
public static Document toDocument(ResultSet rs, String bankId, String interfaceFileType, String version)
    throws ParserConfigurationException, SQLException {
        DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
        DocumentBuilder builder = factory.newDocumentBuilder();
        Document doc = builder.newDocument();
        Element results = doc.createElement("sims");
        results.setAttribute("bank", bankId);
        results.setAttribute("record_type", "HEADER");
        results.setAttribute("file_type", interfaceFileType);
        results.setAttribute("version", version);
        doc.appendChild(results);
        ResultSetMetaData rsmd = rs.getMetaData();
        int colCount = rsmd.getColumnCount();
        String columnName="";
        Object value;
        while (rs.next()) {
            Element row = doc.createElement("rec");
            results.appendChild(row);
            for (int i = 1; i <= colCount; i++) {
                columnName = rsmd.getColumnLabel(i);
                value = rs.getObject(i);
                Element node = doc.createElement(columnName);
                if(value != null)
                    node.appendChild(doc.createTextNode(value.toString()));
                else
                    node.appendChild(doc.createTextNode(""));
                row.appendChild(node);
        return doc;
public static void write(Document document, String filename) {
        //long start = System.currentTimeMillis();
        // lets write to a file
        OutputFormat format = new OutputFormat(document); // Serialize DOM
        format.setIndent(2);
        format.setLineSeparator(System.getProperty("line.separator"));
        format.setLineWidth(80);
        try {
            FileWriter writer = new FileWriter(filename);
            BufferedWriter buf = new BufferedWriter(writer);
            XMLSerializer FileSerial = new XMLSerializer(writer, format);
            FileSerial.asDOMSerializer(); // As a DOM Serializer
            FileSerial.serialize(document);
            writer.close();
        } catch (IOException ioe) {
            ioe.printStackTrace();
        //long end = System.currentTimeMillis();
        //System.err.println("W3C File write time :" + (end - start) + " " + filename);
    }

you can increase your heap size..... try setting this as your environment variable.....
variable: JAVA_OPTS
value: -Xms512m -Xmx1024m -XX:PermSize=256m -XX:MaxPermSize=512m

Clean Install G4 Dual 1 GHz-Not enough Disk Space Error? -SLOW USB copies

HELP puhleeeeze!
This seems to be an issue on various sites with no one being able to figure out what is the cause and a solution. One person stated his problem went away with a fullwipe and clean-reinstall of everything. But this is what I did already.
What is the reason for the "Not Enough Disk Space" error message when both my hard drives have gigs of space available. If I had hair I'd be pulling it out by now! When trying to copy a file to my 2 internal hard drives that have a lot of space available, but only by the USB port?!!
I have a Power Mac G4 Mirrored Door (MDD) Dual 1 GHz with a clean install of 10.5.8 from the Original Mac OS X Leopard DVD. Both internal hard drives are 60GB and 100GB. The hard drives were wiped clean with Disc Utilities and reformatted to Mac OS Extended (Journaled). The Power Mac only has the OS and a few music apps installed. Easily over 30 GB of space left on the the main G4 interal hard drive and about 75 GB on the other internal hard drive.
The error seems to only happen when I connect a USB flash drive to the USB port. I tried to copy a 50MB update to the desktop-"Not Enough Disk Space" error message happened.
I know that the G4 MDD Power Macs only have USB 1.0. Is this a USB 2.0 issue? Another issue is that it has very slow USB speed (dramtically slower than normal USB 1.0 copying of files. And this is only when it is successful. Is it a USB format issue? I know I couldn't get an external USB 2.0 drive to mount on the Power Mac at all. Disc Utilities could see it but it still would not mount. I have a friend who has an older G4 single processor Mac that doesn't experience these issues with its USB 1.0 ports.
Now here's the kicker:
If I put in a CD disc in the DVD/RW drive, it copies with no problems to either hard drive. If I connect to the Power Mac via the ethernet network, files can copy with no problems. But any USB connection - I get a the "Not Enough Disk Space" error message. I know this is an old mac... but it's never been problematic until this latest wipe and update to Leopard 10.5.8.
Is there a solution to this? Any and all help, feedback, comments, thoughts are greatly appreciated in advance!!!

Hello everyone,
Ok, I did the ultimate task. I erased the hard drives, AGAIN. Just to start fresh from scratch. Hard drives were erased. Did a new install of Mac OS 10.5. And all was well. I could copy with no problems. I gave the computer to my friend and all was good for a couple of days and then the issue came back again. He couldn't copy anything to his internal hard drives and we received the "Not enough disk space" error message! I was baffled. A complete hard drive erase 2 times, 2 fresh Mac OS 10.5 installs and it works for a few days and then coping to HD we got the same **** problem again! THEN - I remembered that the PRAM battery was dead on this G4 Mirrored-Door Dual 1GHz PowerMac. I had recommended that he get a new battery, because this computer would always have the incorrect date and time after every restart. So with recalling this, I had him reset the PRAM by holding down the CMD+OPT+P+R keys after a restart (start-up Chime). I had him hold the keys for at least 3 start-up-chimes. Soon as the G4 Power Mac started up everything was fine again. He was able to copy files to his hard drives again with the "Not enough disk space" error message.
So everyone! Try zapping your PRAM (resetting the PRAM) and see if this solves your problem. I told my friend to get a new PRAM battery to replace the old one that is completely dead. I have not heard back from him. I will ask him again if the problem has come back.
If that fails: My only other solution would be to consider that it is possible that Mac OS 10.5 has a conflict or issue with the G4 Processors and maybe it is safer to install Mac OS 10.3 or 10.4. Because this problem only has occured after installing Mac OS 10.5, the highest version of the Mac OS the Dual 1GHz Mirrored-Door G4 can be installed.
Cheers,
B

Google search, youtube, facebook, and yahoo all giving 404 errors 9-9-13

Today I was having issues with my internet. After calling my provider (Time Warner Cable) and doing the proper troubleshooting it has boiled down to it is a problem with Firefox.
Whenever I load Firefox, I have it set so the same tabs open each time. Google, Facebook, Youtube, and Yahoo. Normally they would load and I would start my business or what-have-you, but today all are giving 404 errors. I have refresh the page it does not resolve the issue or if I manually type in the page address in, it too, does not load. Facebook will load properly once I type in the website in the bar and load it that way. If I open a new tab and try these websites (Google, Youtube, Yahoo, and Facebook) they all give me the 404 error, but if I click on the Facebook logo in the left hand corner of the page, it will load my news feed. CNN, TWC, and Gmail all load fine and I am able to use the services. Another thing I tried was disconnecting manually from my internet and then reconnecting. I changed my SSI and reset the modem several times still to no avail. If I load Google using my phone, it comes up fine, same as all the other sites listed. I restarted my computer twice (each after both resets of my modem) and I still have this problem. Now the "funny" thing now is that if I load these pages in Internet Explorer, they all load without any 404 errors. I have not tried clearing my cache or history today, and I checked the Firefox website to make sure I have the current version (I normally ALWAYS update my Firefox when it is requested). I don't want to have to uninstall Firefox I JUST got all my bookmarks back from the last uninstall I had to do (accidentally loaded an unwanted toolbar, yuck!) and also this was working fine yesterday and early this morning (2-3am central time)
ANY information regarding this issue will be welcome! Thanks!

The 404 or Not Found error message is a HTTP standard response code indicating that the client was able to communicate with the server, but the server could not find what was requested. How To Fix the 404 Not Found Error
Retry the web page by pressing F5, clicking the refresh/reload button, or trying the URL from the address bar again.
The 404 Not Found error might appear for several reasons even though no real issue exists, so sometimes a simple refresh will often load the page you were looking for.
Check for errors in the URL. Often times the 404 Not Found error appears because the URL was typed wrong or the link that was clicked on points to the wrong URL.
Move up one directory level at a time in the URL until you find something.
For example, if www.web.com/a/b/c.htm gave you the 404 Not Found error, move up to www.web.com/a/b/. If you get nothing here (or an error), move up to www.web.com/a/. This should lead you toward what you're looking for or at least confirm that it's no longer available.
Tip: If you have moved all the way up to the website's homepage, try to run a search for the information you're looking for. If the site doesn't have a search function, try navigating to the page you want using category links to dig deeper into the site.
Search for the page at a popular search engine. It's possible that you simply have the entirely wrong URL in which case a quick Google or Bing search should get you where you want to go.
If you do find the page you were after, update your bookmark or favorite to avoid the HTTP 404 error in the future.
Clear your browser's cache if you have any indication that the 404 Not Found message might just be yours. For example, if you can reach the URL from your phone but not from your tablet, clearing the cache on your tablet's browser might help.
You might also consider clearing your browser's cookies, or at least the one(s) involved with the website in question, if clearing the cache didn't work.
Change the DNS servers used by your computer but usually only if an entire website is giving you a 404 error, especially if the website is available to those on other networks (e.g. your mobile phone network or a friend in another city).
404's on an entire website isn't particularly common unless your ISP or government filters/censors websites. No matter the reason, if it does happen, giving another set of DNS servers a try is a good step to take. See my Public DNS Servers List for some alternatives.
Finally, if all else fails, contact the website directly. If they've removed the page you're after then the 404 error is completely legitimate and they should be able to tell you that. If they've moved the page, and are generating 404's instead of redirecting visitors to the new page, they might be very happy to hear from you.
A WHOIS search, using the site's domain name (e.g. weather.com) as your search term, should give you some contact information.
If the WHOIS search isn't helpful, know that many sites can be reached via email at [email protected], replacing website.com with the real website name. Contacting a site via one of their social networking profiles is another good idea.

Adding a LOV MAP in a Page resulting page (invalid name space error) error

Hi,
I am trying to add a new LOV to a region in one of the oracle product self service pages.
I am getting the LOV region displayed, but the moment I add lov mappings I am gettting the invalid name space error.
Your help on this is highly appreciated. For your reference I am attaching the error below.
ElementData.java:103) at oracle.adf.mds.internal.Cache.cacheElement(Cache.java:645) at oracle.adf.mds.internal.BaseCache.create(BaseCache.java:157) at oracle.adf.mds.internal.parse.ElementParser.startElement(ElementParser.java:222) at oracle.cabo.share.xml.TreeBuilder$Handler.startElement(Unknown Source) at oracle.cabo.share.xml.ParserAdapter.startElement(Unknown Source) at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167) at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182) at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301) at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268) at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149) at oracle.cabo.share.xml.ParserAdapter.parse(Unknown Source) at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source) at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source) at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:283) at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:115) at oracle.adf.mds.adapters.DBAdapter.getElementData(DBAdapter.java:324) at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1237) at oracle.adf.mds.MElement.findElement(MElement.java:97) at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:493) at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3783) at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3460) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:988) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418) at oa_html._OA._jspService(_OA.java:88) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:534) oracle.adf.mds.exception.MDSRuntimeException: Invalid namespace: The namespace "null" has not been registered with the MetadataManager at oracle.adf.mds.internal.MetadataManagerBase.getElementDef(MetadataManagerBase.java:330) at oracle.adf.mds.internal.ElementData.(ElementData.java:103) at oracle.adf.mds.internal.Cache.cacheElement(Cache.java:645) at oracle.adf.mds.internal.BaseCache.create(BaseCache.java:157) at oracle.adf.mds.internal.parse.ElementParser.startElement(ElementParser.java:222) at oracle.cabo.share.xml.TreeBuilder$Handler.startElement(Unknown Source) at oracle.cabo.share.xml.ParserAdapter.startElement(Unknown Source) at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167) at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182) at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301) at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268) at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149) at oracle.cabo.share.xml.ParserAdapter.parse(Unknown Source) at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source) at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source) at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:283) at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:115) at oracle.adf.mds.adapters.DBAdapter.getElementData(DBAdapter.java:324) at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1237) at oracle.adf.mds.MElement.findElement(MElement.java:97) at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:493) at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3783) at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3460) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:988) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418) at oa_html._OA._jspService(_OA.java:88) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119) at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417) at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267) at oracle.jsp.JspServlet.internalService(JspServlet.java:186) at oracle.jsp.JspServlet.service(JspServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456) at org.apache.jserv.JServConnection.run(JServConnection.java:294) at java.lang.Thread.run(Thread.java:534) ">
oracle.apps.fnd.framework.OAException: No data found for region (/oracle/apps/gl/controls/webui/ControlAssociationsPG).
     at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:527)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3783)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3460)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:988)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at _oa__html._OA._jspService(_OA.java:88)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
oracle.adf.mds.exception.MDSRuntimeException: Invalid namespace: The namespace "null" has not been registered with the MetadataManager
     at oracle.adf.mds.internal.MetadataManagerBase.getElementDef(MetadataManagerBase.java:330)
     at oracle.adf.mds.internal.ElementData.<init>(ElementData.java:103)
     at oracle.adf.mds.internal.Cache.cacheElement(Cache.java:645)
     at oracle.adf.mds.internal.BaseCache.create(BaseCache.java:157)
     at oracle.adf.mds.internal.parse.ElementParser.startElement(ElementParser.java:222)
     at oracle.cabo.share.xml.TreeBuilder$Handler.startElement(Unknown Source)
     at oracle.cabo.share.xml.ParserAdapter.startElement(Unknown Source)
     at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
     at oracle.cabo.share.xml.ParserAdapter.parse(Unknown Source)
     at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source)
     at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source)
     at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:283)
     at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:115)
     at oracle.adf.mds.adapters.DBAdapter.getElementData(DBAdapter.java:324)
     at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1237)
     at oracle.adf.mds.MElement.findElement(MElement.java:97)
     at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:493)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3783)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3460)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:988)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at _oa__html._OA._jspService(_OA.java:88)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
oracle.adf.mds.exception.MDSRuntimeException: Invalid namespace: The namespace "null" has not been registered with the MetadataManager
     at oracle.adf.mds.internal.MetadataManagerBase.getElementDef(MetadataManagerBase.java:330)
     at oracle.adf.mds.internal.ElementData.<init>(ElementData.java:103)
     at oracle.adf.mds.internal.Cache.cacheElement(Cache.java:645)
     at oracle.adf.mds.internal.BaseCache.create(BaseCache.java:157)
     at oracle.adf.mds.internal.parse.ElementParser.startElement(ElementParser.java:222)
     at oracle.cabo.share.xml.TreeBuilder$Handler.startElement(Unknown Source)
     at oracle.cabo.share.xml.ParserAdapter.startElement(Unknown Source)
     at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:167)
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1182)
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:149)
     at oracle.cabo.share.xml.ParserAdapter.parse(Unknown Source)
     at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source)
     at oracle.cabo.share.xml.TreeBuilder.parse(Unknown Source)
     at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:283)
     at oracle.adf.mds.internal.parse.ParserUtils.createNode(ParserUtils.java:115)
     at oracle.adf.mds.adapters.DBAdapter.getElementData(DBAdapter.java:324)
     at oracle.adf.mds.internal.MetadataManagerBase.findElement(MetadataManagerBase.java:1237)
     at oracle.adf.mds.MElement.findElement(MElement.java:97)
     at oracle.apps.fnd.framework.webui.JRAD2AKMapper.getRootMElement(JRAD2AKMapper.java:493)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getWebBeanTypeDataFromJRAD(OAWebBeanFactoryImpl.java:3783)
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getRootApplicationModuleClass(OAWebBeanFactoryImpl.java:3460)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:988)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at _oa__html._OA._jspService(_OA.java:88)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)

Which version are you using? I believe that adding regions started from CU2. Confirm this.
Did you set the profle FND:OA Enable Defaults? This may not be the cause for your error but I got some LOV map errors because of this. There is a thread in the forum on this.
Ensure that your path and spelling are correct. The error shows ...CostPG. Should it be ...RN perhaps? LOV Regions are usually called RN.
If all else fails open a tar.

LARGE Report | Heap space error | Scalable mode causes XDOIOException

hi,
we have a report that returns many records causing a fairly big memory consumption which results in a java heap space error.
i have read the following post 'Error: Java Heap Space with the scalable mode setting.
i activated the scalable mode feature for this report, however, after outputting the report again, i get the following exeption:
oracle.apps.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport failed: due to oracle.apps.xdo.XDOIOException
i activated the setting via the xdo.cfg in the according report-folder. the .cfg looks like this:
<config version="1.0.0" xmlns="http://xmlns.oracle.com/oxp/config/">
<properties>
<property name="xslt-scalable">true</property>
</properties>
</config>
can somebody give me a hint in which direction i should look for the error? the exeption tells me nothing to be honest.
the report works fine with less records - with activated scalable mode however ill get the exception.
would be very glad for advice.
thanks a lot.
Oracle BI Publisher: 10.1.3.4.1

- Which Application server are you using: OC4J, Weblogic?
- Did you increase the app server heap size?
- Enable the DEBUG mode to troubleshoot this issue: http://bichaos.blogspot.com/2011/04/enabling-log-messages-in-bi-publisher.html
- Start testing a small rowset and then continue increasing it until you get the error.
regards
Jorge

Flash Builder 4.5 Java Heap Space Error

Hello everyone,
I've downloaded Flash Builder 4.5 trial a few days ago. Let me first tell that I like the new features a lot and they help to speed up the development process noticably. I thank Adobe for that very much.
However I did not notice any performance boost over the Flash Buidler 4. Even worse, the 4.5 version seems to run much slower and use more memory than Flash Builder 4. I constantly keep getting Java Heap Space errors and needles to say, the tool just crashes and I have to restart it.
Here how my experience working with the new version looks like. I start the Flash Builder 4.5 which has my current project open (for the record, I still use Flex 4.1, and the project includes roughly 300+ classes and 30000+ lines of code (AS and MXML)). At the beggining everything works fine and pretty fast. UI, code completion, snippets and all other good stuff works pretty fast. However, after each build, FlashBuilder.exe process eats up from 50 to 100 megabytes of memory and does not seem to release it or reuse it. So after a 5 or 10 builds it already appears to be using over 1 GB of RAM. At that point the editor becomes sloppy - it can't keep up with my typing, code completion popups takes a few seconds to show up. And a few more builds - the Flash Builder freezes and after a minute or two I get Java Heap Space error.
I've tried increased the JRE heap space used by the Flash Builder (flashbuilder.ini, flashbuilderc.ini, eclipse.ini) to -Xms512m -Xmx1024m as well as permanent generation heap space to -XX:MaxPermSize=512m -XX:PermSize=256m and the mxml compiler (jvm.config) to -Xms384m -Xmx768m. However this did not solve the problem. Maybe just postponed it a bit.
Am I the only one observing such behaviour of Flash Builder 4.5? Does any one have any other ideas how to fix this? (by the way, I work on 64bit machine with Widnows Server 2008R2, 4GB of RAM and 2.66 GHz Intel Core 2 Duo).
Thanks in advance.
Michael

I'm seeing nearly the same thing. I also have a very large set of projects similar to what you are describing and I do have Java Heap Space errors (The details show an error of "java.lang.OutOfMemoryError: unable to create new native thread" occurring for me)
I had similar issues, although they are more frequent in the 4.5 builder, in the 4.1 builder. In 4.1 builder, I didn't get the exact same detailed error regarding threads.
I did install my flash builder into a clean instance of eclipse 3.6.2 vs using the standalone install. That shouldn't make a difference though. In 4.1, I tried he standalone install and saw the same issues I saw in the plugin version.
I'm also using the 4.1 SDK in Flash Builder 4.5 (It appears that is what you are doing). I've been attributing the crashes to the following bug in the 4.1 SDK, although I have applied the files in the bug report and still have the problem. I'm hoping when I'm able to switch to the 4.5 SDK it may help. (I can't switch yet because from what I can tell, it requires 10.2 Flash Player and my company is currently only on 10.0)
The Bug Report I'm referring to is: https://bugs.adobe.com/jira/browse/SDK-26366
I've bumped up all of the memory settings you've referred to and it helps the environment run longer, but it still eventually crashes. One thing I definately do is make sure that the "Build Automatically" is unchecked.
The machine I'm running on is an Intel 2600K with 16GB of memory running Windows 7 64-bit, so I don't think hardware is the issue.
No real answer, but your not alone in having similar issues.
Jon

Java embedding code in BPEL 2.0 giving deployment errors

Hello,
I am using Jdeveloper and SOA 6 11.1.1.0.6 version. BPEL 2.0
When i use simple sysout in the java embedding it is deploying fine but when using XMLElement api in the java embedding it s giving deployment error.
Please suggest me how to make it work.
Please see the error message below:
Error deploying archive sca_FetchAttachments_rev1.1.jar to partition "default" on server soa_server1 [http://XXX.XXX.com:8001]
[01:04:09 PM] HTTP error code returned [500]
[01:04:09 PM] Error message from server:
There was an error deploying the composite on soa_server1: Error occurred during deployment of component: FetchAttachments to service engine: implementation.bpel, for composite: FetchAttachments: ORABPEL-05250

Hello Rolando Carrasco,
Thank for responding my question. I figure out the issue. It is because we need to import the java API's what we are using in the java embedding.
Thank you,
Raj

SYSAUX out of space error(1688)

I am running the Beta version of XE and am getting SYSAUX out of space errors in the log. I've also got ORA-1688 unable to extend table SYS.WRH$_LATCH partition WRH$_LATCH_2458660294_3052 by 128 in tablespace SYSAUX.
Looking at the Storage screen in the Administration page SYSAUX is at 97.03% using 485.13 of it's 500 MB of allocated space.
Looking at the tables in SYSAUX it seems that WRI$_OPTSTAT_HISTGRM_HISTORY is taking a large amount of space. What is this table for? Can I clear it down?
Thanks,
Greg

Brad,
I just ran dbms_stats.purge_stats and passed it the current systimestamp but the size of WRI$_OPTSTAT_HISTGRM_HISTORY hasn't changed and the SYSAUX tablespace is still the same size.
Should I have run a different procedure? Or can I safely delete from the table myself (I'd rather not)

Using 10.5.8 when open mac mail keeps giving Certificate error

trying to help someone with a mac book
10.5.8
when open mac mail keeps giving certificate error.
checked and everything seems fine with settings
ssl is not turned on for incoming and outgoing
not sure what is giving them this error and trying to assist them
any suggestions would be appreciated

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Trying to update my Blackerry 9300's software to 6.0, keeps giving an error

Pls i have been tyring to update my fone's software for the past week...keeps giving an error message when its about to start downloading the software. the error says check ur internet connection or try again later..
my internet connection is fine and i cant seem to figure out what the problem is... Pls ireally need help as this is beginning to be very upsetting and disappointing

Hello angelflexy044,
Have you verified that this version of device software is available from your wireless service provider?
You can do so here:
http://us.blackberry.com/support/downloads/download_sites.jsp
If it is available you can attempt the update using one of the following methods:
http://www.blackberry.com/btsc/KB03901
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

I had earlier installed adobe dreamweaver cs3 on windows 7 my system got crashed, we have changed the hardware installed win 8.1 now dreamweaver is giving activation error exceeded activation limit please help

i had earlier installed adobe dreamweaver cs3 on windows 7 my system got crashed, we have changed the hardware installed win 8.1 now dreamweaver is giving activation error exceeded activation limit please help

Hello,
what concerns your wish about an uinstaller, so you should use
https://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html >>> AND note this "Read before you download a CS3 product". And esp, "You need your CS3 serial number to complete the installation" but this shouldn't be a problem for you, because you had an official version and so you can use all these informations like https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Hans-Günter

Version.bundle giving space errors

Similar Messages

Maybe you are looking for